Simple Arduino Serial reader script in python

.gitignore

humidity_mapping.csv

monitor_serial.py

#!/usr/bin/python

# apt-get install screen python python-serial sqlite3 python-pip
# pip install pyzmail

mail_alerts = True
LOW_LIMIT = 80

import serial, time, sqlite3, signal, sys

#EXIT
def grexit(signal, frame):
#    conn.close();
    print("Bye.")
    sys.exit(0) 

signal.signal(signal.SIGINT, grexit)

# create table readings (ts integer, temp real, hum real, humt real);
conn = sqlite3.connect('temps_w_tobacco.db')
c = conn.cursor()

# XRF
serialport = '/dev/ttyACM0'
#serialport = '/dev/usbdev1.3'
baudrate = '9600'

ser = serial.Serial(serialport, baudrate)
ser.stopbits = 2

input = ''

print "Working..."

previous_ts = 0
previous_alert = 0

while True:
    input += ser.read()
    while input.find("\r\n") != -1:
        chopped_line = input[:input.find("\r\n")]
        input = input[input.find("\r\n")+2:]
        # print chopped_line
        if chopped_line.find('temperature') != -1:
            values = chopped_line.split(' ')
            if len(values) > 4:
    	        temp = values[1]
                rhum = values[3]
                thum = values[5]
                ts = int(time.time())
                # alert every 60 min
                if mail_alerts and float(thum) < LOW_LIMIT:
                    if ts - previous_alert > 3600:
                        print "Low!"
                        from pyzmail import compose_mail, send_mail
                        payload, mail_from, rcpt_to, msg_id = compose_mail((u'RPI42', '[email protected]'),
                            [(u'Alexandre', '[email protected]')], u'Humidity is low! %s' % thum, 'utf-8', None)
                        error = send_mail(payload, mail_from, rcpt_to, 'smtp.free.fr', smtp_port=25)
                        previous_alert = ts
                # log every 5 min
                if ts - previous_ts > 300:
                    print "Writing in DB."
                    c.execute("INSERT INTO readings VALUES (?, ?, ?, ?)", (ts, temp, rhum, thum))
                    conn.commit()
                    previous_ts = ts

read_serial.py

#!/usr/bin/python

# apt-get install screen python python-serial sqlite3

import serial, time, sqlite3, signal, sys

#EXIT
def grexit(signal, frame):
#    conn.close();
    print("Bye.")
    sys.exit(0) 

signal.signal(signal.SIGINT, grexit)

# XRF
serialport = '/dev/ttyACM0'
#serialport = '/dev/usbdev1.3'
baudrate = '9600'

ser = serial.Serial(serialport, baudrate)
ser.stopbits = 2

input = ''

print "Working..."

while True:
    input += ser.read()
    while input.find("\r\n") != -1:
        chopped_line = input[:input.find("\r\n")]
        input = input[input.find("\r\n")+2:]
        print chopped_line

salon.db

temps.db

temps_w_tobacco.db