Created
November 16, 2012 20:26
-
-
Save antonklava/4090594 to your computer and use it in GitHub Desktop.
.fex and .bin file with gpio enabled for A13-OLinuXino
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [product] | |
| version = "1.0" | |
| machine = "A13-EVB-V1.0" | |
| [target] | |
| boot_clock = 1008 | |
| dcdc2_vol = 1400 | |
| dcdc3_vol = 1200 | |
| ldo2_vol = 3000 | |
| ldo3_vol = 3300 | |
| ldo4_vol = 3300 | |
| pll4_freq = 960 | |
| pll6_freq = 720 | |
| [card_boot] | |
| logical_start = 40960 | |
| sprite_gpio0 = "" | |
| [card_boot0_para] | |
| card_ctrl = 0 | |
| card_high_speed = 1 | |
| card_line = 4 | |
| sdc_d1 = port:PF00<2><1><default><default> | |
| sdc_d0 = port:PF01<2><1><default><default> | |
| sdc_clk = port:PF02<2><1><default><default> | |
| sdc_cmd = port:PF03<2><1><default><default> | |
| sdc_d3 = port:PF04<2><1><default><default> | |
| sdc_d2 = port:PF05<2><1><default><default> | |
| [twi_para] | |
| twi_port = 0 | |
| twi_scl = port:PB00<2><1><default><default> | |
| twi_sda = port:PB01<2><1><default><default> | |
| [uart_para] | |
| uart_debug_port = 1 | |
| uart_debug_tx = port:PG03<4><1><default><default> | |
| uart_debug_rx = port:PG04<4><1><default><default> | |
| [jtag_para] | |
| jtag_enable = 0 | |
| jtag_ms = port:PF00<4><1><default><default> | |
| jtag_ck = port:PF05<4><1><default><default> | |
| jtag_do = port:PF03<4><1><default><default> | |
| jtag_di = port:PF01<4><1><default><default> | |
| [dram_para] | |
| dram_baseaddr = 0x40000000 | |
| dram_clk = 408 | |
| dram_type = 3 | |
| dram_rank_num = 1 | |
| dram_chip_density = 2048 | |
| dram_io_width = 8 | |
| dram_bus_width = 16 | |
| dram_cas = 9 | |
| dram_zq = 0x7b | |
| dram_odt_en = 0 | |
| dram_size = 512 | |
| dram_tpr0 = 0x42d899b7 | |
| dram_tpr1 = 0xa090 | |
| dram_tpr2 = 0x22a00 | |
| dram_tpr3 = 0x0 | |
| dram_tpr4 = 0x0 | |
| dram_tpr5 = 0x0 | |
| dram_emr1 = 0x0 | |
| dram_emr2 = 0x10 | |
| dram_emr3 = 0x0 | |
| [nand_para] | |
| nand_used = 1 | |
| nand_we = port:PC00<2><default><default><default> | |
| nand_ale = port:PC01<2><default><default><default> | |
| nand_cle = port:PC02<2><default><default><default> | |
| nand_ce1 = port:PC03<2><default><default><default> | |
| nand_ce0 = port:PC04<2><default><default><default> | |
| nand_nre = port:PC05<2><default><default><default> | |
| nand_rb0 = port:PC06<2><default><default><default> | |
| nand_rb1 = port:PC07<2><default><default><default> | |
| nand_d0 = port:PC08<2><default><default><default> | |
| nand_d1 = port:PC09<2><default><default><default> | |
| nand_d2 = port:PC10<2><default><default><default> | |
| nand_d3 = port:PC11<2><default><default><default> | |
| nand_d4 = port:PC12<2><default><default><default> | |
| nand_d5 = port:PC13<2><default><default><default> | |
