Skip to content

Instantly share code, notes, and snippets.

@anddam

anddam/1TB-file.txt

Last active February 16, 2017 08:39
Show Gist options
  • Save anddam/7c3c85385b6f7e2a4569ee7204cdbb45 to your computer and use it in GitHub Desktop.
Save anddam/7c3c85385b6f7e2a4569ee7204cdbb45 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
1TB-file.txt
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-62-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green
Device Model: WDC WD10EADS-11M2B2
Serial Number: WD-WCAV59534464
LU WWN Device Id: 5 0014ee 25985d7d9
Firmware Version: 80.00A80
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Feb 16 08:32:53 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (20100) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 231) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 131 123 021 Pre-fail Always - 6441
4 Start_Stop_Count 0x0032 070 070 000 Old_age Always - 30141
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 053 053 000 Old_age Always - 34711
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 396
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 71
193 Load_Cycle_Count 0x0032 061 061 000 Old_age Always - 419702
194 Temperature_Celsius 0x0022 117 087 000 Old_age Always - 30
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 196 196 000 Old_age Always - 783
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 44
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 48
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 60% 34711 1328
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Raw
4tb-drive.txt
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-62-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Desktop HDD.15
Device Model: ST4000DM000-1F2168
Serial Number: Z3018WRR
LU WWN Device Id: 5 000c50 065b223b1
Firmware Version: CC52
User Capacity: 4.000.787.030.016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5900 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Feb 16 08:18:18 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 592) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 520) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 229949488
3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 088 088 020 Old_age Always - 12590
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 074 060 030 Pre-fail Always - 4320600056
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13693
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 226
183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 096 000 Old_age Always - 333 333 373
189 High_Fly_Writes 0x003a 096 096 000 Old_age Always - 4
190 Airflow_Temperature_Cel 0x0022 067 046 045 Old_age Always - 33 (Min/Max 21/33)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 47
193 Load_Cycle_Count 0x0032 090 090 000 Old_age Always - 21807
194 Temperature_Celsius 0x0022 033 054 000 Old_age Always - 33 (0 14 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 2572h+35m+01.741s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 6946901707
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 4104443642
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 13692 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Raw
dmesg.out
[99296.489446] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[99301.705303] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[99301.909276] usb 2-2: device not accepting address 69, error -62
[99307.113488] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[99312.329488] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[99312.533509] usb 2-2: device not accepting address 70, error -62
[99317.737370] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[99322.953588] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[99323.157365] usb 2-2: device not accepting address 71, error -62
[99323.157387] xhci_hcd 0000:00:14.0: Cannot set link state.
[99323.157407] usb usb2-port2: cannot disable (err = -32)
[99327.145373] usb usb2-port2: Cannot enable. Maybe the USB cable is bad?
[99327.145406] xhci_hcd 0000:00:14.0: Cannot set link state.
[99327.145430] usb usb2-port2: cannot disable (err = -32)
[99327.145494] usb usb2-port2: unable to enumerate USB device
[99327.145512] xhci_hcd 0000:00:14.0: Cannot set link state.
[99327.145533] usb usb2-port2: cannot disable (err = -32)
[99370.169748] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[99375.385460] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[99375.589655] usb 2-2: device not accepting address 73, error -62
[99377.144283] usb 2-2: new SuperSpeed USB device number 74 using xhci_hcd
[99377.170562] usb 2-2: device descriptor read/8, error -71
[99377.273468] usb 2-2: new SuperSpeed USB device number 74 using xhci_hcd
[99382.289497] usb 2-2: device descriptor read/8, error -110
[99382.393467] xhci_hcd 0000:00:14.0: Cannot set link state.
[99382.393506] usb usb2-port2: cannot disable (err = -32)
[99382.561606] usb 2-2: new SuperSpeed USB device number 75 using xhci_hcd
[99382.578310] usb 2-2: New USB device found, idVendor=067b, idProduct=2773
[99382.578323] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[99382.578331] usb 2-2: Product: ATAPI-6 Bridge Controller
[99382.578338] usb 2-2: Manufacturer: Prolific Technology Inc.
[99382.578344] usb 2-2: SerialNumber: 0123456789000000005
[99382.579435] usb 2-2: Set SEL for device-initiated U1 failed.
[99382.579492] usb 2-2: Set SEL for device-initiated U2 failed.
[99382.579739] usb-storage 2-2:1.0: USB Mass Storage device detected
[99382.580784] scsi host20: usb-storage 2-2:1.0
[99383.578326] scsi 20:0:0:0: Direct-Access ST4000DM 000-1F2168 CC52 PQ: 0 ANSI: 0
[99383.579588] sd 20:0:0:0: Attached scsi generic sg1 type 0
[99383.579819] sd 20:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
[99383.580099] sd 20:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[99383.580329] sd 20:0:0:0: [sdb] Write Protect is off
[99383.580339] sd 20:0:0:0: [sdb] Mode Sense: 03 00 00 00
[99383.580562] sd 20:0:0:0: [sdb] No Caching mode page found
[99383.580571] sd 20:0:0:0: [sdb] Assuming drive cache: write through
[99383.584537] sd 20:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
[99383.644792] sdb: sdb1 sdb2 sdb3
[99383.646370] sd 20:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
[99383.647145] sd 20:0:0:0: [sdb] Attached SCSI disk
[99384.343739] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment