Skip to content

Instantly share code, notes, and snippets.

@aorjoa

aorjoa/sample_qfs_tool.cfg

Last active December 19, 2015 18:33
Show Gist options
  • Save aorjoa/4b8fe46b2e6afce4562e to your computer and use it in GitHub Desktop.
Save aorjoa/4b8fe46b2e6afce4562e to your computer and use it in GitHub Desktop.
Download ZIP
QFS script for aiyara
Raw
gistfile1.txt
#### Config network interface with static IP address)
vi /etc/network/interfaces
auto eth4
iface eth4 inet static
address 192.168.5.201
netmask 255.255.255.0
gateway 192.168.5.9
Raw
sample_qfs_tool.cfg
fs.default = qfs://192.168.5.201:20000
#fs.msgLogWriter.logLevel=ERROR
# fs.trash.minPathDepth = 5
# fs.trash.current = Current
# fs.trash.homesPrefix = /user
# fs.trash.interval = 60
# fs.trash.trash = .Trash
# dfs.force.remove = true
#fs.euser = 3008
#fs.egroup = 505
Raw
sample_setup_chunkserver.cfg
[metaserver]
hostname = 192.168.5.201
rundir = /media/data_ssd/meta
clientport = 20000
chunkport = 20100
clusterkey = Aiyara
[chunkserver]
hostname = localhost
rundir = /media/data_ssd
chunkport = 21001
# in practice, have a chunkdir per disk.
chunkdirs = /media/data_ssd/chunkdir1 /media/data_ssd/chunkdir2
[certs]
rundir = /media/data_ssd/certs
[client]
rundir = /media/data_ssd/client
Raw
sample_setup_chunkserver.py
#!/usr/bin/env python
#
# $Id$
#
# Author: Thilee Subramaniam
#
# Copyright 2012 Quantcast Corp.
#
# This file is part of Kosmos File System (KFS).
#
# Licensed under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied. See the License for the specific language governing
# permissions and limitations under the License.
#
############# This script was edit fot SUT Aiyara Cluster #############
"""
This script helps to set up a simple, local deployment of QFS.
You can write your own config file (start from ./sample_setup.cfg)
and run this script to install, uninstall or upgrade.
./sample_setup.py -c sample_setup_chunkserver.cfg -a install
-c: config file
-a: action (one of install, start, stop, uninstall)
-b: distribution directory
-s: source directory
The script sets up config files as follows.
chunk-run-dir/chunkserver/chunks/
/conf/ChunkServer.prp
/chunkserver.log
/chunkserver.out
"""
import sys, os, os.path, shutil, errno, signal, posix, re, socket
import ConfigParser
import subprocess
import getpass
from optparse import OptionParser, OptionGroup, IndentedHelpFormatter
class Globals():
CHUNKSERVER = 'chunkserver'
QFSTOOL = None
MKCERTS = None
def get_size_in_bytes(str):
if not str:
return 0
pos = 0
while pos < len(str) and not str[pos].isalpha():
pos = pos + 1
if pos >= len(str):
return int(str)
val = int(str[0:pos])
unit = str[pos]
mul = 1
if unit in ('k', 'K'):
mul = 1000
elif unit in ('m', 'M'):
mul = 1000000
elif unit in ('g', 'G'):
mul = 1000000000
return val * mul
def shell_quote(s):
return "'" + s.replace("'", "'\\''") + "'"
def check_binaries(releaseDir, sourceDir, authFlag):
if not os.path.isfile(releaseDir + '/bin/chunkserver'):
sys.exit('Chunkserver missing in build directory')
Globals.CHUNKSERVER = releaseDir + '/bin/chunkserver'
if os.path.isfile(releaseDir + '/bin/tools/qfs'):
Globals.QFSTOOL = releaseDir + '/bin/tools/qfs'
if authFlag:
mkcerts = sourceDir + '/src/test-scripts/qfsmkcerts.sh'
if os.path.isfile(mkcerts):
Globals.MKCERTS = mkcerts
else:
sys.exit('qfsmkcerts.sh missing in source directories')
print 'Binaries presence checking - OK.'
def check_port(port):
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
try:
s.bind(('localhost', port))
del s
except socket.error, err:
sys.exit('aborting, port %d already in use (%s)' % (port, str(err)))
def check_ports(config):
portsToCheck = []
portsToCheck.append(config.getint('metaserver', 'clientport'))
portsToCheck.append(config.getint('metaserver', 'chunkport'))
for section in config.sections():
if section.startswith('chunkserver'):
portsToCheck.append(config.getint(section, 'chunkport'))
for p in portsToCheck:
check_port(p)
def kill_running_program_pid(binaryPath, runDir):
if binaryPath == Globals.CHUNKSERVER:
name = 'chunkserver'
else:
name = ''
if 0 < len(name) and 0 < len(runDir):
try:
pidf = '%s/%s.pid' % (runDir, name)
f = open(pidf, 'r')
line = f.readline()
f.close()
os.unlink(pidf)
pid = int(line.strip())
os.kill(pid, signal.SIGTERM)
except:
pass
else:
kill_running_program(binaryPath)
def kill_running_program(binaryPath):
if sys.platform in ('darwin', 'Darwin'):
checkPath = os.path.split(binaryPath)[1]
if not checkPath:
return
cmd = ('ps -ef | grep %s | grep %s | grep -v grep | awk \'{print $2}\''
% (os.getlogin(), checkPath))
res = subprocess.Popen(cmd, shell=True,
stdout=subprocess.PIPE).communicate()
pids = res[0].split('\n')
for pid in pids:
if pid.strip() != '':
os.kill(int(pid.strip()), signal.SIGTERM)
else:
if binaryPath.find('qfsstatus') >= 0:
cmd = ('ps -ef | grep %s | grep /qfsbase/ | grep %s | grep -v grep | awk \'{print $2}\''
% (os.getlogin(), binaryPath))
res = subprocess.Popen(cmd, shell=True,
stdout=subprocess.PIPE).communicate()
pids = res[0].split('\n')
for pid in pids:
if pid.strip() != '':
os.kill(int(pid.strip()), signal.SIGTERM)
return
pids = subprocess.Popen(['pidof', binaryPath],
stdout=subprocess.PIPE).communicate()
for pid in pids[0].strip().split():
os.kill(int(pid), signal.SIGTERM)
def run_command(cmd):
return subprocess.check_call(cmd, shell=True)
def rm_tree(path):
if '/data_ssd/' in path:
shutil.rmtree(path)
else:
print >> sys.stderr, 'refusing to remove path %r' % path,
print >> sys.stderr, 'because it does not contain /data_ssd/'
def duplicate_tree(src, dst):
"""Copy files & directories from SRC directory to DST directory.
If DST does not exist, create it. If DST's children with same SRC
children names exist then overwrite them.
"""
if os.path.exists(dst) and not os.path.isdir(dst):
sys.exit('Cannot duplicate directory to a non-directory')
if not os.path.exists(dst):
os.makedirs(dst)
for li in os.listdir(src):
srcPath = os.path.join(src, li)
dstPath = os.path.join(dst, li)
if os.path.isdir(dstPath):
rm_tree(dstPath)
else:
if os.path.exists(dstPath):
os.unlink(dstPath)
if os.path.isdir(srcPath):
shutil.copytree(srcPath, dstPath)
else:
shutil.copyfile(srcPath, dstPath)
def mkdir_p(dirname):
try:
os.makedirs(dirname)
except OSError, err:
if err.errno != errno.EEXIST:
sys.exit('Failed to create directory')
else:
if not os.path.isdir(dirname):
sys.exit('% exists, but is not a directory!' % dirname)
def parse_command_line():
action_keys = { 'install' : True,
'start' : True,
'stop' : True,
'uninstall' : True }
argv0Dir = os.path.dirname(sys.argv[0])
defaultConfig = os.path.join(argv0Dir, 'sample_setup_chunkserver.cfg')
defaultConfig = os.path.abspath(defaultConfig)
defaultSrcDir = os.path.join(argv0Dir, '../..')
defaultSrcDir = os.path.abspath(defaultSrcDir)
defaultRelDir = os.path.join(argv0Dir, '../../build/release')
defaultRelDir = os.path.abspath(defaultRelDir)
if not os.path.exists(defaultRelDir):
defaultRelDir = os.path.join(argv0Dir, '../..')
defaultRelDir = os.path.abspath(defaultRelDir)
formatter = IndentedHelpFormatter(max_help_position=50, width=120)
usage = "usage: ./%prog [options] -a <ACTION>"
parser = OptionParser(usage, formatter=formatter, add_help_option=False)
parser.add_option('-c', '--config-file', action='store',
default=defaultConfig, metavar='FILE', help='Setup config file.')
parser.add_option('-a', '--action', action='store', default=None,
metavar='ACTION', help='One of install, uninstall, or stop.')
parser.add_option('-r', '--release-dir', action='store',
default=defaultRelDir, metavar='DIR', help='QFS release directory.')
parser.add_option('-s', '--source-dir', action='store',
default=defaultSrcDir, metavar='DIR', help='QFS source directory.')
parser.add_option('-u', '--auth', action='store_true',
help="Configure QFS authentication.")
parser.add_option('-h', '--help', action='store_true',
help="Print this help message and exit.")
actions = """
Actions:
install = setup meta and chunk server directories, restarting/starting them
start = start meta and chunk servers
stop = stop meta and chunk servers
uninstall = remove meta and chunk server directories after stopping them"""
sampleSession = """
Hello World example of a client session:
# Install sample server setup, only needed once.
%s/examples/sampleservers/sample_setup_chunkserver.py -a install
PATH="%s:${PATH}"
# Make temp directory.
qfsshell -s localhost -p 20000 -q -- mkdir /qfs/tmp
# Create file containing Hello World, Reed-Solomon encoded, replication 1.
echo 'Hello World' \
| cptoqfs -s localhost -p 20000 -S -r 1 -k /qfs/tmp/helloworld -d -
# Cat file content.
qfscat -s localhost -p 20000 /qfs/tmp/helloworld
# Stat file to see encoding (RS or not), replication level, mtime.
qfsshell -s localhost -p 20000 -q -- stat /qfs/tmp/helloworld
# Copy file locally to current directory.
cpfromqfs -s localhost -p 20000 -k /qfs/tmp/helloworld -d ./helloworld
# Remove file from QFS.
qfsshell -s localhost -p 20000 -q -- rm /qfs/tmp/helloworld
# Stop the server and remove the custom install.
%s/examples/sampleservers/sample_setup_chunkserver.py -a stop
%s/examples/sampleservers/sample_setup_chunkserver.py -a uninstall
Use qfs to manipulate files the same way you would use 'hadoop fs':
# Set qfs command alias.
alias qfs='%s/bin/tools/qfs -cfg ~/qfsbase/client/clidefault.prp'
qfs -h
qfs -stat /
qfs -mkdir /some-dir
qfs -ls /
Did you notice how fast it is? :)
Run the following to test with hadoop:
%s/src/test-scripts/qfshadoop.sh
"""
# An install sets up all config files and (re)starts the servers.
# An uninstall stops the servers and removes the config files.
# A stop stops the servers.
opts, args = parser.parse_args()
sampleSession = sampleSession % (
opts.source_dir,
opts.release_dir,
opts.source_dir,
opts.source_dir,
opts.release_dir,
opts.source_dir
)
if opts.help:
parser.print_help()
print actions
print sampleSession
print
posix._exit(0)
e = []
if not os.path.isfile(opts.config_file):
e.append("specified 'config-file' does not exist: %s"
% opts.config_file)
if not opts.action:
e.append("'action' must be specified")
elif not action_keys.has_key(opts.action):
e.append("invalid 'action' specified: %s" % opts.action)
if not os.path.isdir(opts.release_dir):
e.append("specified 'release-dir' does not exist: %s"
% opts.release_dir)
if not os.path.isdir(opts.source_dir):
e.append("specified 'source-dir' does not exist: %s" % opts.source_dir)
if len(e) > 0:
parser.print_help()
print actions
print sampleSession
print
for error in e:
print "*** %s" % error
print
posix._exit(1)
return opts
def do_cleanup(config, doUninstall):
for section in config.sections():
if section.startswith('chunkserver'):
chunkRunDir = config.get(section, 'rundir')
if chunkRunDir:
kill_running_program_pid(Globals.CHUNKSERVER, chunkRunDir)
if doUninstall and os.path.isdir(chunkRunDir):
rm_tree(chunkRunDir)
if config.has_section('certs'):
certsDir = config.get('certs', 'rundir')
if doUninstall and os.path.isdir(certsDir):
rm_tree(certsDir)
if config.has_section('client'):
clientDir = config.get('client', 'rundir')
if doUninstall and os.path.isdir(clientDir):
rm_tree(clientDir)
if doUninstall:
qfsbase = os.path.expanduser('/media/data_ssd')
if os.path.isdir(qfsbase) and not os.path.islink(qfsbase):
os.rmdir(qfsbase)
print 'Uninstall - OK.'
else:
print 'Stop servers - OK.'
def setup_directories(config, authFlag):
for section in config.sections():
if section.startswith('chunkserver'):
chunkRunDir = config.get(section, 'rundir')
chunkDirs = config.get(section, 'chunkdirs')
chunkDirsList = chunkDirs.split(' ')
if chunkRunDir:
mkdir_p(chunkRunDir);
mkdir_p(chunkRunDir + '/conf')
if len(chunkDirsList) > 0:
for cd in chunkDirsList:
mkdir_p(cd)
else:
mkdir_p(chunkRunDir + '/chunkdir')
if config.has_section('client'):
clientDir = config.get('client', 'rundir')
if clientDir:
mkdir_p(clientDir)
print 'Setup directories - OK.'
def setup_config_files(config, authFlag):
if config.has_section('client'):
clientDir = config.get('client', 'rundir')
else:
clientDir = None
if authFlag:
if 'certs' not in config.sections():
sys.exit('Required metaserver certs not found in config')
certsDir = config.get('certs', 'rundir')
if not certsDir:
sys.exit('Required certs certsdir not found in config')
defaultUser = getpass.getuser()
if run_command('%s %s meta root %s' % (
shell_quote(Globals.MKCERTS),
shell_quote(certsDir),
shell_quote(defaultUser))) != 0:
sys.exit('Create X509 certs failure')
if clientDir:
clientFile = open(clientDir + '/client.prp', 'w')
print >> clientFile, 'client.auth.X509.X509PemFile = %s/%s.crt' % (certsDir, defaultUser)
print >> clientFile, 'client.auth.X509.PKeyPemFile = %s/%s.key' % (certsDir, defaultUser)
print >> clientFile, 'client.auth.X509.CAFile = %s/qfs_ca/cacert.pem' % certsDir
clientFile.close()
if clientDir:
defaultConfig = clientDir + '/clidefault.prp'
clientFile = open(defaultConfig, 'w')
print >> clientFile, 'fs.default = qfs://192.168.5.201:20000'
if authFlag:
print >> clientFile, 'client.auth.X509.X509PemFile = %s/%s.crt' % (certsDir, defaultUser)
print >> clientFile, 'client.auth.X509.PKeyPemFile = %s/%s.key' % (certsDir, defaultUser)
print >> clientFile, 'client.auth.X509.CAFile = %s/qfs_ca/cacert.pem' % certsDir
clientFile.close()
metaserverHostname = config.get('metaserver', 'hostname')
metaserverClientPort = config.getint('metaserver', 'clientport')
metaserverChunkPort = config.getint('metaserver', 'chunkport')
clusterKey = config.get('metaserver', 'clusterkey')
# Chunkservers.
for section in config.sections():
if section.startswith('chunkserver'):
chunkClientPort = config.getint(section, 'chunkport')
chunkDirs = config.get(section, 'chunkdirs')
chunkRunDir = config.get(section, 'rundir')
if chunkRunDir:
if authFlag:
if run_command('%s %s chunk%d' % (
shell_quote(Globals.MKCERTS),
shell_quote(certsDir),
chunkClientPort)) != 0:
sys.exit('Create X509 failure')
chunkFile = open(chunkRunDir + '/conf/ChunkServer.prp', 'w')
print >> chunkFile, 'chunkServer.metaServer.hostname = %s' % metaserverHostname
print >> chunkFile, 'chunkServer.metaServer.port = %d' % metaserverChunkPort
print >> chunkFile, 'chunkServer.clientPort = %d' % chunkClientPort
print >> chunkFile, 'chunkServer.clusterKey = %s' % clusterKey
print >> chunkFile, 'chunkServer.rackId = 0'
print >> chunkFile, 'chunkServer.chunkDir = %s' % chunkDirs
print >> chunkFile, 'chunkServer.diskIo.crashOnError = 1'
print >> chunkFile, 'chunkServer.abortOnChecksumMismatchFlag = 1'
print >> chunkFile, 'chunkServer.msgLogWriter.logLevel = DEBUG'
print >> chunkFile, 'chunkServer.msgLogWriter.maxLogFileSize = 1e6'
print >> chunkFile, 'chunkServer.msgLogWriter.maxLogFiles = 2'
print >> chunkFile, 'chunkServer.pidFile = %s/chunkserver.pid' % chunkRunDir
print >> chunkFile, 'chunkServer.clientThreadCount = 3'
if authFlag:
print >> chunkFile, 'chunkserver.meta.auth.X509.X509PemFile = %s/chunk%d.crt' % (certsDir, chunkClientPort)
print >> chunkFile, 'chunkserver.meta.auth.X509.PKeyPemFile = %s/chunk%d.key' % (certsDir, chunkClientPort)
print >> chunkFile, 'chunkserver.meta.auth.X509.CAFile = %s/qfs_ca/cacert.pem' % certsDir
chunkFile.close()
print 'Setup config files - OK.'
def start_servers(config, whichServers, createNewFsFlag, authFlag):
startMeta = whichServers in ('meta', 'all')
startChunk = whichServers in ('chunk', 'all')
startWeb = whichServers in ('web', 'all')
errors = 0
if startChunk:
for section in config.sections():
if section.startswith('chunkserver'):
chunkRunDir = config.get(section, 'rundir')
kill_running_program_pid(chunkRunDir, chunkRunDir)
if chunkRunDir:
chunkConf = chunkRunDir + '/conf/ChunkServer.prp'
chunkLog = chunkRunDir + '/ChunkServer.log'
chunkOut = chunkRunDir + '/ChunkServer.out'
command = '%s %s %s > %s 2>&1 &' % (
shell_quote(Globals.CHUNKSERVER),
shell_quote(chunkConf),
shell_quote(chunkLog),
shell_quote(chunkOut))
if run_command(command) > 0:
print '*** chunkserver failed to start'
errors = errors + 1
if errors > 0:
print 'Started servers - FAILED.'
else:
print 'Started servers - OK.'
defaultConfig=None
if config.has_section('client'):
clientDir = config.get('client', 'rundir')
if authFlag and os.path.isfile(clientDir + '/client.prp'):
print 'QFS authentication required.'
defaultConfig = clientDir + '/clidefault.prp'
if os.path.isfile(defaultConfig):
print 'Default QFS client configuration file: %s' % defaultConfig
if createNewFsFlag and Globals.QFSTOOL:
if defaultConfig:
cfgOpt = " -cfg %s" % shell_quote(defaultConfig)
command = '%s%s -mkdir %s' % (
shell_quote(Globals.QFSTOOL),
cfgOpt,
shell_quote('/user/' + getpass.getuser()),
)
print 'Creating default user directory by executing:\n%s' % command
if run_command(command) != 0:
print '*** failed to created user directory'
else:
print '- OK.'
# Need to massage the ~ in the config file paths. Otherwise a directory
# with name "~" would get created at $CWD.
def parse_config(configFile):
config = ConfigParser.ConfigParser()
config.read(configFile);
for section in config.sections():
dir = config.get(section, 'rundir')
config.set(section, 'rundir', os.path.expanduser(dir))
if section.startswith('chunkserver'):
dir = config.get(section, 'chunkdirs')
dirstowrite = []
dirs = dir.split(' ')
for d in dirs:
dirstowrite.append(os.path.expanduser(d))
config.set(section, 'chunkdirs', ' '.join(dirstowrite))
return config
if __name__ == '__main__':
opts = parse_command_line()
config = parse_config(opts.config_file)
if opts.action in ('uninstall', 'stop'):
do_cleanup(config, opts.action == 'uninstall')
posix._exit(0)
check_binaries(opts.release_dir, opts.source_dir, opts.auth)
check_ports(config)
if opts.action == 'install':
setup_directories(config, opts.auth)
setup_config_files(config, opts.auth)
start_servers(config, 'all', opts.action == 'install', opts.auth)
Raw
sample_setup_metaserver.cfg
[metaserver]
hostname = 192.168.5.201
rundir = /media/data_ssd/meta
clientport = 20000
chunkport = 20100
clusterkey = Aiyara
[webui]
hostname = 192.168.5.201
rundir = /media/data_ssd/web
webport = 22000
[certs]
rundir = /media/data_ssd/certs
[client]
rundir = /media/data_ssd/client
Raw
sample_setup_metaserver.py
#!/usr/bin/env python
#
# $Id$
#
# Author: Thilee Subramaniam
#
# Copyright 2012 Quantcast Corp.
#
# This file is part of Kosmos File System (KFS).
#
# Licensed under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied. See the License for the specific language governing
# permissions and limitations under the License.
#
############# This script was edit fot SUT Aiyara Cluster #############
"""
This script helps to set up a simple, local deployment of QFS.
You can write your own config file (start from ./sample_setup.cfg)
and run this script to install, uninstall or upgrade.
./sample_setup.py -c sample_setup_metaserver.cfg -a install
-c: config file
-a: action (one of install, start, stop, uninstall)
-b: distribution directory
-s: source directory
The script sets up the servers' config files as follows.
(By default it installs all this in ~/qfsbase, set in the config file.)
meta-run-dir/checkpoints/
/logs/
/conf/MetaServer.prp
/metaserver.log
/metaserver.out
webui-run-dir/docroot/
/conf/WebUI.cfg
/webui.log
"""
import sys, os, os.path, shutil, errno, signal, posix, re, socket
import ConfigParser
import subprocess
import getpass
from optparse import OptionParser, OptionGroup, IndentedHelpFormatter
class Globals():
METASERVER = 'metaserver'
WEBSERVER = 'qfsstatus.py'
QFSTOOL = None
MKCERTS = None
def get_size_in_bytes(str):
if not str:
return 0
pos = 0
while pos < len(str) and not str[pos].isalpha():
pos = pos + 1
if pos >= len(str):
return int(str)
val = int(str[0:pos])
unit = str[pos]
mul = 1
if unit in ('k', 'K'):
mul = 1000
elif unit in ('m', 'M'):
mul = 1000000
elif unit in ('g', 'G'):
mul = 1000000000
return val * mul
def shell_quote(s):
return "'" + s.replace("'", "'\\''") + "'"
def check_binaries(releaseDir, sourceDir, authFlag):
if not os.path.isfile(releaseDir + '/bin/metaserver'):
sys.exit('Metaserver missing in build directory')
Globals.METASERVER = releaseDir + '/bin/metaserver'
if os.path.isfile(releaseDir + '/bin/tools/qfs'):
Globals.QFSTOOL = releaseDir + '/bin/tools/qfs'
if os.path.isfile(releaseDir + '/webui/qfsstatus.py'):
Globals.WEBSERVER = releaseDir + '/webui/qfsstatus.py'
elif os.path.isfile(sourceDir + '/webui/qfsstatus.py'):
Globals.WEBSERVER = sourceDir + '/webui/qfsstatus.py'
else:
sys.exit('Webserver missing in build and source directories')
if authFlag:
mkcerts = sourceDir + '/src/test-scripts/qfsmkcerts.sh'
if os.path.isfile(mkcerts):
Globals.MKCERTS = mkcerts
else:
sys.exit('qfsmkcerts.sh missing in source directories')
print 'Binaries presence checking - OK.'
def check_port(port):
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
try:
s.bind(('localhost', port))
del s
except socket.error, err:
sys.exit('aborting, port %d already in use (%s)' % (port, str(err)))
def check_ports(config):
portsToCheck = []
portsToCheck.append(config.getint('metaserver', 'clientport'))
portsToCheck.append(config.getint('metaserver', 'chunkport'))
portsToCheck.append(config.getint('webui', 'webport'))
for p in portsToCheck:
check_port(p)
def kill_running_program_pid(binaryPath, runDir):
if binaryPath == Globals.METASERVER:
name = 'metaserver'
elif binaryPath == Globals.WEBSERVER:
name = 'webui'
else:
name = ''
if 0 < len(name) and 0 < len(runDir):
try:
pidf = '%s/%s.pid' % (runDir, name)
f = open(pidf, 'r')
line = f.readline()
f.close()
os.unlink(pidf)
pid = int(line.strip())
os.kill(pid, signal.SIGTERM)
except:
pass
else:
kill_running_program(binaryPath)
def kill_running_program(binaryPath):
if sys.platform in ('darwin', 'Darwin'):
checkPath = os.path.split(binaryPath)[1]
if not checkPath:
return
cmd = ('ps -ef | grep %s | grep %s | grep -v grep | awk \'{print $2}\''
% (os.getlogin(), checkPath))
res = subprocess.Popen(cmd, shell=True,
stdout=subprocess.PIPE).communicate()
pids = res[0].split('\n')
for pid in pids:
if pid.strip() != '':
os.kill(int(pid.strip()), signal.SIGTERM)
else:
if binaryPath.find('qfsstatus') >= 0:
cmd = ('ps -ef | grep %s | grep /qfsbase/ | grep %s | grep -v grep | awk \'{print $2}\''
% (os.getlogin(), binaryPath))
res = subprocess.Popen(cmd, shell=True,
stdout=subprocess.PIPE).communicate()
pids = res[0].split('\n')
for pid in pids:
if pid.strip() != '':
os.kill(int(pid.strip()), signal.SIGTERM)
return
pids = subprocess.Popen(['pidof', binaryPath],
stdout=subprocess.PIPE).communicate()
for pid in pids[0].strip().split():
os.kill(int(pid), signal.SIGTERM)
def run_command(cmd):
return subprocess.check_call(cmd, shell=True)
def rm_tree(path):
if '/data_ssd/' in path:
shutil.rmtree(path)
else:
print >> sys.stderr, 'refusing to remove path %r' % path,
print >> sys.stderr, 'because it does not contain /data_ssd/'
def duplicate_tree(src, dst):
"""Copy files & directories from SRC directory to DST directory.
If DST does not exist, create it. If DST's children with same SRC
children names exist then overwrite them.
"""
if os.path.exists(dst) and not os.path.isdir(dst):
sys.exit('Cannot duplicate directory to a non-directory')
if not os.path.exists(dst):
os.makedirs(dst)
for li in os.listdir(src):
srcPath = os.path.join(src, li)
dstPath = os.path.join(dst, li)
if os.path.isdir(dstPath):
rm_tree(dstPath)
else:
if os.path.exists(dstPath):
os.unlink(dstPath)
if os.path.isdir(srcPath):
shutil.copytree(srcPath, dstPath)
else:
shutil.copyfile(srcPath, dstPath)
def mkdir_p(dirname):
try:
os.makedirs(dirname)
except OSError, err:
if err.errno != errno.EEXIST:
sys.exit('Failed to create directory')
else:
if not os.path.isdir(dirname):
sys.exit('% exists, but is not a directory!' % dirname)
def parse_command_line():
action_keys = { 'install' : True,
'start' : True,
'stop' : True,
'uninstall' : True }
argv0Dir = os.path.dirname(sys.argv[0])
defaultConfig = os.path.join(argv0Dir, 'sample_setup_metaserver.cfg')
defaultConfig = os.path.abspath(defaultConfig)
defaultSrcDir = os.path.join(argv0Dir, '../..')
defaultSrcDir = os.path.abspath(defaultSrcDir)
defaultRelDir = os.path.join(argv0Dir, '../../build/release')
defaultRelDir = os.path.abspath(defaultRelDir)
if not os.path.exists(defaultRelDir):
defaultRelDir = os.path.join(argv0Dir, '../..')
