DMSG output for SGX

out.txt

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13-bone18.1 (bakercp@ubuntu64) (gcc version 4.7.2 20120731 (prerelease) (crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08) ) #1 SMP Tue May 21 21:40:08 CDT 2013
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 130816
[    0.000000] free_area_init_node: node 0, pgdat c0965940, node_mem_map c09df000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 129792 pages, LIFO batch:31
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 9 pages/cpu @c0dee000 s14080 r8192 d14592 u36864
[    0.000000] pcpu-alloc: s14080 r8192 d14592 u36864 alloc=9*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129792
[    0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc ip=
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 1048576 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 511MB = 511MB total
[    0.000000] Memory: 504852k/504852k available, 19436k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc089d128   (8789 kB)
[    0.000000]       .init : 0xc089e000 - 0xc08e6700   ( 290 kB)
[    0.000000]       .data : 0xc08e8000 - 0xc0968770   ( 514 kB)
[    0.000000]        .bss : 0xc0968770 - 0xc09de7fc   ( 473 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]   RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000389] Calibrating delay loop... 363.67 BogoMIPS (lpj=354304)
[    0.017380] pid_max: default: 32768 minimum: 301
[    0.017630] Security Framework initialized
[    0.017731] Mount-cache hash table entries: 512
[    0.027316] Initializing cgroup subsys cpuacct
[    0.027358] Initializing cgroup subsys memory
[    0.027427] Initializing cgroup subsys blkio
[    0.027579] CPU: Testing write buffer coherency: ok
[    0.028167] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.028246] Setting up static identity map for 0x805f1cf0 - 0x805f1d48
[    0.029932] Brought up 1 CPUs
[    0.029958] SMP: Total of 1 processors activated (363.67 BogoMIPS).
[    0.031413] devtmpfs: initialized
[    0.095564] pinctrl core: initialized pinctrl subsystem
[    0.095815] rstctl core: initialized rstctl subsystem
[    0.096328] regulator-dummy: no parameters
[    0.096889] NET: Registered protocol family 16
[    0.097859] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.107829] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.108620] platform 49000000.edma: alias fck already exists
[    0.108651] platform 49000000.edma: alias fck already exists
[    0.108676] platform 49000000.edma: alias fck already exists
[    0.109919] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.110095] OMAP GPIO hardware version 0.1
[    0.111591] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.112855] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.114215] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.114706] of_get_named_gpio_flags exited with status 52
[    0.114736] gpio-rctrl rstctl.3: loaded OK
[    0.120410] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.122591] cpsw.0: No hwaddr in dt. Using c8:a0:30:c0:5d:1e from efuse
[    0.122627] cpsw.1: No hwaddr in dt. Using c8:a0:30:c0:5d:20 from efuse
[    0.136767] bio: create slab <bio-0> at 0
[    0.148621] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.148862] of_get_named_gpio_flags: can't parse gpios property
[    0.149094] vmmcsd_fixed: 3300 mV 
[    0.152042] SCSI subsystem initialized
[    0.152524] usbcore: registered new interface driver usbfs
[    0.152650] usbcore: registered new interface driver hub
[    0.152972] usbcore: registered new device driver usb
[    0.155147] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    0.157567] DCDC1: at 1500 mV 
[    0.158819] vdd_mpu: 925 <--> 1325 mV at 1275 mV 
[    0.160046] vdd_core: 925 <--> 1150 mV at 1100 mV 
[    0.161170] LDO1: at 1800 mV 
[    0.162289] LDO2: at 3300 mV 
[    0.164289] LDO3: 1800 mV 
[    0.165403] LDO4: at 3300 mV 
[    0.166463] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[    0.167264] omap_i2c 44e0b000.i2c: unable to select pin group
[    0.168147] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[    0.170752] omap_i2c 4819c000.i2c: unable to select pin group
[    0.170995] media: Linux media interface: v0.10
[    0.171101] Linux video capture interface: v2.00
[    0.171949] Advanced Linux Sound Architecture Driver Initialized.
[    0.172961] NetLabel: Initializing
[    0.172981] NetLabel:  domain hash size = 128
[    0.172993] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.173115] NetLabel:  unlabeled traffic allowed by default
[    0.173455] Switching to clocksource gp_timer
[    0.229199] NET: Registered protocol family 2
[    0.230401] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.230546] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[    0.230714] TCP: Hash tables configured (established 4096 bind 4096)
[    0.230818] TCP: reno registered
[    0.230846] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.230892] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.231324] NET: Registered protocol family 1
[    0.231977] RPC: Registered named UNIX socket transport module.
[    0.231998] RPC: Registered udp transport module.
[    0.232011] RPC: Registered tcp transport module.
[    0.232024] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.232523] Trying to unpack rootfs image as initramfs...
[    0.552077] Freeing initrd memory: 2648K
[    0.552972] CPU PMU: probing PMU on CPU 0
[    0.553009] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    0.553606] omap2_mbox_probe: platform not supported
[    0.824961] VFS: Disk quotas dquot_6.5.2
[    0.825221] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.826631] NFS: Registering the id_resolver key type
[    0.826743] Key type id_resolver registered
[    0.826760] Key type id_legacy registered
[    0.826830] fuse init (API version 7.20)
[    0.827713] Btrfs loaded
[    0.828032] msgmni has been set to 991
[    0.831071] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.831096] io scheduler noop registered
[    0.831110] io scheduler deadline registered
[    0.831163] io scheduler cfq registered (default)
[    0.832996] tps65217-bl tps65217-bl: no platform data provided
[    0.833043] tps65217-bl: probe of tps65217-bl failed with error -22
[    0.833999] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.836594] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    0.836930] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    1.554253] console [ttyO0] enabled
[    1.559061] [drm] Initialized drm 1.1.0 20060810
[    1.577616] brd: module loaded
[    1.588021] loop: module loaded
[    1.591489] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    1.598801] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    1.606102] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    1.613396] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    1.620689] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    1.634792] bone-capemgr bone_capemgr.9: Baseboard: 'A335BNLT,0A5A,1613BBBK1485'
[    1.642599] bone-capemgr bone_capemgr.9: compatible-baseboard=ti,beaglebone-black
[    1.681402] bone-capemgr bone_capemgr.9: slot #0: No cape found
[    1.718507] bone-capemgr bone_capemgr.9: slot #1: No cape found
[    1.755615] bone-capemgr bone_capemgr.9: slot #2: No cape found
[    1.792725] bone-capemgr bone_capemgr.9: slot #3: No cape found
[    1.799006] bone-capemgr bone_capemgr.9: slot #4: specific override
[    1.805628] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 4
[    1.813678] bone-capemgr bone_capemgr.9: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G'
[    1.823853] bone-capemgr bone_capemgr.9: slot #5: specific override
[    1.830471] bone-capemgr bone_capemgr.9: bone: Using override eeprom data at slot 5
[    1.838523] bone-capemgr bone_capemgr.9: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI'
[    1.849004] bone-capemgr bone_capemgr.9: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    1.857905] bone-capemgr bone_capemgr.9: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    1.866727] bone-capemgr bone_capemgr.9: initialized OK.
[    1.872345] bone-capemgr bone_capemgr.9: loader: before slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    1.881123] bone-capemgr bone_capemgr.9: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    1.891823] OneNAND driver initializing
[    1.897349] usbcore: registered new interface driver cdc_ether
[    1.903546] bone-capemgr bone_capemgr.9: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    1.912420] usbcore: registered new interface driver rndis_host
[    1.918735] bone-capemgr bone_capemgr.9: loader: after slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    1.927566] usbcore: registered new interface driver cdc_ncm
[    1.933560] bone-capemgr bone_capemgr.9: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' for board-name 'Bone-LT-eMMC-2G', version '00A0'
[    1.947877] Initializing USB Mass Storage driver...
[    1.953188] usbcore: registered new interface driver usb-storage
[    1.959513] USB Mass Storage support registered.
[    1.964416] bone-capemgr bone_capemgr.9: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; converting to live tree
[    1.975165] bone-capemgr bone_capemgr.9: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.dtbo' for board-name 'Bone-Black-HDMI', version '00A0'
[    1.989486] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    1.996127] bone-capemgr bone_capemgr.9: slot #4: #2 overlays
[    2.002928] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    2.008214] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:462 dsps_musb_init: OK
[    2.017357] bone-capemgr bone_capemgr.9: slot #4: Applied #2 overlays.
[    2.024238] bone-capemgr bone_capemgr.9: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
[    2.032961] bone-capemgr bone_capemgr.9: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; converting to live tree
[    2.044249] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.044270] musb-hdrc: MHDRC RTL version 2.0 
[    2.044285] musb-hdrc: setup fifo_mode 4
[    2.044312] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.044461] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    2.049523] musb-hdrc musb-hdrc.0.auto: *** power=250
[    2.055818] bone-capemgr bone_capemgr.9: slot #5: #4 overlays
[    2.064977] platform 4830e000.fb: alias fck already exists
[    2.070985] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    2.076266] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:462 dsps_musb_init: OK
[    2.085101] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.085121] musb-hdrc: MHDRC RTL version 2.0 
[    2.085134] musb-hdrc: setup fifo_mode 4
[    2.085159] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.085304] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    2.090383] musb-hdrc musb-hdrc.1.auto: *** power=250
[    2.095710] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    2.103743] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    2.112347] bone-capemgr bone_capemgr.9: slot #5: Applied #4 overlays.
[    2.119252] bone-capemgr bone_capemgr.9: loader: done slot-5 BB-BONELT-HDMI:00A0 (prio 1)
[    2.127885] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    2.128008] usb usb1: default language 0x0409
[    2.128066] usb usb1: udev 1, busnum 1, minor = 0
[    2.128088] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.135242] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.142833] usb usb1: Product: MUSB HDRC host driver
[    2.148061] usb usb1: Manufacturer: Linux 3.8.13-bone18.1 musb-hcd
[    2.154563] usb usb1: SerialNumber: musb-hdrc.1.auto
[    2.160745] usb usb1: usb_probe_device
[    2.160774] usb usb1: configuration #1 chosen from 1 choice
[    2.160848] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    2.161059] hub 1-0:1.0: usb_probe_interface
[    2.161081] hub 1-0:1.0: usb_probe_interface - got id
[    2.161111] hub 1-0:1.0: USB hub found
[    2.165183] hub 1-0:1.0: 1 port detected
[    2.169371] hub 1-0:1.0: standalone hub
[    2.169390] hub 1-0:1.0: individual port power switching
[    2.169408] hub 1-0:1.0: no over-current protection
[    2.169424] hub 1-0:1.0: Single TT
[    2.169443] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    2.169461] hub 1-0:1.0: power on to power good time: 10ms
[    2.169505] hub 1-0:1.0: local power source is good
[    2.169698] hub 1-0:1.0: enabling power on all ports
[    2.170947] mousedev: PS/2 mouse device common for all mice
[    2.179099] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    2.186663] 44e3e000.rtc: already running
[    2.191250] i2c /dev entries driver
[    2.196337] Driver for 1-wire Dallas network protocol.
