Skip to content

Instantly share code, notes, and snippets.

@amazingfate
Created July 25, 2022 10:29
Show Gist options
  • Save amazingfate/984768c00ed010e1215a034083310f58 to your computer and use it in GitHub Desktop.
Save amazingfate/984768c00ed010e1215a034083310f58 to your computer and use it in GitHub Desktop.
tf-boot-loop
[ 3.810266] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[ 3.810289] Linux version 5.10.66-rk35xx-g55f540ce97a3-dirty (root@f5001c1626de) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #trunk SMP Mon Jul 25 09:36:14 UTC 2022
[ 3.821015] Machine model: Radxa ROCK 5B
[ 3.821165] efi: UEFI not found.
[ 3.824791] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[ 3.824812] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[ 3.824870] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB
[ 3.824877] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
[ 3.965628] Zone ranges:
[ 3.965639] DMA [mem 0x0000000000200000-0x00000000ffffffff]
[ 3.965650] DMA32 empty
[ 3.965659] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 3.965668] Movable zone start for each node
[ 3.965673] Early memory node ranges
[ 3.965680] node 0: [mem 0x0000000000200000-0x00000000efffffff]
[ 3.965689] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 3.965699] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[ 4.005500] psci: probing for conduit method from DT.
[ 4.005512] psci: PSCIv1.1 detected in firmware.
[ 4.005518] psci: Using standard PSCI v0.2 function IDs
[ 4.005526] psci: MIGRATE_INFO_TYPE not supported.
[ 4.005533] psci: SMC Calling Convention v1.2
[ 4.005910] percpu: Embedded 30 pages/cpu s84648 r8192 d30040 u122880
[ 4.006136] Detected VIPT I-cache on CPU0
[ 4.006185] CPU features: detected: GIC system register CPU interface
[ 4.006192] CPU features: detected: Virtualization Host Extensions
[ 4.006203] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 4.006215] alternatives: patching kernel code
[ 4.006474] Built 1 zonelists, mobility grouping on. Total pages: 1999368
[ 4.006486] Kernel command line: root=UUID=cd241ec0-2d39-4532-80f1-6cae30b63976 rootwait rootfstype=ext4 console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=7 ubootpart=652d2c7f-325b-084c-86bf-d3f447e20b63 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u fw_devlink=off cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[ 4.007641] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 4.008026] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 4.008035] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 4.014096] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB)
[ 4.107453] Memory: 7601544K/8124416K available (13632K kernel code, 3052K rwdata, 5532K rodata, 5952K init, 510K bss, 260728K reserved, 262144K cma-reserved)
[ 4.107603] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 4.107639] ftrace: allocating 53889 entries in 211 pages
[ 4.193021] ftrace: allocated 211 pages with 5 groups
[ 4.193310] rcu: Hierarchical RCU implementation.
[ 4.193320] rcu: RCU event tracing is enabled.
[ 4.193327] Rude variant of Tasks RCU enabled.
[ 4.193333] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 4.198040] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 4.200727] GICv3: GIC: Using split EOI/Deactivate mode
[ 4.200736] GICv3: 480 SPIs implemented
[ 4.200742] GICv3: 0 Extended SPIs implemented
[ 4.200774] GICv3: Distributor has no Range Selector support
[ 4.200785] GICv3: 16 PPIs implemented
[ 4.200833] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[ 4.200958] ITS [mem 0xfe640000-0xfe65ffff]
[ 4.201008] ITS@0x00000000fe640000: allocated 8192 Devices @1001d0000 (indirect, esz 8, psz 64K, shr 0)
[ 4.201034] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1001e0000 (flat, esz 2, psz 64K, shr 0)
[ 4.201045] ITS: using cache flushing for cmd queue
[ 4.201083] ITS [mem 0xfe660000-0xfe67ffff]
[ 4.201127] ITS@0x00000000fe660000: allocated 8192 Devices @100200000 (indirect, esz 8, psz 64K, shr 0)
[ 4.201153] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100210000 (flat, esz 2, psz 64K, shr 0)
[ 4.201162] ITS: using cache flushing for cmd queue
[ 4.201406] GICv3: using LPI property table @0x0000000100220000
[ 4.201523] GIC: using cache flushing for LPI property table
[ 4.201534] GICv3: CPU0: using allocated LPI pending table @0x0000000100230000
[ 4.201706] random: get_random_bytes called from start_kernel+0x3d8/0x5c8 with crng_init=0
[ 4.325439] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 4.325453] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 4.325466] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 4.326749] Console: colour dummy device 80x25
[ 4.327395] printk: console [tty1] enabled
[ 4.327432] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 4.327456] pid_max: default: 32768 minimum: 301
[ 4.327613] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 4.327647] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 4.329380] rcu: Hierarchical SRCU implementation.
[ 4.330152] Platform MSI: msi-controller@fe640000 domain created
[ 4.330182] Platform MSI: msi-controller@fe660000 domain created
[ 4.330556] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[ 4.330591] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[ 4.330810] EFI services will not be available.
[ 4.331145] smp: Bringing up secondary CPUs ...
[ 4.331683] Detected VIPT I-cache on CPU1
[ 4.331717] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[ 4.331733] GICv3: CPU1: using allocated LPI pending table @0x0000000100240000
[ 4.331774] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[ 4.332379] Detected VIPT I-cache on CPU2
[ 4.332407] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[ 4.332421] GICv3: CPU2: using allocated LPI pending table @0x0000000100250000
[ 4.332460] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[ 4.333019] Detected VIPT I-cache on CPU3
[ 4.333045] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[ 4.333060] GICv3: CPU3: using allocated LPI pending table @0x0000000100260000
[ 4.333096] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[ 4.333662] CPU features: detected: Spectre-v4
[ 4.333666] Detected PIPT I-cache on CPU4
[ 4.333680] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[ 4.333689] GICv3: CPU4: using allocated LPI pending table @0x0000000100270000
[ 4.333712] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[ 4.334223] Detected PIPT I-cache on CPU5
[ 4.334238] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[ 4.334247] GICv3: CPU5: using allocated LPI pending table @0x0000000100280000
[ 4.334271] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[ 4.334813] Detected PIPT I-cache on CPU6
[ 4.334827] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[ 4.334835] GICv3: CPU6: using allocated LPI pending table @0x0000000100290000
[ 4.334859] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[ 4.335414] Detected PIPT I-cache on CPU7
[ 4.335429] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[ 4.335437] GICv3: CPU7: using allocated LPI pending table @0x00000001002a0000
[ 4.335461] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[ 4.335525] smp: Brought up 1 node, 8 CPUs
[ 4.335800] SMP: Total of 8 processors activated.
[ 4.335812] CPU features: detected: Privileged Access Never
[ 4.335825] CPU features: detected: User Access Override
[ 4.335837] CPU features: detected: 32-bit EL0 Support
[ 4.335849] CPU features: detected: Common not Private translations
[ 4.335862] CPU features: detected: RAS Extension Support
[ 4.335873] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 4.335889] CPU features: detected: CRC32 instructions
[ 4.335900] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 4.335916] CPU features: detected: RCpc load-acquire (LDAPR)
[ 4.335991] CPU: All CPU(s) started at EL2
[ 4.337818] devtmpfs: initialized
[ 4.351894] Registered cp15_barrier emulation handler
[ 4.351906] Registered setend emulation handler
[ 4.351985] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 4.351997] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 4.354917] pinctrl core: initialized pinctrl subsystem
[ 4.355190] DMI not present or invalid.
[ 4.355314] NET: Registered protocol family 16
[ 4.356217] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 4.356317] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 4.356860] thermal_sys: Registered thermal governor 'fair_share'
[ 4.356863] thermal_sys: Registered thermal governor 'step_wise'
[ 4.356869] thermal_sys: Registered thermal governor 'user_space'
[ 4.356874] thermal_sys: Registered thermal governor 'power_allocator'
[ 4.357008] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 4.357045] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[ 4.357080] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
[ 4.357113] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
[ 4.357146] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
[ 4.357180] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
[ 4.357206] cpuidle: using governor menu
[ 4.357219] Registered FIQ tty driver
[ 4.357409] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 4.357526] ASID allocator initialised with 65536 entries
[ 4.359116] printk: console [ramoops-1] enabled
[ 4.359123] pstore: Registered ramoops as persistent store backend
[ 4.359129] ramoops: using 0xf0000@0x110000, ecc: 0
[ 4.394727] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[ 4.394941] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[ 4.395142] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[ 4.395341] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[ 4.395544] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[ 4.395589] rockchip-pinctrl pinctrl: probed pinctrl
[ 4.405185] fiq_debugger fiq_debugger.0: IRQ fiq not found
[ 4.405200] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[ 4.405208] fiq_debugger_probe: could not install nmi irq handler
[ 4.405439] printk: console [ttyFIQ0] enabled
[ 4.405543] Registered fiq debugger ttyFIQ0
[ 4.405893] vcc5v0_sys: supplied by vcc12v_dcin
[ 4.406301] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
[ 4.406500] vcc5v0_host: supplied by vcc5v0_sys
[ 4.406686] vcc3v3_pcie2x1l2: regulator get failed, ret=-517
[ 4.406803] vcc3v3_pcie2x1l0: supplied by vcc5v0_sys
[ 4.406933] vcc3v3_pcie30: supplied by vcc5v0_sys
[ 4.407212] iommu: Default domain type: Translated
[ 4.407277] rk_iommu fdab9000.iommu: version = 2
[ 4.407668] rk_iommu fdb60f00.iommu: version = 2
[ 4.407857] rk_iommu fdb70f00.iommu: version = 2
[ 4.408019] rk_iommu fdb90480.iommu: version = 2
[ 4.408196] rk_iommu fdba0800.iommu: version = 2
[ 4.408376] rk_iommu fdba4800.iommu: version = 2
[ 4.408551] rk_iommu fdba8800.iommu: version = 2
[ 4.408731] rk_iommu fdbac800.iommu: version = 2
[ 4.408909] rk_iommu fdbb0800.iommu: version = 2
[ 4.409098] rk_iommu fdbdf000.iommu: version = 2
[ 4.409364] rk_iommu fdbef000.iommu: version = 2
[ 4.409634] rk_iommu fdc38700.iommu: version = 2
[ 4.409906] rk_iommu fdc48700.iommu: version = 2
[ 4.410043] rk_iommu fdd97e00.iommu: version = 2
[ 4.410329] SCSI subsystem initialized
[ 4.410408] usbcore: registered new interface driver usbfs
[ 4.410425] usbcore: registered new interface driver hub
[ 4.410443] usbcore: registered new device driver usb
[ 4.410477] mc: Linux media interface: v0.10
[ 4.410491] videodev: Linux video capture interface: v2.00
[ 4.410518] pps_core: LinuxPPS API ver. 1 registered
[ 4.410523] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 4.410534] PTP clock support registered
[ 4.410772] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[ 4.410807] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[ 4.411692] Advanced Linux Sound Architecture Driver Initialized.
[ 4.413175] rockchip-cpuinfo cpuinfo: SoC : 35880000
[ 4.413184] rockchip-cpuinfo cpuinfo: Serial : 2481a4db603cb82a
[ 4.413533] clocksource: Switched to clocksource arch_sys_counter
[ 4.820095] VFS: Disk quotas dquot_6.6.0
[ 4.820139] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.824615] NET: Registered protocol family 2
[ 4.824725] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 4.826634] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[ 4.826730] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 4.827065] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 4.827788] TCP: Hash tables configured (established 65536 bind 65536)
[ 4.827843] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[ 4.827991] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[ 4.828198] NET: Registered protocol family 1
[ 4.828500] RPC: Registered named UNIX socket transport module.
[ 4.828512] RPC: Registered udp transport module.
[ 4.828517] RPC: Registered tcp transport module.
[ 4.828522] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.828927] PCI: CLS 0 bytes, default 64
[ 4.829225] Trying to unpack rootfs image as initramfs...
[ 5.034378] Freeing initrd memory: 8464K
[ 5.035113] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 5.037805] Initialise system trusted keyrings
[ 5.037899] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 5.040526] NFS: Registering the id_resolver key type
[ 5.040544] Key type id_resolver registered
[ 5.040550] Key type id_legacy registered
[ 5.040587] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 5.040594] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 5.040613] ntfs: driver 2.1.32 [Flags: R/W].
[ 5.041076] NET: Registered protocol family 38
[ 5.041085] Key type asymmetric registered
[ 5.041092] Asymmetric key parser 'x509' registered
[ 5.041109] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 5.041116] io scheduler mq-deadline registered
[ 5.041124] io scheduler kyber registered
[ 5.048427] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
[ 5.048617] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success
[ 5.050705] rk-pcie fe190000.pcie: invalid prsnt-gpios property in node
[ 5.050898] rk-pcie fe150000.pcie: invalid prsnt-gpios property in node
[ 5.051067] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node
[ 5.051225] mpp_service mpp-srv: c71d300e4 author: Jianqun Xu 2022-06-22 video: rockchip: mpp: reset buffer members when release buffer
[ 5.051237] mpp_service mpp-srv: probe start
[ 5.052573] mpp_vepu2 jpege-ccu: probing start
[ 5.052581] mpp_vepu2 jpege-ccu: probing finish
[ 5.052702] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 4
[ 5.052916] mpp_vepu2 fdba0000.jpege-core: probing start
[ 5.053043] mpp_vepu2 fdba0000.jpege-core: attach ccu success
[ 5.053132] mpp_vepu2 fdba0000.jpege-core: probing finish
[ 5.053253] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 5
[ 5.053390] mpp_vepu2 fdba4000.jpege-core: probing start
[ 5.053489] mpp_vepu2 fdba4000.jpege-core: attach ccu success
[ 5.053678] mpp_vepu2 fdba4000.jpege-core: probing finish
[ 5.053802] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 6
[ 5.053937] mpp_vepu2 fdba8000.jpege-core: probing start
[ 5.054033] mpp_vepu2 fdba8000.jpege-core: attach ccu success
[ 5.054118] mpp_vepu2 fdba8000.jpege-core: probing finish
[ 5.054237] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 7
[ 5.054386] mpp_vepu2 fdbac000.jpege-core: probing start
[ 5.054483] mpp_vepu2 fdbac000.jpege-core: attach ccu success
[ 5.054579] mpp_vepu2 fdbac000.jpege-core: probing finish
[ 5.054835] mpp-iep2 fdbb0000.iep: Adding to iommu group 8
[ 5.054932] mpp-iep2 fdbb0000.iep: probe device
[ 5.055060] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[ 5.055122] mpp-iep2 fdbb0000.iep: probing finish
[ 5.055315] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 3
[ 5.055515] mpp_jpgdec fdb90000.jpegd: probe device
[ 5.055692] mpp_jpgdec fdb90000.jpegd: probing finish
[ 5.056000] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
[ 5.056060] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
[ 5.056164] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 11
[ 5.056416] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
[ 5.056526] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[ 5.056534] rkvdec2_init:697: No niu aclk reset resource define
[ 5.056541] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[ 5.056547] rkvdec2_init:700: No niu hclk reset resource define
[ 5.056607] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
[ 5.056614] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
[ 5.056753] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
[ 5.056760] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
[ 5.056767] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
[ 5.056773] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
[ 5.056780] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
[ 5.056812] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
[ 5.056920] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 12
[ 5.067318] rk-pcie fe150000.pcie: missing legacy IRQ resource
[ 5.067336] rk-pcie fe150000.pcie: IRQ msi not found
[ 5.067342] rk-pcie fe150000.pcie: use outband MSI support
[ 5.067349] rk-pcie fe150000.pcie: Missing *config* reg space
[ 5.067358] rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges:
[ 5.067374] rk-pcie fe150000.pcie: err 0x00f0000000..0x00f00fffff -> 0x00f0000000
[ 5.067385] rk-pcie fe150000.pcie: IO 0x00f0100000..0x00f01fffff -> 0x00f0100000
[ 5.067397] rk-pcie fe150000.pcie: MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000
[ 5.067407] rk-pcie fe150000.pcie: MEM 0x0900000000..0x093fffffff -> 0x0900000000
[ 5.067439] rk-pcie fe150000.pcie: Missing *config* reg space
[ 5.067466] rk-pcie fe150000.pcie: invalid resource
[ 5.067493] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
[ 5.067606] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[ 5.067613] rkvdec2_init:697: No niu aclk reset resource define
[ 5.067620] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[ 5.067626] rkvdec2_init:700: No niu hclk reset resource define
[ 5.067675] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
[ 5.067694] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
[ 5.067856] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
[ 5.067863] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
[ 5.067869] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
[ 5.067875] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
[ 5.067882] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
[ 5.067913] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
[ 5.068071] mpp_rkvenc2 rkvenc-ccu: probing start
[ 5.068079] mpp_rkvenc2 rkvenc-ccu: probing finish
[ 5.068198] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 9
[ 5.068371] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
[ 5.068390] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8
[ 5.068534] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
[ 5.068631] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
[ 5.068717] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 10
[ 5.068943] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
[ 5.068961] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8
[ 5.069120] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
[ 5.069208] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
[ 5.069451] mpp_av1dec: Adding child /av1d@fdc70000
[ 5.069563] mpp_av1dec: register device av1d-master
[ 5.069774] mpp_av1dec av1d-master: probing start
[ 5.069834] mpp_iommu_probe:405: failed to get device node
[ 5.069841] mpp_av1dec av1d-master: failed to attach iommu
[ 5.069972] mpp_av1dec av1d-master: probing finish
[ 5.070008] mpp_service mpp-srv: probe success
[ 5.077361] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 5.077375] dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 5.078254] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 5.078268] dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 5.079126] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 5.079139] dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 5.079461] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
[ 5.079517] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
[ 5.079568] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
[ 5.079618] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
[ 5.079668] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
[ 5.080069] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[ 5.080821] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[ 5.081911] random: fast init done
[ 5.081967] random: crng init done
[ 5.082733] rockchip-vop2 fdd90000.vop: Adding to iommu group 13
