Skip to content

Instantly share code, notes, and snippets.

@bLd75

bLd75/tlp_test.log Secret

Created September 21, 2021 16:44
Show Gist options
  • Save bLd75/26c2380d6c591b6ae65eaf4e18d62198 to your computer and use it in GitHub Desktop.
Save bLd75/26c2380d6c591b6ae65eaf4e18d62198 to your computer and use it in GitHub Desktop.
Download ZIP
tlp_test.log
Raw
tlp_test.log
$ sudo tlp-stat -s -c -b
--- TLP 1.4.0-beta.2 --------------------------------------------
+++ Configured Settings:
defaults.conf L0004: TLP_ENABLE="1"
defaults.conf L0005: TLP_WARN_LEVEL="3"
defaults.conf L0006: TLP_PERSISTENT_DEFAULT="0"
defaults.conf L0007: DISK_IDLE_SECS_ON_AC="0"
defaults.conf L0008: DISK_IDLE_SECS_ON_BAT="2"
defaults.conf L0009: MAX_LOST_WORK_SECS_ON_AC="15"
defaults.conf L0010: MAX_LOST_WORK_SECS_ON_BAT="60"
defaults.conf L0011: CPU_ENERGY_PERF_POLICY_ON_AC="balance_performance"
defaults.conf L0012: CPU_ENERGY_PERF_POLICY_ON_BAT="balance_power"
defaults.conf L0013: SCHED_POWERSAVE_ON_AC="0"
defaults.conf L0014: SCHED_POWERSAVE_ON_BAT="1"
defaults.conf L0015: NMI_WATCHDOG="0"
defaults.conf L0016: DISK_DEVICES="nvme0n1 sda"
defaults.conf L0017: DISK_APM_LEVEL_ON_AC="254 254"
defaults.conf L0018: DISK_APM_LEVEL_ON_BAT="128 128"
defaults.conf L0019: DISK_APM_CLASS_DENYLIST="usb ieee1394"
defaults.conf L0020: DISK_IOSCHED="keep keep"
defaults.conf L0021: SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
defaults.conf L0022: SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
defaults.conf L0023: AHCI_RUNTIME_PM_ON_AC="on"
defaults.conf L0024: AHCI_RUNTIME_PM_ON_BAT="auto"
defaults.conf L0025: AHCI_RUNTIME_PM_TIMEOUT="15"
defaults.conf L0026: PCIE_ASPM_ON_AC="default"
defaults.conf L0027: PCIE_ASPM_ON_BAT="default"
defaults.conf L0028: RADEON_DPM_PERF_LEVEL_ON_AC="auto"
defaults.conf L0029: RADEON_DPM_PERF_LEVEL_ON_BAT="auto"
defaults.conf L0030: RADEON_POWER_PROFILE_ON_AC="default"
defaults.conf L0031: RADEON_POWER_PROFILE_ON_BAT="default"
defaults.conf L0032: WIFI_PWR_ON_AC="off"
defaults.conf L0033: WIFI_PWR_ON_BAT="on"
defaults.conf L0034: WOL_DISABLE="Y"
defaults.conf L0035: SOUND_POWER_SAVE_ON_AC="1"
defaults.conf L0036: SOUND_POWER_SAVE_ON_BAT="1"
defaults.conf L0037: SOUND_POWER_SAVE_CONTROLLER="Y"
defaults.conf L0038: BAY_POWEROFF_ON_AC="0"
defaults.conf L0039: BAY_POWEROFF_ON_BAT="0"
defaults.conf L0040: BAY_DEVICE="sr0"
defaults.conf L0041: RUNTIME_PM_ON_AC="on"
defaults.conf L0042: RUNTIME_PM_ON_BAT="auto"
defaults.conf L0043: RUNTIME_PM_DRIVER_DENYLIST="mei_me nouveau radeon"
defaults.conf L0044: USB_AUTOSUSPEND="1"
defaults.conf L0045: USB_EXCLUDE_AUDIO="1"
defaults.conf L0046: USB_EXCLUDE_BTUSB="0"
defaults.conf L0047: USB_EXCLUDE_PHONE="0"
defaults.conf L0048: USB_EXCLUDE_PRINTER="1"
defaults.conf L0049: USB_EXCLUDE_WWAN="0"
defaults.conf L0050: USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN="0"
defaults.conf L0051: RESTORE_DEVICE_STATE_ON_STARTUP="0"
defaults.conf L0052: RESTORE_THRESHOLDS_ON_BAT="0"
defaults.conf L0053: NATACPI_ENABLE="1"
defaults.conf L0054: TPACPI_ENABLE="1"
defaults.conf L0055: TPSMAPI_ENABLE="1"
/etc/tlp.conf L0551: STOP_CHARGE_THRESH_BAT0="1"
+++ System Info
System = LENOVO Legion Y540-15IRH 81SX
BIOS = BHCN42WW
OS Release = Debian GNU/Linux 11 (bullseye)
Kernel = 5.10.0-8-amd64 #1 SMP Debian 5.10.46-4 (2021-08-03) x86_64
/proc/cmdline = BOOT_IMAGE=/vmlinuz-5.10.0-8-amd64 root=/dev/mapper/vg-root ro
Init system = systemd v247 (247.3-6)
Boot mode = UEFI
+++ TLP Status
State = enabled
RDW state = enabled
Last run = 18:39:11, 38 sec(s) ago
Mode = AC
Power source = AC
+++ Battery Care
Plugin: lenovo
Supported features: charge threshold
Driver usage:
* vendor (ideapad_laptop) = active (charge threshold)
Parameter value range:
* STOP_CHARGE_THRESH_BAT0: 0(off), 1(on) -- battery conservation mode
/sys/bus/platform/drivers/ideapad_acpi/VPC2004:00/conservation_mode = 1 (60%)
+++ Battery Status: BAT0
/sys/class/power_supply/BAT0/manufacturer = SMP
/sys/class/power_supply/BAT0/model_name = L17M3PG2
/sys/class/power_supply/BAT0/cycle_count = 25
/sys/class/power_supply/BAT0/energy_full_design = 57000 [mWh]
/sys/class/power_supply/BAT0/energy_full = 56630 [mWh]
/sys/class/power_supply/BAT0/energy_now = 47570 [mWh]
/sys/class/power_supply/BAT0/power_now = 0 [mW]
/sys/class/power_supply/BAT0/status = Idle
Charge = 84.0 [%]
Capacity = 99.4 [%]
$ sudo tlp-stat -b
--- TLP 1.4.0-beta.2 --------------------------------------------
+++ Battery Care
Plugin: lenovo
Supported features: charge threshold
Driver usage:
* vendor (ideapad_laptop) = active (charge threshold)
Parameter value range:
* STOP_CHARGE_THRESH_BAT0: 0(off), 1(on) -- battery conservation mode
/sys/bus/platform/drivers/ideapad_acpi/VPC2004:00/conservation_mode = 1 (60%)
+++ Battery Status: BAT0
/sys/class/power_supply/BAT0/manufacturer = SMP
/sys/class/power_supply/BAT0/model_name = L17M3PG2
/sys/class/power_supply/BAT0/cycle_count = 25
/sys/class/power_supply/BAT0/energy_full_design = 57000 [mWh]
/sys/class/power_supply/BAT0/energy_full = 56630 [mWh]
/sys/class/power_supply/BAT0/energy_now = 47570 [mWh]
/sys/class/power_supply/BAT0/power_now = 0 [mW]
/sys/class/power_supply/BAT0/status = Idle
Charge = 84.0 [%]
Capacity = 99.4 [%]
$ sudo tlp fullcharge
Setting temporary charge threshold for all batteries:
conservation mode = 0
Charging starts now, keep AC connected.
$ sudo tlp-stat -b
--- TLP 1.4.0-beta.2 --------------------------------------------
+++ Battery Care
Plugin: lenovo
Supported features: charge threshold
Driver usage:
* vendor (ideapad_laptop) = active (charge threshold)
Parameter value range:
* STOP_CHARGE_THRESH_BAT0: 0(off), 1(on) -- battery conservation mode
/sys/bus/platform/drivers/ideapad_acpi/VPC2004:00/conservation_mode = 0 (100%)
+++ Battery Status: BAT0
/sys/class/power_supply/BAT0/manufacturer = SMP
/sys/class/power_supply/BAT0/model_name = L17M3PG2
/sys/class/power_supply/BAT0/cycle_count = 25
/sys/class/power_supply/BAT0/energy_full_design = 57000 [mWh]
/sys/class/power_supply/BAT0/energy_full = 56630 [mWh]
/sys/class/power_supply/BAT0/energy_now = 48710 [mWh]
/sys/class/power_supply/BAT0/power_now = 31131 [mW]
/sys/class/power_supply/BAT0/status = Charging
Charge = 86.0 [%]
Capacity = 99.4 [%]
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment