Get network device list using DNA Center.json

{

"response": [

{

"family": "Switches and Hubs",

"errorCode": "DEV-UNREACHED",

"type": "Cisco Catalyst38xx stack-able ethernet switch",

"macAddress": "f8:b7:e2:bf:eb:80",

"location": null,

"hostname": "C3850-SW01.testlab.com",

"softwareType": "IOS-XE",

"softwareVersion": "16.9.4",

"serialNumber": "FCW2137C0HL",

"collectionInterval": "Global Default",

"inventoryStatusDetail": "<status><general code=\"DEV_UNREACHED\"/></status>",

"lastUpdateTime": 1570950332462,

"upTime": "4 days, 5:21:49.34",

"role": "CORE",

"roleSource": "MANUAL",

"apManagerInterfaceIp": "",

"associatedWlcIp": "",

"bootDateTime": "2019-09-25 19:08:48",

"collectionStatus": "Partial Collection Failure",

"errorDescription": "SNMP timeouts are occurring with this device. Either the SNMP credentials are not correctly provided to controller or the device is responding slow and snmp timeout is low. If its a timeout issue, controller will attempt to progressively adjust the timeout in subsequent collection cycles to get device to managed state. User can also run discovery again only for this device using the discovery feature after adjusting the timeout and snmp credentials as required. Or user can update the timeout and snmp credentials as required using update credentials.",

"interfaceCount": "65",

"lastUpdated": "2019-10-13 07:05:32",

"lineCardCount": "2",

"lineCardId": "a45a013d-1b33-4470-bf98-8287035b76f3, 5ff5f4ff-bf33-4096-ac54-d37878cbcb99",

"locationName": null,

"managementIpAddress": "10.10.20.80",

"memorySize": "852280752",

"platformId": "WS-C3850-48P-E",

"reachabilityFailureReason": "SNMP Connectivity Failed",

"reachabilityStatus": "Unreachable",

"series": "Cisco Catalyst 3850 Series Ethernet Stackable Switch",

"snmpContact": "",

"snmpLocation": "",

"tagCount": "0",

"tunnelUdpPort": null,

"waasDeviceMode": null,

"instanceUuid": "25f64f9d-4e35-4e9f-baae-849240072be5",

"instanceTenantId": "SYS0",

"id": "25f64f9d-4e35-4e9f-baae-849240072be5"

},

{

"family": "Switches and Hubs",

"errorCode": "DEV-UNREACHED",

"type": "Cisco Catalyst 9300 Switch",

"macAddress": "f8:7b:20:71:64:00",

"location": null,

"hostname": "C9300-SW01.testlab.com",

"softwareType": "IOS-XE",

"softwareVersion": "16.9.4",

"serialNumber": "FCW2141L001",

"collectionInterval": "Global Default",

"inventoryStatusDetail": "<status><general code=\"DEV_UNREACHED\"/></status>",

"lastUpdateTime": 1570951206171,

"upTime": "2:24:23.77",

"role": "ACCESS",

"roleSource": "AUTO",

"apManagerInterfaceIp": "",

"associatedWlcIp": "",

"bootDateTime": "2019-09-25 19:05:48",

"collectionStatus": "Partial Collection Failure",

"errorDescription": "SNMP timeouts are occurring with this device. Either the SNMP credentials are not correctly provided to controller or the device is responding slow and snmp timeout is low. If its a timeout issue, controller will attempt to progressively adjust the timeout in subsequent collection cycles to get device to managed state. User can also run discovery again only for this device using the discovery feature after adjusting the timeout and snmp credentials as required. Or user can update the timeout and snmp credentials as required using update credentials.",

"interfaceCount": "47",

"lastUpdated": "2019-10-13 07:20:06",

"lineCardCount": "2",

"lineCardId": "969e1c5b-1c3b-404a-95b5-c1470dff05d3, f8e84bb2-a306-4570-87d4-a4a685bde913",

"locationName": null,

"managementIpAddress": "10.10.20.81",

"memorySize": "1452962416",

"platformId": "C9300-24UX",

"reachabilityFailureReason": "SNMP Connectivity Failed",

"reachabilityStatus": "Unreachable",

"series": "Cisco Catalyst 9300 Series Switches",

"snmpContact": "",

"snmpLocation": "",

"tagCount": "0",

"tunnelUdpPort": null,

"waasDeviceMode": null,

"instanceUuid": "630870ee-3cfe-4e3e-9678-a6520335d7b1",

"instanceTenantId": "SYS0",

"id": "630870ee-3cfe-4e3e-9678-a6520335d7b1"

},

{

"family": "Switches and Hubs",

"errorCode": "DEV-UNREACHED",

"type": "Cisco Catalyst 9300 Switch",

"macAddress": "f8:7b:20:71:53:80",

"location": null,

"hostname": "C9300-SW02.testlab.com",

"softwareType": "IOS-XE",

"softwareVersion": "16.9.4",

"serialNumber": "FCW2139G03G",

"collectionInterval": "Global Default",

"inventoryStatusDetail": "<status><general code=\"DEV_UNREACHED\"/></status>",

"lastUpdateTime": 1570950136009,

"upTime": "4 days, 4:50:13.22",

"role": "ACCESS",

"roleSource": "AUTO",

"apManagerInterfaceIp": "",

"associatedWlcIp": "",

"bootDateTime": "2019-09-25 19:05:55",

"collectionStatus": "Partial Collection Failure",

"errorDescription": "SNMP timeouts are occurring with this device. Either the SNMP credentials are not correctly provided to controller or the device is responding slow and snmp timeout is low. If its a timeout issue, controller will attempt to progressively adjust the timeout in subsequent collection cycles to get device to managed state. User can also run discovery again only for this device using the discovery feature after adjusting the timeout and snmp credentials as required. Or user can update the timeout and snmp credentials as required using update credentials.",

"interfaceCount": "45",

"lastUpdated": "2019-10-13 07:02:16",

"lineCardCount": "2",

"lineCardId": "9eda0485-9bec-46ea-ad72-6a77d25cff92, baabf034-5ce6-40ca-a38e-eb298bd9245e",

"locationName": null,

"managementIpAddress": "10.10.20.82",

"memorySize": "1452962416",

"platformId": "C9300-24UX",

"reachabilityFailureReason": "SNMP Connectivity Failed",

"reachabilityStatus": "Unreachable",

"series": "Cisco Catalyst 9300 Series Switches",

"snmpContact": "",

"snmpLocation": "",

"tagCount": "0",

"tunnelUdpPort": null,

"waasDeviceMode": null,

"instanceUuid": "9c02b48e-ca43-417e-a8bc-c9c422ec957a",

"instanceTenantId": "5be540a20700b3004c25ea95",

"id": "9c02b48e-ca43-417e-a8bc-c9c422ec957a"

}

],

"version": "1.0"

}