Cilium 1.3 manifest

cilium.yaml

---
apiVersion: v1
kind: ConfigMap
metadata:
  name: cilium-config
  namespace: kube-system
data:
  # This etcd-config contains the etcd endpoints of your cluster. If you use
  # TLS please make sure you follow the tutorial in https://cilium.link/etcd-config
  etcd-config: |-
    ---
    endpoints:
      - https://cilium-etcd-client.kube-system.svc:2379
    #
    # In case you want to use TLS in etcd, uncomment the 'ca-file' line
    # and create a kubernetes secret by following the tutorial in
    # https://cilium.link/etcd-config
    ca-file: '/var/lib/etcd-secrets/etcd-client-ca.crt'
    #
    # In case you want client to server authentication, uncomment the following
    # lines and create a kubernetes secret by following the tutorial in
    # https://cilium.link/etcd-config
    key-file: '/var/lib/etcd-secrets/etcd-client.key'
    cert-file: '/var/lib/etcd-secrets/etcd-client.crt'

  # If you want to run cilium in debug mode change this value to true
  debug: "false"

  # Enable IPv4 addressing. If enabled, all endpoints are allocated an IPv4
  # address.
  enable-ipv4: "true"

  # Enable IPv6 addressing. If enabled, all endpoints are allocated an IPv6
  # address.
  enable-ipv6: "false"

  # If a serious issue occurs during Cilium startup, this
  # invasive option may be set to true to remove all persistent
  # state. Endpoints will not be restored using knowledge from a
  # prior Cilium run, so they may receive new IP addresses upon
  # restart. This also triggers clean-cilium-bpf-state.
  clean-cilium-state: "true"
  # If you want to clean cilium BPF state, set this to true;
  # Removes all BPF maps from the filesystem. Upon restart,
  # endpoints are restored with the same IP addresses, however
  # any ongoing connections may be disrupted briefly.
  # Loadbalancing decisions will be reset, so any ongoing
  # connections via a service may be loadbalanced to a different
  # backend after restart.
  clean-cilium-bpf-state: "true"

  # In Cilium 1.0, all traffic from the host, including from local processes
  # and traffic that is masqueraded from the outside world to the host IP,
  # would be classified as from the host entity (reserved:host label).
  # Furthermore, to allow Kubernetes agents to perform health checks over IP
  # into the endpoints, the host is allowed by default. This means that all
  # traffic from the outside world is also allowed by default, regardless of
  # security policy.
  #
  # This option was introduced in Cilium 1.1 to disable this behaviour. It must
  # be explicitly set to "false" to take effect on Cilium 1.3 or earlier.
  # Cilium 1.4 sets this to "false" by default if it is not specified in the
  # ConfigMap.
  #
  # This option has been deprecated, it will be removed in Cilium 1.5 or later.
  #
  # For more information, see https://cilium.link/host-vs-world
  #legacy-host-allows-world: "false"

  # If you want cilium monitor to aggregate tracing for packets, set this level
  # to "low", "medium", or "maximum". The higher the level, the less packets
  # that will be seen in monitor output.
  monitor-aggregation-level: "none"

  # ct-global-max-entries-* specifies the maximum number of connections
  # supported across all endpoints, split by protocol: tcp or other. One pair
  # of maps uses these values for IPv4 connections, and another pair of maps
  # use these values for IPv6 connections.
  #
  # If these values are modified, then during the next Cilium startup the
  # tracking of ongoing connections may be disrupted. This may lead to brief
  # policy drops or a change in loadbalancing decisions for a connection.
  #
  # For users upgrading from Cilium 1.2 or earlier, to minimize disruption
  # during the upgrade process, comment out these options.
  ct-global-max-entries-tcp: "524288"
  ct-global-max-entries-other: "262144"

  # Pre-allocation of map entries allows per-packet latency to be reduced, at
  # the expense of up-front memory allocation for the entries in the maps. The
  # default value below will minimize memory usage in the default installation;
  # users who are sensitive to latency may consider setting this to "true".
  #
  # This option was introduced in Cilium 1.4. Cilium 1.3 and earlier ignore
  # this option and behave as though it is set to "true".
  #
  # If this value is modified, then during the next Cilium startup the restore
  # of existing endpoints and tracking of ongoing connections may be disrupted.
  # This may lead to policy drops or a change in loadbalancing decisions for a
  # connection for some time. Endpoints may need to be recreated to restore
  # connectivity.
  #
  # If this option is set to "false" during an upgrade from 1.3 or earlier to
  # 1.4 or later, then it may cause one-time disruptions during the upgrade.
  preallocate-bpf-maps: "false"

  # Regular expression matching compatible Istio sidecar istio-proxy
  # container image names
  sidecar-istio-proxy-image: "cilium/istio_proxy"

  # Encapsulation mode for communication between nodes
  # Possible values:
  #   - disabled
  #   - vxlan (default)
  #   - geneve
  tunnel: "vxlan"

  # Name of the cluster. Only relevant when building a mesh of clusters.
  cluster-name: default

  # Unique ID of the cluster. Must be unique across all conneted clusters and
  # in the range of 1 and 255. Only relevant when building a mesh of clusters.
  #cluster-id: 1

