Last active
February 24, 2017 19:30
-
-
Save anddam/06f0d75b59a07eec2e05c75cd7e07db0 to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 645.454147] usb 1-2: new high-speed USB device number 6 using xhci_hcd | |
[ 645.604846] usb 1-2: New USB device found, idVendor=067b, idProduct=2773 | |
[ 645.604860] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 645.604870] usb 1-2: Product: ATAPI-6 Bridge Controller | |
[ 645.604879] usb 1-2: Manufacturer: Prolific Technology Inc. | |
[ 645.604887] usb 1-2: SerialNumber: 0123456789000000005 | |
[ 645.701780] usb-storage 1-2:1.0: USB Mass Storage device detected | |
[ 645.701957] scsi host2: usb-storage 1-2:1.0 | |
[ 645.702124] usbcore: registered new interface driver usb-storage | |
[ 645.728110] usbcore: registered new interface driver uas | |
[ 646.719847] scsi 2:0:0:0: Direct-Access ST4000DM 000-1F2168 CC52 PQ: 0 ANSI: 0 | |
[ 646.725234] sd 2:0:0:0: Attached scsi generic sg1 type 0 | |
[ 646.728382] sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). | |
[ 646.728867] sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) | |
[ 646.729407] sd 2:0:0:0: [sdb] Write Protect is off | |
[ 646.729421] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 | |
[ 646.729824] sd 2:0:0:0: [sdb] No Caching mode page found | |
[ 646.729845] sd 2:0:0:0: [sdb] Assuming drive cache: write through | |
[ 646.734757] sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). | |
[ 646.807411] sdb: sdb1 sdb2 | |
[ 646.808257] sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). | |
[ 646.812413] sd 2:0:0:0: [sdb] Attached SCSI disk | |
[ 690.501787] usb 1-2: USB disconnect, device number 6 | |
[ 713.913554] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command | |
[ 719.291380] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command | |
[ 719.499786] usb 2-1: device not accepting address 2, error -62 | |
[ 720.731015] usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd | |
[ 720.759049] usb 2-1: device descriptor read/8, error -71 | |
[ 720.864013] usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd | |
[ 720.917973] usb 2-1: device descriptor read/8, error -71 | |
[ 721.954322] usb 2-1: new SuperSpeed USB device number 4 using xhci_hcd | |
[ 721.973709] usb 2-1: New USB device found, idVendor=067b, idProduct=2773 | |
[ 721.973723] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 721.973733] usb 2-1: Product: ATAPI-6 Bridge Controller | |
[ 721.973742] usb 2-1: Manufacturer: Prolific Technology Inc. | |
[ 721.973750] usb 2-1: SerialNumber: 0123456789000000005 | |
[ 721.981542] usb 2-1: Set SEL for device-initiated U1 failed. | |
[ 721.981612] usb 2-1: Set SEL for device-initiated U2 failed. | |
[ 721.981904] usb-storage 2-1:1.0: USB Mass Storage device detected | |
[ 721.992242] scsi host2: usb-storage 2-1:1.0 | |
[ 744.522166] usb 2-1: reset SuperSpeed USB device number 4 using xhci_hcd | |
[ 744.542326] usb 2-1: Set SEL for device-initiated U1 failed. | |
[ 744.542360] usb 2-1: Set SEL for device-initiated U2 failed. | |
# UNPLUGGING, TRYING THE LAPTOP (WORKING) AND PLUGGIN BACK ON THIS SYSTEM AGAIN | |
[ 6982.958355] usb 2-1: new SuperSpeed USB device number 8 using xhci_hcd | |
[ 6982.978341] usb 2-1: New USB device found, idVendor=067b, idProduct=2773 | |
[ 6982.978355] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 6982.978364] usb 2-1: Product: ATAPI-6 Bridge Controller | |
[ 6982.978373] usb 2-1: Manufacturer: Prolific Technology Inc. | |
[ 6982.978382] usb 2-1: SerialNumber: 0123456789000000005 | |
[ 6982.980276] usb 2-1: Set SEL for device-initiated U1 failed. | |
[ 6982.980365] usb 2-1: Set SEL for device-initiated U2 failed. | |
[ 6982.980726] usb-storage 2-1:1.0: USB Mass Storage device detected | |
[ 6982.987341] scsi host2: usb-storage 2-1:1.0 | |
[ 6983.998858] scsi 2:0:0:0: Direct-Access ST4000DM 000-1F2168 CC52 PQ: 0 ANSI: 0 | |
[ 6984.007098] sd 2:0:0:0: Attached scsi generic sg1 type 0 | |
[ 6984.007263] sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). | |
[ 6984.007779] sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) | |
[ 6984.008260] sd 2:0:0:0: [sdb] Write Protect is off | |
[ 6984.008277] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 | |
[ 6984.008605] sd 2:0:0:0: [sdb] No Caching mode page found | |
[ 6984.008619] sd 2:0:0:0: [sdb] Assuming drive cache: write through | |
[ 6984.011826] sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). | |
[ 6984.115019] sdb: sdb1 sdb2 | |
[ 6984.115797] sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). | |
[ 6984.116435] sd 2:0:0:0: [sdb] Attached SCSI disk |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 8271.925957] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd | |
[ 8271.939442] usb 2-2: New USB device found, idVendor=067b, idProduct=2773 | |
[ 8271.939455] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 8271.939463] usb 2-2: Product: ATAPI-6 Bridge Controller | |
[ 8271.939470] usb 2-2: Manufacturer: Prolific Technology Inc. | |
[ 8271.939475] usb 2-2: SerialNumber: 0123456789000000005 | |
[ 8271.940366] usb 2-2: Set SEL for device-initiated U1 failed. | |
[ 8271.940429] usb 2-2: Set SEL for device-initiated U2 failed. | |
[ 8271.940671] usb-storage 2-2:1.0: USB Mass Storage device detected | |
[ 8271.940993] scsi host4: usb-storage 2-2:1.0 | |
[ 8272.939535] scsi 4:0:0:0: Direct-Access ST4000DM 000-1F2168 CC52 PQ: 0 ANSI: 0 | |
[ 8272.941155] sd 4:0:0:0: Attached scsi generic sg1 type 0 | |
[ 8272.941732] sd 4:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). | |
[ 8272.942009] sd 4:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) | |
[ 8272.942443] sd 4:0:0:0: [sdb] Write Protect is off | |
[ 8272.942458] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 | |
[ 8272.942697] sd 4:0:0:0: [sdb] No Caching mode page found | |
[ 8272.942710] sd 4:0:0:0: [sdb] Assuming drive cache: write through | |
[ 8272.946062] sd 4:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). | |
[ 8273.030613] sdb: sdb1 sdb2 | |
[ 8273.031930] sd 4:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16). | |
[ 8273.032621] sd 4:0:0:0: [sdb] Attached SCSI disk | |
[ 8273.538983] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment