cpustatus.sh

#!/bin/bash
# cpustatus
#
# Prints the current state of the CPU like temperature, voltage and speed.
# Temperature is reported in degrees Fahrenheit (F) - converting from C requires bc
# CPU speed is calculated in megahertz (MHz).

function convert_to_MHz {
    let value=$1/1000
    echo "$value"
}

function calculate_overvolts {
    # We can safely ignore the integer
    # part of the decimal argument
    # since it's not realistic to run the Pi
    # at voltages higher than 1.99 V
    let overvolts=${1#*.}-20
    echo "$overvolts"
}

# Read the temperature

tm=`/opt/vc/bin/vcgencmd measure_temp`

# Strip out the garbage
tc=`echo $tm| cut -d '=' -f2 | sed 's/..$//'`

# Convert to Fahrenheit
tf=$(echo "scale=2;((9/5) * $tc) + 32" |bc)

volts=$(vcgencmd measure_volts)
volts=${volts:5:4}

if [ $volts != "1.20" ]; then
    overvolts=$(calculate_overvolts $volts)
fi

minFreq=$(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq)
minFreq=$(convert_to_MHz $minFreq)

maxFreq=$(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq)
maxFreq=$(convert_to_MHz $maxFreq)

freq=$(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq)
freq=$(convert_to_MHz $freq)

governor=$(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor)

echo "Temperature:   $tf F"
echo -n "Voltage:       $volts V"
[ $overvolts ] && echo " (+0.$overvolts overvolt)" || echo -e "\r"
echo "Min speed:     $minFreq MHz"
echo "Max speed:     $maxFreq MHz"
echo "Current speed: $freq MHz"
echo "Governor:      $governor"

exit 0