W600-PICO MicroPython

gistfile1.txt

    __            __
    \ \    /\    / /
     \ \  /  \  / /
      \ \/ /\ \/ / 
       \  /  \  /
       / /\  / /\ 
      / /\ \/ /\ \ 
     / /  \  /  \ \ 
    /_/    \/    \_\ 
MicroPython v1.10-282-g6a9b3cb-dirty on 2019-09-17; WinnerMicro module with W600
Type "help()" for more information.
>>> help()
Welcome to MicroPython on the W600!

For generic online docs please visit http://docs.micropython.org/

For access to the hardware use the 'machine' module:

import machine
pb26 = machine.Pin(machine.Pin.PB_26, machine.Pin.OUT, machine.Pin.PULL_DOWN)
pb26.value(1)
pb27 = machine.Pin(machine.Pin.PB_27, machine.Pin.IN, machine.Pin.PULL_UP)
print(pb27.value())

Basic WiFi configuration:

import network
sta_if = network.WLAN(network.STA_IF)
sta_if.active(True)
sta_if.scan()                             # Scan for available access points
sta_if.connect("<AP_name>", "<password>") # Connect to an AP
sta_if.isconnected()                      # Check for successful connection

Control commands:
  CTRL-A        -- on a blank line, enter raw REPL mode
  CTRL-B        -- on a blank line, enter normal REPL mode
  CTRL-C        -- interrupt a running program
  CTRL-D        -- on a blank line, do a soft reset of the board
  CTRL-E        -- on a blank line, enter paste mode

For further help on a specific object, type help(obj)
For a list of available modules, type help('modules')
>>> help('modules')
__main__          gc                re                ujson
_boot             hashlib           select            uos
_onewire          heapq             socket            urandom
_thread           io                struct            ure
array             json              sys               uselect
binascii          machine           time              usocket
builtins          math              ubinascii         ustruct
cmath             micropython       ucollections      utime
collections       network           uctypes           utimeq
ds18x20           ntptime           uerrno            uzlib
easyw600          onewire           uhashlib          w600
errno             os                uheapq            zlib
framebuf          random            uio
Plus any modules on the filesystem
>>> import easyw600
>>> help(easyw600)
object <module 'easyw600'> is of type module
  closeap -- <function closeap at 0x20018f60>
  disconnect -- <function disconnect at 0x20018f20>
  binascii -- <module 'ubinascii'>
  ftpserver -- <function ftpserver at 0x20018f70>
  w600 -- <module 'w600'>
  oneshot -- <function oneshot at 0x20018ec0>
  __name__ -- easyw600
  utime -- <module 'utime'>
  connect -- <function connect at 0x20018ee0>
  createap -- <function createap at 0x20018f40>
  scan -- <function scan at 0x20018ea0>
  network -- <module 'network'>
>>> import ds18x20
>>> help(ds18x20)
object <module 'ds18x20'> is of type module
  const -- <function>
  DS18X20 -- <class 'DS18X20'>
  __name__ -- ds18x20
>>> help(ds18x20.DS18X20)
object <class 'DS18X20'> is of type type
  __init__ -- <function __init__ at 0x200190e0>
  convert_temp -- <function convert_temp at 0x200190f0>
  scan -- <function scan at 0x200190d0>
  __qualname__ -- DS18X20
  read_scratch -- <function read_scratch at 0x20019120>
  write_scratch -- <function write_scratch at 0x20019130>
  read_temp -- <function read_temp at 0x20019140>
  __module__ -- ds18x20
>>> import w600
>>> help(w600)
object <module 'w600'> is of type module
  __name__ -- w600
  flash_read -- <function>
  flash_write -- <function>
  flash_erase -- <function>
  flash_id -- <function>
  flash_size -- <function>
  flash_user_start -- <function>
  run_ftpserver -- <function>
  version -- <function> 

start by

screen /dev/cu.wchusbserial14310 115200

kill it by
Ctr + a, k

https://www.wemos.cc/en/latest/w600/w600_pico.html