Automaticlly install pptpd on Amazon EC2 Amazon Linux

pptpd.sh

# Automaticlly install pptpd on Amazon EC2 Amazon Linux
# 
# Ripped from http://blog.diahosting.com/linux-tutorial/pptpd/
# pptpd source rpm packing by it's authors
#
# WARNING:
# first ms-dns setting to 172.16.0.23, 172.16.0.23 was showing on my
# /etc/resolv.conf, I'm not sure this is the same on all Amazon AWS zones.
#
# You need to adjust your "Security Groups" which you are using too.
# The security rules which I'm using looks like:
# =================================
# ALL  tcp  0  65535 0.0.0.0/0 
# ALL  udp  0  65535 0.0.0.0/0 
# =================================
# 
# Authors: yinhm
# Version: 0.1.0
# URL: http://yinhm.appspot.com/
# Edit by: Alvin Ye
# Run by:  curl -s https://gist.github.com/999866.txt | sudo bash

yum -y install make

yum remove -y pptpd ppp ppp-devel
iptables --flush POSTROUTING --table nat
iptables --flush FORWARD
rm -rf /etc/pptpd.conf
rm -rf /etc/ppp


yum -y install rpm-build gcc
yum -y install ppp ppp-devel

mkdir ~/src
cd ~/src
wget http://yinhm.github.com/downloads/pptpd-1.3.4-1.amzn1.src.rpm

rpmbuild --rebuild pptpd-1.3.4-1.amzn1.src.rpm
rpm -i ../rpmbuild/RPMS/i386/pptpd-1.3.4-1.*.i386.rpm

sed -i 's/^logwtmp/#logwtmp/g' /etc/pptpd.conf

sed -i 's/^net.ipv4.ip_forward = 0/net.ipv4.ip_forward = 1/g' /etc/sysctl.conf
sysctl -p
echo "localip 192.168.240.1" >> /etc/pptpd.conf
echo "remoteip 192.168.240.2-100" >> /etc/pptpd.conf
echo "ms-dns 208.67.222.222" >> /etc/ppp/options.pptpd
echo "ms-dns 8.8.8.8" >> /etc/ppp/options.pptpd

pass=`openssl rand 8 -base64`
if [ "$1" != "" ]
then pass=$1
fi

echo "vpn pptpd ${pass} *" >> /etc/ppp/chap-secrets

iptables -t nat -A POSTROUTING -s 192.168.240.0/24 -j SNAT --to-source `ifconfig  | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk 'NR==1 { print $1}'`
iptables -A FORWARD -p tcp --syn -s 192.168.240.0/24 -j TCPMSS --set-mss 1356
service iptables save

chkconfig iptables on
chkconfig pptpd on

service iptables start
service pptpd start

echo -e "VPN service is installed, your VPN username is \033[1mvpn\033[0m, VPN password is \033[1m${pass}\033[1m"

not work @ west California

I try this morning , it's OK , also in California

Thanks. I will do it again. Junjun http://t.sina.com.cn/crabhit 在 2011-6-14，9:51，alvin2ye [email protected] 写到：

…

I try this morning , it's OK , same in California ## Reply to this email directly or view it on GitHub: https://gist.github.com/999866

not work @ west California

Change the first ms-dns to 172.16.0.23, it will be OK.

echo "ms-dns 208.67.222.222" >> /etc/ppp/options.pptpd

echo "ms-dns 8.8.8.8" >> /etc/ppp/options.pptpd

echo "ms-dns 172.16.0.23" >> /etc/ppp/options.pptpd
echo "ms-dns 8.8.8.8" >> /etc/ppp/options.pptpd

For x86_64 platform. there will be "pptpd: unrecognized service" error message.
Replace the pptpd package with pptpd-1.3.4-2.el6.x86_64.rpm, will resolve it.

wget http://yinhm.github.com/downloads/pptpd-1.3.4-1.amzn1.src.rpm

wget http://poptop.sourceforge.net/yum/stable/rhel6Server/x86_64/pptpd-1.3.4-2.el6.x86_64.rpm

rpmbuild --rebuild pptpd-1.3.4-1.amzn1.src.rpm

rpm -i ../rpmbuild/RPMS/i386/pptpd-1.3.4-1.*.i386.rpm

rpm -ivh pptpd-1.3.4-2.el6.x86_64.rpm

好想学 这是用什么语言编译的 小白