TheUnrealZaka

✨ Welcome to TheUnrealZaka's Guide for Hiding Root Detections!

Using KernelSU-Next + SuSFS

⚠️ Disclaimer: This guide is provided solely for educational purposes. The creator assumes no responsibility for any damage, data loss, or other adverse effects that may occur as a result of following these instructions. Proceed entirely at your own risk!

---

📖 Introduction

Many users who have rooted their devices finds issues where system or third-party applications detect the root status and refuse to operate. This guide outlines a procedure to hide root detection on the majority of Android devices, specifically the ones running Noble ROM for Samsung S9/S9+/N9. The approach detailed here leverages KernelSU-Next in conjunction with SuSFS.

jessarcher

You'll need:

1. Video 4 Linux loopback device kernel module (v4l2loopback) - Source: https://github.com/umlaeute/v4l2loopback (You might find builds in your distro's repos - I'm using Fedora so had to build it myself using https://github.com/danielkza/v4l2loopback-fedora/)
2. gPhoto2 - this is what allows you to access your cameras live feed over USB - this was available in Fedora's repos.
3. GStreamer or ffmpeg - this is what lets you stream the output from gPhoto2 into the loopback device.

It's been a little while since I set it all up so I can't remember all of the installation details, which will probably be different for your distro anyway unless you're using Fedora. Apologies if I have forgotten something as wel.

Running the stream