https://nofile.io/f/4H9EWzdXW3p/tp_recovery.bin
https://tftpd64.codeplex.com/downloads/get/1632548
- Configure PC with static IP 192.168.0.66/24 and tftp server.
- Place "tp_recovery.bin" in tftp server directory.
- Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file.
- Router will download file from server, write it to flash and reboot.
This can help to someone:
Run the following command, which will strip the first 512 bytes from the firmware image and create a new file called tp_recovery.bin:
dd if=original_firwmare.bin of=tp_recovery.bin bs=512 skip=1
info from here:
https://milankragujevic.com/how-to-restore-original-firmware-on-tp-link-wr840n-v6-20