dmesg for rumprun/nginx unikernel booting on bare metal from USB stick

gistfile1.txt

rumpctrl (tcp://192.168.2.106:12345)$ sysctl -r kern.msgbuf                    
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.17 (RUMP-ROAST)
total memory = 1004 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpu0 at thinair0: rump virtual cpu
root file system type: rumpfs
kern.module.path=/stand/i386/7.99.17/modules
mainbus0 (root)
pci0 at mainbus0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 8086 product 2a00 (host bridge, revision 0x0c) at pci0 dev 0 function 0 not configured
vendor 8086 product 2a01 (PCI bridge, revision 0x0c) at pci0 dev 1 function 0 not configured
wm0 at pci0 dev 25 function 0: Intel i82801H (M_AMT) LAN Controller (rev. 0x03)
wm0: interrupting at pausebreak
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address xx:xx:xx:xx:xx:xx
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 8086 product 2834 (rev. 0x03)
uhci0: interrupting at pausebreak
usb0 at uhci0: USB revision 1.0
uhub0 at usb0: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 26 function 1: vendor 8086 product 2835 (rev. 0x03)
uhci1: interrupting at pausebreak
usb1 at uhci1: USB revision 1.0
uhub1 at usb1: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 26 function 7: vendor 8086 product 283a (rev. 0x03)
ehci0: interrupting at pausebreak
ehci0: BIOS refuses to give up ownership, using force
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
vendor 8086 product 284b (mixed mode multimedia, revision 0x03) at pci0 dev 27 function 0 not configured
vendor 8086 product 283f (PCI bridge, revision 0x03) at pci0 dev 28 function 0 not configured
vendor 8086 product 2841 (PCI bridge, revision 0x03) at pci0 dev 28 function 1 not configured
vendor 8086 product 2843 (PCI bridge, revision 0x03) at pci0 dev 28 function 2 not configured
vendor 8086 product 2845 (PCI bridge, revision 0x03) at pci0 dev 28 function 3 not configured
vendor 8086 product 2847 (PCI bridge, revision 0x03) at pci0 dev 28 function 4 not configured
uhci2 at pci0 dev 29 function 0: vendor 8086 product 2830 (rev. 0x03)
uhci2: interrupting at pausebreak
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 1: vendor 8086 product 2831 (rev. 0x03)
uhci3: interrupting at pausebreak
usb4 at uhci3: USB revision 1.0
uhub4 at usb4: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4 at pci0 dev 29 function 2: vendor 8086 product 2832 (rev. 0x03)
uhci4: interrupting at pausebreak
usb5 at uhci4: USB revision 1.0
uhub5 at usb5: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ehci0: handing over full speed device on port 2 to uhci0
ehci1 at pci0 dev 29 function 7: vendor 8086 product 2836 (rev. 0x03)
ehci1: interrupting at pausebreak
ehci1: BIOS refuses to give up ownership, using force
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
uhub6 at usb6: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
vendor 8086 product 2448 (PCI bridge, subtractive decode, revision 0xf3) at pci0 dev 30 function 0 not configured
vendor 8086 product 2811 (ISA bridge, revision 0x03) at pci0 dev 31 function 0 not configured
vendor 8086 product 2850 (IDE mass storage, interface 0x8a, revision 0x03) at pci0 dev 31 function 1 not configured
vendor 8086 product 2829 (SATA mass storage, AHCI 1.0, revision 0x03) at pci0 dev 31 function 2 not configured
vendor 8086 product 283e (SMBus serial bus, revision 0x03) at pci0 dev 31 function 3 not configured
umass0 at uhub2 port 3 configuration 1 interface 0
umass0: Kingston DataTraveler 2.0, rev 2.00/2.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Kingston, DataTraveler 2.0, 1.00> disk removable
STMicroelectronics Biometric Coprocessor, class 0/0, rev 1.00/0.01, addr 2, uhub0 port 2 not configured
sd0: 974 MB, 3936 cyl, 16 head, 32 sec, 512 bytes/sect x 1994752 sectors
dhcp: wm0: adding IP address 192.168.2.106/24
dhcp: wm0: adding route to 192.168.2.0/24
dhcp: wm0: adding default route via 192.168.2.1
lease time: infinite
rumpctrl (tcp://192.168.2.106:12345)$