defaultRelDir = os.path.abspath(defaultRelDir)
formatter = IndentedHelpFormatter(max_help_position=50, width=120)
usage = "usage: ./%prog [options] -a <ACTION>"
parser = OptionParser(usage, formatter=formatter, add_help_option=False)
parser.add_option('-c', '--config-file', action='store',
default=defaultConfig, metavar='FILE', help='Setup config file.')
parser.add_option('-a', '--action', action='store', default=None,
metavar='ACTION', help='One of install, uninstall, or stop.')
parser.add_option('-r', '--release-dir', action='store',
default=defaultRelDir, metavar='DIR', help='QFS release directory.')
parser.add_option('-s', '--source-dir', action='store',
default=defaultSrcDir, metavar='DIR', help='QFS source directory.')
parser.add_option('-u', '--auth', action='store_true',
help="Configure QFS authentication.")
parser.add_option('-h', '--help', action='store_true',
help="Print this help message and exit.")
actions = """
Actions:
install = setup meta and chunk server directories, restarting/starting them
start = start meta and chunk servers
stop = stop meta and chunk servers
uninstall = remove meta and chunk server directories after stopping them"""
sampleSession = """
Hello World example of a client session:
# Install sample server setup, only needed once.
%s/examples/sampleservers/sample_setup_metaserver.py -a install
PATH="%s:${PATH}"
# Make temp directory.
qfsshell -s localhost -p 20000 -q -- mkdir /qfs/tmp
# Create file containing Hello World, Reed-Solomon encoded, replication 1.
echo 'Hello World' \
| cptoqfs -s localhost -p 20000 -S -r 1 -k /qfs/tmp/helloworld -d -
# Cat file content.
qfscat -s localhost -p 20000 /qfs/tmp/helloworld
# Stat file to see encoding (RS or not), replication level, mtime.
qfsshell -s localhost -p 20000 -q -- stat /qfs/tmp/helloworld
# Copy file locally to current directory.
cpfromqfs -s localhost -p 20000 -k /qfs/tmp/helloworld -d ./helloworld
# Remove file from QFS.
qfsshell -s localhost -p 20000 -q -- rm /qfs/tmp/helloworld
# Stop the server and remove the custom install.
%s/examples/sampleservers/sample_setup_metaserver.py -a stop
%s/examples/sampleservers/sample_setup_metaserver.py -a uninstall
Use qfs to manipulate files the same way you would use 'hadoop fs':
# Set qfs command alias.
alias qfs='%s/bin/tools/qfs -cfg ~/qfsbase/client/clidefault.prp'
qfs -h
qfs -stat /
qfs -mkdir /some-dir
qfs -ls /
Did you notice how fast it is? :)
Run the following to test with hadoop:
%s/src/test-scripts/qfshadoop.sh
"""
# An install sets up all config files and (re)starts the servers.
# An uninstall stops the servers and removes the config files.
# A stop stops the servers.
opts, args = parser.parse_args()
sampleSession = sampleSession % (
opts.source_dir,
opts.release_dir,
opts.source_dir,
opts.source_dir,
opts.release_dir,
opts.source_dir
)
if opts.help:
parser.print_help()
print actions
print sampleSession
print
posix._exit(0)
e = []
if not os.path.isfile(opts.config_file):
e.append("specified 'config-file' does not exist: %s"
% opts.config_file)
if not opts.action:
e.append("'action' must be specified")
elif not action_keys.has_key(opts.action):
e.append("invalid 'action' specified: %s" % opts.action)
if not os.path.isdir(opts.release_dir):
e.append("specified 'release-dir' does not exist: %s"
% opts.release_dir)
if not os.path.isdir(opts.source_dir):
e.append("specified 'source-dir' does not exist: %s" % opts.source_dir)
if len(e) > 0:
parser.print_help()
print actions
print sampleSession
print
for error in e:
print "*** %s" % error
print
posix._exit(1)
return opts
def do_cleanup(config, doUninstall):
if config.has_section('metaserver'):
metaRunDir = config.get('metaserver', 'rundir')
if metaRunDir:
kill_running_program_pid(Globals.METASERVER, metaRunDir)
if doUninstall and os.path.isdir(metaRunDir):
rm_tree(metaRunDir)
if config.has_section('webui'):
webDir = config.get('webui', 'rundir')
if webDir:
kill_running_program_pid(Globals.WEBSERVER, webDir)
if doUninstall and os.path.isdir(webDir):
rm_tree(webDir)
if config.has_section('certs'):
certsDir = config.get('certs', 'rundir')
if doUninstall and os.path.isdir(certsDir):
rm_tree(certsDir)
if config.has_section('client'):
clientDir = config.get('client', 'rundir')
if doUninstall and os.path.isdir(clientDir):
rm_tree(clientDir)
if doUninstall:
qfsbase = os.path.expanduser('~/qfsbase')
if os.path.isdir(qfsbase) and not os.path.islink(qfsbase):
os.rmdir(qfsbase)
print 'Uninstall - OK.'
else:
print 'Stop servers - OK.'
def setup_directories(config, authFlag):
if config.has_section('metaserver'):
metaRunDir = config.get('metaserver', 'rundir')
if metaRunDir:
mkdir_p(metaRunDir);
mkdir_p(metaRunDir + '/conf')
mkdir_p(metaRunDir + '/checkpoints')
mkdir_p(metaRunDir + '/logs')
if config.has_section('client'):
clientDir = config.get('client', 'rundir')
if clientDir:
mkdir_p(clientDir)
if config.has_section('webui'):
webDir = config.get('webui', 'rundir')
if webDir:
mkdir_p(webDir);
mkdir_p(webDir + '/conf')
mkdir_p(webDir + '/docroot')
print 'Setup directories - OK.'
def check_directories(config):
metaRunDir = None
webDir = None
if config.has_section('metaserver'):
metaRunDir = config.get('metaserver', 'rundir')
if config.has_section('webui'):
webDir = config.get('webui', 'rundir')
if not metaRunDir or not webDir:
sys.exit('Malformed config file.')
if not os.path.exists(metaRunDir) or not os.path.exists(webDir):
sys.exit('Cannot start without install. Please run with "-a install" first.')
print 'Check directories - OK.'
def setup_config_files(config, authFlag):
if config.has_section('client'):
clientDir = config.get('client', 'rundir')
else:
clientDir = None
if authFlag:
if 'certs' not in config.sections():
sys.exit('Required metaserver certs not found in config')
certsDir = config.get('certs', 'rundir')
if not certsDir:
sys.exit('Required certs certsdir not found in config')
defaultUser = getpass.getuser()
if run_command('%s %s meta root %s' % (
shell_quote(Globals.MKCERTS),
shell_quote(certsDir),
shell_quote(defaultUser))) != 0:
sys.exit('Create X509 certs failure')
if clientDir:
clientFile = open(clientDir + '/client.prp', 'w')
print >> clientFile, 'client.auth.X509.X509PemFile = %s/%s.crt' % (certsDir, defaultUser)
print >> clientFile, 'client.auth.X509.PKeyPemFile = %s/%s.key' % (certsDir, defaultUser)
print >> clientFile, 'client.auth.X509.CAFile = %s/qfs_ca/cacert.pem' % certsDir
clientFile.close()
if clientDir:
defaultConfig = clientDir + '/clidefault.prp'
clientFile = open(defaultConfig, 'w')
print >> clientFile, 'fs.default = qfs://192.168.5.201:20000'
if authFlag:
print >> clientFile, 'client.auth.X509.X509PemFile = %s/%s.crt' % (certsDir, defaultUser)
print >> clientFile, 'client.auth.X509.PKeyPemFile = %s/%s.key' % (certsDir, defaultUser)
print >> clientFile, 'client.auth.X509.CAFile = %s/qfs_ca/cacert.pem' % certsDir
clientFile.close()
if 'metaserver' not in config.sections():
sys.exit('Required metaserver section not found in config')
metaRunDir = config.get('metaserver', 'rundir')
if not metaRunDir:
sys.exit('Required metaserver rundir not found in config')
metaserverHostname = config.get('metaserver', 'hostname')
metaserverClientPort = config.getint('metaserver', 'clientport')
metaserverChunkPort = config.getint('metaserver', 'chunkport')
clusterKey = config.get('metaserver', 'clusterkey')
# Metaserver.
metaFile = open(metaRunDir + '/conf/MetaServer.prp', 'w')
print >> metaFile, 'metaServer.clientPort = %d' % metaserverClientPort
print >> metaFile, 'metaServer.chunkServerPort = %d' % metaserverChunkPort
print >> metaFile, 'metaServer.clusterKey = %s' % clusterKey
print >> metaFile, 'metaServer.cpDir = %s/checkpoints' % metaRunDir
print >> metaFile, 'metaServer.logDir = %s/logs' % metaRunDir
print >> metaFile, 'metaServer.recoveryInterval = 1'
print >> metaFile, 'metaServer.msgLogWriter.logLevel = DEBUG'
print >> metaFile, 'metaServer.msgLogWriter.maxLogFileSize = 1e6'
print >> metaFile, 'metaServer.msgLogWriter.maxLogFiles = 10'
print >> metaFile, 'metaServer.minChunkservers = 1'
print >> metaFile, 'metaServer.clientThreadCount = 4'
print >> metaFile, 'metaServer.rootDirUser = %d' % os.getuid()
print >> metaFile, 'metaServer.rootDirGroup = %d' % os.getgid()
print >> metaFile, 'metaServer.rootDirMode = 0777'
print >> metaFile, 'metaServer.pidFile = %s/metaserver.pid' % metaRunDir
if authFlag:
print >> metaFile, 'metaServer.clientAuthentication.X509.X509PemFile = %s/meta.crt' % certsDir
print >> metaFile, 'metaServer.clientAuthentication.X509.PKeyPemFile = %s/meta.key' % certsDir
print >> metaFile, 'metaServer.clientAuthentication.X509.CAFile = %s/qfs_ca/cacert.pem' % certsDir
print >> metaFile, 'metaServer.clientAuthentication.whiteList = %s root' % defaultUser
print >> metaFile, 'metaServer.CSAuthentication.X509.X509PemFile = %s/meta.crt' % certsDir
print >> metaFile, 'metaServer.CSAuthentication.X509.PKeyPemFile = %s/meta.key' % certsDir
print >> metaFile, 'metaServer.CSAuthentication.X509.CAFile = %s/qfs_ca/cacert.pem' % certsDir
print >> metaFile, 'metaServer.CSAuthentication.blackList = none'
metaFile.close()
# Webserver.
if 'webui' not in config.sections():
return
webDir = config.get('webui', 'rundir')
if not webDir:
return
webFile = open(webDir + '/conf/WebUI.cfg', 'w')
print >> webFile, '[webserver]'
print >> webFile, 'webServer.metaserverHost = %s' % metaserverHostname
print >> webFile, 'webServer.metaserverPort = %d' % metaserverClientPort
print >> webFile, 'webServer.host = 0.0.0.0'
print >> webFile, 'webServer.port = %d' % config.getint('webui', 'webport')
print >> webFile, 'webServer.docRoot = %s/docroot' % webDir
print >> webFile, 'webServer.allmachinesfn = /dev/null'
print >> webFile, 'webServer.displayPorts = True'
print >> webFile, 'webServer.pidFile = %s/webui.pid' % webDir
print >> webFile, '[chunk]'
print >> webFile, 'refreshInterval = 5'
print >> webFile, 'currentSize = 30'
print >> webFile, 'currentSpan = 10'
print >> webFile, 'hourlySize = 30'
print >> webFile, 'hourlySpan =120'
print >> webFile, 'daylySize = 24'
print >> webFile, 'daylySpan = 3600'
print >> webFile, 'monthlySize = 30'
print >> webFile, 'monthlySpan = 86400'
print >> webFile, 'displayPorts = True'
print >> webFile, 'predefinedHeaders = Buffer-usec-wait-avg&D-Timer-overrun-count&D-Timer-overrun-sec&XMeta-server-location&Client-active&D-Buffer-req-denied-bytes&D-CPU-sys&D-CPU-user&D-Disk-read-bytes&D-Disk-read-count&D-Disk-write-bytes&D-Disk-write-count&Write-appenders&D-Disk-read-errors&D-Disk-write-errors&XMeta-location'
print >> webFile, 'predefinedChunkDirHeaders = Chunks&Dev-id&Read-bytes&D-Read-bytes&Read-err&D-Read-err&Read-io&D-Read-io&D-Read-time-microsec&Read-timeout&Space-avail&Space-util-pct&Started-ago&Stopped-ago&Write-bytes&D-Write-bytes&Write-err&D-Write-err&Write-io&D-Write-io&D-Write-time-microsec&Write-timeout&Chunk-server&Chunk-dir'
webFile.close()
print 'Setup config files - OK.'
def copy_files(config, sourceDir):
# Currently, only the web CSS stuff need be copied.
if 'webui' in config.sections():
webDir = config.get('webui', 'rundir')
if webDir:
webDst = webDir + '/docroot'
webSrc = sourceDir + '/webui/files'
duplicate_tree(webSrc, webDst)
def start_servers(config, whichServers, createNewFsFlag, authFlag):
startMeta = whichServers in ('meta', 'all')
startWeb = whichServers in ('web', 'all')
errors = 0
if startMeta:
startWeb = True
metaRunDir = config.get('metaserver', 'rundir')
kill_running_program_pid(Globals.METASERVER, metaRunDir)
if metaRunDir:
metaConf = metaRunDir + '/conf/MetaServer.prp'
metaLog = metaRunDir + '/MetaServer.log'
metaOut = metaRunDir + '/MetaServer.out'
if createNewFsFlag and \
not os.listdir(metaRunDir + '/checkpoints') and \
not os.listdir(metaRunDir + '/logs'):
command = '%s -c %s > %s 2>&1' % (
shell_quote(Globals.METASERVER),
shell_quote(metaConf),
shell_quote(metaOut))
if run_command(command) > 0:
print '*** metaserver failed create empty file system'
errors = errors + 1
if errors == 0:
command = '%s %s %s > %s 2>&1 &' % (
shell_quote(Globals.METASERVER),
shell_quote(metaConf),
shell_quote(metaLog),
shell_quote(metaOut))
if run_command(command) > 0:
print '*** metaserver failed to start'
errors = errors + 1
else:
print 'Meta server started, listening on %s:%d' %(
config.get('metaserver', 'hostname'),
config.getint('metaserver', 'clientport'))
if startWeb:
webDir = config.get('webui', 'rundir')
kill_running_program_pid(Globals.WEBSERVER, webDir)
if webDir:
webConf = webDir + '/conf/WebUI.cfg'
webLog = webDir + '/webui.log'
command = '%s %s > %s 2>&1 &' % (
shell_quote(Globals.WEBSERVER),
shell_quote(webConf),
shell_quote(webLog))
if run_command(command) > 0:
print '*** web ui failed to start'
errors = errors + 1
else:
print 'Web ui started: http://localhost:%d' % (
config.getint('webui', 'webport'))
if errors > 0:
print 'Started servers - FAILED.'
else:
print 'Started servers - OK.'
defaultConfig=None
if config.has_section('client'):
clientDir = config.get('client', 'rundir')
if authFlag and os.path.isfile(clientDir + '/client.prp'):
print 'QFS authentication required.'
defaultConfig = clientDir + '/clidefault.prp'
if os.path.isfile(defaultConfig):
print 'Default QFS client configuration file: %s' % defaultConfig
if createNewFsFlag and Globals.QFSTOOL:
if defaultConfig:
cfgOpt = " -cfg %s" % shell_quote(defaultConfig)
command = '%s%s -mkdir %s' % (
shell_quote(Globals.QFSTOOL),
cfgOpt,
shell_quote('/user/' + getpass.getuser()),
)
print 'Creating default user directory by executing:\n%s' % command
if run_command(command) != 0:
print '*** failed to created user directory'
else:
print '- OK.'
# Need to massage the ~ in the config file paths. Otherwise a directory
# with name "~" would get created at $CWD.
def parse_config(configFile):
config = ConfigParser.ConfigParser()
config.read(configFile);
for section in config.sections():
dir = config.get(section, 'rundir')
config.set(section, 'rundir', os.path.expanduser(dir))
return config
if __name__ == '__main__':
opts = parse_command_line()
config = parse_config(opts.config_file)
if opts.action in ('uninstall', 'stop'):
do_cleanup(config, opts.action == 'uninstall')
posix._exit(0)
check_binaries(opts.release_dir, opts.source_dir, opts.auth)
check_ports(config)
if opts.action == 'install':
setup_directories(config, opts.auth)
setup_config_files(config, opts.auth)
copy_files(config, opts.source_dir)
elif opts.action == 'start':
check_directories(config)
start_servers(config, 'all', opts.action == 'install', opts.auth)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment