RGB Matrix (is31fl3741) Wi-Fi Monitor

code.py

import random
import time
import board
import busio
import wifi
import adafruit_is31fl3741
from adafruit_is31fl3741.adafruit_rgbmatrixqt import Adafruit_RGBMatrixQT

QUEUELEN = 128  # ESP32-S2 (ESP32-S3 can be much longer)

try: # QT Py ESP32-S2 Stemma QT
    i2c = busio.I2C(board.SCL1, board.SDA1, frequency=1000000)
except:
    i2c = busio.I2C(board.SCL, board.SDA, frequency=1000000)
is31 = Adafruit_RGBMatrixQT(i2c, allocate=adafruit_is31fl3741.PREFER_BUFFER)
is31.set_led_scaling(0xFF)
is31.global_current = 0xFF
is31.enable = True

monitor = wifi.Monitor(channel=1, queue=QUEUELEN)
while True:
    received = monitor.packet()
    if received:
        channel = received[wifi.Packet.CH]
        x = channel - 1
        c = round((1 - abs(received[wifi.Packet.RSSI] / 100)) * 0x0000FF)
        subt = (received[wifi.Packet.RAW][0] & 0b11110000) >> 4
        if subt == 8:  # Beacons (blue)
            pass  # Blue
        elif subt == 4:  # Probe Requests (green)
            c = c << 8
        else:  # other management frame subtypes (red)
            c = c << 16
        scaled_rssi = round(7 * (1 - abs(received[wifi.Packet.RSSI] / 100)))
        for _ in range(9, 9 - (2 + scaled_rssi), -1):
            is31.pixel(x, _, c)
        if monitor.queued():
            is31.pixel(x, 1, 0x888844)
        if monitor.lost():
            is31.pixel(x, 0, 0xFF0000)
        is31.show()
        for _ in range(0, 9):
            is31.pixel(x, _, 0x000000)
        is31.show()
    monitor.channel = (monitor.channel + 1) % 14

wifichan2.mov