arduinoboard

/*
 * PIR sensor tester
 */
 
int ledPin = 13;                // choose the pin for the LED
int inputPin = 2;               // choose the input pin (for PIR sensor)
int pirState = LOW;             // we start, assuming no motion detected
int val = 0;                    // variable for reading the pin status
 
void setup() {

arduinoboard

/*

 Project: Use Arduino to control a TX2/RX2-based radio control transmitter/receiver   
 Developer: Hazim Bitar/TechBitar
 Date: Nov 18, 2011
 Web: http://techbitar.blogspot.com

 */

int TX2Pin01 = 8;  // Right 

arduinoboard

// USE_GITHUM_USERNAME=cosmo510

arduinoboard

/*
  Blink
  Turns on an LED on for one second, then off for one second, repeatedly.
 
  This example code is in the public domain.
 */

void setup() {                
  // initialize the digital pin as an output.
  // Pin 13 has an LED connected on most Arduino boards:

arduinoboard

/* 
Rotating Plant Stand
Rotates one revolution every two days, moving a small amount every half an hour
Based on example byTom Igoe 

 */

#include <Stepper.h>

arduinoboard

/*
  Blink
  Turns on an LED on for one second, then off for one second, repeatedly.
 
  This example code is in the public domain.
 */

void setup() {                
  // initialize the digital pin as an output.
  // Pin 13 has an LED connected on most Arduino boards:

arduinoboard

void setup() {
  Serial.begin(9600); 
}

void loop() {
  Serial.println("Dave made me do it. Really");
}

arduinoboard

void setup() {
  Serial.begin(9600);
}

void loop() {
 
  Serial.println("Arf Arf Arf");
}

arduinoboard

void setup() {
  Serial.begin(9600);
}

void loop() {
 
  Serial.println("Arf Arf Arf");
}

arduinoboard

void setup() {
  Serial.begin(9600);
}

void loop() {
 
  Serial.println("Arf Arf Arf");
}