gistfile1.sh


Hello from Pinoccio!
 (Shell based on Bitlash v2.0 (c) 2014 Bill Roy)
 Custom Sketch (rev unknown)
 17838 bytes free
 Field Scout ready
> ls
function on.message.group { if (arg(1) == 8) { led.torch(250); }};
function blinkit { if (led.isoff) { led.on } else { led.off } };
> function on.d2.low { led.red(1000); }
saved
> pin.mode("d2", INPUT_PULLUP)
unexpected number
> pin.setmode("d2", INPUT_PULLUP) 
> pin.status
Note: pin.status currently only works on Serial
#   name    mode            value
---------------------------------
0   rx0     reserved        -       
1   tx0     reserved        -       
2   d2      input_pullup    1       supports PWM, supports wakeup
3   d3      unset           -       supports PWM
4   d4      unset           -       supports PWM, supports wakeup
5   d5      unset           -       supports PWM, supports wakeup
6   d6      unset           -       
7   d7      unset           -       supports wakeup
8   d8      unset           -       
9   ss      unset           -       supports wakeup
10  mosi    unset           -       supports wakeup
11  miso    unset           -       supports wakeup
12  sck     unset           -       supports wakeup
13  rx1     unset           -       supports wakeup
14  tx1     unset           -       supports wakeup
15  scl     reserved        -       supports wakeup
16  sda     reserved        -       supports wakeup
17  vcc     reserved        -       
18  batt    reserved        -       supports wakeup
19  bkpk    reserved        -       
20  chg     reserved        -       
21  ledb    reserved        -       supports PWM
22  ledr    reserved        -       supports PWM
23  ledg    reserved        -       supports PWM
24  a0      unset           -       
25  a1      unset           -       
26  a2      unset           -       
27  a3      unset           -       
28  a4      unset           -       
29  a5      unset           -       
30  a6      unset           -       
31  a7      unset           -       
> events.verbose(1)
> Running: digitalPinEventHandler(2,0,2)
Running: ledEventHandler(255,0,0)
Digital pin event handlers took 10ms
Running: digitalPinEventHandler(2,1,2)
Digital pin event handlers took 4ms
Running: ledEventHandler(0,0,0)
Running: batteryPercentageEventHandler(62)
on.battery.level event handler took 3ms
Running: temperatureEventHandler(28,82)
on.temperature event handler took 3ms
Running: digitalPinEventHandler(2,0,2)
Running: ledEventHandler(255,0,0)
Digital pin event handlers took 10ms
Running: digitalPinEventHandler(2,1,2)
Digital pin event handlers took 5ms
Running: ledEventHandler(0,0,0)