ebs raid chef code

ebs_raid.rb

include Opscode::Aws::Ec2


# Auto locates and attached ebs devices based on the data bag they reside in. The following test cases need to be performed.  Currently limited to 15 drives for the raid due to the drive mount point seek iteration logic.  This could be fixed to include more than 15 mount points.
# Create multiple resources with new node: PASS
#
# Re-attach multiple resources after a reboot: PASS
#
# Create resources across 2 runs.  First run creates first raid set, second run re-attaches then creates: PASS
# 
# Re-attach a different nodes data after terminating the original creator: PASS

# Installation:
# Copy into the providers directory of your cookbook.  In this example, I have chosen "brisk" as the cookbook
#
# Usage:
# Creates a 1 TB raid 0 drive with 10 drives at 100 GB each
# brisk_ebs_raid "create data dir /mnt/cassdata" do
#      mount_point /mnt/cassdata
#      disk_count 10
#      disk_size 100
#      action [:auto_attach]
#      notifies :restart, resources(:service => "cassandra")
#    end
#
# Author: Todd Nine
# 
action :auto_attach do
  
  Chef::Log.info("Executing the autolocate task")
  
  #Make sure the mdadm package is installed
  package "mdadm" do
    action :install
  end
  
  package "xfsprogs" do
    action :install
  end
  
  
  
  #we're done we successfully located what we needed
  if !locate_and_mount(@new_resource.mount_point)
    
    #If we get here, we couldn't auto attach, nor re-allocate an existing set of disks to ourselves.  Auto create the md devices
    #Find our first raid device
    number=0
    
    dir = "/dev/md#{number}"
    
    #TODO, this won't work with more than 10 md devices
    begin
      dir = "/dev/md#{number}"
      Chef::Log.info("md pre trim #{dir}")
      number +=1
    end while ::File.exists?(dir)
    
    
    dir = dir[5, dir.length]
    
    Chef::Log.debug("raid device is #{dir}")
    
    
    sd_dev = "sdh"
    
    begin
      sd_dev = sd_dev.next
      base_device = "/dev/#{sd_dev}1"
      Chef::Log.info("dev pre trim #{base_device}")
    end while ::File.exists?(base_device)
    
    Chef::Log.debug("sd device is #{sd_dev}")
    
    create_raid_disks(@new_resource.mount_point, dir, sd_dev, @new_resource.disk_count, @new_resource.disk_size)
    
    @new_resource.updated_by_last_action(true)
    
  end
  
  
  
  
  
end


private

#Attempt to find an unused data bag and mount all the EBS volumes to our system
def locate_and_mount(mount_path )
  
  if node[:aws].nil? || node[:aws][:raid].nil? || node[:aws][:raid][mount_path].nil?
    Chef::Log.info("No mount point found '#{mount_path}' for node")
    return false;
  end
  
  raid_dev =  node[:aws][:raid][mount_path][:raid_dev]
  
  raid_dev = "/dev/#{raid_dev}"
  
  Chef::Log.info("Raid device is #{raid_dev} and mount path is #{mount_path}")
  
  assemble_raid(raid_dev, mount_path)
  
  #Now mount the drive
  mount_device(raid_dev, mount_path)
  
  
  
  return true
  
end

##
#Assembles the raid if it doesn't already exist
##
def assemble_raid(raid_dev, mount_path)
  #D
  if ::File.exists?(raid_dev) 
    Chef::Log.info("Device #{raid_dev} exists skipping")
    return
  end
  
  Chef::Log.info("Raid device #{raid_dev} does not exist re-assembling")
  
  device_vol_map = node[:aws][:raid][mount_path][:devices]
  
  Chef::Log.debug("Devices for mount #{mount_path} are #{device_vol_map.pretty_inspect}")
  
  device_string = ""
  
  device_vol_map.keys.sort.each do |dev_device|
    attach_volume(dev_device, device_vol_map[dev_device])
    device_string += "/dev/#{dev_device} "
  end
  
  #Wait until all volumes are mounted
  ruby_block "wait" do
    block do
     true
    end
  end
  
  #Wait until all volumes are mounted
  ruby_block "wait" do
    block do
      Chef::Log.info("sleeping 10 seconds until EBS volumes have re-attached")
      sleep 10
    end
  end
  
  #Now that attach is done we re-build the md device
  execute "re-attaching raid device" do
    command "mdadm --assemble #{raid_dev} #{device_string}"
    creates raid_dev
    not_if "test -d #{raid_dev}"
    #    notifies :run, "ruby_block[setchanged]", :immediately
  end
end


def mount_device(raid_dev, mnt_point)
  #Create the mount point
  directory mnt_point do
    owner "root"
    group "nogroup"
    mode 0755
    recursive true
    action    :create
    not_if "test -d #{mnt_point}"
    #    notifies :run, "ruby_block[setchanged]", :immediately
  end
  
  
  
  #Mount the device 
  mount mnt_point do
    device raid_dev
    fstype "xfs"
    options "rw,noatime,inode64"
    action :mount
    #    notifies :run, "ruby_block[setchanged]", :immediately
  end
  
end




#Attach all existing ami instances if they exist on this node, if not, we want an error to occur  Detects disk from node information
def attach_volume(disk_dev, volume_id)
  
  disk_dev_path = "/dev/#{disk_dev}"
  
  aws = data_bag_item("deployment", "aws")
  
  Chef::Log.info("Attaching existing ebs volume id #{volume_id} for device #{disk_dev_path}")
  
  aws_ebs_volume "#{disk_dev_path}" do
    aws_access_key          aws['accesskey']
    aws_secret_access_key   aws['secretkey']
    device                  disk_dev_path
    name                    disk_dev
    volume_id               volume_id
    action                  [:attach]
    provider                "aws_ebs_volume"  
  end
  
  
  
  
end


#Mount point for where to mount I.E /mnt/filesystem
#Raid dev.  I.E. md0
#Diskset    I.E sdi (which creates sdi1-sdi<n>
#Raid size.  The total size of the array
def create_raid_disks(mnt_point, raid_dev, disk_dev, num_disks, disk_size)
  
  #Create the mount point data bag  
  devices = {}
  
  
  #For each volume add information to the mount metadata  
   (1..num_disks).each do |i|
    
    disk_dev_path = "#{disk_dev}#{i}"
    
    aws = data_bag_item("deployment", "aws")
    
    aws_ebs_volume "#{disk_dev_path}" do
      aws_access_key          aws['accesskey']
      aws_secret_access_key   aws['secretkey']
      size                    disk_size
      device                  "/dev/#{disk_dev_path}"
      name                    disk_dev_path
      action                  [:create, :attach]
      provider                "aws_ebs_volume"  
      
      #set up our data bag info
      devices[disk_dev_path] = "pending"
      Chef::Log.info("creating ebs volume for device #{disk_dev_path} with size #{disk_size}")
    end
    
  end
  
  devices_string = ""
  
  #Blocking task
  
  devices.keys.sort.each do  |k|
    devices_string += "/dev/#{k} "
  end
  
  Chef::Log.debug("finsihed sorting devices #{devices_string}")
  
  Chef::Log.debug("sleeping 10 seconds to let drives attach")
  
  sleep 10
  
  #Create the raid device on our system
  execute "creating raid device" do
    Chef::Log.info("creating raid device /dev/#{raid_dev} with raid devices #{devices_string}")
    command "mdadm --create /dev/#{raid_dev} --level=0 --raid-devices=#{devices.size} #{devices_string}"
    creates "/dev/#{raid_dev}"
  end
  
  #Format the device
  execute "formatting device" do
    command "mkfs.xfs /dev/#{raid_dev}"
    only_if "xfs_admin -l /dev/#{raid_dev} 2>&1 | grep -qx 'xfs_admin: /dev/#{raid_dev} is not a valid XFS filesystem (unexpected SB magic number 0x00000000)'"
  end
  
  #Mount the device
  mount_device("/dev/#{raid_dev}", mnt_point)
  
  #Not invoked until the volumes have been successfully created and attached
  ruby_block "databagsetup" do
    
    block do
      Chef::Log.info("finished creating disks")
      
      
      devices.each_pair do |key, value|
        value = node[:aws][:ebs_volume][key][:volume_id]
        devices[key] =  value
        Chef::Log.info("value is #{value}")
      end
      
      #Assemble all the data bag meta data
      mount_meta = {
        "raid_dev" => raid_dev,
        "devices" => devices
      }
      
      raid_map = node[:aws][:raid]
      
      if raid_map.nil?
        node[:aws][:raid] = {}
      end
      
      node[:aws][:raid][mnt_point] = mount_meta
      node.save
      
    end
  end
  
  #Now format and create the device
  
end