Modified Cloudflare DDNS update script for OpenWRT 15.05

update_cloudflare_com_v4.sh

#!/bin/sh
#
#.Distributed under the terms of the GNU General Public License (GPL) version 2.0
#
# script for sending updates to cloudflare.com
#.based on Ben Kulbertis cloudflare-update-record.sh found at http://gist.github.com/benkulbertis
#.and on George Johnson's cf-ddns.sh found at https://github.com/gstuartj/cf-ddns.sh
#.2016-2017 Christian Schoenebeck <christian dot schoenebeck at gmail dot com>
# CloudFlare API documentation at https://api.cloudflare.com/
#
# This script is parsed by dynamic_dns_functions.sh inside send_update() function
#
# using following options from /etc/config/ddns
# option username - your cloudflare e-mail
# option password - cloudflare api key, you can get it from cloudflare.com/my-account/
# option domain   - "[email protected]"   # syntax changed to remove split_FQDN() function and tld_names.dat.gz
#
# variable __IP already defined with the ip-address to use for update
#

# check parameters
[ -z "$username" ] && write_log 14 "Service section not configured correctly! Missing key as 'username'"
[ -z "$password" ] && write_log 14 "Service section not configured correctly! Missing secret as 'password'"
[ $use_https -eq 0 ] && use_https=1     # force HTTPS

# used variables
local __HOST __DOMAIN __TYPE __URLBASE __PRGBASE __RUNPROG __DATA __IPV6 __ZONEID __RECID
local __URLBASE="https://api.cloudflare.com/client/v4"

# split __HOST __DOMAIN from $domain
# given data:
# example.com for "domain record"
# subdomain.example.com for a "host record"
__HOST=$(printf %s "$domain" | awk -F "." '{print $1}')
__DOMAIN=$(printf %s "$domain" | awk -F "." '{print $2"."$3}')

# Cloudflare v4 needs:
# __DOMAIN = the base domain i.e. example.com
# __HOST   = the FQDN of record to modify
# i.e. example.com for the "domain record" or host.sub.example.com for "host record"

# handling domain record then set __HOST = __DOMAIN
[ -z "$__HOST" ] && __HOST=$__DOMAIN
# handling host record then rebuild fqdn [email protected] => host.domain.tld
[ "$__HOST" != "$__DOMAIN" ] && __HOST="${__HOST}.${__DOMAIN}"

# set record type
[ $use_ipv6 -eq 0 ] && __TYPE="A" || __TYPE="AAAA"

# transfer function to use for godaddy
# all needed variables are set global here
# so we can use them directly
cloudflare_transfer() {
        local __CNT=0
        local __ERR
        while : ; do
                write_log 7 "#> $__RUNPROG"
                eval "$__RUNPROG"
                __ERR=$?                        # save communication error
                [ $__ERR -eq 0 ] && break       # no error break while

                write_log 3 "cURL Error: '$__ERR'"
                write_log 7 "$(cat $ERRFILE)"           # report error

                [ $VERBOSE_MODE -gt 1 ] && {
                        # VERBOSE_MODE > 1 then NO retry
                        write_log 4 "Transfer failed - Verbose Mode: $VERBOSE_MODE - NO retry on error"
                        break
                }

                __CNT=$(( $__CNT + 1 )) # increment error counter
                # if error count > retry_count leave here
                [ $retry_count -gt 0 -a $__CNT -gt $retry_count ] && \
                        write_log 14 "Transfer failed after $retry_count retries"

                write_log 4 "Transfer failed - retry $__CNT/$retry_count in $RETRY_SECONDS seconds"
                sleep $RETRY_SECONDS &
                PID_SLEEP=$!
                wait $PID_SLEEP # enable trap-handler
                PID_SLEEP=0
        done

        # check for error
        grep -q '"success":true' $DATFILE || {
                write_log 4 "CloudFlare reported an error:"
                write_log 7 "$(cat $DATFILE)"           # report error
                return 1        # HTTP-Fehler
        }
}

# Build base command to use
__PRGBASE="curl -RsS -o $DATFILE --stderr $ERRFILE"
# force network/interface-device to use for communication
if [ -n "$bind_network" ]; then
        local __DEVICE
        network_get_physdev __DEVICE $bind_network || \
                write_log 13 "Can not detect local device using 'network_get_physdev $bind_network' - Error: '$?'"
        write_log 7 "Force communication via device '$__DEVICE'"
        __PRGBASE="$__PRGBASE --interface $__DEVICE"
fi
# force ip version to use
if [ $force_ipversion -eq 1 ]; then
        [ $use_ipv6 -eq 0 ] && __PRGBASE="$__PRGBASE -4" || __PRGBASE="$__PRGBASE -6"   # force IPv4/IPv6
fi
# set certificate parameters
if [ "$cacert" = "IGNORE" ]; then       # idea from Ticket #15327 to ignore server cert
        __PRGBASE="$__PRGBASE --insecure"       # but not empty better to use "IGNORE"
elif [ -f "$cacert" ]; then
        __PRGBASE="$__PRGBASE --cacert $cacert"
elif [ -d "$cacert" ]; then
        __PRGBASE="$__PRGBASE --capath $cacert"
elif [ -n "$cacert" ]; then             # it's not a file and not a directory but given
        write_log 14 "No valid certificate(s) found at '$cacert' for HTTPS communication"
fi
# disable proxy if not set (there might be .wgetrc or .curlrc or wrong environment set)
# or check if libcurl compiled with proxy support
if [ -z "$proxy" ]; then
        __PRGBASE="$__PRGBASE --noproxy '*'"
elif [ -z "$CURL_PROXY" ]; then
        # if libcurl has no proxy support and proxy should be used then force ERROR
        write_log 13 "cURL: libcurl compiled without Proxy support"
fi
# set headers
__PRGBASE="$__PRGBASE --header 'X-Auth-Email: $username' "
__PRGBASE="$__PRGBASE --header 'X-Auth-Key: $password' "
__PRGBASE="$__PRGBASE --header 'Content-Type: application/json' "
# __PRGBASE="$__PRGBASE --header 'Accept: application/json' "

# read zone id for registered domain.TLD
__RUNPROG="$__PRGBASE --request GET '$__URLBASE/zones?name=$__DOMAIN'"
cloudflare_transfer || return 1
# extract zone id
__ZONEID=$(grep -o '"id":"[^"]*' $DATFILE | grep -o '[^"]*$' | head -1)
[ -z "$__ZONEID" ] && {
        write_log 4 "Could not detect 'zone id' for domain.tld: '$__DOMAIN'"
        return 127
}

# read record id for A or AAAA record of host.domain.TLD
__RUNPROG="$__PRGBASE --request GET '$__URLBASE/zones/$__ZONEID/dns_records?name=$__HOST&type=$__TYPE'"
cloudflare_transfer || return 1
# extract record id
__RECID=$(grep -o '"id":"[^"]*' $DATFILE | grep -o '[^"]*$' | head -1)
[ -z "$__RECID" ] && {
        write_log 4 "Could not detect 'record id' for host.domain.tld: '$__HOST'"
        return 127
}

# extract current stored IP
__DATA=$(grep -o '"content":"[^"]*' $DATFILE | grep -o '[^"]*$' | head -1)

# check data
[ $use_ipv6 -eq 0 ] \
        && __DATA=$(printf "%s" "$__DATA" | grep -m 1 -o "$IPV4_REGEX") \
        || __DATA=$(printf "%s" "$__DATA" | grep -m 1 -o "$IPV6_REGEX")

# we got data so verify
[ -n "$__DATA" ] && {
        # expand IPv6 for compare
        if [ $use_ipv6 -eq 1 ]; then
                expand_ipv6 $__IP __IPV6
                expand_ipv6 $__DATA __DATA
                [ "$__DATA" = "$__IPV6" ] && {          # IPv6 no update needed
                        write_log 7 "IPv6 at CloudFlare.com already up to date"
                        return 0
                }
        else
                [ "$__DATA" = "$__IP" ] && {            # IPv4 no update needed
                        write_log 7 "IPv4 at CloudFlare.com already up to date"
                        return 0
                }
        fi
}

# update is needed
# let's build data to send,
# use file to work around " needed for json
cat > $DATFILE << EOF
{"id":"$__ZONEID","type":"$__TYPE","name":"$__HOST","content":"$__IP"}
EOF

# let's complete transfer command
__RUNPROG="$__PRGBASE --request PUT --data @$DATFILE '$__URLBASE/zones/$__ZONEID/dns_records/$__RECID'"
cloudflare_transfer || return 1

return 0

Original: https://github.com/openwrt/packages/blob/for-15.05/net/ddns-scripts/files/update_cloudflare_com_v4.sh