[ 5.088247] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[ 5.088267] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[ 5.088293] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[ 5.088306] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[ 5.088318] rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2
[ 5.088327] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2
[ 5.088541] [drm] failed to init overlay plane Cluster0-win1
[ 5.088579] [drm] failed to init overlay plane Cluster1-win1
[ 5.088613] [drm] failed to init overlay plane Cluster2-win1
[ 5.088646] [drm] failed to init overlay plane Cluster3-win1
[ 5.099016] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc010e53e30)
[ 5.099569] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[ 5.099754] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc010e5bb90)
[ 5.100377] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver
[ 5.100546] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc010e5bb90)
[ 5.100621] rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffffffc010e5dea0)
[ 5.100966] rockchip-drm display-subsystem: failed to parse loader memory
[ 5.101035] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[ 5.101120] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[ 5.101147] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[ 5.101662] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[ 5.106179] mali fb000000.gpu: Kernel DDK version g12p0-01eac0
[ 5.106288] mali fb000000.gpu: Power control initialization failed error = -517
[ 5.106320] mali fb000000.gpu: Device initialization Deferred
[ 5.108000] brd: module loaded
[ 5.110668] rk-pcie fe170000.pcie: missing legacy IRQ resource
[ 5.110705] rk-pcie fe170000.pcie: IRQ msi not found
[ 5.110725] rk-pcie fe170000.pcie: use outband MSI support
[ 5.110745] rk-pcie fe170000.pcie: Missing *config* reg space
[ 5.110774] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
[ 5.110815] rk-pcie fe170000.pcie: err 0x00f2000000..0x00f20fffff -> 0x00f2000000
[ 5.110853] rk-pcie fe170000.pcie: IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
[ 5.110891] rk-pcie fe170000.pcie: MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
[ 5.110923] rk-pcie fe170000.pcie: MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[ 5.110978] rk-pcie fe170000.pcie: Missing *config* reg space
[ 5.111030] rk-pcie fe170000.pcie: invalid resource
[ 5.111235] loop: module loaded
[ 5.111443] zram: Added device: zram0
[ 5.111591] lkdtm: No crash points registered, enable through debugfs
[ 5.111686] system_heap: orders[0] = 6
[ 5.111694] system_heap: orders[1] = 4
[ 5.111700] system_heap: orders[2] = 0
[ 5.113630] rockchip-spi feb20000.spi: no high_speed pinctrl state
[ 5.114340] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
[ 5.114579] rk806 spi2.0: ON: 0x40 OFF:0x0
[ 5.116579] vdd_gpu_s0: supplied by vcc5v0_sys
[ 5.117881] vdd_cpu_lit_s0: supplied by vcc5v0_sys
[ 5.118700] vdd_log_s0: supplied by vcc5v0_sys
[ 5.119496] vdd_vdenc_s0: supplied by vcc5v0_sys
[ 5.120338] vdd_ddr_s0: supplied by vcc5v0_sys
[ 5.120761] vdd2_ddr_s3: supplied by vcc5v0_sys
[ 5.121387] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
[ 5.121954] vcc_3v3_s3: supplied by vcc5v0_sys
[ 5.122494] vddq_ddr_s0: supplied by vcc5v0_sys
[ 5.123117] vcc_1v8_s3: supplied by vcc5v0_sys
[ 5.123754] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
[ 5.124391] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
[ 5.124947] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[ 5.125495] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
[ 5.126048] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[ 5.126688] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[ 5.127388] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[ 5.128009] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
[ 5.128617] vcc_3v3_s0: supplied by vcc5v0_sys
[ 5.129171] vccio_sd_s0: supplied by vcc5v0_sys
[ 5.129741] pldo6_s3: supplied by vcc5v0_sys
[ 5.130277] vcc3v3_pcie2x1l2: supplied by vcc_3v3_s3
[ 5.130284] rk806 spi2.0: no sleep-setting state
[ 5.130306] rk806 spi2.0: no reset-setting pinctrl state
[ 5.130314] rk806 spi2.0: no dvs-setting pinctrl state
[ 5.131139] rk-pcie fe190000.pcie: missing legacy IRQ resource
[ 5.131176] rk-pcie fe190000.pcie: IRQ msi not found
[ 5.131196] rk-pcie fe190000.pcie: use outband MSI support
[ 5.131216] rk-pcie fe190000.pcie: Missing *config* reg space
[ 5.131245] rk-pcie fe190000.pcie: host bridge /pcie@fe190000 ranges:
[ 5.131286] rk-pcie fe190000.pcie: err 0x00f4000000..0x00f40fffff -> 0x00f4000000
[ 5.131323] rk-pcie fe190000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000
[ 5.131363] rk-pcie fe190000.pcie: MEM 0x00f4200000..0x00f4ffffff -> 0x00f4200000
[ 5.131395] rk-pcie fe190000.pcie: MEM 0x0a00000000..0x0a3fffffff -> 0x0a00000000
[ 5.131451] rk-pcie fe190000.pcie: Missing *config* reg space
[ 5.131501] rk-pcie fe190000.pcie: invalid resource
[ 5.132767] libphy: Fixed MDIO Bus: probed
[ 5.133565] usbcore: registered new interface driver rndis_wlan
[ 5.133591] usbcore: registered new interface driver asix
[ 5.133614] usbcore: registered new interface driver cdc_ether
[ 5.133631] usbcore: registered new interface driver rndis_host
[ 5.133658] usbcore: registered new interface driver cdc_ncm
[ 5.146472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.146489] ehci-pci: EHCI PCI platform driver
[ 5.146515] ehci-platform: EHCI generic platform driver
[ 5.148918] ehci-platform fc800000.usb: EHCI Host Controller
[ 5.148936] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
[ 5.149000] ehci-platform fc800000.usb: irq 19, io mem 0xfc800000
[ 5.160209] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[ 5.160307] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 5.160319] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.160328] usb usb1: Product: EHCI Host Controller
[ 5.160335] usb usb1: Manufacturer: Linux 5.10.66-rk35xx-g55f540ce97a3-dirty ehci_hcd
[ 5.160344] usb usb1: SerialNumber: fc800000.usb
[ 5.160602] hub 1-0:1.0: USB hub found
[ 5.160621] hub 1-0:1.0: 1 port detected
[ 5.163137] ehci-platform fc880000.usb: EHCI Host Controller
[ 5.163154] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
[ 5.163210] ehci-platform fc880000.usb: irq 21, io mem 0xfc880000
[ 5.173543] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
[ 5.173626] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 5.173637] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.173646] usb usb2: Product: EHCI Host Controller
[ 5.173653] usb usb2: Manufacturer: Linux 5.10.66-rk35xx-g55f540ce97a3-dirty ehci_hcd
[ 5.173662] usb usb2: SerialNumber: fc880000.usb
[ 5.173899] hub 2-0:1.0: USB hub found
[ 5.173921] hub 2-0:1.0: 1 port detected
[ 5.174221] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.174235] ohci-platform: OHCI generic platform driver
[ 5.174374] ohci-platform fc840000.usb: Generic Platform OHCI controller
[ 5.174388] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
[ 5.174436] ohci-platform fc840000.usb: irq 20, io mem 0xfc840000
[ 5.234281] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 5.234296] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.234305] usb usb3: Product: Generic Platform OHCI controller
[ 5.234313] usb usb3: Manufacturer: Linux 5.10.66-rk35xx-g55f540ce97a3-dirty ohci_hcd
[ 5.234322] usb usb3: SerialNumber: fc840000.usb
[ 5.234553] hub 3-0:1.0: USB hub found
[ 5.234574] hub 3-0:1.0: 1 port detected
[ 5.234824] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
[ 5.234840] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4
[ 5.234892] ohci-platform fc8c0000.usb: irq 22, io mem 0xfc8c0000
[ 5.274653] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[ 5.294282] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 5.294296] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.294305] usb usb4: Product: Generic Platform OHCI controller
[ 5.294313] usb usb4: Manufacturer: Linux 5.10.66-rk35xx-g55f540ce97a3-dirty ohci_hcd
[ 5.294321] usb usb4: SerialNumber: fc8c0000.usb
[ 5.294551] hub 4-0:1.0: USB hub found
[ 5.294570] hub 4-0:1.0: 1 port detected
[ 5.295074] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[ 5.295090] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 5
[ 5.295167] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 5.295199] xhci-hcd xhci-hcd.10.auto: irq 120, io mem 0xfcd00000
[ 5.295326] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 5.295337] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.295345] usb usb5: Product: xHCI Host Controller
[ 5.295353] usb usb5: Manufacturer: Linux 5.10.66-rk35xx-g55f540ce97a3-dirty xhci-hcd
[ 5.295361] usb usb5: SerialNumber: xhci-hcd.10.auto
[ 5.295588] hub 5-0:1.0: USB hub found
[ 5.295607] hub 5-0:1.0: 1 port detected
[ 5.295742] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[ 5.295754] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 6
[ 5.295765] xhci-hcd xhci-hcd.10.auto: Host supports USB 3.0 SuperSpeed
[ 5.295798] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.295849] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 5.295859] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.295867] usb usb6: Product: xHCI Host Controller
[ 5.295875] usb usb6: Manufacturer: Linux 5.10.66-rk35xx-g55f540ce97a3-dirty xhci-hcd
[ 5.295884] usb usb6: SerialNumber: xhci-hcd.10.auto
[ 5.296104] hub 6-0:1.0: USB hub found
[ 5.296122] hub 6-0:1.0: 1 port detected
[ 5.296329] phy phy-fd5d4000.syscon:[email protected]: illegal mode
[ 5.296340] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[ 5.296352] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 7
[ 5.296438] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 5.296467] xhci-hcd xhci-hcd.11.auto: irq 121, io mem 0xfc400000
[ 5.296601] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 5.296612] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.296621] usb usb7: Product: xHCI Host Controller
[ 5.296628] usb usb7: Manufacturer: Linux 5.10.66-rk35xx-g55f540ce97a3-dirty xhci-hcd
[ 5.296637] usb usb7: SerialNumber: xhci-hcd.11.auto
[ 5.296868] hub 7-0:1.0: USB hub found
[ 5.296888] hub 7-0:1.0: 1 port detected
[ 5.297024] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[ 5.297036] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 8
[ 5.297047] xhci-hcd xhci-hcd.11.auto: Host supports USB 3.0 SuperSpeed
[ 5.297078] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.297129] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 5.297139] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.297148] usb usb8: Product: xHCI Host Controller
[ 5.297155] usb usb8: Manufacturer: Linux 5.10.66-rk35xx-g55f540ce97a3-dirty xhci-hcd
[ 5.297163] usb usb8: SerialNumber: xhci-hcd.11.auto
[ 5.297380] hub 8-0:1.0: USB hub found
[ 5.297398] hub 8-0:1.0: 1 port detected
[ 5.297591] usbcore: registered new interface driver cdc_acm
[ 5.297600] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 5.297692] usbcore: registered new interface driver uas
[ 5.297759] usbcore: registered new interface driver usb-storage
[ 5.298147] usbcore: registered new interface driver usbtouchscreen
[ 5.299285] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.8.auto/input/input0
[ 5.299601] i2c /dev entries driver
[ 5.300227] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[ 5.303219] vdd_cpu_big0_s0: supplied by vcc5v0_sys
[ 5.311761] vdd_cpu_big1_s0: supplied by vcc5v0_sys
[ 5.320638] vdd_npu_s0: supplied by vcc5v0_sys
[ 5.327465] typec_fusb302 4-0022: sw reset
[ 5.330219] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[ 5.331220] typec_fusb302 4-0022: fusb302 device ID: 0x91
[ 5.331232] typec_fusb302 4-0022: Setting usb_comm capable false
[ 5.335879] typec_fusb302 4-0022: pd := off
[ 5.335889] typec_fusb302 4-0022: vbus is already Off
[ 5.335896] typec_fusb302 4-0022: charge is already Off
[ 5.335904] typec_fusb302 4-0022: vconn is already Off
[ 5.335912] typec_fusb302 4-0022: Setting voltage/current limit 0 mV 0 mA
[ 5.335922] typec_fusb302 4-0022: polarity 0
[ 5.335931] typec_fusb302 4-0022: Requesting mux state 0, usb-role 0, orientation 0
[ 5.336762] typec_fusb302 4-0022: pd header := Sink, Device
[ 5.336791] typec_fusb302 4-0022: state change INVALID_STATE -> SNK_UNATTACHED [rev1 NONE_AMS]
[ 5.336813] typec_fusb302 4-0022: cc1=Open, cc2=Open
[ 5.336823] typec_fusb302 4-0022: CC1: 0 -> 0, CC2: 0 -> 0 [state SNK_UNATTACHED, polarity 0, disconnected]
[ 5.336834] typec_fusb302 4-0022: state change SNK_UNATTACHED -> PORT_RESET [rev1 NONE_AMS]
[ 5.336845] typec_fusb302 4-0022: 4-0022: registered
[ 5.336855] typec_fusb302 4-0022: Setting usb_comm capable false
[ 5.339090] rtc-hym8563 6-0051: rtc information is valid
[ 5.341516] typec_fusb302 4-0022: pd := off
[ 5.341524] typec_fusb302 4-0022: vbus is already Off
[ 5.341531] typec_fusb302 4-0022: charge is already Off
[ 5.341539] typec_fusb302 4-0022: vconn is already Off
[ 5.341546] typec_fusb302 4-0022: Setting voltage/current limit 0 mV 0 mA
[ 5.341558] typec_fusb302 4-0022: polarity 0
[ 5.341566] typec_fusb302 4-0022: Requesting mux state 0, usb-role 0, orientation 0
[ 5.342363] typec_fusb302 4-0022: pd header := Sink, Device
[ 5.342374] typec_fusb302 4-0022: cc:=2
[ 5.342381] typec_fusb302 4-0022: cc := Rd
[ 5.344394] rtc-hym8563 6-0051: registered as rtc0
[ 5.345403] rtc-hym8563 6-0051: setting system clock to 2022-07-25T10:27:48 UTC (1658744868)
[ 5.348238] typec_fusb302 4-0022: pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev1 NONE_AMS]
[ 5.348255] typec_fusb302 4-0022: state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 5.348266] typec_fusb302 4-0022: pending state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED @ 920 ms [rev1 NONE_AMS]
[ 5.349564] rk_hdmirx fdee0000.hdmirx-controller: No reserved memory for HDMIRX, use default CMA
[ 5.349593] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_probe: cpu_aff:0x400, Bound_cpu:4, wdt_cfg_bound_cpu:5
[ 5.350087] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 0
[ 5.350969] rk_hdmirx fdee0000.hdmirx-controller: rk_hdmirx_hdcp_register success
[ 5.350992] rk_hdmirx fdee0000.hdmirx-controller: fdee0000.hdmirx-controller driver probe ok!
