Home assistant HUSBZB-1 fw update cheatsheet. SSH into your HA machine and then:
ha core stop
git clone https://github.com/walthowd/husbzb-firmware.git && cd husbzb-firmware
pip install pyserial
pip install xmodem
python3 ncp.py scan
python3 ncp.py flash -p /dev/ttyUSB1 -f ncp-uart-sw-6.7.8.ebl
python3 ncp.py scan
Researched by Robert Quattlebaum [email protected].
Last updated 2020-02-03.
| #!/bin/bash | |
| # | |
| # Create a 8GB eMMC image for Tesla Model S/X MCU1 | |
| # | |
| # Example usage: ./mkteslaemmcimg.sh ./vinXXXXX.img ./develop-2019.20.2.1-16-5659e07dfd.img | |
| # | |
| set -e | |
| FIRMWARE=$2 | |
| IMAGE=$1 |
| #!/usr/bin/env python | |
| """Grab a JPEG snapshot from a Ubiquiti camera at a specified interval. | |
| Usage: python uvcsnapshot.py -i INTERVAL -c CAMERA -p PASSWORD -o OUTPUT | |
| Required arguments: | |
| -i interval in seconds | |
| -c camera IP address | |
| -p camera password | |
| -o path to output directory |
| git clean -xfd | |
| git submodule foreach --recursive git clean -xfd | |
| git reset --hard | |
| git submodule foreach --recursive git reset --hard | |
| git submodule update --init --recursive |
