Create a bootable Windows USB using macOS

bootable-win-on-mac.md

For some reason, it is surprisingly hard to create a bootable Windows USB using macOS. These are my steps for doing so, which have worked for me in macOS Monterey (12.6.1) for Windows 10 and 11. After following these steps, you should have a bootable Windows USB drive.

1. Download a Windows disc image (i.e. ISO file)

You can download Windows 10 or Windows 11 directly from Microsoft.

2. Identify your USB drive

After plugging the drive to your machine, identify the name of the USB device using diskutil list, which should return an output like the one below. In my case, the correct disk name is disk2.

/dev/disk0 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.3 GB   disk0
   1:                        EFI EFI                     314.6 MB   disk0s1
   2:                 Apple_APFS Container disk1         500.0 GB   disk0s2

/dev/disk1 (synthesized):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      APFS Container Scheme -                      +500.0 GB   disk1
                                 Physical Store disk0s2
   1:                APFS Volume MacHDD - Data           180.3 GB   disk1s1
   2:                APFS Volume MacHDD                  15.4 GB    disk1s2
   3:              APFS Snapshot com.apple.os.update-... 15.4 GB    disk1s2s1
   4:                APFS Volume Preboot                 481.8 MB   disk1s3
   5:                APFS Volume Recovery                1.1 GB     disk1s4
   6:                APFS Volume VM                      1.1 GB     disk1s5

/dev/disk2 (external, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *15.5 GB    disk2
   1:                 DOS_FAT_32 WINDOWS10               15.5 GB    disk2s1

3. Format USB drive

Format the drive with the following command, substituting disk2 with whatever is the one that corresponds in your machine.

diskutil eraseDisk MS-DOS "WINDOWS10" MBR disk2

4. Mount the Windows ISO and check its size

Mount the ISO file in your system (usually by simply double-clicking it), and verify it's listed in /Volumes—the disk name usually starts with CCCOMA_. With the disk mounted, check the size of the sources/install.wim file with the following command:

ls -lh /Volumes/CCCOMA_X64FRE_EN-US_DV9/sources/install.wim

5. Copy (almost) all files to USB drive

If sources/install.wim is less than 4GB in size, you can copy all the files from the mounted disk image onto the USB drive with the following command (notice the trailing slash in the first path!):

rsync -avh --progress /Volumes/CCCOMA_X64FRE_EN-US_DV9/ /Volumes/WINDOWS10

If sources/install.wim is more than 4GB, then we'll need to split the file before copying it. In the meantime, we can copy all the other files from the mounted image onto the USB drive with the following command (again, notice the trailing slash in the first path!):

rsync -avh --progress --exclude=sources/install.wim /Volumes/CCCOMA_X64FRE_EN-US_DV9/ /Volumes/WINDOWS10

6. Use wimlib to split and copy sources/install.wim

If sources/install.wim is more than 4GB, it is too large to copy onto a FAT32-formatted drive. Microsoft's official solution is to split the file, and there is a free utility available in macOS and Linux to do so—wimlib. The tool can be installed with Homebrew:

brew install wimlib

After installing wimlib, split and copy sources/install.wim using the following command:

wimlib-imagex split /Volumes/CCCOMA_X64FRE_EN-US_DV9/sources/install.wim /Volumes/WINDOWS10/sources/install.swm 3800

Here, 3800 means that the file should be split in 3,800MB chunks.

Finally, for the love of God, thank you so much! This is why people buy Macs :) So we don't have to deal with this stupid Microsoft BS.

On much older Macs, like 2006-2007 CMP, the EFI s in 32 bits mode. So that way, any 64 bits ISO file will not be booting, unless you modify the boot sectors of the ISO and write it to a physical DVD. With the isomacprog binary written in C , one can install Windows/Linux on 2006 machines; https://github.com/anathonous/isomacprog and https://mattgadient.com/linux-dvd-images-and-how-to-for-32-bit-efi-macs-late-2006-models/

Used this on a MacBook Pro M1, with win10 bootable. It worked just fine. Many thanks!