[    2.203350] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    2.211005] cpuidle: using governor ladder
[    2.215344] cpuidle: using governor menu
[    2.219867] of_get_named_gpio_flags: can't parse gpios property
[    2.219887] of_get_named_gpio_flags: can't parse gpios property
[    2.219901] of_get_named_gpio_flags: can't parse gpios property
[    2.219936] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    2.227194] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    2.233639] omap_hsmmc mmc.4: unable to select pin group
[    2.239511] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    2.246743] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    2.254105] mmc.4 supply vmmc_aux not found, using dummy regulator
[    2.260786] omap_hsmmc mmc.4: pins are not configured from the driver
[    2.271406] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    2.271491] hub 1-0:1.0: hub_suspend
[    2.271535] usb usb1: bus auto-suspend, wakeup 1
[    2.294858] of_get_named_gpio_flags: can't parse gpios property
[    2.294880] of_get_named_gpio_flags: can't parse gpios property
[    2.294895] of_get_named_gpio_flags: can't parse gpios property
[    2.294946] gpio-rctrl rstctl.3: gpio_rctrl_request eMMC_RSTn
[    2.301194] omap_hsmmc mmc.5: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn
[    2.309123] gpio-rctrl rstctl.3: gpio_rctrl_deassert eMMC_RSTn
[    2.315616] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
[    2.322803] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
[    2.330407] mmc.5 supply vmmc_aux not found, using dummy regulator
[    2.337079] omap_hsmmc mmc.5: pins are not configured from the driver
[    2.371582] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
[    2.383301] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22
[    2.390637] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[    2.399645] leds-gpio gpio-leds.8: pins are not configured from the driver
[    2.406924] of_get_named_gpio_flags exited with status 53
[    2.406947] of_get_named_gpio_flags exited with status 54
[    2.406967] of_get_named_gpio_flags exited with status 55
[    2.406987] of_get_named_gpio_flags exited with status 56
[    2.407043] of_get_named_gpio_flags exited with status 53
[    2.407281] of_get_named_gpio_flags exited with status 54
[    2.407544] of_get_named_gpio_flags exited with status 55
[    2.407723] of_get_named_gpio_flags exited with status 56
[    2.408306] ledtrig-cpu: registered to indicate activity on CPUs
[    2.415203] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    2.422539] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    2.431072] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    2.437563] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    2.444773] mmc0: host does not support reading read-only switch. assuming write-enable.
[    2.453433] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    2.461749] usbcore: registered new interface driver usbhid
[    2.467716] usbhid: USB HID core driver
[    2.471834] mmc0: new high speed SDHC card at address aaaa
[    2.480525] of_get_named_gpio_flags exited with status 59
[    2.482725] davinci_evm sound.13:  nxp-hdmi-hifi <-> 48038000.mcasp mapping ok
[    2.490475] mmcblk0: mmc0:aaaa SU16G 14.8 GiB 
[    2.497718]  mmcblk0: p1 p2
[    2.504474] TCP: cubic registered
[    2.508539] NET: Registered protocol family 10
[    2.514766] NET: Registered protocol family 17
[    2.519999] Key type dns_resolver registered
[    2.524837] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    2.533015] ThumbEE CPU extension supported.
[    2.537587] Registering SWP/SWPB emulation handler
[    2.544036] registered taskstats version 1
[    2.551481] of_get_named_gpio_flags: can't parse gpios property
[    2.551517] tilcdc 4830e000.fb: No power control GPIO
[    2.556983] usb usb1: usb wakeup-resume
[    2.557039] usb usb1: usb auto-resume
[    2.557070] hub 1-0:1.0: hub_resume
[    2.557132] hub 1-0:1.0: port 1: status 0301 change 0001
[    2.591251] mmc1: BKOPS_EN bit is not set
[    2.598162] mmc1: new high speed MMC card at address 0001
[    2.604742] mmcblk1: mmc1:0001 MMC02G 1.78 GiB 
[    2.610054] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
[    2.616684] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
[    2.625727]  mmcblk1: unknown partition table
[    2.632746]  mmcblk1boot1: unknown partition table
[    2.640028]  mmcblk1boot0: unknown partition table
[    2.660009] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[    2.660083] hub 1-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
[    2.678705] tilcdc 4830e000.fb: found TDA19988
[    2.684198] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.691162] [drm] No driver support for vblank timestamp query.
[    2.765447] usb 1-1: new low-speed USB device number 2 using musb-hdrc
[    2.808353] tilcdc 4830e000.fb: Connected to an HDMI monitor with cea mode 2
[    2.836277] Console: switching to colour frame buffer device 160x45
[    2.869183] tilcdc 4830e000.fb: fb0:  frame buffer device
[    2.874890] tilcdc 4830e000.fb: registered panic notifier
[    2.880685] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[    2.905943] usb 1-1: skipped 1 descriptor after interface
[    2.906029] usb 1-1: skipped 1 descriptor after interface
[    2.906528] usb 1-1: default language 0x0409
[    2.908972] usb 1-1: udev 2, busnum 1, minor = 1
[    2.908997] usb 1-1: New USB device found, idVendor=04d9, idProduct=2519
[    2.916058] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.923555] usb 1-1: Product: 2.4GHz receiver 
[    2.928238] usb 1-1: Manufacturer: Shenzhen LogoTech 
[    2.934165] usb 1-1: usb_probe_device
[    2.934194] usb 1-1: configuration #1 chosen from 1 choice
[    2.934609] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[    2.934878] usbhid 1-1:1.0: usb_probe_interface
[    2.934902] usbhid 1-1:1.0: usb_probe_interface - got id
[    2.937281] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    2.943718] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    2.952491] input: Shenzhen LogoTech  2.4GHz receiver  as /devices/ocp.2/47400000.usb/musb-hdrc.1.auto/usb1/1-1/1-1:1.0/input/input0
[    2.975030] hid-generic 0003:04D9:2519.0001: input: USB HID v1.00 Keyboard [Shenzhen LogoTech  2.4GHz receiver ] on usb-musb-hdrc.1.auto-1/input0
[    2.990392] libphy: 4a101000.mdio: probed
[    2.994673] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    3.009719] usb 1-1: adding 1-1:1.1 (config #1, interface 1)
[    3.010032] usbhid 1-1:1.1: usb_probe_interface
[    3.010064] usbhid 1-1:1.1: usb_probe_interface - got id
[    3.004608] Detected MACID = c8:a0:30:c0:5d:1e
[    3.010448] cpsw 4a100000.ethernet: NAPI disabled
[    3.017847] omap_rtc 44e3e000.rtc: setting system clock to 2013-05-22 04:23:07 UTC (1369196587)
[    3.030493] input: Shenzhen LogoTech  2.4GHz receiver  as /devices/ocp.2/47400000.usb/musb-hdrc.1.auto/usb1/1-1/1-1:1.1/input/input1
[    3.045810] hid-generic 0003:04D9:2519.0002: input: USB HID v1.00 Mouse [Shenzhen LogoTech  2.4GHz receiver ] on usb-musb-hdrc.1.auto-1/input1
[    3.059520] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[    3.059559] hub 1-0:1.0: port 1 enable change, status 00000303
[    3.095467] tilcdc 4830e000.fb: timeout waiting for framedone
[    3.109312] ALSA device list:
[    3.112452]   #0: TI BeagleBone Black
[    3.117094] Freeing init memory: 288K
[    3.213466] udevd[101]: starting version 175
[    4.749859] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    5.957501] init: ureadahead main process (226) terminated with status 5
[    6.799010] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[    7.430642] udevd[323]: starting version 175
[    9.328727] init: plymouth main process (230) killed by ABRT signal
[    9.333459] init: plymouth-splash main process (401) terminated with status 2
[    9.643756] net eth0: initializing cpsw version 1.12 (0)
[    9.647579] net eth0: phy found : id is : 0x7c0f1
[    9.647615] libphy: PHY 4a101000.mdio:01 not found
[    9.652777] net eth0: phy 4a101000.mdio:01 not found on slave 1
[    9.678089] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.724947] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[   12.725017] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   14.302300] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[   14.311044] pgd = df788000
[   14.313961] [00000000] *pgd=00000000
[   14.317800] Internal error: Oops: 5 [#1] SMP ARM
[   14.322650] Modules linked in: omaplfb(O+) pvrsrvkm(O)
[   14.328094] CPU: 0    Tainted: G           O  (3.8.13-bone18.1 #1)
[   14.334817] PC is at AllocateDeviceID+0x0/0x48 [pvrsrvkm]
[   14.340587] LR is at PVRSRVRegisterDCDeviceKM+0xf0/0x178 [pvrsrvkm]
[   14.347171] pc : [<bf0063e8>]    lr : [<bf0026ac>]    psr: 40000013
[   14.347171] sp : df4a9e18  ip : 00000000  fp : 0000001c
[   14.359204] r10: 00000000  r9 : 00000000  r8 : 001c2000
[   14.364688] r7 : de15e898  r6 : 00000000  r5 : de15e804  r4 : 00000000
[   14.371536] r3 : de1171c0  r2 : 00000001  r1 : de1171c8  r0 : 00000000
[   14.378387] Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[   14.385873] Control: 10c5387d  Table: 9f788019  DAC: 00000015
[   14.391905] Process modprobe (pid: 664, stack limit = 0xdf4a8240)
[   14.398298] Stack: (0xdf4a9e18 to 0xdf4aa000)
[   14.425696] 9e00:                                                       de3e74c0 de1171c0
[   14.443342] 9e20: 00000032 de15e800 00000000 00000000 001c2000 bf03ac64 c009d364 60000013
[   14.476579] 9e40: c0928ff4 ffffffff bf03bccc bf03bccc df4a9f58 00000000 00000001 bf03bd14
[   14.496091] 9e60: bf03e000 bf03e008 df4a8000 c0008890 bf03e000 00000000 00000001 bf03bccc
[   14.516332] 9e80: bf03bccc df4a9f58 00000000 00000001 bf03bd14 00000001 de1b8f00 c0089f20
[   14.525193] 9ea0: bf03bcd8 00007fff c0085e30 00000010 c0087418 00000028 00000000 bf03bcd8
[   14.533869] 9ec0: bf03be20 000000c5 c05f84ac e08fc170 df4a9eec b6f5bfa8 20000013 c083c6dc
[   14.542536] 9ee0: df4a9f1c c05ed718 e08fe000 b6e49000 00000a29 00000000 00000000 00000000
[   14.554682] 9f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   14.576178] 9f20: 00000000 00000000 00000000 00000000 000000d2 b6e41000 00008aa9 b6f5bfa8
[   14.601542] 9f40: 00000080 c000daa4 df4a8000 00000000 00000000 c008a29c e08f6000 00008aa9
[   14.630833] 9f60: e08fbb58 e08fb9ab e08fe2d8 00001e3c 000025fc 00000000 00000000 00000000
[   14.658343] 9f80: 00000027 00000028 00000015 00000019 00000012 00000000 b6fa7198 00040000
[   14.677750] 9fa0: b6f9f090 c000d920 b6fa7198 00040000 b6e41000 00008aa9 b6f5bfa8 00000002
[   14.699475] 9fc0: b6fa7198 00040000 b6f9f090 00000080 b6fa71b8 00000000 00008aa9 00000000
[   14.722693] 9fe0: b6f660dc be9a5988 b6f563ad b6edbc10 60000010 b6e41000 00000000 00000000
[   14.731509] [<bf0063e8>] (AllocateDeviceID+0x0/0x48 [pvrsrvkm]) from [<bf0026ac>] (PVRSRVRegisterDCDeviceKM+0xf0/0x178 [pvrsrvkm])
[   14.743922] [<bf0026ac>] (PVRSRVRegisterDCDeviceKM+0xf0/0x178 [pvrsrvkm]) from [<bf03ac64>] (OMAPLFBInit+0x3e0/0x548 [omaplfb])
[   14.755983] [<bf03ac64>] (OMAPLFBInit+0x3e0/0x548 [omaplfb]) from [<bf03e008>] (OMAPLFB_Init+0x8/0x2c [omaplfb])
[   14.766663] [<bf03e008>] (OMAPLFB_Init+0x8/0x2c [omaplfb]) from [<c0008890>] (do_one_initcall+0x90/0x160)
[   14.776706] [<c0008890>] (do_one_initcall+0x90/0x160) from [<c0089f20>] (load_module+0x1944/0x1bf4)
[   14.786202] [<c0089f20>] (load_module+0x1944/0x1bf4) from [<c008a29c>] (sys_init_module+0xcc/0xec)
[   14.795609] [<c008a29c>] (sys_init_module+0xcc/0xec) from [<c000d920>] (ret_fast_syscall+0x0/0x30)
[   14.808016] Code: e3e00000 ebffed9d e1a00004 e8bd8038 (e5902000) 
[   14.814538] ---[ end trace 0c18612166250fc5 ]---
[   16.329018] init: plymouth-stop pre-start process (826) terminated with status 1