| nand_d6 = port:PC14<2><default><default><default> | |
| nand_d7 = port:PC15<2><default><default><default> | |
| nand_wp = "" | |
| nand_ce2 = "" | |
| nand_ce3 = "" | |
| nand_ce4 = "" | |
| nand_ce5 = "" | |
| nand_ce6 = "" | |
| nand_ce7 = "" | |
| nand_spi = "" | |
| nand_ndqs = port:PC19<2><default><default><default> | |
| [mali_para] | |
| mali_used = 1 | |
| mali_clkdiv = 2 | |
| [twi0_para] | |
| twi0_used = 1 | |
| twi0_scl = port:PB00<2><default><default><default> | |
| twi0_sda = port:PB01<2><default><default><default> | |
| [twi1_para] | |
| twi1_used = 1 | |
| twi1_scl = port:PB15<2><default><default><default> | |
| twi1_sda = port:PB16<2><default><default><default> | |
| [twi2_para] | |
| twi2_used = 1 | |
| twi2_scl = port:PB17<2><default><default><default> | |
| twi2_sda = port:PB18<2><default><default><default> | |
| [uart_para0] | |
| uart_used = 0 | |
| uart_port = 0 | |
| uart_type = 2 | |
| uart_tx = port:PB19<2><1><default><default> | |
| uart_rx = port:PB20<2><1><default><default> | |
| [uart_para1] | |
| uart_used = 1 | |
| uart_port = 1 | |
| uart_type = 2 | |
| uart_tx = port:PG03<4><1><default><default> | |
| uart_rx = port:PG04<4><1><default><default> | |
| [spi1_para] | |
| spi_used = 0 | |
| spi_cs0 = port:PG09<2><default><default><default> | |
| spi_cs1 = port:PG13<2><default><default><default> | |
| spi_sclk = port:PG10<2><default><default><default> | |
| spi_mosi = port:PG11<2><default><default><default> | |
| spi_miso = port:PG12<2><default><default><default> | |
| [spi2_para] | |
| spi_used = 0 | |
| spi_cs0 = port:PE00<4><default><default><default> | |
| spi_sclk = port:PE01<4><default><default><default> | |
| spi_mosi = port:PB02<4><default><default><default> | |
| spi_miso = port:PB03<4><default><default><default> | |
| [rtp_para] | |
| rtp_used = 1 | |
| rtp_screen_size = 5 | |
| rtp_regidity_level = 5 | |
| rtp_press_threshold_enable = 0 | |
| rtp_press_threshold = 0x1f40 | |
| rtp_sensitive_level = 0xf | |
| rtp_exchange_x_y_flag = 0 | |
| [ctp_para] | |
| ctp_used = 0 | |
| ctp_name = "ft5x_ts" | |
| ctp_twi_id = 2 | |
| ctp_twi_addr = 0x70 | |
| ctp_screen_max_x = 800 | |
| ctp_screen_max_y = 480 | |
| ctp_revert_x_flag = 0 | |
| ctp_revert_y_flag = 0 | |
| ctp_exchange_x_y_flag = 0 | |
| ctp_int_port = port:PH21<6><default><default><default> | |
| ctp_wakeup = port:PB13<1><default><default><1> | |
| ctp_io_port = port:PH21<0><default><default><default> | |
| [tkey_para] | |
| tkey_used = 0 | |
| tkey_name = "hv_keypad" | |
| tkey_twi_id = 2 | |
| tkey_twi_addr = 0x62 | |
| tkey_int = "" | |
| [motor_para] | |
| motor_used = 0 | |
| motor_shake = "" | |
| [disp_init] | |
| disp_init_enable = 1 | |
| disp_mode = 0 | |
| screen0_output_type = 1 | |
| screen0_output_mode = 5 | |
| screen1_output_type = 1 | |
| screen1_output_mode = 5 | |
| fb0_framebuffer_num = 2 | |
| fb0_format = 9 | |
| fb0_pixel_sequence = 2 | |
| fb0_scaler_mode_enable = 0 | |
| fb1_framebuffer_num = 2 | |
| fb1_format = 9 | |
| fb1_pixel_sequence = 2 | |
| fb1_scaler_mode_enable = 0 | |
| [lcd0_para] | |
| lcd_used = 1 | |
| lcd_x = 800 | |
| lcd_y = 600 | |
| lcd_dclk_freq = 40 | |
| lcd_pwm_not_used = 0 | |
| lcd_pwm_ch = 0 | |
| lcd_pwm_freq = 10000 | |
| lcd_pwm_pol = 0 | |
| lcd_if = 0 | |
| lcd_hbp = 222 | |
| lcd_ht = 1056 | |
| lcd_vbp = 23 | |
| lcd_vt = 1256 | |
| lcd_hv_if = 0 | |
| lcd_hv_smode = 0 | |
| lcd_hv_s888_if = 0 | |
| lcd_hv_syuv_if = 0 | |
| lcd_hv_vspw = 1 | |
| lcd_hv_hspw = 56 | |
| lcd_lvds_ch = 0 | |
| lcd_lvds_mode = 0 | |
| lcd_lvds_bitwidth = 0 | |
| lcd_lvds_io_cross = 0 | |
| lcd_cpu_if = 0 | |
| lcd_frm = 1 | |
| lcd_io_cfg0 = 268435456 | |
| lcd_gamma_correction_en = 0 | |
| lcd_gamma_tbl_0 = 0x0 | |
| lcd_gamma_tbl_1 = 0x10101 | |
| lcd_gamma_tbl_255 = 0xffffff | |
| lcd_bl_en_used = 1 | |
| lcd_bl_en = port:power1<1><0><default><1> | |
| lcd_power_used = 1 | |
| lcd_power = port:power0<1><0><default><1> | |
| lcd_pwm_used = 1 | |
| lcd_pwm = port:PB02<2><0><default><default> | |
| lcd_gpio_0 = "" | |
| lcd_gpio_1 = "" | |
| lcd_gpio_2 = "" | |
| lcd_gpio_3 = "" | |
| lcdd0 = port:PD00<2><0><default><default> | |
| lcdd1 = port:PD01<2><0><default><default> | |
| lcdd2 = port:PD02<2><0><default><default> | |
| lcdd3 = port:PD03<2><0><default><default> | |
| lcdd4 = port:PD04<2><0><default><default> | |
| lcdd5 = port:PD05<2><0><default><default> | |
| lcdd6 = port:PD06<2><0><default><default> | |
| lcdd7 = port:PD07<2><0><default><default> | |
| lcdd8 = port:PD08<2><0><default><default> | |
| lcdd9 = port:PD09<2><0><default><default> | |
| lcdd10 = port:PD10<2><0><default><default> | |
| lcdd11 = port:PD11<2><0><default><default> | |
| lcdd12 = port:PD12<2><0><default><default> | |
| lcdd13 = port:PD13<2><0><default><default> | |
| lcdd14 = port:PD14<2><0><default><default> | |
| lcdd15 = port:PD15<2><0><default><default> | |
| lcdd16 = port:PD16<2><0><default><default> | |
| lcdd17 = port:PD17<2><0><default><default> | |
| lcdd18 = port:PD18<2><0><default><default> | |
| lcdd19 = port:PD19<2><0><default><default> | |
| lcdd20 = port:PD20<2><0><default><default> | |
| lcdd21 = port:PD21<2><0><default><default> | |
| lcdd22 = port:PD22<2><0><default><default> | |
| lcdd23 = port:PD23<2><0><default><default> | |
| lcdclk = port:PD24<2><0><default><default> | |
| lcdde = port:PD25<2><0><default><default> | |
| lcdhsync = port:PD26<2><0><default><default> | |
| lcdvsync = port:PD27<2><0><default><default> | |
| [tv_out_dac_para] | |
| dac_used = 1 | |
| dac0_src = 0 | |
| [hdmi_para] | |
| hdmi_used = 0 | |
| [csi0_para] | |
| csi_used = 1 | |
| csi_mode = 0 | |
| csi_dev_qty = 1 | |
| csi_stby_mode = 1 | |
| csi_mname = "gc0308" | |
| csi_twi_id = 2 | |
| csi_twi_addr = 0x42 | |
| csi_if = 0 | |
| csi_vflip = 0 | |
| csi_hflip = 1 | |
| csi_iovdd = "" | |
| csi_avdd = "" | |
| csi_dvdd = "" | |
| csi_flash_pol = 1 | |
| csi_mname_b = "" | |
| csi_twi_id_b = 1 | |
| csi_twi_addr_b = 0x78 | |
| csi_if_b = 0 | |
| csi_vflip_b = 1 | |
| csi_hflip_b = 0 | |
| csi_iovdd_b = "" | |
| csi_avdd_b = "" | |
| csi_dvdd_b = "" | |
| csi_flash_pol_b = 1 | |
| csi_pck = port:PE00<3><default><default><default> | |
| csi_ck = port:PE01<3><default><default><default> | |
| csi_hsync = port:PE02<3><default><default><default> | |
| csi_vsync = port:PE03<3><default><default><default> | |
| csi_d0 = port:PE04<3><default><default><default> | |
| csi_d1 = port:PE05<3><default><default><default> | |
| csi_d2 = port:PE06<3><default><default><default> | |
| csi_d3 = port:PE07<3><default><default><default> | |
| csi_d4 = port:PE08<3><default><default><default> | |
| csi_d5 = port:PE09<3><default><default><default> | |
| csi_d6 = port:PE10<3><default><default><default> | |
| csi_d7 = port:PE11<3><default><default><default> | |
| csi_reset = port:power3<1><default><default><0> | |
| csi_power_en = "" | |
| csi_stby = port:PB10<1><default><default><1> | |
| csi_flash = "" | |
| csi_af_en = "" | |
| csi_reset_b = "" | |
| csi_power_en_b = "" | |
| csi_stby_b = "" | |
| csi_flash_b = "" | |
| csi_af_en_b = "" | |
| [csi1_para] | |
| csi_used = 0 | |
| csi_mode = 0 | |
| csi_dev_qty = 1 | |
| csi_stby_mode = 1 | |
| csi_mname = "" | |
| csi_twi_id = 1 | |
| csi_twi_addr = 0xba | |
| csi_if = 0 | |
| csi_vflip = 0 | |
| csi_hflip = 0 | |
| csi_iovdd = "" | |
| csi_avdd = "" | |
| csi_dvdd = "" | |
| csi_flash_pol = 1 | |
| csi_mname_b = "" | |
| csi_twi_id_b = 1 | |
| csi_twi_addr_b = 0x78 | |
| csi_if_b = 0 | |
| csi_vflip_b = 1 | |
| csi_hflip_b = 0 | |
| csi_iovdd_b = "" | |
| csi_avdd_b = "" | |
| csi_dvdd_b = "" | |
| csi_flash_pol_b = 1 | |
| csi_reset = "" | |
| csi_power_en = "" | |
| csi_stby = "" | |
| csi_flash = "" | |
| csi_af_en = "" | |
| csi_reset_b = "" | |
| csi_power_en_b = "" | |
| csi_stby_b = "" | |
| csi_flash_b = "" | |
| csi_af_en_b = "" | |
| [mmc0_para] | |
| sdc_used = 1 | |
| sdc_detmode = 1 | |
| bus_width = 4 | |
| sdc_d1 = port:PF00<2><1><2><default> | |
| sdc_d0 = port:PF01<2><1><2><default> | |
| sdc_clk = port:PF02<2><1><2><default> | |
| sdc_cmd = port:PF03<2><1><2><default> | |
| sdc_d3 = port:PF04<2><1><2><default> | |
| sdc_d2 = port:PF05<2><1><2><default> | |
| sdc_det = port:PG00<0><1><default><default> | |
| sdc_use_wp = 0 | |
| sdc_wp = "" | |
| [mmc1_para] | |
| sdc_used = 0 | |
| sdc_detmode = "" | |
| bus_width = "" | |
| sdc_cmd = "" | |
| sdc_clk = "" | |
| sdc_d0 = "" | |
| sdc_d1 = "" | |
| sdc_d2 = "" | |
| sdc_d3 = "" | |
| sdc_det = "" | |
| sdc_use_wp = "" | |
| sdc_wp = "" | |
| [mmc2_para] | |
| sdc_used = 0 | |
| sdc_detmode = 3 | |
| bus_width = 4 | |
| sdc_cmd = port:PE08<4><1><2><default> | |
| sdc_clk = port:PE09<4><1><2><default> | |
| sdc_d0 = port:PE04<4><1><2><default> | |
| sdc_d1 = port:PE05<4><1><2><default> | |
| sdc_d2 = port:PE06<4><1><2><default> | |
| sdc_d3 = port:PE07<4><1><2><default> | |
| sdc_det = "" | |
| sdc_use_wp = 0 | |
| sdc_wp = "" | |
| [ms_para] | |
| ms_used = 0 | |
| ms_bs = "" | |
| ms_clk = "" | |
| ms_d0 = "" | |
| ms_d1 = "" | |
| ms_d2 = "" | |
| ms_d3 = "" | |
| ms_det = "" | |
| [keypad_para] | |
| kp_used = 0 | |
| kp_in_size = "" | |
| kp_out_size = "" | |
| kp_in0 = "" | |
| kp_in1 = "" | |
| kp_in2 = "" | |
| kp_in3 = "" | |
| kp_in4 = "" | |
| kp_in5 = "" | |
| kp_in6 = "" | |
| kp_in7 = "" | |
| kp_out0 = "" | |
| kp_out1 = "" | |
| kp_out2 = "" | |
| kp_out3 = "" | |
| kp_out4 = "" | |
| kp_out5 = "" | |
| kp_out6 = "" | |
| kp_out7 = "" | |
| [usbc0] | |
| usb_used = 1 | |
| usb_port_type = 2 | |
| usb_detect_type = 1 | |
| usb_id_gpio = port:PG02<0><1><default><default> | |
| usb_det_vbus_gpio = port:PG01<0><0><default><default> | |
| usb_drv_vbus_gpio = port:PG12<1><0><default><0> | |
| usb_host_init_state = 0 | |
| [usbc1] | |
| usb_used = 1 | |
| usb_port_type = 1 | |
| usb_detect_type = 0 | |
| usb_id_gpio = "" | |
| usb_det_vbus_gpio = "" | |
| usb_drv_vbus_gpio = port:PG11<1><0><default><0> | |
| usb_host_init_state = 1 | |
| [usb_feature] | |
| vendor_id = 6353 | |
| mass_storage_id = 1 | |
| adb_id = 2 | |
| manufacturer_name = "USB Developer" | |
| product_name = "Android" | |
| serial_number = "20080411" | |
| [msc_feature] | |
| vendor_name = "USB 2.0" | |
| product_name = "USB Flash Driver" | |
| release = 100 | |
| luns = 3 | |
| [gsensor_para] | |
| gsensor_used = 0 | |
| gsensor_name = "bma222" | |
| gsensor_twi_id = 1 | |
| gsensor_twi_addr = 0x18 | |
| gsensor_int1 = "" | |
| gsensor_int2 = "" | |
| [gps_para] | |
| gps_used = 0 | |
| gps_spi_id = "" | |
| gps_spi_cs_num = "" | |
| gps_lradc = "" | |
| gps_clk = "" | |
| gps_sign = "" | |
| gps_mag = "" | |
| gps_vcc_en = "" | |
| gps_osc_en = "" | |
| gps_rx_en = "" | |
| [sdio_wifi_para] | |
| sdio_wifi_used = 0 | |
| sdio_wifi_sdc_id = "" | |
| sdio_wifi_mod_sel = "" | |
| [usb_wifi_para] | |
| usb_wifi_used = 1 | |
| usb_wifi_usbc_num = 1 | |
| [3g_para] | |
| 3g_used = 0 | |
| 3g_name = "" | |
| 3g_usbc_num = "" | |
| 3g_on_off = "" | |
| 3g_reset = "" | |
| 3g_poweron = "" | |
| 3g_wakeup_out = "" | |
| 3g_wakeup_in = "" | |
| [gy_para] | |
| gy_used = 0 | |
| gy_twi_id = 1 | |
| gy_twi_addr = 0 | |
| gy_int1 = "" | |
| gy_int2 = "" | |
| [ls_para] | |
| ls_used = 1 | |
| ls_name = "ltr501als" | |
| ls_twi_id = 1 | |
| ls_twi_addr = "" | |
| ls_int = "" | |
| [compass_para] | |
| compass_used = 0 | |
| compass_twi_id = "" | |
| compass_twi_addr = "" | |
| compass_int = "" | |
| [bt_para] | |
| bt_used = 0 | |
| bt_uart_id = "" | |
| bt_mod_type = "" | |
| [i2s_para] | |
| i2s_used = 0 | |
| i2s_channel = "" | |
| i2s_mclk = "" | |
| i2s_bclk = "" | |
| i2s_lrclk = "" | |
| i2s_dout0 = "" | |
| i2s_dout1 = "" | |
| i2s_dout2 = "" | |
| i2s_dout3 = "" | |
| i2s_din = "" | |
| [spdif_para] | |
| spdif_used = 0 | |
| spdif_mclk = "" | |
| spdif_dout = "" | |
| spdif_din = "" | |
| [audio_para] | |
| audio_used = 1 | |
| audio_pa_ctrl = port:PG10<1><default><default><0> | |
| [ir_para] | |
| ir_used = 0 | |
| ir0_rx = port:PB04<2><default><default><default> | |
| [rtc_para] | |
| rtc_used = 1 | |
| rtc_name = "pcf8563" | |
| rtc_twi_id = 1 | |
| rtc_twi_addr = 81 | |
| [pmu_para] | |
| pmu_used = 1 | |
| pmu_twi_addr = 52 | |
| pmu_twi_id = 0 | |
| pmu_irq_id = 0 | |
| pmu_battery_rdc = 200 | |
| pmu_battery_cap = 2600 | |
| pmu_init_chgcur = 300 | |
| pmu_earlysuspend_chgcur = 600 | |
| pmu_suspend_chgcur = 1000 | |
| pmu_resume_chgcur = 300 | |
| pmu_shutdown_chgcur = 1000 | |
| pmu_init_chgvol = 4200 | |
| pmu_init_chgend_rate = 15 | |
| pmu_init_chg_enabled = 1 | |
| pmu_init_adc_freq = 100 | |
| pmu_init_adc_freqc = 100 | |
| pmu_init_chg_pretime = 50 | |
| pmu_init_chg_csttime = 720 | |
| pmu_bat_para1 = 0 | |
| pmu_bat_para2 = 0 | |
| pmu_bat_para3 = 1 | |
| pmu_bat_para4 = 5 | |
| pmu_bat_para5 = 7 | |
| pmu_bat_para6 = 13 | |
| pmu_bat_para7 = 16 | |
| pmu_bat_para8 = 26 | |
| pmu_bat_para9 = 36 | |
| pmu_bat_para10 = 46 | |
| pmu_bat_para11 = 53 | |
| pmu_bat_para12 = 61 | |
| pmu_bat_para13 = 73 | |
| pmu_bat_para14 = 84 | |
| pmu_bat_para15 = 92 | |
| pmu_bat_para16 = 100 | |
| pmu_usbvol = 4000 | |
| pmu_usbcur = 0 | |
| pmu_usbvol_pc = 4000 | |
| pmu_usbcur_pc = 0 | |
| pmu_pwroff_vol = 3300 | |
| pmu_pwron_vol = 2900 | |
| pmu_pekoff_time = 6000 | |
| pmu_pekoff_en = 1 | |
| pmu_peklong_time = 1500 | |
| pmu_pekon_time = 1000 | |
| pmu_pwrok_time = 64 | |
| pmu_pwrnoe_time = 2000 | |
| pmu_intotp_en = 1 | |
| pmu_used2 = 0 | |
| pmu_adpdet = "" | |
| pmu_init_chgcur2 = 400 | |
| pmu_earlysuspend_chgcur2 = 600 | |
| pmu_suspend_chgcur2 = 1200 | |
| pmu_resume_chgcur2 = 400 | |
| pmu_shutdown_chgcur2 = 1200 | |
| pmu_suspendpwroff_vol = 3500 | |
| pmu_batdeten = 1 | |
| [recovery_key] | |
| key_min = 4 | |
| key_max = 6 | |
| [gpio_para] | |
| gpio_used = 1 | |
| gpio_num = 5 | |
| gpio_pin_1 = port:PB02<1><0><default><default> | |
| gpio_pin_2 = port:PB03<1><0><default><default> | |
| gpio_pin_3 = port:PB04<1><0><default><default> | |
| gpio_pin_4 = port:PB05<1><0><default><default> | |
| gpio_pin_5 = port:PG09<1><1><default><default> |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment