| driver=nl80211 | |
| ######################### basic hostapd configuration ########################## | |
| # | |
| interface=blue0 | |
| country_code=DE | |
| ieee80211d=1 | |
| ieee80211h=1 | |
| ieee80211w=0 | |
| channel=36 | |
| hw_mode=a | |
| ieee80211ac=1 | |
| ieee80211n=1 | |
| wmm_enabled=1 | |
| ht_capab=[LDPC][HT40+][SMPS-STATIC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][MAX-AMSDU-7935][DSSS_CCK-40] | |
| vht_capab=[MAX-MPDU-11454][RXLDPC][SHORT-GI-80][RX-STBC-1][RX-ANTENNA-PATTERN] | |
| vht_oper_chwidth=1 | |
| vht_oper_centr_freq_seg0_idx=42 | |
| logger_syslog=-1 | |
| logger_syslog_level=0 | |
| logger_stdout=-1 | |
| logger_stdout_level=0 | |
| dump_file=/tmp/hostapd.dump | |
| auth_algs=1 | |
| ctrl_interface=/var/run/hostapd | |
| ctrl_interface_group=0 | |
| ssid=SSSSSSSSSSSSSSSSSSSSSSSSSIIIIIIIIIIIIIIIIIIIIIIIIIIDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD | |
| ignore_broadcast_ssid=0 | |
| ######################### wpa hostapd configuration ############################ | |
| # | |
| wpa=2 | |
| wpa_passphrase=PAAAAAAAAAAAAAAAAAASSSSSSSSSSSSSSSSSPHRAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAASEEEEEE | |
| wpa_key_mgmt=WPA-PSK | |
| rsn_pairwise=CCMP | |
| wpa_group_rekey=600 |
| DRIVER=NL80211 | |
| COUNTRY=DE | |
| CHANNEL=36 | |
| INTERFACE=blue0 | |
| TXPOWER=48 | |
| NOSCAN=off | |
| HW_MODE=ac | |
| MACMODE=0 | |
| CLIENTISOLATION=off | |
| VHTOPSEG0=42 | |
| GTKREKEY=600 | |
| IEEE80211W=0 | |
| PWD=PAAAAAAAAAAAAAAAAAASSSSSSSSSSSSSSSSSPHRAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAASEEEEEEEEEEEEEEEEEE | |
| VHTOPCHW=1 | |
| DEBUG=0 | |
| SYSLOGLEVEL=0 | |
| ENC=wpa2+3 | |
| SSID=SSSSSSSSSSSSSSSSSSSSSSSSSIIIIIIIIIIIIIIIIIIIIIIIIIIDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD | |
| VHTCAPS=[MAX-MPDU-11454][RXLDPC][SHORT-GI-80][RX-STBC-1][RX-ANTENNA-PATTERN] | |
| HIDESSID=off | |
| APMODE=on | |
| WPAREKEY=600 | |
| HTCAPS=[LDPC][HT40+][SMPS-STATIC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][MAX-AMSDU-7935][DSSS_CCK-40] |
You need to edit the files manually, as GUI is killing them.
Don't forget to replace SSID and PASSPHRASE.
SSID and PASSPHRASESSID and PASSPHRASE