vagrantfile

gistfile1.txt

# -*- mode: ruby -*-
# vi: set ft=ruby :

Vagrant::Config.run do |config|
  # All Vagrant configuration is done here. The most common configuration
  # options are documented and commented below. For a complete reference,
  # please see the online documentation at vagrantup.com.

  # Every Vagrant virtual environment requires a box to build off of.
  config.vm.box = "phpdevbox"

  # The url from where the 'config.vm.box' box will be fetched if it
  # doesn't already exist on the user's system.
  config.vm.box_url = "http://files.vagrantup.com/precise64.box"

  # Boot with a GUI so you can see the screen. (Default is headless)
  # config.vm.boot_mode = :gui

  # Assign this VM to a host-only network IP, allowing you to access it
  # via the IP. Host-only networks can talk to the host machine as well as
  # any other machines on the same network, but cannot be accessed (through this
  # network interface) by any external networks.
  # config.vm.network :hostonly, "192.168.33.10"

  # Assign this VM to a bridged network, allowing you to connect directly to a
  # network using the host's network device. This makes the VM appear as another
  # physical device on your network.
  # config.vm.network :bridged

  # Forward a port from the guest to the host, which allows for outside
  # computers to access the VM, whereas host only networking does not.
  config.vm.forward_port 80, 8080

  # Share an additional folder to the guest VM. The first argument is
  # an identifier, the second is the path on the guest to mount the
  # folder, and the third is the path on the host to the actual folder.
  # config.vm.share_folder "v-data", "/vagrant_data", "../data"

  # Enable provisioning with Puppet stand alone.  Puppet manifests
  # are contained in a directory path relative to this Vagrantfile.
  # You will need to create the manifests directory and a manifest in
  # the file phpdevbox.pp in the manifests_path directory.
  #
  # An example Puppet manifest to provision the message of the day:
  #
  # # group { "puppet":
  # #   ensure => "present",
  # # }
  # #
  # # File { owner => 0, group => 0, mode => 0644 }
  # #
  # # file { '/etc/motd':
  # #   content => "Welcome to your Vagrant-built virtual machine!
  # #               Managed by Puppet.\n"
  # # }
  #
  # config.vm.provision :puppet do |puppet|
  #   puppet.manifests_path = "manifests"
  #   puppet.manifest_file  = "phpdevbox.pp"
  # end

  # Enable provisioning with chef solo, specifying a cookbooks path, roles
  # path, and data_bags path (all relative to this Vagrantfile), and adding 
  # some recipes and/or roles.
  #
  # config.vm.provision :chef_solo do |chef|
  #   chef.cookbooks_path = "../my-recipes/cookbooks"
  #   chef.roles_path = "../my-recipes/roles"
  #   chef.data_bags_path = "../my-recipes/data_bags"
     chef.add_recipe "mysql"
     chef.add_role "web"
  #
  #   # You may also specify custom JSON attributes:
     chef.json = { :mysql_password => "123456" }
  # end

  # Enable provisioning with chef server, specifying the chef server URL,
  # and the path to the validation key (relative to this Vagrantfile).
  #
  # The Opscode Platform uses HTTPS. Substitute your organization for
  # ORGNAME in the URL and validation key.
  #
  # If you have your own Chef Server, use the appropriate URL, which may be
  # HTTP instead of HTTPS depending on your configuration. Also change the
  # validation key to validation.pem.
  #
  # config.vm.provision :chef_client do |chef|
  #   chef.chef_server_url = "https://api.opscode.com/organizations/ORGNAME"
  #   chef.validation_key_path = "ORGNAME-validator.pem"
  # end
  #
  # If you're using the Opscode platform, your validator client is
  # ORGNAME-validator, replacing ORGNAME with your organization name.
  #
  # IF you have your own Chef Server, the default validation client name is
  # chef-validator, unless you changed the configuration.
  #
  #   chef.validation_client_name = "ORGNAME-validator"
end

Mota testa este código aqui

-- mode: ruby --

vi: set ft=ruby :

Vagrant::Config.run do |config|

All Vagrant configuration is done here. The most common configuration

options are documented and commented below. For a complete reference,

please see the online documentation at vagrantup.com.

Every Vagrant virtual environment requires a box to build off of.

config.vm.box = "phpdevbox"

The url from where the 'config.vm.box' box will be fetched if it

doesn't already exist on the user's system.

config.vm.box_url = "http://domain.com/path/to/above.box"

Boot with a GUI so you can see the screen. (Default is headless)

config.vm.boot_mode = :gui

Assign this VM to a host-only network IP, allowing you to access it

via the IP. Host-only networks can talk to the host machine as well as

any other machines on the same network, but cannot be accessed (through this

network interface) by any external networks.

config.vm.network :hostonly, "192.168.33.10"

Assign this VM to a bridged network, allowing you to connect directly to a

network using the host's network device. This makes the VM appear as another

physical device on your network.

config.vm.network :bridged

Forward a port from the guest to the host, which allows for outside

computers to access the VM, whereas host only networking does not.

config.vm.forward_port 80, 8080 #apache
config.vm.forward_port 81, 8181 #nginx
config.vm.forward_port 27017, 27017 #mongodb
config.vm.forward_port 3306, 3306 #mysql

Share an additional folder to the guest VM. The first argument is

an identifier, the second is the path on the guest to mount the

folder, and the third is the path on the host to the actual folder.

config.vm.share_folder "v-data", "/vagrant_data", "../data"

Enable provisioning with Puppet stand alone. Puppet manifests

are contained in a directory path relative to this Vagrantfile.

You will need to create the manifests directory and a manifest in

the file precise64.pp in the manifests_path directory.

An example Puppet manifest to provision the message of the day:

# group { "puppet":

# ensure => "present",

# }

# File { owner => 0, group => 0, mode => 0644 }

# file { '/etc/motd':

# content => "Welcome to your Vagrant-built virtual machine!

# Managed by Puppet.\n"

# }

config.vm.provision :puppet do |puppet|
puppet.manifests_path = "puppet/manifests"
puppet.module_path = "puppet/modules"
puppet.options = ['--verbose']
end

Enable provisioning with chef solo, specifying a cookbooks path, roles

path, and data_bags path (all relative to this Vagrantfile), and adding

some recipes and/or roles.

config.vm.provision :chef_solo do |chef|
chef.cookbooks_path = "../my-recipes/cookbooks"
chef.roles_path = "../my-recipes/roles"
chef.data_bags_path = "../my-recipes/data_bags"
chef.add_recipe "mysql"
chef.add_role "web"

  # You may also specify custom JSON attributes:
  chef.json = { :mysql_password => "foo" }
end

Enable provisioning with chef server, specifying the chef server URL,

and the path to the validation key (relative to this Vagrantfile).

The Opscode Platform uses HTTPS. Substitute your organization for

ORGNAME in the URL and validation key.

If you have your own Chef Server, use the appropriate URL, which may be

HTTP instead of HTTPS depending on your configuration. Also change the

validation key to validation.pem.

config.vm.provision :chef_client do |chef|

chef.chef_server_url = "https://api.opscode.com/organizations/ORGNAME"

chef.validation_key_path = "ORGNAME-validator.pem"

end

If you're using the Opscode platform, your validator client is

ORGNAME-validator, replacing ORGNAME with your organization name.

IF you have your own Chef Server, the default validation client name is

chef-validator, unless you changed the configuration.

chef.validation_client_name = "ORGNAME-validator"

allow symlinks in vm

config.vm.customize ["setextradata", :id, "VBoxInternal2/SharedFoldersEnableSymlinksCreate/v-root", "1"]
end