Drums game

makehub

# Title 
Drums game
# Picture 
media: undefined
# Objective
Finally you're able to play drums without an actual drum set ... want to know how? .. follow the steps below
# Duration
1 hr
# Age Group
all
# Materials
## Makey Makey board
* description:SparkFun.com
* quantity:1
* price:
* link:

## USB cable
* description:undefined
* quantity:1
* price:undefined
* link:undefined

## Alligators
* description:undefined
* quantity:5
* price:undefined
* link:undefined

## Jumper cables
* description:undefined
* quantity:5
* price:undefined
* link:undefined

## computer connected to internet
* description:undefined
* quantity:1
* price:undefined
* link:undefined

## Aluminium Foil
* description:cut into squares
* quantity:5
* price:undefined
* link:undefined

# Steps
## Make sure that the makey makey board, serial port and the Arduino sketch are identified by the computer and ready to use.
media: 

notes: *Check this like to make sure it's ready to use.
https://www.sparkfun.com/tutorials/378

*also check the next link
https://www.sparkfun.com/tutorials/388

*Make sure you know the location of every file you unzipped.

## Open http://www.virtualdrumming.com/ then click "play free"
media: http://s24.postimg.org/s4o0q0u3p/image.jpg

notes: undefined

## Select the preferred drum set to play
media: http://s23.postimg.org/3mfc17ozv/image.jpg

notes: Try to memorize the key controllers because they will be used in programming the Makey Makey board.
http://s15.postimg.org/99nlgwzff/image.jpg

## Connect the Makey Makey Board to the computer via USB cable
media: http://makeymakey.com/howto/connect_USB.jpg

notes: Notice the lights on makey makey board are switching on and off for a while.

## Open the makey makey .ino file and activate the tab "Settings.h"
media: http://s18.postimg.org/ezihlr2w9/image.jpg

notes: *If you don't have the makey makey file go and check the second link in step 1.

## Make sure that you are choosing the right board name and the correct USB port
media: http://s3.postimg.org/645nhweg3/image.jpg

notes: Choosing Serial port: Tools > Serial Port > "chose the port where the makey makey is connected"

If you can't see the Makey Makey in the list, Go back to the second link in step:1.

## Scroll down until you reach the left side inputs section
media: http://s3.postimg.org/i7az5gpib/image.jpg

notes: undefined

## Change the letters in the file according to the key controllers in the drum set be replacing the letter in the file by the controller letter in the virtual drums window
media: undefined

notes: you can also modify the key controllers in the drums by clicking key settings above the drum set.

## After finishing customizing the controllers, Click Verify ..
media: http://s15.postimg.org/m1tsh8yfr/image.jpg

notes: Notice

## When verification process is finished successfully, Hit  Upload.
media: http://s3.postimg.org/6gjoeox0f/image.jpg

notes: undefined

## Cut the Aluminum foils into equal squares and connect them to the makey makey
media: https://lab-aids.com/assets/images/content/correlations/Aluminum_Foil,_pkg_square.jpg

notes: undefined

## Enjoy the game!
media: undefined

notes: undefined

# Notes
undefined

makehub.json

{"id":"8772583","user":"aymanzaki9191","description":"Drums game","urls":["undefined","http://s29.postimg.org/a7ur9ras7/image.jpg","http://s23.postimg.org/3mfc17ozv/image.jpg","undefined","http://s28.postimg.org/q6vhtpu8d/image.jpg","undefined","undefined","undefined","http://s15.postimg.org/m1tsh8yfr/image.jpg","http://s3.postimg.org/6gjoeox0f/image.jpg","undefined","undefined"],"raw":"# Title \nDrums game\n# Picture \nmedia: undefined\n# Objective\nFinally you're able to play drums without an actual drum set ... want to know how? .. follow the steps below\n# Duration\n1 hr\n# Age Group\nall\n# Materials\n## Makey Makey board\n* description:SparkFun.com\n* quantity:1\n* price:\n* link:\n\n## USB cable\n* description:undefined\n* quantity:1\n* price:undefined\n* link:undefined\n\n## Alligators\n* description:undefined\n* quantity:5\n* price:undefined\n* link:undefined\n\n## Jumper cables\n* description:undefined\n* quantity:5\n* price:undefined\n* link:undefined\n\n## computer connected to internet\n* description:undefined\n* quantity:1\n* price:undefined\n* link:undefined\n\n## Aluminium Foil\n* description:cut into squares\n* quantity:5\n* price:undefined\n* link:undefined\n\n# Steps\n## Make sure that the makey makey board, serial port and the Arduino sketch are identified by the computer and ready to use.\nmedia: \n\nnotes: *Check this like to make sure it's ready to use.\nhttps://www.sparkfun.com/tutorials/378\n\n*also check the next link\nhttps://www.sparkfun.com/tutorials/388\n\n*Make sure you know the location of every file you unzipped.\n\n## Open http://www.virtualdrumming.com/ then click \"play free\"\nmedia: http://s29.postimg.org/a7ur9ras7/image.jpg\n\nnotes: undefined\n\n## Select the preferred drum set to play\nmedia: http://s23.postimg.org/3mfc17ozv/image.jpg\n\nnotes: Try to memorize the key controllers because they will be used in programming the Makey Makey board.\nhttp://s15.postimg.org/99nlgwzff/image.jpg\n\n## Connect the Makey Makey Board to the computer via USB cable\nmedia: undefined\n\nnotes: Notice the lights on makey makey board are switching on and off for a while.\n\n## Open the makey makey .ino file and activate the tab \"Setting.h\"\nmedia: http://s28.postimg.org/q6vhtpu8d/image.jpg\n\nnotes: *If you don't have the makey makey file go and check the second link in step 1.\n\n## Make sure that you are choosing the right board name and the correct USB port\nmedia: undefined\n\nnotes: Choosing board: Tools > Board > Makey Makey\n\nChoosing Serial port: Tools > Serial Port > \"chose the port where the makey makey is connected\"\n\n## Scroll down until you reach the left side inputs section\nmedia: undefined\n\nnotes: undefined\n\n## Change the letters in the file according to the key controllers in the drum set be replacing the letter in the file by the controller letter in the virtual drums window\nmedia: undefined\n\nnotes: you can also modify the key controllers in the drums by clicking key settings above the drum set.\n\n## After finishing customizing the controllers, Click Verify ..\nmedia: http://s15.postimg.org/m1tsh8yfr/image.jpg\n\nnotes: Notice\n\n## When verification process is finished successfully, Hit  Upload.\nmedia: http://s3.postimg.org/6gjoeox0f/image.jpg\n\nnotes: undefined\n\n## Cut the Aluminum foils into equal squares and connect them to the makey makey\nmedia: undefined\n\nnotes: undefined\n\n## Enjoy the game!\nmedia: undefined\n\nnotes: undefined\n\n# Notes\nundefined\n","steps":[{"description":"Make sure that the makey makey board, serial port and the Arduino sketch are identified by the computer and ready to use.","media":"","$$hashKey":"008","notes":"*Check this like to make sure it's ready to use.\nhttps://www.sparkfun.com/tutorials/378\n\n*also check the next link\nhttps://www.sparkfun.com/tutorials/388\n\n*Make sure you know the location of every file you unzipped."},{"$$hashKey":"00K","description":"Open http://www.virtualdrumming.com/ then click \"play free\"","media":"http://s24.postimg.org/s4o0q0u3p/image.jpg"},{"$$hashKey":"00M","description":"Select the preferred drum set to play","media":"http://s23.postimg.org/3mfc17ozv/image.jpg","notes":"Try to memorize the key controllers because they will be used in programming the Makey Makey board.\nhttp://s15.postimg.org/99nlgwzff/image.jpg"},{"$$hashKey":"00O","description":"Connect the Makey Makey Board to the computer via USB cable","notes":"Notice the lights on makey makey board are switching on and off for a while.","media":"http://makeymakey.com/howto/connect_USB.jpg"},{"$$hashKey":"00Q","description":"Open the makey makey .ino file and activate the tab \"Settings.h\"","notes":"*If you don't have the makey makey file go and check the second link in step 1.","media":"http://s18.postimg.org/ezihlr2w9/image.jpg"},{"$$hashKey":"00U","description":"Make sure that you are choosing the right board name and the correct USB port","notes":"Choosing Serial port: Tools > Serial Port > \"chose the port where the makey makey is connected\"\n\nIf you can't see the Makey Makey in the list, Go back to the second link in step:1.","media":"http://s3.postimg.org/645nhweg3/image.jpg"},{"$$hashKey":"00W","description":"Scroll down until you reach the left side inputs section","media":"http://s3.postimg.org/i7az5gpib/image.jpg"},{"$$hashKey":"00Y","description":"Change the letters in the file according to the key controllers in the drum set be replacing the letter in the file by the controller letter in the virtual drums window","notes":"you can also modify the key controllers in the drums by clicking key settings above the drum set."},{"$$hashKey":"010","description":"After finishing customizing the controllers, Click Verify ..","media":"http://s15.postimg.org/m1tsh8yfr/image.jpg","notes":"Notice"},{"$$hashKey":"012","description":"When verification process is finished successfully, Hit  Upload.","media":"http://s3.postimg.org/6gjoeox0f/image.jpg"},{"$$hashKey":"014","description":"Cut the Aluminum foils into equal squares and connect them to the makey makey","media":"https://lab-aids.com/assets/images/content/correlations/Aluminum_Foil,_pkg_square.jpg"},{"$$hashKey":"016","description":"Enjoy the game!"}],"materials":[{"item":"Makey Makey board","description":"SparkFun.com","quantity":"1","price":"","link":"","$$hashKey":"006"},{"$$hashKey":"00A","item":"USB cable","quantity":"1"},{"$$hashKey":"00C","item":"Alligators","quantity":"5"},{"$$hashKey":"00E","item":"Jumper cables","quantity":"5"},{"$$hashKey":"00G","item":"computer connected to internet","quantity":"1"},{"$$hashKey":"00I","item":"Aluminium Foil","description":"cut into squares","quantity":"5"}],"title":"Drums game","objective":"Finally you're able to play drums without an actual drum set ... want to know how? .. follow the steps below","duration":"1 hr","ageGroup":"all","content":"<h1>Title</h1>\n\n<p>Drums game</p>\n\n<h1>Picture</h1>\n\n<p><img src='undefined'></p>\n\n<h1>Objective</h1>\n\n<p>Finally you're able to play drums without an actual drum set ... want to know how? .. follow the steps below</p>\n\n<h1>Duration</h1>\n\n<p>1 hr</p>\n\n<h1>Age Group</h1>\n\n<p>all</p>\n\n<h1>Materials</h1>\n\n<h2>Makey Makey board</h2>\n\n<ul>\n<li>description:SparkFun.com</li>\n<li>quantity:1</li>\n<li>price:</li>\n<li>link:</li>\n</ul>\n\n<h2>USB cable</h2>\n\n<ul>\n<li>description:undefined</li>\n<li>quantity:1</li>\n<li>price:undefined</li>\n<li>link:undefined</li>\n</ul>\n\n<h2>Alligators</h2>\n\n<ul>\n<li>description:undefined</li>\n<li>quantity:5</li>\n<li>price:undefined</li>\n<li>link:undefined</li>\n</ul>\n\n<h2>Jumper cables</h2>\n\n<ul>\n<li>description:undefined</li>\n<li>quantity:5</li>\n<li>price:undefined</li>\n<li>link:undefined</li>\n</ul>\n\n<h2>computer connected to internet</h2>\n\n<ul>\n<li>description:undefined</li>\n<li>quantity:1</li>\n<li>price:undefined</li>\n<li>link:undefined</li>\n</ul>\n\n<h2>Aluminium Foil</h2>\n\n<ul>\n<li>description:cut into squares</li>\n<li>quantity:5</li>\n<li>price:undefined</li>\n<li>link:undefined</li>\n</ul>\n\n<h1>Steps</h1>\n\n<h2>Make sure that the makey makey board, serial port and the Arduino sketch are identified by the computer and ready to use.</h2>\n\n<p><img src='https://s29.postimg.org/a7ur9ras7/image.jpg'></p>\n\n<p>notes: *Check this like to make sure it's ready to use.\n<a href=\"https://www.sparkfun.com/tutorials/378\">https://www.sparkfun.com/tutorials/378</a></p>\n\n<p>*also check the next link\n<a href=\"https://www.sparkfun.com/tutorials/388\">https://www.sparkfun.com/tutorials/388</a></p>\n\n<p>*Make sure you know the location of every file you unzipped.</p>\n\n<h2>Open <a href=\"http://www.virtualdrumming.com/\">http://www.virtualdrumming.com/</a> then click \"play free\"</h2>\n\n<p><img src='https://s23.postimg.org/3mfc17ozv/image.jpg'></p>\n\n<p>notes: undefined</p>\n\n<h2>Select the preferred drum set to play</h2>\n\n<p><img src='undefined'></p>\n\n<p>notes: Try to memorize the key controllers because they will be used in programming the Makey Makey board.\n<a href=\"http://s15.postimg.org/99nlgwzff/image.jpg\">http://s15.postimg.org/99nlgwzff/image.jpg</a></p>\n\n<h2>Connect the Makey Makey Board to the computer via USB cable</h2>\n\n<p><img src='https://s28.postimg.org/q6vhtpu8d/image.jpg'></p>\n\n<p>notes: Notice the lights on makey makey board are switching on and off for a while.</p>\n\n<h2>Open the makey makey .ino file and activate the tab \"Settings.h\"</h2>\n\n<p><img src='undefined'></p>\n\n<p>notes: *If you don't have the makey makey file go and check the second link in step 1.</p>\n\n<h2>Make sure that you are choosing the right board name and the correct USB port</h2>\n\n<p><img src='undefined'></p>\n\n<p>notes: Choosing Serial port: Tools > Serial Port > \"chose the port where the makey makey is connected\"</p>\n\n<p>If you can't see the Makey Makey in the list, Go back to the second link in step:1.</p>\n\n<h2>Scroll down until you reach the left side inputs section</h2>\n\n<p><img src='undefined'></p>\n\n<p>notes: undefined</p>\n\n<h2>Change the letters in the file according to the key controllers in the drum set be replacing the letter in the file by the controller letter in the virtual drums window</h2>\n\n<p><img src='https://s15.postimg.org/m1tsh8yfr/image.jpg'></p>\n\n<p>notes: you can also modify the key controllers in the drums by clicking key settings above the drum set.</p>\n\n<h2>After finishing customizing the controllers, Click Verify ..</h2>\n\n<p><img src='https://s3.postimg.org/6gjoeox0f/image.jpg'></p>\n\n<p>notes: Notice</p>\n\n<h2>When verification process is finished successfully, Hit  Upload.</h2>\n\n<p><img src='undefined'></p>\n\n<p>notes: undefined</p>\n\n<h2>Cut the Aluminum foils into equal squares and connect them to the makey makey</h2>\n\n<p><img src='undefined'></p>\n\n<p>notes: undefined</p>\n\n<h2>Enjoy the game!</h2>\n\n<p>{{12}}</p>\n\n<p>notes: undefined</p>\n\n<h1>Notes</h1>\n\n<p>undefined</p>","ownedByMe":"true"}