  # Interface to be used when running Cilium on top of a CNI plugin.
  # For flannel, use "cni0"
  flannel-master-device: ""
  # When running Cilium with policy enforcement enabled on top of a CNI plugin
  # the BPF programs will be installed on the network interface specified in
  # 'flannel-master-device' and on all network interfaces belonging to
  # a container. When the Cilium DaemonSet is removed, the BPF programs will
  # be kept in the interfaces unless this option is set to "true".
  flannel-uninstall-on-exit: "false"
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  labels:
    k8s-app: cilium
    kubernetes.io/cluster-service: "true"
  name: cilium
  namespace: kube-system
spec:
  selector:
    matchLabels:
      k8s-app: cilium
      kubernetes.io/cluster-service: "true"
  template:
    metadata:
      annotations:
        prometheus.io/port: "9090"
        prometheus.io/scrape: "true"
        # This annotation plus the CriticalAddonsOnly toleration makes
        # cilium to be a critical pod in the cluster, which ensures cilium
        # gets priority scheduling.
        # https://kubernetes.io/docs/tasks/administer-cluster/guaranteed-scheduling-critical-addon-pods/
        scheduler.alpha.kubernetes.io/critical-pod: ""
        scheduler.alpha.kubernetes.io/tolerations: '[{"key":"dedicated","operator":"Equal","value":"master","effect":"NoSchedule"}]'
      labels:
        k8s-app: cilium
        kubernetes.io/cluster-service: "true"
    spec:
      containers:
      - args:
        - --debug=$(CILIUM_DEBUG)
        - --kvstore=etcd
        - --kvstore-opt=etcd.config=/var/lib/etcd-config/etcd.config
        command:
        - cilium-agent
        env:
        - name: K8S_NODE_NAME
          valueFrom:
            fieldRef:
              apiVersion: v1
              fieldPath: spec.nodeName
        - name: CILIUM_K8S_NAMESPACE
          valueFrom:
            fieldRef:
              apiVersion: v1
              fieldPath: metadata.namespace
        - name: CILIUM_DEBUG
          valueFrom:
            configMapKeyRef:
              key: debug
              name: cilium-config
        - name: CILIUM_ENABLE_IPV4
          valueFrom:
            configMapKeyRef:
              key: enable-ipv4
              name: cilium-config
              optional: true
        - name: CILIUM_ENABLE_IPV6
          valueFrom:
            configMapKeyRef:
              key: enable-ipv6
              name: cilium-config
              optional: true
          # Note: this variable is a no-op if not defined, and is used in the
          # prometheus examples.
        - name: CILIUM_PROMETHEUS_SERVE_ADDR
          valueFrom:
            configMapKeyRef:
              key: prometheus-serve-addr
              name: cilium-metrics-config
              optional: true
        - name: CILIUM_LEGACY_HOST_ALLOWS_WORLD
          valueFrom:
            configMapKeyRef:
              key: legacy-host-allows-world
              name: cilium-config
              optional: true
        - name: CILIUM_SIDECAR_ISTIO_PROXY_IMAGE
          valueFrom:
            configMapKeyRef:
              key: sidecar-istio-proxy-image
              name: cilium-config
              optional: true
        - name: CILIUM_TUNNEL
          valueFrom:
            configMapKeyRef:
              key: tunnel
              name: cilium-config
              optional: true
        - name: CILIUM_MONITOR_AGGREGATION_LEVEL
          valueFrom:
            configMapKeyRef:
              key: monitor-aggregation-level
              name: cilium-config
              optional: true
        - name: CILIUM_CLUSTERMESH_CONFIG
          value: /var/lib/cilium/clustermesh/
        - name: CILIUM_CLUSTER_NAME
          valueFrom:
            configMapKeyRef:
              key: cluster-name
              name: cilium-config
              optional: true
        - name: CILIUM_CLUSTER_ID
          valueFrom:
            configMapKeyRef:
              key: cluster-id
              name: cilium-config
              optional: true
        - name: CILIUM_GLOBAL_CT_MAX_TCP
          valueFrom:
            configMapKeyRef:
              key: ct-global-max-entries-tcp
              name: cilium-config
              optional: true
        - name: CILIUM_GLOBAL_CT_MAX_ANY
          valueFrom:
            configMapKeyRef:
              key: ct-global-max-entries-other
              name: cilium-config
              optional: true
        - name: CILIUM_PREALLOCATE_BPF_MAPS
          valueFrom:
            configMapKeyRef:
              key: preallocate-bpf-maps
              name: cilium-config
              optional: true
        - name: CILIUM_FLANNEL_MASTER_DEVICE
          valueFrom:
            configMapKeyRef:
              key: flannel-master-device
              name: cilium-config
              optional: true
        - name: CILIUM_FLANNEL_UNINSTALL_ON_EXIT
          valueFrom:
            configMapKeyRef:
              key: flannel-uninstall-on-exit
              name: cilium-config
              optional: true
        image: docker.io/cilium/cilium:v1.3.2
        imagePullPolicy: Always
        lifecycle:
          postStart:
            exec:
              command:
              - /cni-install.sh
          preStop:
            exec:
              command:
              - /cni-uninstall.sh
        livenessProbe:
          exec:
            command:
            - cilium
            - status
          failureThreshold: 10
          # The initial delay for the liveness probe is intentionally large to
          # avoid an endless kill & restart cycle if in the event that the initial
          # bootstrapping takes longer than expected.
          initialDelaySeconds: 120
          periodSeconds: 10
          successThreshold: 1
          timeoutSeconds: 1
        name: cilium-agent
        ports:
        - containerPort: 9090
          hostPort: 9090
          name: prometheus
          protocol: TCP
        readinessProbe:
          exec:
            command:
            - cilium
            - status
          failureThreshold: 3
          initialDelaySeconds: 5
          periodSeconds: 5
          successThreshold: 1
          timeoutSeconds: 1
        securityContext:
          capabilities:
            add:
            - NET_ADMIN
          privileged: true
        volumeMounts:
        - mountPath: /sys/fs/bpf
          name: bpf-maps
        - mountPath: /var/run/cilium
          name: cilium-run
        - mountPath: /host/opt/cni/bin
          name: cni-path
        - mountPath: /host/etc/cni/net.d
          name: etc-cni-netd
        - mountPath: /var/run/docker.sock
          name: docker-socket
          readOnly: true
        - mountPath: /var/lib/etcd-config
          name: etcd-config-path
          readOnly: true
        - mountPath: /var/lib/etcd-secrets
          name: etcd-secrets
          readOnly: true
        - mountPath: /var/lib/cilium/clustermesh
          name: clustermesh-secrets
          readOnly: true
      dnsPolicy: ClusterFirstWithHostNet
      hostNetwork: true
      initContainers:
      - command:
        - /init-container.sh
        env:
        - name: CLEAN_CILIUM_STATE
          valueFrom:
            configMapKeyRef:
              key: clean-cilium-state
              name: cilium-config
              optional: true
        - name: CLEAN_CILIUM_BPF_STATE
          valueFrom:
            configMapKeyRef:
              key: clean-cilium-bpf-state
              name: cilium-config
              optional: true
        image: docker.io/cilium/cilium-init:2018-10-16
        imagePullPolicy: IfNotPresent
        name: clean-cilium-state
        securityContext:
          capabilities:
            add:
            - NET_ADMIN
          privileged: true
        volumeMounts:
        - mountPath: /sys/fs/bpf
          name: bpf-maps
        - mountPath: /var/run/cilium
          name: cilium-run
      priorityClassName: system-node-critical
      restartPolicy: Always
      serviceAccount: cilium
      serviceAccountName: cilium
      terminationGracePeriodSeconds: 1
      tolerations:
      - operator: Exists
      volumes:
        # To keep state between restarts / upgrades
      - hostPath:
          path: /var/run/cilium
          type: DirectoryOrCreate
        name: cilium-run
        # To keep state between restarts / upgrades for bpf maps
      - hostPath:
          path: /sys/fs/bpf
          type: DirectoryOrCreate
        name: bpf-maps
        # To read docker events from the node
      - hostPath:
          path: /var/run/docker.sock
          type: Socket
        name: docker-socket
        # To install cilium cni plugin in the host
      - hostPath:
          path: /opt/cni/bin
          type: DirectoryOrCreate
        name: cni-path
        # To install cilium cni configuration in the host
      - hostPath:
          path: /etc/cni/net.d
          type: DirectoryOrCreate
        name: etc-cni-netd
        # To read the etcd config stored in config maps
      - configMap:
          defaultMode: 420
          items:
          - key: etcd-config
            path: etcd.config
          name: cilium-config
        name: etcd-config-path
        # To read the k8s etcd secrets in case the user might want to use TLS
      - name: etcd-secrets
        secret:
          defaultMode: 420
          optional: true
          secretName: cilium-etcd-secrets
        # To read the clustermesh configuration
      - name: clustermesh-secrets
        secret:
          defaultMode: 420
          optional: true
          secretName: cilium-clustermesh
  updateStrategy:
    rollingUpdate:
      # Specifies the maximum number of Pods that can be unavailable during the update process.
      maxUnavailable: 2
    type: RollingUpdate
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  name: cilium-etcd-operator
  namespace: kube-system
rules:
- apiGroups:
  - etcd.database.coreos.com
  resources:
  - etcdclusters
  verbs:
  - get
  - delete
  - create
- apiGroups:
  - apiextensions.k8s.io
  resources:
  - customresourcedefinitions
  verbs:
  - delete
  - get
  - create
- apiGroups:
  - ""
  resources:
  - deployments
  verbs:
  - delete
  - create
  - get
  - update
- apiGroups:
  - ""
  resources:
  - pods
  verbs:
  - list
- apiGroups:
  - apps
  resources:
  - deployments
  verbs:
  - delete
  - create
  - get
  - update
- apiGroups:
  - ""
  resources:
  - componentstatuses
  verbs:
  - get
- apiGroups:
  - extensions
  resources:
  - deployments
  verbs:
  - delete
  - create
  - get
  - update
- apiGroups:
  - ""
  resources:
  - secrets
  verbs:
  - get
  - create
  - delete
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: cilium-etcd-operator
  namespace: kube-system
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: cilium-etcd-operator
subjects:
- kind: ServiceAccount
  name: cilium-etcd-operator
  namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  name: etcd-operator
  namespace: kube-system
rules:
- apiGroups:
  - etcd.database.coreos.com
  resources:
  - etcdclusters
  - etcdbackups
  - etcdrestores
  verbs:
  - '*'
- apiGroups:
  - apiextensions.k8s.io
  resources:
  - customresourcedefinitions
  verbs:
  - '*'
- apiGroups:
  - ""
  resources:
  - pods
  - services
  - endpoints
  - persistentvolumeclaims
  - events
  - deployments
  verbs:
  - '*'
- apiGroups:
  - apps
  resources:
  - deployments
  verbs:
  - '*'
- apiGroups:
  - extensions
  resources:
  - deployments
  verbs:
  - create
  - get
  - list
  - patch
  - update
- apiGroups:
  - ""
  resources:
  - secrets
  verbs:
  - get
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: etcd-operator
  namespace: kube-system
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: etcd-operator
subjects:
- kind: ServiceAccount
  name: cilium-etcd-sa
  namespace: kube-system
---
kind: ServiceAccount
apiVersion: v1
metadata:
  name: cilium-etcd-operator
  namespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: cilium-etcd-sa
  namespace: kube-system
---
apiVersion: apps/v1
kind: Deployment
metadata:
  labels:
    io.cilium/app: etcd-operator
    name: cilium-etcd-operator
  name: cilium-etcd-operator
  namespace: kube-system
spec:
  replicas: 1
  selector:
    matchLabels:
      io.cilium/app: etcd-operator
      name: cilium-etcd-operator
  strategy:
    rollingUpdate:
      maxSurge: 1
      maxUnavailable: 1
    type: RollingUpdate
  template:
    metadata:
      labels:
        io.cilium/app: etcd-operator
        name: cilium-etcd-operator
    spec:
      containers:
      - command:
        - /usr/bin/cilium-etcd-operator
        env:
        - name: CILIUM_ETCD_OPERATOR_CLUSTER_DOMAIN
          value: cluster.local
        - name: CILIUM_ETCD_OPERATOR_ETCD_CLUSTER_SIZE
          value: "3"
        - name: CILIUM_ETCD_OPERATOR_NAMESPACE
          valueFrom:
            fieldRef:
              apiVersion: v1
              fieldPath: metadata.namespace
        - name: CILIUM_ETCD_OPERATOR_POD_NAME
          valueFrom:
            fieldRef:
              apiVersion: v1
              fieldPath: metadata.name
        - name: CILIUM_ETCD_OPERATOR_POD_UID
          valueFrom:
            fieldRef:
              apiVersion: v1
              fieldPath: metadata.uid
        image: docker.io/cilium/cilium-etcd-operator:v2.0.4
        imagePullPolicy: IfNotPresent
        name: cilium-etcd-operator
      dnsPolicy: ClusterFirst
      hostNetwork: true
      priorityClassName: system-node-critical
      restartPolicy: Always
      serviceAccount: cilium-etcd-operator
      serviceAccountName: cilium-etcd-operator
      tolerations:
      - operator: Exists
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: cilium
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: cilium
subjects:
- kind: ServiceAccount
  name: cilium
  namespace: kube-system
- apiGroup: rbac.authorization.k8s.io
  kind: Group
  name: system:nodes
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  name: cilium
rules:
- apiGroups:
  - networking.k8s.io
  resources:
  - networkpolicies
  verbs:
  - get
  - list
  - watch
- apiGroups:
  - ""
  resources:
  - namespaces
  - services
  - nodes
  - endpoints
  - componentstatuses
  verbs:
  - get
  - list
  - watch
- apiGroups:
  - ""
  resources:
  - pods
  - nodes
  verbs:
  - get
  - list
  - watch
  - update
- apiGroups:
  - extensions
  resources:
  - ingresses
  verbs:
  - create
  - get
  - list
  - watch
- apiGroups:
  - apiextensions.k8s.io
  resources:
  - customresourcedefinitions
  verbs:
  - create
  - get
  - list
  - watch
  - update
- apiGroups:
  - cilium.io
  resources:
  - ciliumnetworkpolicies
  - ciliumnetworkpolicies/status
  - ciliumendpoints
  - ciliumendpoints/status
  verbs:
  - '*'
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: cilium
  namespace: kube-system