valvallow

#!/bin/sh

# http://d.hatena.ne.jp/jeneshicc/20110215/1297778049

if [ -f $1 ] ; then
        case $1 in
                *.tar.bz2)   tar xvjf $1    ;;
                *.tar.gz)    tar xvzf $1    ;;
                *.tar.xz)    tar xvJf $1    ;;
                *.bz2)       bunzip2 $1     ;;

reorx

This document is still a scratch

Python Deployment

Setup A Workplace

You’ll want a directory to do this in so that you don’t screw up your machine.

AGWA

#!/bin/sh

# Enable and disable HDMI output on the Raspberry Pi

is_off ()
{
	tvservice -s | grep "TV is off" >/dev/null
}

case $1 in

zeroSteiner

#compdef msfconsole
# ------------------------------------------------------------------------------
# Copyright (c) 2014 Spencer McIntyre
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#   * Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#   * Redistributions in binary form must reproduce the above copyright

koenhendriks

# Extract archives - use: extract <file>
# Based on http://dotfiles.org/~pseup/.bashrc
function extract() {
	if [ -f "$1" ] ; then
		local filename=$(basename "$1")
		local foldername="${filename%%.*}"
		local fullpath=`perl -e 'use Cwd "abs_path";print abs_path(shift)' "$1"`
		local didfolderexist=false
		if [ -d "$foldername" ]; then
			didfolderexist=true

davidblewett

#!/bin/sh
#
# Import all SSH keys from LP
#
PREFIX=~
SSH_ASKPASS=$PREFIX/bin/lp-askpass.sh
export SSH_ASKPASS
# This is needed to force ssh-add to honor our SSH_ASKPASS.
DISPLAY=foo
export DISPLAY

enoch85

#!/bin/sh
#
# This script is used on a QNAP TS-269 PRO. https://www.en0ch.se/qnap-and-rsync/
# 
# You have to change:
# 1. $SHAREUSR
# 2. $EXCLUDES (if you want o change the name of the file servername.excludes)
# 3. $SOURCE & $DESTINATION
# 4. user@yourserver.se for the mysqldump 
# 5. --password=SUPERSECRET

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

wikimatze

function prompt_wikimatze_precmd {
  git-info
}

function prompt_wikimatze_setup {
  setopt LOCAL_OPTIONS
  unsetopt XTRACE KSH_ARRAYS
  prompt_opts=(cr percent subst)

  # Load required functions.

stewartadam

#!/bin/sh

###
### Example usage of common commands
###
# pwd
# ls # it's empty
# cd /var/log # there are some files

###