angp / rpi-netflix.sh

Created August 28, 2016 14:50 — forked from kusti8/rpi-netflix.sh

	echo "USAGE: rpi-netflix.sh workdirectory"
	echo "THIS ASSUMES YOU HAVE CHROMIUM!!!"
	echo "IF NOT, PRESS CTRL+C"
	sleep 5
	wget https://dl.google.com/dl/edgedl/chromeos/recovery/linux_recovery.sh
	echo "YOU MUST HAVE ENOUGH FREE SPACE!!!"
	echo "14\n" \| sudo WORKDIR=$1 ./linux_recovery.sh
	cd $1
	sudo apt-get install kpartx
	sudo kpartx -avs chromeos*.bin

angp / docker-web-app.md

Created January 25, 2016 08:32 — forked from kevingo/docker-web-app.md

Dockerizing a Node.js web app

如果想要在 Docker 在跑 NodeJS 的應用，可以參考 NodeJS 官網上有一篇「Dockerizing a Node.js web app」介紹，還蠻簡單易懂的，這邊稍微紀錄一下相關步驟。

{
  "name": "docker_web_app",
  "version": "1.0.0",

angp / gist:1bc155443e27c7ef031c

Last active August 29, 2015 14:11 — forked from ianbarber/gist:5170508

	package com.example.anothersignintest;

	import java.io.IOException;

	import com.google.android.gms.auth.GoogleAuthException;
	import com.google.android.gms.auth.GoogleAuthUtil;
	import com.google.android.gms.auth.UserRecoverableAuthException;
	import com.google.android.gms.common.Scopes;
	import com.google.android.gms.common.ConnectionResult;
	import com.google.android.gms.common.GooglePlayServicesClient.ConnectionCallbacks;

angp / Digispark_IR_Receiver

Last active August 29, 2015 14:11 — forked from splawski/Digispark_IR_Receiver

	//Origional code from http://www.ediy.com.my/index.php/blog/item/74-digispark-infrared-receiver
	//Modified by Daniel Splawski 02/11/2013

	//Uncomment DigiKeyboard statments for debugging
	//#include <DigiKeyboard.h>

	#include <SoftwareSerial.h>
	SoftwareSerial mySerial(0,1); // RX, TX

	int irPin = 2; //Sensor pin connect to digital pin2 (ATINY85 pin7)

angp / adc_example.c

Created April 20, 2014 17:48 — forked from Wollw/adc_example.c

	/* A simple ADC example that checks the analog reading on ADC0 and turns
	* an LED on if the reading is higher than a threshold value and turns if
	* off if it is under that value. */
	#include <avr/io.h>
	#include <stdint.h>

	/* Which analog pin we want to read from. The pins are labeled "ADC0"
	* "ADC1" etc on the pinout in the data sheet. In this case ADC_PIN
	* being 0 means we want to use ADC0. On the ATmega328P this is also
	* the same as pin PC0 */