integration.proto

message MessageHeader0x01
{
    required int32 message_id = 1;
    optional int32 session = 2;
    optional HeaderPayLoad data;
    
    message HeaderPayLoad {
	required int32 birth_type;
	required int32 fd;
    }
}

enum MESSAGE_ID {
	// System Config 1-1000
	READ_TIME = 1;
	READ_TIME_RESPONSE = 2;
	UPDATE_TIME = 3;
	UPDATE_TIME_RESPONSE = 4;
	READ_CONF = 5;
	READ_CONF_RESPONSE = 6;
	UPDATE_CONF = 7;
	UPDATE_CONF_RESPONSE = 8;
	
	REBOOT = 9;
	REBOOT_RESPONSE = 10;
	
	// control 1001 - 2000
	READ_CONTROLLER_STATE = 1001;
	READ_CONTROLLER_STATE_RESPONSE = 1002;
	UPDATE_CONTROLLER_STATE = 1003;
	UPDATE_CONTROLLER_STATE_RESPONSE = 1004;
	
	// capture 2001 - 3000
	READ_SENSOR_DATA = 2001;
	READ_SENSOR_DATA_RESPONSE = 2002;
	SENSOR_DATA_PUSH = 2003;
	
	
	// extension 3001-4000
}

message Room {
	required int32 room_id = 1;
}

message Sensor {
	required int32 temp = 1;
	required int32 humi = 2;
	required int32 light = 3;
	required int32 co2 = 4;
}

////////////////////////////////////////////////////////////////////////////////
// System Config 1-1000
////////////////////////////////////////////////////////////////////////////////

// 1. READ_TIME只是一个动作， 不需要参数

// 2. READ_TIME_RESPONSE
message SynTime {
	required string timestamp = 1; //时间格式为："2014-01-08 22:15:42"	 
}

// 3. UPDATE_TIME
//message SynTime

//4.  UPDATE_TIME_RESPONSE
enum RESPONSE {
	OK = 1;
	// ……
}
message ResponseCode {
	required RESPONSE code = 1;
	optional string log = 2;
}

//-------------------------------------------
// 1. READ_CONF
// READ_CONF传输过程中使用的消息是conf_list， 注意required字段， 也就是说发送放将需要read的conf 的k填好， 然后填写到conf_list当中；

message Config {
	required string key = 1;
	optional int32  val = 2;
}
message ConfigList {
	repeated Config config = 1;
}

// 2. READ_CONF_RESPONSE
//message ConfList;

// 3. UPDATE_CONF
//message ConfList;

//4.UPDATE_CONF_RESPONSE;
//message ResponseCode

// REBOOT = 9;
//空

// REBOOT_RESPONSE = 10;
// message Response;

////////////////////////////////////////////////////////////////////////////////
// Control 1001-2000
////////////////////////////////////////////////////////////////////////////////


//-------------------------------------------------
// 1. READ_CONTROLLER_STATE
message Controller {
	required int32 controller_id = 1;
	enum STATE {
		OPEN = 1;
		CLOSE = 2;
		ERROR = 3;
	}
	optional STATE state = 2;
}

// 2. READ_CONTROLLER_STATE_RESPONSE
//message Controller;

// 3. UPDATE_CONTROLLER_STATE
//message Controller;

// 4. UPDATE_CONTROLLER_STATE_RESPONSE
//message ResponseCode;



////////////////////////////////////////////////////////////////////////////////
// Sensor 2001-3000
////////////////////////////////////////////////////////////////////////////////


//1. READ_SENSOR_DATA
//message Room;

//2. READ_SENSOR_DATA_RESPONSE
message SensorData {
    required Room room;
    repeated Sensor sensor;
    required SynTime time;
}
    
//3. SENSOR_DATA_PUSH
//message SensorData;