[ 5.351091] usbcore: registered new interface driver uvcvideo
[ 5.351099] USB Video Class driver (1.1.1)
[ 5.352155] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[ 5.352680] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
[ 5.353230] cpu cpu0: leakage=9
[ 5.354723] cpu cpu0: pvtm=1487
[ 5.354828] cpu cpu0: pvtm-volt-sel=4
[ 5.355327] cpu cpu4: leakage=8
[ 5.356898] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[ 5.361868] cpu cpu4: pvtm=1702
[ 5.365837] cpu cpu4: pvtm-volt-sel=4
[ 5.367092] cpu cpu6: leakage=8
[ 5.373531] cpu cpu6: pvtm=1717
[ 5.373564] rk-pcie fe170000.pcie: PCIe Link up, LTSSM is 0x30011
[ 5.373747] rk-pcie fe170000.pcie: PCI host bridge to bus 0002:20
[ 5.373776] pci_bus 0002:20: root bus resource [bus 20-2f]
[ 5.373800] pci_bus 0002:20: root bus resource [??? 0xf2000000-0xf20fffff flags 0x0]
[ 5.373827] pci_bus 0002:20: root bus resource [io 0x100000-0x1fffff] (bus address [0xf2100000-0xf21fffff])
[ 5.373855] pci_bus 0002:20: root bus resource [mem 0xf2200000-0xf2ffffff]
[ 5.373878] pci_bus 0002:20: root bus resource [mem 0x980000000-0x9bfffffff pref]
[ 5.373937] pci 0002:20:00.0: [1d87:3588] type 01 class 0x060400
[ 5.373997] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 5.374090] pci 0002:20:00.0: supports D1 D2
[ 5.374110] pci 0002:20:00.0: PME# supported from D0 D1 D3hot
[ 5.380549] cpu cpu6: pvtm-volt-sel=5
[ 5.383586] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[ 5.386583] pci 0002:20:00.0: Primary bus is hard wired to 0
[ 5.386623] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[ 5.386904] pci 0002:21:00.0: [10ec:b723] type 00 class 0x028000
[ 5.387000] pci 0002:21:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 5.387101] cpu cpu0: avs=0
[ 5.387106] pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit]
[ 5.387565] pci 0002:21:00.0: supports D1 D2
[ 5.387587] pci 0002:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.387799] cpu cpu4: avs=0
[ 5.388471] cpu cpu6: avs=0
[ 5.388701] cpu cpu0: EM: created perf domain
[ 5.388757] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
[ 5.389363] cpu cpu4: EM: created perf domain
[ 5.389409] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[ 5.393554] rk-pcie fe190000.pcie: PCIe Link up, LTSSM is 0x130011
[ 5.393708] rk-pcie fe190000.pcie: PCI host bridge to bus 0004:40
[ 5.393731] pci_bus 0004:40: root bus resource [bus 40-4f]
[ 5.393749] pci_bus 0004:40: root bus resource [??? 0xf4000000-0xf40fffff flags 0x0]
[ 5.393771] pci_bus 0004:40: root bus resource [io 0x200000-0x2fffff] (bus address [0xf4100000-0xf41fffff])
[ 5.393793] pci_bus 0004:40: root bus resource [mem 0xf4200000-0xf4ffffff]
[ 5.393811] pci_bus 0004:40: root bus resource [mem 0xa00000000-0xa3fffffff pref]
[ 5.397578] pci 0004:40:00.0: [1d87:3588] type 01 class 0x060400
[ 5.397614] pci 0004:40:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 5.397683] pci 0004:40:00.0: supports D1 D2
[ 5.397699] pci 0004:40:00.0: PME# supported from D0 D1 D3hot
[ 5.408762] cpu cpu6: EM: created perf domain
[ 5.410227] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[ 5.413581] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
[ 5.413635] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 5.413692] pci 0002:20:00.0: BAR 8: assigned [mem 0xf2200000-0xf22fffff]
[ 5.413711] pci 0002:20:00.0: BAR 6: assigned [mem 0xf2300000-0xf230ffff pref]
[ 5.413730] pci 0002:20:00.0: BAR 7: assigned [io 0x100000-0x100fff]
[ 5.413750] pci 0002:21:00.0: BAR 2: assigned [mem 0xf2200000-0xf2203fff 64bit]
[ 5.413824] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[ 5.413833] pci 0002:21:00.0: BAR 0: assigned [io 0x100000-0x1000ff]
[ 5.413851] pci 0002:20:00.0: PCI bridge to [bus 21]
[ 5.413869] pci 0002:20:00.0: bridge window [io 0x100000-0x100fff]
[ 5.413885] pci 0002:20:00.0: bridge window [mem 0xf2200000-0xf22fffff]
[ 5.415082] pci 0004:40:00.0: Primary bus is hard wired to 0
[ 5.415101] pci 0004:40:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[ 5.415312] pci 0004:41:00.0: [10ec:8125] type 00 class 0x020000
[ 5.415375] pci 0004:41:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 5.415446] pci 0004:41:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
[ 5.415497] pci 0004:41:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[ 5.415850] pci 0004:41:00.0: supports D1 D2
[ 5.415863] pci 0004:41:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.417413] pcieport 0002:20:00.0: PME: Signaling with IRQ 134
[ 5.435139] pci_bus 0004:41: busn_res: [bus 41-4f] end is updated to 41
[ 5.435197] pci 0004:40:00.0: BAR 8: assigned [mem 0xf4200000-0xf42fffff]
[ 5.435218] pci 0004:40:00.0: BAR 6: assigned [mem 0xf4300000-0xf430ffff pref]
[ 5.435240] pci 0004:40:00.0: BAR 7: assigned [io 0x200000-0x200fff]
[ 5.435263] pci 0004:41:00.0: BAR 2: assigned [mem 0xf4200000-0xf420ffff 64bit]
[ 5.435316] pci 0004:41:00.0: BAR 4: assigned [mem 0xf4210000-0xf4213fff 64bit]
[ 5.435367] pci 0004:41:00.0: BAR 0: assigned [io 0x200000-0x2000ff]
[ 5.435394] pci 0004:40:00.0: PCI bridge to [bus 41]
[ 5.435411] pci 0004:40:00.0: bridge window [io 0x200000-0x200fff]
[ 5.435430] pci 0004:40:00.0: bridge window [mem 0xf4200000-0xf42fffff]
[ 5.435463] sdhci: Secure Digital Host Controller Interface driver
[ 5.435472] sdhci: Copyright(c) Pierre Ossman
[ 5.435477] Synopsys Designware Multimedia Card Interface Driver
[ 5.435759] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.436921] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[ 5.436970] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[ 5.437001] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[ 5.437051] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 67,32 bit host data width,256 deep fifo
[ 5.437060] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[ 5.437626] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.437655] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[ 5.437690] SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd
[ 5.438208] pcieport 0004:40:00.0: PME: Signaling with IRQ 144
[ 5.438295] cryptodev: driver 1.12 loaded.
[ 5.438325] hid: raw HID events driver (C) Jiri Kosina
[ 5.438655] usbcore: registered new interface driver usbhid
[ 5.438661] usbhid: USB HID core driver
[ 5.451785] optee: probing for conduit method.
[ 5.451801] optee: api uid mismatch
[ 5.451810] optee: probe of firmware:optee failed with error -22
[ 5.452259] usbcore: registered new interface driver snd-usb-audio
[ 5.460396] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card0/input1
[ 5.461997] input: rockchip-hdmi1 rockchip-hdmi1 as /devices/platform/hdmi1-sound/sound/card1/input2
[ 5.462633] Initializing XFRM netlink socket
[ 5.462647] NET: Registered protocol family 17
[ 5.462680] [BT_RFKILL]: Enter rfkill_rk_init
[ 5.462686] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 5.462880] Key type dns_resolver registered
[ 5.463473] registered taskstats version 1
[ 5.463482] Loading compiled-in X.509 certificates
[ 5.463572] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[ 5.463653] pstore: Using crash dump compression: deflate
[ 5.463851] rga3_core0 fdb60000.rga: Adding to iommu group 1
[ 5.463992] rga: rga3_core0_irq, irq = 30, match scheduler
[ 5.464167] rga: rga3_core0 driver loaded successfully ver:3.0.76831
[ 5.464183] rga: rga3_core0 probe successfully
[ 5.464393] rga3_core1 fdb70000.rga: Adding to iommu group 2
[ 5.464516] rga: rga3_core1_irq, irq = 31, match scheduler
[ 5.464647] rga: rga3_core1 driver loaded successfully ver:3.0.76831
[ 5.464663] rga: rga3_core1 probe successfully
[ 5.464850] rga: rga2_irq, irq = 32, match scheduler
[ 5.465061] rga: rga2 driver loaded successfully ver:3.2.63318
[ 5.465072] rga: rga2 probe successfully
[ 5.465343] rga: Module initialized. v1.2.14
[ 5.466903] mmc1: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[ 5.470316] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 5.485551] mali fb000000.gpu: Kernel DDK version g12p0-01eac0
[ 5.486338] mali fb000000.gpu: leakage=12
[ 5.488995] mali fb000000.gpu: pvtm=881
[ 5.490269] mali fb000000.gpu: pvtm-volt-sel=3
[ 5.491196] mali fb000000.gpu: avs=0
[ 5.492595] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[ 5.492669] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[ 5.492987] mali fb000000.gpu: GPU hardware issue table may need updating:
[ 5.492987] r0p0 status 5 is unknown; treating as r0p0 status 0
[ 5.493013] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
[ 5.493116] mali fb000000.gpu: No priority control manager is configured
[ 5.493133] mali fb000000.gpu: No memory group manager is configured
[ 5.493169] mali fb000000.gpu: Protected memory allocator not available
[ 5.494353] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'
[ 5.494379] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]
[ 5.494647] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]
[ 5.494878] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0]
[ 5.495116] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''
[ 5.498555] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model
[ 5.498737] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[ 5.501276] mali fb000000.gpu: Probed as mali0
[ 5.505346] mmc1: new HS400 MMC card at address 0001
[ 5.505858] mmcblk1: mmc1:0001 BJTD4R 29.1 GiB
[ 5.506046] mmcblk1boot0: mmc1:0001 BJTD4R partition 1 4.00 MiB
[ 5.506222] mmcblk1boot1: mmc1:0001 BJTD4R partition 2 4.00 MiB
[ 5.506406] mmcblk1rpmb: mmc1:0001 BJTD4R partition 3 4.00 MiB, chardev (237:0)
[ 5.509148] mmcblk1: p1
[ 5.520225] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
[ 5.560117] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 200000000Hz, actual 198000000HZ div = 0)
[ 5.564431] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 5.564489] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.564516] usb 1-1: Product: USB 2.0 Hub
[ 5.565376] hub 1-1:1.0: USB hub found
[ 5.565612] hub 1-1:1.0: 4 ports detected
[ 5.584658] vendor storage:20190527 ret = 0
[ 5.624501] debugfs: File 'Left Hp mixer' in directory 'dapm' already present!
[ 5.624634] debugfs: File 'Right Hp mixer' in directory 'dapm' already present!
[ 5.624735] debugfs: File 'HPCP L' in directory 'dapm' already present!
[ 5.624795] debugfs: File 'HPCP R' in directory 'dapm' already present!
[ 5.624879] debugfs: File 'HPVOL L' in directory 'dapm' already present!
[ 5.624937] debugfs: File 'HPVOL R' in directory 'dapm' already present!
[ 5.639309] rockchip_headset rk-headset: Can not read property hook_gpio
[ 5.639432] rockchip_headset rk-headset: headset have hook adc mode
[ 5.639735] input: rk-headset as /devices/platform/rk-headset/input/input3
[ 5.642359] RKNPU fdab0000.npu: Adding to iommu group 0
[ 5.642995] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[ 5.645111] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[ 5.645169] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[ 5.645199] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[ 5.645831] [drm] Initialized rknpu 0.7.2 20220428 for fdab0000.npu on minor 1
[ 5.649877] RKNPU fdab0000.npu: leakage=7
[ 5.661410] RKNPU fdab0000.npu: pvtm=902
[ 5.666831] RKNPU fdab0000.npu: pvtm-volt-sel=4
[ 5.669803] RKNPU fdab0000.npu: avs=0
[ 5.670409] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[ 5.676552] dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 267
[ 5.676675] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[ 5.678503] mmcblk0: mmc0:aaaa SM32G 29.7 GiB
[ 5.680815] RKNPU fdab0000.npu: failed to find power_model node
[ 5.680917] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[ 5.680969] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
[ 5.682164] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.686048] mmcblk0: p1
[ 5.693080] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.694135] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 5.694179] cfg80211: failed to load regulatory.db
[ 5.696128] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '09:34:50', on 'Jul 25 2022'.
[ 5.696704] Mali:
[ 5.696709] Mali device driver loaded
[ 5.696742] ALSA device list:
[ 5.696757] #0: rockchip-hdmi0
[ 5.696772] #1: rockchip-hdmi1
[ 5.696786] #2: rockchip-es8316
[ 5.696800] #3: rockchip,hdmiin
[ 5.701734] Freeing unused kernel memory: 5952K
[ 5.727304] Run /init as init process
[ 5.962283] r8125 2.5Gigabit Ethernet driver 9.009.00-NAPI-RSS loaded
[ 5.962353] r8125 0004:41:00.0: enabling device (0000 -> 0003)
[ 5.970263] usb 1-1.3: new full-speed USB device number 3 using ehci-platform
[ 5.979662] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 5.981753] r8125 Copyright (C) 2022 Realtek NIC software team <[email protected]>
[ 5.981753] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[ 5.981753] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 6.000262] r8125 0004:41:00.0 enP4p65s0: renamed from eth0
[ 6.188110] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=b002, bcdDevice= 2.00
[ 6.188241] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.188302] usb 1-1.3: Product: Bluetooth Radio
[ 6.188348] usb 1-1.3: Manufacturer: Realtek
[ 6.188391] usb 1-1.3: SerialNumber: 00e04c000001
[ 6.268463] typec_fusb302 4-0022: state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [delayed 920 ms]
[ 6.268523] typec_fusb302 4-0022: Start toggling
[ 6.273438] typec_fusb302 4-0022: start drp toggling
[ 6.273475] typec_fusb302 4-0022: state change SNK_UNATTACHED -> TOGGLING [rev1 NONE_AMS]
[ 6.275426] typec_fusb302 4-0022: IRQ: 0x80, a: 0x00, b: 0x00, status0: 0x83
[ 6.275457] typec_fusb302 4-0022: IRQ: VBUS_OK, vbus=On
[ 6.282683] typec_fusb302 4-0022: IRQ: 0x00, a: 0x40, b: 0x00, status0: 0x83
[ 6.282700] typec_fusb302 4-0022: IRQ: TOGDONE
[ 6.288573] typec_fusb302 4-0022: detected cc1=Open, cc2=Rp-3.0
[ 6.288609] typec_fusb302 4-0022: cc1=Open, cc2=Rp-3.0
[ 6.288637] typec_fusb302 4-0022: CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 6.288662] typec_fusb302 4-0022: state change TOGGLING -> SNK_ATTACH_WAIT [rev1 NONE_AMS]
[ 6.288690] typec_fusb302 4-0022: pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 200 ms [rev1 NONE_AMS]
[ 6.345976] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
[ 6.488920] typec_fusb302 4-0022: state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 200 ms]
[ 6.488987] typec_fusb302 4-0022: state change SNK_DEBOUNCED -> SNK_ATTACHED [rev1 NONE_AMS]
[ 6.489013] typec_fusb302 4-0022: polarity 1
[ 6.489036] typec_fusb302 4-0022: Requesting mux state 1, usb-role 2, orientation 2
[ 6.489974] typec_fusb302 4-0022: pd header := Sink, Device
[ 6.490004] typec_fusb302 4-0022: state change SNK_ATTACHED -> SNK_STARTUP [rev1 NONE_AMS]
[ 6.490053] typec_fusb302 4-0022: state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS]
[ 6.490079] typec_fusb302 4-0022: Setting voltage/current limit 5000 mV 3000 mA
[ 6.490106] typec_fusb302 4-0022: vbus=0 charge:=1
[ 6.490125] typec_fusb302 4-0022: vbus is already Off
[ 6.490146] typec_fusb302 4-0022: state change SNK_DISCOVERY -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS]
[ 6.495434] typec_fusb302 4-0022: pd := on
[ 6.495460] typec_fusb302 4-0022: pending state change SNK_WAIT_CAPABILITIES -> SNK_SOFT_RESET @ 620 ms [rev3 NONE_AMS]
[ 6.737541] NET: Registered protocol family 10
[ 6.739495] Segment Routing with IPv6
[ 6.765007] systemd[1]: systemd 249.11-0ubuntu3.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 6.767023] systemd[1]: Detected architecture arm64.
[ 6.770029] systemd[1]: Hostname set to <rock-5b>.
[ 7.115654] typec_fusb302 4-0022: state change SNK_WAIT_CAPABILITIES -> SNK_SOFT_RESET [delayed 620 ms]
[ 7.115713] typec_fusb302 4-0022: AMS SOFT_RESET_AMS start
[ 7.115737] typec_fusb302 4-0022: state change SNK_SOFT_RESET -> AMS_START [rev3 SOFT_RESET_AMS]
[ 7.115764] typec_fusb302 4-0022: state change AMS_START -> SOFT_RESET_SEND [rev3 SOFT_RESET_AMS]
[ 7.115788] typec_fusb302 4-0022: PD TX, header: 0x8d
[ 7.117980] typec_fusb302 4-0022: sending PD message header: 8d
[ 7.118003] typec_fusb302 4-0022: sending PD message len: 0
[ 7.119872] typec_fusb302 4-0022: IRQ: 0x41, a: 0x00, b: 0x00, status0: 0xc2
[ 7.119901] typec_fusb302 4-0022: IRQ: BC_LVL, handler pending
[ 7.121950] typec_fusb302 4-0022: IRQ: 0x41, a: 0x00, b: 0x00, status0: 0x83
[ 7.121973] typec_fusb302 4-0022: IRQ: BC_LVL, handler pending
[ 7.123912] typec_fusb302 4-0022: IRQ: 0x41, a: 0x00, b: 0x00, status0: 0x83
[ 7.123935] typec_fusb302 4-0022: IRQ: BC_LVL, handler pending
[ 7.125949] typec_fusb302 4-0022: IRQ: 0x41, a: 0x10, b: 0x00, status0: 0x83
[ 7.125974] typec_fusb302 4-0022: IRQ: BC_LVL, handler pending
[ 7.125987] typec_fusb302 4-0022: IRQ: PD retry failed
[ 7.125997] typec_fusb302 4-0022: PD TX complete, status: 2
[ 7.126012] typec_fusb302 4-0022: state change SOFT_RESET_SEND -> HARD_RESET_SEND [rev3 SOFT_RESET_AMS]
[ 7.126017] typec_fusb302 4-0022: AMS SOFT_RESET_AMS finished
[ 7.126020] typec_fusb302 4-0022: AMS HARD_RESET start
[ 7.126024] typec_fusb302 4-0022: PD TX, type: 0x5
[ 7.129001] typec_fusb302 4-0022: IRQ: 0x41, a: 0x08, b: 0x00, status0: 0x83
[ 7.129018] typec_fusb302 4-0022: IRQ: BC_LVL, handler pending
[ 7.129030] typec_fusb302 4-0022: IRQ: PD hardreset sent
[ 7.129835] typec_fusb302 4-0022: PD TX complete, status: 0
[ 7.129868] typec_fusb302 4-0022: state change HARD_RESET_SEND -> HARD_RESET_START [rev3 HARD_RESET]
[ 7.135419] typec_fusb302 4-0022: pd := off
[ 7.135473] typec_fusb302 4-0022: state change HARD_RESET_START -> SNK_HARD_RESET_SINK_OFF [rev3 HARD_RESET]
[ 7.135501] typec_fusb302 4-0022: vconn:=0
[ 7.135520] typec_fusb302 4-0022: vconn is already Off
[ 7.135541] typec_fusb302 4-0022: Requesting mux state 1, usb-role 2, orientation 2
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment