Installing iStat Server for Linux on raspbian

install-istatserver.sh

# https://bjango.com/help/istat3/linuxpackages/
# Commands used to install iStat Server for Linux on a Raspbery Pi running Raspbian

# Update Raspbian
# sudo apt-get update
# sudo apt-get upgrade

# Install dependencies
sudo apt-get install automake
sudo apt-get install libxml2-dev
sudo apt-get install libssl-dev
sudo apt-get install libsqlite3-dev

# Install optional packages
sudo apt-get install libsensors4-dev
sudo apt-get install libavahi-common-dev
sudo apt-get install libavahi-client-dev

# Download iStat Server for Linux
mkdir /home/pi/tmp
cd /home/pi/tmp
wget https://codeload.github.com/bjango/istatserverlinux/tar.gz/master -O istatserverlinux-master.tar.gz
tar -xzf istatserverlinux-master.tar.gz
cd istatserverlinux-master/

# Complile and install
./autogen
./configure
make
sudo make install

# Configure autostart & start service
sudo cp ./resource/systemd/istatserver.service /etc/systemd/system/istatserver.service
sudo systemctl daemon-reload
sudo systemctl enable istatserver.service

# Start the service
sudo service istatserver start

(FWIW I needed to run apt-get install automake for autogen to be available.)

Thank you so much! This script really takes pain out of doing things right.
However, in line 20, maybe mkdir ~/tmp would be better?
Thanks again<3

@Molin-L good to hear. You're probably right on the mkdir command. I'm not a Linux expert, but ./tmp in the home directory looks good to me.

Just add that the file with the password (necessary to activate the viewer) is located in /usr/local/etc/istatserver/istatserver.conf

Hello everyone,

I've followed this perfect installation manual on 3 Raspberries and there is one that doesn't show its temperature sensor... I don't understand why.
the istatserver.conf is exactly the same on the 3 computers.
Do you have any ideas ?
Thank you
Have a nice day.
Philippe