SD Card read >- 1024 characters

code.py

# variation on https://github.com/gmeader/pyportal/blob/master/bug_demo.py

import adafruit_sdcard
import busio
import digitalio
import board
import storage
import os

# Connect to the card and mount the filesystem.
spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
cs = digitalio.DigitalInOut(board.SD_CS)
sdcard = adafruit_sdcard.SDCard(spi, cs)
vfs = storage.VfsFat(sdcard)
storage.mount(vfs, "/sd")

# pre-existing files on CIRCUITPY root
for filename in ('/1023.txt', '/1024.txt', '/1025.txt'):
    sdfilename = ''.join(('/sd', filename))

    print(filename, os.stat(filename)[6], end=' ')
    f = open(filename)
    fdata = f.read()
    print(len(fdata))
    f.close()

    fsd = open(sdfilename, 'w')
    fsd.write(fdata)
    fsd.close()
 
    print(sdfilename, os.stat(sdfilename)[6], end=' ')
    fsd = open(sdfilename)
    fdata = fsd.read()  # 1024 character file: OSError: [Errno 5] Input/output error
    print(len(fdata))
    fsd.close()

Processing many 1023-character files is not a problem. With a 1024-character file, it hangs as above. With a 1025-character file, it doesn't hang but still errors on the SD write close.

Reset button, power cycle make no difference.

I can't account for the difference between the initial observations, and today's. Even reverting to 6.x-mpy-20200810 keeps behavior same as the other tests today.

Some change in the state of the card? Trying new card, newly-formatted with official utility (macOS)...

New card works fine:

code.py output:
/1023.txt 1023 1023
/sd/1023.txt 1023 1023
/1024.txt 1024 1024
/sd/1024.txt 1024 1024
/1025.txt 1025 1025
/sd/1025.txt 1025 1025