Logitech K780 switch media and function keys on linux

k780.md

Media/function keys on K780

K780 doesn't have a hard switch to lock the function keys. Logitech provides a utility to do this on Windows and iOS but not on Linux. You need to manually remap the keys.

Below works for Arch Linux, other systemd based distros should be about the same.

There's a problem with the F1-F3 keys as they're hardware specific and don't emit an event if pressed on their own and therefore can't be remapped. I might be wrong as I haven't spend any time on researching that.

Edit: about htat, see @tangruize comments below https://gist.github.com/andrejcremoznik/e56234138305226abd41fe4d1d2561a3#gistcomment-3390489

Create file /etc/udev/hwdb.d/95-k780.hwdb

# Logitech K780 map:
# Fn + F4/F5/F6 ==> F4/F5/F6
evdev:input:b0003v046Dp405B*
  KEYBOARD_KEY_c0223=f4
  KEYBOARD_KEY_70065=f5
  KEYBOARD_KEY_c0224=f6

Rebuild hwdb.bin and apply new keys

sudo systemd-hwdb update
sudo udevadm trigger

Make permanent

Make sure the ConditionNeedsUpdate=/etc is commented out in /usr/lib/systemd/system/systemd-hwdb-update.service. If it isn't create an override:

sudo systemctl edit --full systemd-hwdb-update.service

Comment out:
#ConditionNeedsUpdate=/etc

This creates a replacement systemd unit file in /etc/systemd/system/systemd-hwdb-update.service. If some update breaks anything related to this, remove it and recreate with systemctl edit like before.

Read more

• https://wiki.archlinux.org/index.php/Keyboard_input#Identifying_keycodes
• https://wiki.archlinux.org/index.php/Map_scancodes_to_keycodes

bit late to the party, but what worked for me was using the receiver and changing the settings via a windows device with Logitech options. So stupid there isn't a hard key to change.

I just wanted to thank all of you for this excellent and informative thread. I am currently using the simplified script by @tangruize and so far it is working perfectly with my new K780.

If you are using a unifying USB receiver and do not want to install solaar, here is a simplified udev rule that can swap FN keys for K780:

/etc/udev/rules.d/00-k780.rules:

ACTION=="change", SUBSYSTEM=="power_supply", ATTR{model_name}=="K780 Multi-Device Wireless Keyboard", ATTR{online}=="1", RUN+="/bin/bash -c 'printf \"\x11\xff\x0c\x1d\" | cat - /dev/zero | dd of=/dev/$$(ls $$0/device/hidraw) count=20 iflag=count_bytes oflag=nonblock' %S%p"

After editing the above udev file, run sudo udevadm trigger to enable to rule.

Reference: https://github.com/sta-c0000/logitech-keyboard-udev-rules

@tangruize Thanks for this concise solution and all the work that lead to it. Working perfectly for me!

I created an Arch PKGBUILD for it: Roman2K/arch-k780-fnkey

The $SCRIPT_FILE can be simplified:
...

SUBSYSTEM=="hidraw", ACTION=="add", RUN+="$SCRIPT_FILE $name"

I found that it doesn't work sometimes (for bluetooth), and I improved it:

Delete the above rule and script file, and append below contents to /etc/udev/rules.d/00-k780.rules:

ACTION=="bind", KERNEL=="0005:046D:B33B*", SUBSYSTEM=="hid", RUN+="/bin/bash -c 'printf \"\x11\xff\x0c\x1d\" | cat - /dev/zero | dd of=/dev/$$(ls $$0/hidraw) count=20 iflag=count_bytes oflag=nonblock' %S%p"

For what it is worth, my K780 & logitech devices report with slightly different USB addresses:

[ 3247.931263] logitech-djreceiver 0003:046D:C52B.0016: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-10/input2
[ 3248.043856] input: Logitech K780 as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0016/0003:046D:405B.0017/input/input45
[ 3248.144901] logitech-hidpp-device 0003:046D:405B.0017: input,hidraw1: USB HID v1.11 Keyboard [Logitech K780] on usb-0000:00:14.0-10/input2:1
[ 3248.151857] input: Logitech M585/M590 as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C52B.0016/0003:046D:406B.0018/input/input46
[ 3248.238210] logitech-hidpp-device 0003:046D:406B.0018: input,hidraw2: USB HID v1.11 Keyboard [Logitech M585/M590] on usb-0000:00:14.0-10/input2:2

So I modified the udev line from https://gist.github.com/andrejcremoznik/e56234138305226abd41fe4d1d2561a3?permalink_comment_id=4237309#gistcomment-4237309 accordingly:

ACTION=="bind", KERNEL=="0003:046D:405B*", SUBSYSTEM=="hid", RUN+="/bin/bash -c 'printf \"\x11\xff\x0c\x1d\" | cat - /dev/zero | dd of=/dev/$$(ls $$0/hidraw) count=20 iflag=count_bytes oflag=nonblock' %S%p"

But I still have to hit Fn-F2 to get F2 working.

@satmandu Sorry I haven't used K780 in a while. You can try this script: https://gist.github.com/andrejcremoznik/e56234138305226abd41fe4d1d2561a3?permalink_comment_id=3390489#gistcomment-3390489. Since you're using USB receiver, I think Solaar might also help solve your problem if the script doesn't work.