Bypass Windows 11 Upgrade Assistant / PC Health Check / TPM and CPU Settings. Ignore PC Health Check results.

README.md

Bypass Windows 11 Upgrade Assistant / Setup Hardware Checks (TPM, CPU, RAM)

This PowerShell script allows you to bypass TPM 2.0, unsupported CPU, and memory checks enforced by the Windows 11 Upgrade Assistant and setup.exe from Windows installation media. It eliminates common upgrade blocks such as:

• This PC doesn't currently meet Windows 11 system requirements.
• TPM 2.0 must be supported and enabled on this PC.
• The processor isn't currently supported for Windows 11.

What It Does

This script:

• Deletes legacy upgrade failure registry keys that may block future attempts.
• Simulates hardware compatibility by setting known override values (e.g., TPM, RAM, Secure Boot).
• Enables Microsoft's official upgrade bypass by setting AllowUpgradesWithUnsupportedTPMOrCPU to 1.
• Enables Upgrade Assistant to proceed by setting UpgradeEligibility to 1 under the current user.

Registry Keys Modified or Removed

Purpose	Registry Path	Action / Value
Clear upgrade failure flags	HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\CompatMarkers	Deleted (if exists)
	HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Shared	Deleted (if exists)
	HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\TargetVersionUpgradeExperienceIndicators	Deleted (if exists)
Simulate compatibility	HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\HwReqChk	HwReqChkVars = MultiString (TPM, RAM, etc.)
Bypass TPM/CPU check	HKLM\SYSTEM\Setup\MoSetup	AllowUpgradesWithUnsupportedTPMOrCPU = 1
Enable Upgrade Assistant flow	HKCU\Software\Microsoft\PCHC	UpgradeEligibility = 1

How to Use

Option 1: Save and Execute Locally

1. Save the script as: Windows11-Enable-Upgrade.ps1

2. Open PowerShell as Administrator.

3. Run the script:

.\Windows11-Enable-Upgrade.ps1

Option 2: Run Directly from the Web

1. Click the "Raw" button at the top right of the script to view it as plain text.

2. Copy the full Raw URL from your browser’s address bar.

3. In Administrator PowerShell, run:

irm "<paste raw url here>" | iex

✅ This lets you execute the script immediately without saving it to disk.

---

Disclaimer

This script is provided as-is with no warranties. Use only in test environments, labs, or situations where your device policy allows. Bypassing Windows hardware requirements may result in reduced support, compatibility issues, or failed future updates. Proceed at your own risk.

Windows11-Enable-Upgrade.ps1

<#
.SYNOPSIS
Bypasses Windows 11 hardware requirements for in-place upgrades.

.DESCRIPTION
This script modifies specific registry values to override system compatibility checks performed during
Windows 11 upgrades. It removes legacy upgrade failure entries, simulates compatible hardware state,
enables Microsoft's documented bypass policy for unsupported TPM or CPU configurations, and sets the
UpgradeEligibility flag required by the Windows 11 Upgrade Assistant.

This is intended for lab, evaluation, or controlled environments where hardware policy allows.

.NOTES
Author: asheroto
Source: https://gist.github.com/asheroto/5087d2a38b311b0c92be2a4f23f92d3e
Required: Run as Administrator

.LICENSE
Use at your own risk. No warranty expressed or implied.
#>

function Write-Section {
<#
.SYNOPSIS
Displays a section header with borders using Write-Host and optional color.

.DESCRIPTION
Prints multi-line text surrounded by a hash border for readability.
Supports output coloring via the Color parameter.

.PARAMETER Text
The text to display. Can include multiple lines.

.PARAMETER Color
(Optional) The color to use for the text and border. Defaults to White.

.EXAMPLE
Write-Section -Text "Starting Process"

.EXAMPLE
Write-Section -Text "Line 1`nLine 2" -Color Green
#>
    param (
        [Parameter(Mandatory)]
        [string]$Text,

        [string]$Color = "White"
    )

    $lines = $Text -split "`n"
    $maxLength = ($lines | Measure-Object -Property Length -Maximum).Maximum
    $border = "#" * ($maxLength + 4)

    Write-Host ""
    Write-Host $border -ForegroundColor $Color
    foreach ($line in $lines) {
        Write-Host ("# " + $line.PadRight($maxLength) + " #") -ForegroundColor $Color
    }
    Write-Host $border -ForegroundColor $Color
    Write-Host ""
}

function Set-RegistryValueForced {
    <#
.SYNOPSIS
Adds or updates a registry value with error handling.

.DESCRIPTION
Creates the specified registry key if it does not exist and sets the provided value.
Supports String, DWord, QWord, Binary, and MultiString types.
Outputs an error message if the operation fails.

.PARAMETER Path
The full registry path (e.g., HKLM:\Software\Example).

.PARAMETER Name
The name of the registry value to create or update.

.PARAMETER Type
The type of the registry value (String, DWord, QWord, Binary, MultiString).

.PARAMETER Value
The value to set. For MultiString, provide an array of strings.

.EXAMPLE
Set-RegistryValueForced -Path "HKLM:\Software\Test" -Name "TestValue" -Type String -Value "OK"

.EXAMPLE
Set-RegistryValueForced -Path "HKLM:\Software\Test" -Name "Flags" -Type DWord -Value 1
#>

    param (
        [string]$Path,
        [string]$Name,
        [string]$Type,
        [object]$Value
    )

    try {
        # Ensure the key exists
        if (-not (Test-Path -Path $Path)) {
            New-Item -Path $Path -Force | Out-Null
        }

        # Set the registry value
        Set-ItemProperty -Path $Path -Name $Name -Value $Value -Type $Type -Force
    } catch {
        Write-Output "Failed to set $Name in ${Path}: $($_.Exception.Message)"
    }
}

# Step 1: Clear old upgrade failure records
Write-Host "Step 1: Clearing old upgrade failure records..." -ForegroundColor Yellow
Remove-Item -Path "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\CompatMarkers" -Recurse -Force -ErrorAction SilentlyContinue
Remove-Item -Path "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Shared" -Recurse -Force -ErrorAction SilentlyContinue
Remove-Item -Path "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\TargetVersionUpgradeExperienceIndicators" -Recurse -Force -ErrorAction SilentlyContinue
Write-Host "Cleanup complete." -ForegroundColor Green

# Step 2: Simulating hardware compatibility
Write-Host "Step 2: Simulating hardware compatibility..." -ForegroundColor Yellow
Set-RegistryValueForced -Path "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\HwReqChk" -Name "HwReqChkVars" -Type MultiString -Value @(
    "SQ_SecureBootCapable=TRUE",
    "SQ_SecureBootEnabled=TRUE",
    "SQ_TpmVersion=2",
    "SQ_RamMB=8192"
)
Write-Host "Hardware compatibility values applied." -ForegroundColor Green

# Step 3: Allow upgrades on unsupported TPM or CPU
Write-Host "Step 3: Allowing upgrades on unsupported TPM or CPU..." -ForegroundColor Yellow
Set-RegistryValueForced -Path "HKLM:\SYSTEM\Setup\MoSetup" -Name "AllowUpgradesWithUnsupportedTPMOrCPU" -Type DWord -Value 1
Write-Host "Upgrade policy for unsupported hardware enabled." -ForegroundColor Green

# Step 4: Set Upgrade Eligibility flag in HKCU
Write-Host "Step 4: Setting upgrade eligibility flag..." -ForegroundColor Yellow
Set-RegistryValueForced -Path "HKCU:\Software\Microsoft\PCHC" -Name "UpgradeEligibility" -Type DWord -Value 1
Write-Host "Eligibility flag set." -ForegroundColor Green

# Done
Write-Section -Text "All operations completed successfully!`nYou can now upgrade using the Windows 11 Upgrade Assistant or setup.exe from installation media.`nNo restart required." -Color Cyan

I ran into black screen right after login on my laptop a few months back. I could move the mouse but nothing else loaded. Safe mode worked fine and that is how I started fixing it. I uninstalled the graphics driver from Device Manager and rebooted which allowed Windows to reinstall the default driver. That cleared the problem instantly and then I updated the driver from the manufacturer’s site. Another tip if it still happens is using Task Manager to restart Windows Explorer because many times the shell just fails to load. After locking down the drivers I also checked activation since missing updates can cause weird issues. I bought a license through Microsoftprokey and since then my updates run without interruptions. If your PC keeps showing black screens after login it is usually display driver or corrupted system file related.

@blinkblinktwo gotcha, sorry I didn't see that before. I'll work on implementing when I get a chance.

Your script worked Perfectly to prep and then Just downloaded and ran Create installation media for Windows 11 found > https://support.microsoft.com/en-us/windows/create-installation-media-for-windows-99a58364-8c02-206f-aa6f-40c3b507420d <<< Just used this in hopes it may not get cleaned out because of filers. >>> to create the USB stick needed for win 11 install. After flash sick created ne reboot required and just run the setup.exe from the flash stick and accepted any warnings about not going to supported but installed Win 11 and all seems windows 11 works well from there.

Some games still may not work because needing either TPM 2.0 or Secure boot, but not my problem as I do not have time for games anyway.

@blinkblinktwo gotcha, sorry I didn't see that before. I'll work on implementing when I get a chance.

No worries.
If it helps for reference, I just added a new function in the original script, and then modified step #4 with parameters to call it.

Thanks again, take care.

function Set-RegistryValueAllUsers {
    [CmdletBinding()]
    param (
        [Parameter(Mandatory=$true)]
        [string]$SubKey,   # e.g. "Software\Microsoft\PCHC"

        [Parameter(Mandatory=$true)]
        [string]$Name,     # e.g. "UpgradeEligibility"

        [Parameter(Mandatory=$true)]
        [ValidateSet("String","ExpandString","Binary","DWord","QWord","MultiString")]
        [string]$Type,     # e.g. "DWord"

        [Parameter(Mandatory=$true)]
        [object]$Value     # e.g. 1
    )

    # Path to desired user-type registry key
    $regSubKey = "Software\Microsoft\PCHC"
    $regName   = "UpgradeEligibility"
    $regType   = "DWORD"
    $regValue  = 1


    # Get all Windows "NTUSER.DAT" local user profiles registry hives (skip system account)
    $profiles = Get-CimInstance Win32_UserProfile | Where-Object {
        ($_.Special -eq $false) -and (Test-Path $_.LocalPath)
    }


    foreach ($profile in $profiles) {
        $sid  = $profile.SID
        $path = "$($profile.LocalPath)\NTUSER.DAT"


        if ($profile.Loaded) {
            # User reg hive is already mounted (user is logged in -- write value to path HKEY_USERS, no unmount!)
            $fullKeyPath = "Registry::HKEY_USERS\$sid\$regSubKey"

            if (-not (Test-Path $fullKeyPath)) {
                New-Item -Path $fullKeyPath -Force | Out-Null
            }

            New-ItemProperty -Path $fullKeyPath `
                             -Name $regName `
                             -PropertyType $regType `
                             -Value $regValue -Force | Out-Null

            Write-Host "Set for logged-IN user $($profile.LocalPath)"
        }


        else {
            # User reg hive is NOT loaded (load manually in HKEY_USERS, write value, then unmount!)
            Write-Host "Loading hive for logged-out user $($profile.LocalPath)"

            reg load "HKU\$sid" $path | Out-Null
            try {
                $fullKeyPath = "Registry::HKEY_USERS\$sid\$regSubKey"

                if (-not (Test-Path $fullKeyPath)) {
                    New-Item -Path $fullKeyPath -Force | Out-Null
                }

                New-ItemProperty -Path $fullKeyPath `
                                 -Name $regName `
                                 -PropertyType $regType `
                                 -Value $regValue -Force | Out-Null

                Write-Host "Set for logged-OUT user $($profile.LocalPath)"
            }


            finally {
                reg unload "HKU\$sid" | Out-Null
            }
    
        }

    }

}

# Step 4: Set Upgrade Eligibility flag in HKCU/HKEY_USER for ALL logged in and out local users.
Write-Host "Step 4: Setting upgrade eligibility flag..." -ForegroundColor Yellow
Set-RegistryValueAllUsers -SubKey "Software\Microsoft\PCHC" -Name "UpgradeEligibility" -Type DWord -Value 1
Write-Host "Eligibility flag set on ALL users." -ForegroundColor Green