Skip to content

Instantly share code, notes, and snippets.

@bakueikozo

bakueikozo/DAM XG5000 boot log (Stanby->PowerOn->HDD Invalid)

Last active September 8, 2024 06:33
Show Gist options
  • Save bakueikozo/25e7b5531fc830e071956fe731385ab6 to your computer and use it in GitHub Desktop.
Save bakueikozo/25e7b5531fc830e071956fe731385ab6 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
DAM XG5000 boot log (Stanby->PowerOn->HDD Invalid)
39idxfsef2f712148b75194ab1d3c691b55bd4d3a5e956dS
#xos2P4a-99 (sfla 128kbytes. subid 0x99/99) [serial#da11014448e3b401247814ef5e2f1beb]
#stepxmb 0xac
#DRAM setup (method=0x10015858) ...
#DRAM0 Window : 0x#24#24#22#24# (17)
#DRAM1 Window : 0x#27#28#26#26# (19)
#DRAM0 Settings: WD=0x0b0c0b0b RG=0x08080808 RR=0x08080808 RF=0x08090909
#DRAM1 Settings: WD=0x0d0c0b0c RG=0x09090909 RR=0x09090909 RF=0x0909090a
#poisoned 131072 pages with 0x18d651f9
#step6 @0x00060914 sr=0x00000000
#step7
--- review xmasboot/configs/SPRmp.config for details [xmbb5-ezboot93-nand_st2] ---
xloadsize=60788
xload rc=6
subrom SHA-256: 43b5383fcd2ecd1f5366bea4eafc03bd740dc0a113af58d02846c117fb581b5b
ezboot93 @0xd00e5a94 (nand_st2) (actual cpu=@499MHz/dsp=333MHz/sys=333MHz)
on 8655 rev ES5 (subid 0x99) a2=0x00000002 a3=0x00000003
step12
#step22
ruamm0 [0x80000000,0x8f2f0000[ (~254738432 bytes)
ruamm1 [0xcea00000,0xcfd60000[ (~20316160 bytes)
[0xcfd20000,xos_public_ga=0xcfd20000[ and [0xcfd40000,0xcfd5ffff[ are lost for alignment)
channel#ei
x_ga=0xcfd1fcd4
[0x8e2f0000,ios_ga=0x8e800000[ and [0x8eeacfc1,0x8f2effff[ are lost for alignment)
GW32 0x0006f008 0xc0000000 [va=0x84000000]
GW32 0x0006f00c 0xc4000000 [va=0x88000000]
GW32 0x0006f010 0xc8000000 [va=0x8c000000]
step33
xos2k client version=19, server version=19
xos2 SHA-1 = ef2f712148b75194ab1d3c691b55bd4d3a5e956d (version 0x4a)
xos2 serial = da11014448e3b401247814ef5e2f1beb
Using zbootxenv ga=0xcfd0bcbc (va=0xbbd0bcbc)
**************************************
* SMP86xx zboot start ...
* Version: 3.1.0
* Started at 0xd00eca60.
* Configurations (chip revision: 3):
* Enabled checkpoints.
**************************************
DRAM0 dunit_cfg/delay0_ctrl (0x3514001a/0x4565132b).
DRAM1 dunit_cfg/delay0_ctrl (0x3514001a/0x4565132b).
Using UART port 0 as console.
Board ID.: XG5000
Setting up H/W from XENV block at 0xbbd0bcbc.
Setting <SYSCLK avclk_mux> to 0x15400000.
Setting <SYSCLK hostclk_mux> to 0x00000130.
Setting <IRQ rise edge trigger lo> to 0xff28ca06.
Setting <IRQ fall edge trigger lo> to 0x0001e000.
Setting <IRQ rise edge trigger hi> to 0x0c10009f.
Setting <IRQ fall edge trigger hi> to 0x00000000.
Setting <IRQ GPIO map> to 0x05090804.
Setting <PB default timing> to 0x03080202.
Keeping <PB timing0> to 0x03080202.
Keeping <PB Use timing0> to 0x000003f3.
Keeping <PB CS Config> to 0x00330003.
Enabled Devices: 0x00013ecc
PCIHost Ethernet I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SATA
PCI IRQ routing:
IDSEL 1: INTA(#14) INTB(#14) INTC(#14) INTD(#14)
IDSEL 2: INTA(#14) INTB(#14) INTC(#14) INTD(#14)
IDSEL 3: INTA(#14) INTB(#14) INTC(#14) INTD(#14)
IDSEL 4: INTA(#14) INTB(#14) INTC(#14) INTD(#14)
cd#0 disabled
cd#1 disabled
cd#2 want 96000000Hz: setting of 0x0000000021c00000-2^28
cd#2 cannot measure
cd#3 disabled
cd#4 want 33333333Hz: setting of 0x0000000061333343-2^28
cd#4 measured to 33332kHz
cd#5 want 18000000Hz: setting of 0x00000000b4000000-2^28
cd#5 measured to 18004kHz
cd#6 disabled
cd#7 disabled
cd#8 disabled
cd#9 disabled
cd#10 disabled
cd#11 disabled
GPIO dir/data = 0x00009004/0x00009004
UART0 GPIO mode/dir/data = 0x6e/0x00/0x00
UART1 GPIO mode/dir/data = 0x4c/0x00/0x00
UART2 GPIO mode/dir/data = 0x00/0x00/0x00
Stimulate (s) with GPIO12 .. 1,(1000000us) 0
MAC0: 00:a0:de:70:40:d2
alt0: 00:a0:de:70:40:d2
XENV block processing completed.
Default boot index: 1
xmboot booted from devtype: 0, chipsel: 0
Explicit boot order specified:
0x00 : devtype=0, CS=0
0x40 : devtype=4, CS=0
0x41 : devtype=4, CS=1
ezboot buffers, setup in DRAM bank#1:
Alloting 2097152 bytes for heap.
Alloting 16777216 bytes for reading.
Alloting 16777216 bytes for decryption.
Trying devtype=0 chipsel=0
nand_probe 0x0xd00f6b70
nand_Mg_open 0
reading z.boot1 (vzx=0xbbd0bcbc) is 0x000c0000
Reading NAND CS0, addr 0x000c0000, size 0x00000800 to 0x01840000
Reading NAND CS0, addr 0x000c0800, size 0x008da400 to 0x01840800
Found.
ROMFS found at 0x0x01840000, Volume name = MIPSLINUX_XLOAD
Found 1 file(s) to be processed in ROMFS.
Processing vmlinux_xload.zbf (start: 0x01840090, size: 0x008dab64)
Checking zboot file signature .. OK.
Warning: header version mismatched.
*** Fully Encrypted.
src_addr = 0x018400b0, dest addr = 0x02840000
XLOADING src=0xc18400b0, dest=0xc2840000, size=0x008dab44
xload.c:77: Waiting for XLOAD completion.
xload.c:87: XLOAD done, status = 0x6.
Decompressing to 0x84000000 .. OK (11410971/0xae1e1b).
Load time total 0/0 msec.
Execute at 0x84368000 ..
Linux version 2.6.22.19-23-sigma (soundnet@yamaha@hamamatsu) (gcc version 4.3.2 (Sourcery G++ Lite 4.3-51) ) #1172 PREEMPT Thu Jan 13 16:15:26 JST 2011
Mixed DRAM usage enabled.
Configured for SMP865x, detected SMP8655 (revision unknown).
Detected CPU/System/DSP Frequencies: 499.50/333.00/333.00MHz
SMP86xx Enabled Devices under Linux/XENV 0xcfd0bcbc = 0x00013ecc
PCIHost Ethernet I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SATA
Desired kernel memory size: 0x0ea00000
Max. DRAM0/1 size allowed: 0x00000000/0x0ea00000
Mapped 0xc0000000(size 0x04000000) via remap2
Mapped 0xc4000000(size 0x04000000) via remap3
Mapped 0xc8000000(size 0x04000000) via remap4
Mapped 0xcc000000(size 0x02a00000) via remap5
Final kernel memory size: 0x0ea00000
CPU revision is: 0001937c
FPU revision is: 01739300
Determined physical RAM map:
memory: 0ea00000 @ 04000000 (usable)
Desired kernel memory size: 0x0ea00000
Max. DRAM0/1 size allowed: 0x00000000/0x0ea00000
Mapped 0xc0000000(size 0x04000000) via remap2
Mapped 0xc4000000(size 0x04000000) via remap3
Mapped 0xc8000000(size 0x04000000) via remap4
Mapped 0xcc000000(size 0x02a00000) via remap5
Final kernel memory size: 0x0ea00000
User-defined physical RAM map:
memory: 0ea00000 @ 04000000 (usable)
Wasting 131072 bytes for tracking 4096 unused pages
Initrd not found or empty - disabling initrd
On node 0 totalpages: 19072
DMA zone: 37 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 19035 pages, LIFO batch:3
Normal zone: 0 pages used for memmap
Built 1 zonelists. Total pages: 19035
Kernel command line: console=ttyS0,115200 mem=234M
Primary instruction cache 32kB, 4-way, physically tagged, linesize 32 bytes.
Primary data cache 32kB, 4-way, physically tagged, no aliases, linesize 32 bytes
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 2048 (order: 11, 8192 bytes)
Using 249.750 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 4, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 3, 131072 bytes)
Memory: 226816k/239616k available (2877k kernel code, 12640k reserved, 594k data, 7664k init, 0k highmem)
Calibrating delay loop... 331.77 BogoMIPS (lpj=165888)
Mount-cache hash table entries: 2048
NET: Registered protocol family 16
PCI: Initializing SMP86xx PCI host controller
PCI: Remapped PCI I/O space 0x58000000 to 0xc0000000, size 64 kB
PCI: Remapped PCI config space 0x50000000 to 0xc0018000, size 10 kB
PCI: Configured SMP86xx as PCI slave with 1024MB PCI memory
PCI: Region size is 131072KB
PCI: Map DMA memory 0x04000000-0x12a00000 for PCI at 0x48000000
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Time: TANGOX clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 0, 16384 bytes)
TCP established hash table entries: 16384 (order: 3, 131072 bytes)
TCP bind hash table entries: 16384 (order: 2, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
tango3dog: Hardware Watchdog Timer for SMP864x/SMP865x 0.1 (def. timeout: 30 sec)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A
tangox_enet0: detected phy at address 0x00
tangox_enet0: Ethernet driver for SMP864x/SMP865x internal MAC core 0: 100Mbps Base at 0x26000
tangox_enet0: mac address 00:a0:de:70:40:d2
tangox_enet1: ethernet mac_core 1 support is disabled from XENV
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 7664k freed
Using rootfs from initramfs/initrd ...
sigmablock: module license 'Proprietary' taints kernel.
CS 0 vendor id 0x20.......
CS 0 device id 0xdc.......
................................................................................................................................................................................................................................................................
********************** Parition configureations for CS 0 *******************
**** parition 1 offset [0x00000000] + size [0x00080000] = [0x00080000] ****
**** parition 2 offset [0x00080000] + size [0x00040000] = [0x000c0000] ****
**** parition 3 offset [0x000c0000] + size [0x00c40000] = [0x00d00000] ****
**** parition 4 offset [0x00d00000] + size [0x01000000] = [0x01d00000] ****
**** parition 5 offset [0x01d00000] + size [0x00800000] = [0x02500000] ****
**** parition 6 offset [0x02500000] + size [0x02000000] = [0x04500000] ****
**** parition 7 offset [0x04500000] + size [0x18920000] = [0x1ce20000] ****
chip_index 0 pos 0
CS 1 vendor id 0x00.......
CS 1 device id 0x00.......
nand_probe Error on chip 1 ret code -13
k_name=Tangox SATA 0 driver=Tangox SATA 0
SATA version 0x3139302a ID 0x0 is detected
scsi0 : Tangox SATA 0
ata1: SATA max UDMA/133 cmd 0xa0023000 ctl 0xa0023020 bmdma 0xcdcdcdcd irq 49
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: ATA-10: HGST HUS722T2TALA604, RAGNWA09, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA HGST HUS722T2TAL RAGN PQ: 0 ANSI: 5
ata1: dev 0 max request 256 sectors (lba48)
sd 0:0:0:0: [sda] 3907029168 512-byte hardware sectors (2000399 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 3907029168 512-byte hardware sectors (2000399 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
k_name=Tangox SATA 1 driver=Tangox SATA 1
SATA version 0x3139302a ID 0x0 is detected
scsi1 : Tangox SATA 0
ata2: SATA max UDMA/133 cmd 0xa0023800 ctl 0xa0023820 bmdma 0xcdcdcdcd irq 62
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: ATA-10: HGST HUS722T2TALA604, RAGNWA09, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA HGST HUS722T2TAL RAGN PQ: 0 ANSI: 5
ata2: dev 0 max request 256 sectors (lba48)
sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 >
sd 1:0:0:0: [sdb] Attached SCSI disk
driver tangox-ehci-hcd, 10 Dec 2004
TangoX USB initializing...
tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021400
tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
tangox-ohci-hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
TangoX USB was initialized.
Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using tangox-ehci-hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sigmblockh, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kernel.core_pattern = /SPR/HDA/TDP/Data/1/1.999
kernel.core_uses_pid = 0
vm.overcommit_ratio = 99
vm.overcommit_memory = 2
net.ipv4.tcp_keepalive_time = 15
net.ipv4.tcp_keepalive_probes = 9
net.ipv4.tcp_keepalive_intvl = 5
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb5, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
/tango/sdk is SATA-1 PGM2
Initializing random number generator... done.
Starting watchdog timer with 30 second expiration ...
Started watchdog timer.
Starting network...
usb 2-2: new full speed USB device using tangox-ohci-hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usb 1-1.4: new full speed USB device using tangox-ehci-hcd and address 4
usb 1-1.4: configuration #1 chosen from 1 choice
/dev/sdb:
setting drive write-caching to 0 (off)
ata2.00: configured for UDMA/133
ata2: EH complete
sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sdb2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
attempt to access beyond end of device
sdb6: rw=0, want=332047424, limit=332047422
attempt to access beyond end of device
sdb6: rw=0, want=332047424, limit=332047422
UDF-fs: No partition found (1)
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sdb6, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sdb7, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
attempt to access beyond end of device
sdb8: rw=0, want=3502571564, limit=3502571562
attempt to access beyond end of device
sdb8: rw=0, want=3502571564, limit=3502571562
UDF-fs: No partition found (1)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
/dev/sda:
setting drive write-caching to 0 (off)
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 3907029168 512-byte hardware sectors (2000399 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda5, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
attempt to access beyond end of device
sda6: rw=0, want=332047424, limit=332047422
attempt to access beyond end of device
sda6: rw=0, want=332047424, limit=332047422
UDF-fs: No partition found (1)
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda6, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda7, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
attempt to access beyond end of device
sda8: rw=0, want=3502571564, limit=3502571562
attempt to access beyond end of device
sda8: rw=0, want=3502571564, limit=3502571562
UDF-fs: No partition found (1)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Normal boot
<<< NAND Flash Check >>>
64+0 records in
64+0 records out
64+0 records in
64+0 records out
64+0 records in
64+0 records out
64+0 records in
64+0 records out
9067+0 records in
9067+0 records out
9067+0 records in
9067+0 records out
189+0 records in
189+0 records out
189+0 records in
189+0 records out
<<< search 1000.20377 >>>
<<< search 1000.10377 >>>
<<< file size count >>>
<<< next version is 378 >>>
<<< next version is not found . >>>
Kernel. date= 2011/09/08 version=v1.78 svn=rel20110905_11584_MP
SDK.... date= 2014/02/17 version=v3.62 svn=trunk_14761
Yamaha. date= 2019/05/28 version=v3.77 svn=trunk_14871
kernel.panic_on_oops = 1
kernel.panic = 10
kernel.core_pattern = /SPR/HDD/TDP/Data/1/1.999
/tango/sdk /tango/sdk/dcchd_build
/tango/sdk/dcchd_build
Your target environment is configured with:
PATH = /tango/sdk/dcchd_build/directfb/bin:/tango/sdk/mrua/MRUA_src/../bin:/tango/sdk/dcchd_build/test:/tango/sdk/yamaha/bin:/tango/sdk/mrua/bin:/tango/sdk/mrua/MRUA_src/llad_xtest:/tango/sdk/mrua/MRUA_src/rmchannel/xos2k_client:/tango/sdk/mrua/MRUA_src/llad_smallapps:/tango/sdk:/tango/sdk/yamaha/bin:/tango/sdk/yamaha/app:/tango/sdk/yamaha/script:/sbin:/usr/sbin:/bin:/usr/bin
LD_LIBRARY_PATH = /tango/sdk/dcchd_build/directfb/lib:/tango/sdk/mrua/MRUA_src/../lib:/tango/sdk/dcchd_build/dcchd/core:/tango/sdk/dcchd_build/dcchd/brd:/tango/sdk/dcchd_build/dcchd/dvdvr:/tango/sdk/dcchd_build/dcchd/mono:/tango/sdk/dcchd_build/dcchd/curacao:/tango/sdk/dcchd_build/dcchd/curacao/lib:/tango/sdk/dcchd_build/dcchd/dtv/tuner:/tango/sdk/dcchd_build/dcchd/dtv/capture:/tango/sdk/dcchd_build/dcchd/dtv/network:/tango/sdk/dcchd_build/dcchd/dtv:/tango/sdk/dcchd_build/dcchd/dtv/hal:/tango/sdk/dcchd_build/dcchd/dtv/capture:/tango/sdk/dcchd_build/dcchd/dcchd:/tango/sdk/dcchd_build/dcchd/ykok:/tango/sdk/dcchd_build/ykokap:/tango/sdk/dcchd_build:/tango/sdk/yamaha/lib:/tango/sdk/mrua/lib/:
HOME = /
CDROM_MOUNT_POINT = /cdrom
CDROM_DEVICE_NAME = /dev/sr0
IMAGE_RESOURCE_DIR = /tango/sdk/dcchd_build/test
QT_INSTALL_DIR =
loading ... /tango/sdk/mrua/modules/2.6.22.19-23-sigma/llad.ko max_dmapool_memory_size=0x800000 max_dmabuffer_log2_size=19
/tango/sdk/mrua/MRUA_src/llad_xtest/genxenv2
/tango/sdk/mrua/MRUA_src/llad_smallapps/gbus_read_bin_to_file
To ga=0x8ee00000
loading ... /tango/sdk/mrua/modules/2.6.22.19-23-sigma/em8xxx.ko
em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/build/sdk/TP1/mrua_SMP8654F_3_7_2_rc_26_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1582] init_module: begun
em8xxx0 [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/build/sdk/TP1/mrua_SMP8654F_3_7_2_rc_26_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1442] identify: board as unknown subid
em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/build/sdk/TP1/mrua_SMP8654F_3_7_2_rc_26_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1568] identify: device 0x8655 0x5 accepted with software tango3ES3
em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/build/sdk/TP1/mrua_SMP8654F_3_7_2_rc_26_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1647] mumk_register_tasklet 0xc0098000
mumk_register_tasklet: (0) tasklet c0098000 status @c0282ad4
em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/build/sdk/TP1/mrua_SMP8654F_3_7_2_rc_26_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:364] mumk_register_channel_tasklet[0] 0xc00a0000: pE=0xc02828b0 ch_idx=33 module_id=0x3c 0xc02828d0
em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/build/sdk/TP1/mrua_SMP8654F_3_7_2_rc_26_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:364] mumk_register_channel_tasklet[1] 0xc00a8000: pE=0xc02828b0 ch_idx=35 module_id=0x3c 0xc02828dc
em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/build/sdk/TP1/mrua_SMP8654F_3_7_2_rc_26_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:364] mumk_register_channel_tasklet[2] 0xc00b0000: pE=0xc02828b0 ch_idx=41 module_id=0x13c 0xc02828e8
em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/build/sdk/TP1/mrua_SMP8654F_3_7_2_rc_26_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:364] mumk_register_channel_tasklet[3] 0xc0104000: pE=0xc02828b0 ch_idx=43 module_id=0x13c 0xc02828f4
em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/build/sdk/TP1/mrua_SMP8654F_3_7_2_rc_26_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:364] mumk_register_channel_tasklet[4] 0xc010c000: pE=0xc02828b0 ch_idx=37 module_id=0x23c 0xc0282900
em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/build/sdk/TP1/mrua_SMP8654F_3_7_2_rc_26_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:364] mumk_register_channel_tasklet[5] 0xc0114000: pE=0xc02828b0 ch_idx=39 module_id=0x23c 0xc028290c
em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/build/sdk/TP1/mrua_SMP8654F_3_7_2_rc_26_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:364] mumk_register_channel_tasklet[6] 0xc011c000: pE=0xc02828b0 ch_idx=69 module_id=0x3f 0xc0282918
em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/build/sdk/TP1/mrua_SMP8654F_3_7_2_rc_26_dev.mips/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1744] init_module: done. Found 1 em8xxx
loading ... usb-storage
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
loading ... ftdi_sio
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
drivers/usb/serial/ftdi_sio.c: Detected FT2232C
drivers/usb/serial/ftdi_sio.c: Number of endpoints 2
drivers/usb/serial/ftdi_sio.c: Endpoint 1 MaxPacketSize 64
drivers/usb/serial/ftdi_sio.c: Endpoint 2 MaxPacketSize 64
drivers/usb/serial/ftdi_sio.c: Setting MaxPacketSize 64
usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
ftdi_sio 1-1.4:1.1: FTDI USB Serial Device converter detected
drivers/usb/serial/ftdi_sio.c: Detected FT2232C
drivers/usb/serial/ftdi_sio.c: Number of endpoints 2
drivers/usb/serial/ftdi_sio.c: Endpoint 1 MaxPacketSize 64
drivers/usb/serial/ftdi_sio.c: Endpoint 2 MaxPacketSize 64
drivers/usb/serial/ftdi_sio.c: Setting MaxPacketSize 64
usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
usbcore: registered new interface driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.5.0:USB FTDI Serial Converters Driver
loading ... snd-usb-audio
usbcore: registered new interface driver snd-usb-audio
loading ... cn
loading ... /tango/sdk/yamaha/module/cp2101.ko
drivers/usb/serial/usb-serial.c: USB Serial support registered for cp2101
usbcore: registered new interface driver cp2101
{CP2101}: cp2101.c Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0.071
loading ... sysfpga_mod.ko
PCI: Enabling device 0000:00:03.0 (0000 -> 0002)
loading ... ki2c_core_mod.ko
loading ... kgpio_core_mod.ko
loading ... rawmidi_if_mod.ko
loading ... midi_mod.ko
loading ... mdport_mod.ko
loading ... dav_mod.ko
PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
PM: Writing back config space on device 0000:00:02.0 at offset f (was 100, writing 116)
PM: Writing back config space on device 0000:00:02.0 at offset 9 (was 8, writing 3800008)
PM: Writing back config space on device 0000:00:02.0 at offset 8 (was 8, writing 3000008)
PM: Writing back config space on device 0000:00:02.0 at offset 7 (was 8, writing 2800008)
PM: Writing back config space on device 0000:00:02.0 at offset 6 (was 0, writing 4000000)
PM: Writing back config space on device 0000:00:02.0 at offset 5 (was 0, writing 4800000)
PM: Writing back config space on device 0000:00:02.0 at offset 4 (was 8, writing 2000008)
PM: Writing back config space on device 0000:00:02.0 at offset 3 (was 0, writing 4)
PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 2000000, writing 2000112)
loading ... pdev_mod.ko
1+0 records in
1+0 records out
### product number:
00000000 41 46 30 31 37 39 33 39 ff ff ff ff ff ff ff ff |AF017939........|
00000010
### product number is SPR1/SPR2(AF0)
loading ... hdmiswitcher_spr2_mod.ko
{HDMISW}: by ADV7630 (hdmisw_init:2002)
{HDMISW}: 0x00000001 (hdmisw_init:2006)
{HDMISW}: 0x00000001 (hdmisw_init:2007)
{HDMISW}: 0x00000001 (hdmisw_init:2008)
{HDMISW}: 0x00000001 (hdmisw_init:2009)
{HDMISW}: SPR(0) (hdmisw_init:2014)
usb 2-2: USB disconnect, address 2
loading ... clkmanager_mod.ko
loading ... coin_mod.ko
loading ... rtc-r2025_mod.ko
rtc_r2025_mod rtc_r2025_mod.0: rtc core: registered rtc_r2025_mod as rtc0
loading ... userintr_mod.ko
loading ... audcalib_mod.ko
rtc_r2025_mod rtc_r2025_mod.0: retrieved date/time is not valid.
hwclock: settimeofday() failed: Invalid argument
Sat Jan 1 09:00:34 JST 2000
/dev/sdb5: clean, 845/306432 files, 74155/612470 blocks
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
APGM2=0
/tango/sdk /tango/sdk/dcchd_build
/tango/sdk/dcchd_build
Your target environment is configured with:
PATH = /tango/sdk/dcchd_build/directfb/bin:/tango/sdk/mrua/MRUA_src/../bin:/tango/sdk/dcchd_build/test:/tango/sdk/yamaha/bin:/tango/sdk/mrua/bin:/tango/sdk/mrua/MRUA_src/llad_xtest:/tango/sdk/mrua/MRUA_src/rmchannel/xos2k_client:/tango/sdk/mrua/MRUA_src/llad_smallapps:/sbin:/usr/sbin:/bin:/usr/bin
LD_LIBRARY_PATH = /tango/sdk/dcchd_build/directfb/lib:/tango/sdk/mrua/MRUA_src/../lib:/tango/sdk/dcchd_build/dcchd/core:/tango/sdk/dcchd_build/dcchd/brd:/tango/sdk/dcchd_build/dcchd/dvdvr:/tango/sdk/dcchd_build/dcchd/mono:/tango/sdk/dcchd_buildrtc_r2025_mod rtc_r2025_mod.0: retrieved date/time is not valid.
/dcchd/curacao:/tango/sdk/dcchd_build/dcchd/curacao/lib:/tango/sdk/dcchd_build/dcchd/dtv/tuner:/tango/sdk/dcchd_build/dcchd/dtv/capture:/tango/sdk/dcchd_build/dcchd/dtv/network:/tango/sdk/dcchd_build/dcchd/dtv:/tango/sdk/dcchd_build/dcchd/dtv/hal:/tango/sdk/dcchd_build/dcchd/dtv/capture:/tango/sdk/dcchd_build/dcchd/dcchd:/tango/sdk/dcchd_build/dcchd/ykok:/tango/sdk/dcchd_build/ykokap:/tango/sdk/dcchd_build:/tango/sdk/yamaha/lib:/tango/sdk/mrua/lib/:
HOME = /
CDROM_MOUNT_POINT = /cdrom
CDROM_DEVICE_NAME = /dev/sr0
IMAGE_RESOURCE_DIR = /tango/sdk/dcchd_build/test
QT_INSTALL_DIR =
hwclock: settimeofday() failed: Invalid argument
core file size (blocks, -c) unlimited
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
max locked memory (kbytes, -l) 128
max memory size (kbytes, -m) unlimited
open files (-n) 1024
pipe size (512 bytes, -p) 8
stack size (kbytes, -s) 128
cpu time (seconds, -t) unlimited
max user processes (-u) 936
virtual memory (kbytes, -v) unlimited
rr_code : -1
rr_version : -1
[ ASE]:inf: UMSG Initialize OK (ase_ac.c:1073)
[ ASE]:inf: TIM Initialize OK (ase_ac.c:1073)
[ ASE]:inf: Hardware ID: 0.0 (ase.c:1127)
[ KLOG]:inf: Linux version 2.6.22.19-23-sigma (soundnet@yamaha@hamamatsu) (gcc version 4.3.2 (kernel:0)
[ KLOG]:inf: Mixed DRAM usage enabled. (kernel:0)
[ KLOG]:inf: Configured for SMP865x, detected SMP8655 (revision unknown). (kernel:0)
[ KLOG]:inf: Detected CPU/System/DSP Frequencies: 499.50/333.00/333.00MHz (kernel:0)
[ KLOG]:inf: SMP86xx Enabled Devices under Linux/XENV 0xcfd0bcbc = 0x00013ecc (kernel:0)
[ KLOG]:inf: PCIHost Ethernet I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SATA (kernel:0)
[ KLOG]:inf: Desired kernel memory size: 0x0ea00000 (kernel:0)
[ KLOG]:inf: Max. DRAM0/1 size allowed: 0x00000000/0x0ea00000 (kernel:0)
[ KLOG]:inf: Mapped 0xc0000000(size 0x04000000) via remap2 (kernel:0)
[ KLOG]:inf: Mapped 0xc4000000(size 0x04000000) via remap3 (kernel:0)
[ KLOG]:inf: Mapped 0xc8000000(size 0x04000000) via remap4 (kernel:0)
[ KLOG]:inf: Mapped 0xcc000000(size 0x02a00000) via remap5 (kernel:0)
[ KLOG]:inf: Final kernel memory size: 0x0ea00000 (kernel:0)
[ KLOG]:inf: CPU revision is: 0001937c (kernel:0)
[ KLOG]:inf: FPU revision is: 01739300 (kernel:0)
[ KLOG]:inf: Determined physical RAM map: (kernel:0)
[ KLOG]:inf: memory: 0ea00000 @ 04000000 (usable) (kernel:0)
[ KLOG]:inf: Desired kernel memory size: 0x0ea00000 (kernel:0)
[ KLOG]:inf: Max. DRAM0/1 size allowed: 0x00000000/0x0ea00000 (kernel:0)
[ KLOG]:inf: Mapped 0xc0000000(size 0x04000000) via remap2 (kernel:0)
[ KLOG]:inf: Mapped 0xc4000000(size 0x04000000) via remap3 (kernel:0)
[ KLOG]:inf: Mapped 0xc8000000(size 0x04000000) via remap4 (kernel:0)
[ KLOG]:inf: Mapped 0xcc000000(size 0x02a00000) via remap5 (kernel:0)
[ KLOG]:inf: Final kernel memory size: 0x0ea00000 (kernel:0)
[ KLOG]:inf: User-defined physical RAM map: (kernel:0)
[ KLOG]:inf: memory: 0ea00000 @ 04000000 (usable) (kernel:0)
[ KLOG]:inf: Wasting 131072 bytes for tracking 4096 unused pages (kernel:0)
[ KLOG]:inf: Initrd not found or empty - disabling initrd (kernel:0)
[ KLOG]:inf: Built 1 zonelists. Total pages: 19035 (kernel:0)
[ KLOG]:inf: Kernel command line: console=ttyS0,115200 mem=234M (kernel:0)
[ KLOG]:inf: Primary instruction cache 32kB, 4-way, physically tagged, linesize 32 bytes. (kernel:0)
[ KLOG]:inf: Primary data cache 32kB, 4-way, physically tagged, no aliases, linesize 32 byte (kernel:0)
[ KLOG]:inf: Synthesized TLB refill handler (20 instructions). (kernel:0)
[ KLOG]:inf: Synthesized TLB load handler fastpath (32 instructions). (kernel:0)
[ KLOG]:inf: Synthesized TLB store handler fastpath (32 instructions). (kernel:0)
[ KLOG]:inf: Synthesized TLB modify handler fastpath (31 instructions). (kernel:0)
[ KLOG]:inf: Cache parity protection disabled (kernel:0)
[ KLOG]:inf: PID hash table entries: 2048 (order: 11, 8192 bytes) (kernel:0)
[ KLOG]:inf: Using 249.750 MHz high precision timer. (kernel:0)
[ KLOG]:inf: Console: colour dummy device 80x25 (kernel:0)
[ KLOG]:inf: Dentry cache hash table entries: 65536 (order: 4, 262144 bytes) (kernel:0)
[ KLOG]:inf: Inode-cache hash table entries: 32768 (order: 3, 131072 bytes) (kernel:0)
[ KLOG]:inf: Memory: 226816k/239616k available (2877k kernel code, 12640k reserved, 594k dat (kernel:0)
[ KLOG]:inf: Mount-cache hash table entries: 2048 (kernel:0)
[ KLOG]:inf: NET: Registered protocol family 16 (kernel:0)
[ KLOG]:inf: PCI: Initializing SMP86xx PCI host controller (kernel:0)
[ KLOG]:inf: PCI: Remapped PCI I/O space 0x58000000 to 0xc0000000, size 64 kB (kernel:0)
[ KLOG]:inf: PCI: Remapped PCI config space 0x50000000 to 0xc0018000, size 10 kB (kernel:0)
[ KLOG]:inf: PCI: Configured SMP86xx as PCI slave with 1024MB PCI memory (kernel:0)
[ KLOG]:inf: PCI: Region size is 131072KB (kernel:0)
[ KLOG]:inf: PCI: Map DMA memory 0x04000000-0x12a00000 for PCI at 0x48000000 (kernel:0)
[ KLOG]:inf: SCSI subsystem initialized (kernel:0)
[ KLOG]:inf: usbcore: registered new interface driver usbfs (kernel:0)
[ KLOG]:inf: usbcore: registered new interface driver hub (kernel:0)
[ KLOG]:inf: usbcore: registered new device driver usb (kernel:0)
[ KLOG]:inf: Time: TANGOX clocksource has been installed. (kernel:0)
[ KLOG]:inf: NET: Registered protocol family 2 (kernel:0)
[ KLOG]:inf: IP route cache hash table entries: 4096 (order: 0, 16384 bytes) (kernel:0)
[ KLOG]:inf: TCP established hash table entries: 16384 (order: 3, 131072 bytes) (kernel:0)
[ KLOG]:inf: TCP bind hash table entries: 16384 (order: 2, 65536 bytes) (kernel:0)
[ KLOG]:inf: TCP: Hash tables configured (established 16384 bind 16384) (kernel:0)
[ KLOG]:inf: TCP reno registered (kernel:0)
[ KLOG]:inf: io scheduler noop registered (kernel:0)
[ KLOG]:inf: io scheduler anticipatory registered (default) (kernel:0)
[ KLOG]:inf: io scheduler deadline registered (kernel:0)
[ KLOG]:inf: io scheduler cfq registered (kernel:0)
[ KLOG]:inf: tango3dog: Hardware Watchdog Timer for SMP864x/SMP865x 0.1 (def. timeout: 30 se (kernel:0)
[ KLOG]:inf: Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled (kernel:0)
[ KLOG]:inf: serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A (kernel:0)
[ KLOG]:inf: serial8250: ttyS1 at MMIO 0x0 (irq = 10) is a 16550A (kernel:0)
[ KLOG]:err: tangox_enet0: detected phy at address 0x00 (kernel:0)
[ KLOG]:inf: tangox_enet0: Ethernet driver for SMP864x/SMP865x internal MAC core 0: 100Mbps (kernel:0)
[ KLOG]:inf: tangox_enet0: mac address 00:a0:de:70:40:d2 (kernel:0)
[ KLOG]:inf: tangox_enet1: ethernet mac_core 1 support is disabled from XENV (kernel:0)
[ KLOG]:inf: mice: PS/2 mouse device common for all mice (kernel:0)
[ KLOG]:inf: TCP cubic registered (kernel:0)
[ KLOG]:inf: NET: Registered protocol family 1 (kernel:0)
[ KLOG]:inf: NET: Registered protocol family 17 (kernel:0)
[ KLOG]:inf: drivers/rtc/hctosys.c: unable to open rtc device (rtc0) (kernel:0)
[ KLOG]:inf: Freeing unused kernel memory: 7664k freed (kernel:0)
[ KLOG]:inf: sigmablock: module license 'Proprietary' taints kernel. (kernel:0)
[ KLOG]:inf: (kernel:0)
[ KLOG]:inf: CS 0 vendor id 0x20....... (kernel:0)
[ KLOG]:inf: CS 0 device id 0xdc....... (kernel:0)
[ KLOG]:inf: ............................................................................... (kernel:0)
[ KLOG]:inf: (kernel:0)
[ KLOG]:inf: ********************** Parition configureations for CS 0 ******************* (kernel:0)
[ KLOG]:inf: **** parition 1 offset [0x00000000] + size [0x00080000] = [0x00080000] **** (kernel:0)
[ KLOG]:inf: **** parition 2 offset [0x00080000] + size [0x00040000] = [0x000c0000] **** (kernel:0)
[ KLOG]:inf: **** parition 3 offset [0x000c0000] + size [0x00c40000] = [0x00d00000] **** (kernel:0)
[ KLOG]:inf: **** parition 4 offset [0x00d00000] + size [0x01000000] = [0x01d00000] **** (kernel:0)
[ KLOG]:inf: **** parition 5 offset [0x01d00000] + size [0x00800000] = [0x02500000] **** (kernel:0)
[ KLOG]:inf: **** parition 6 offset [0x02500000] + size [0x02000000] = [0x04500000] **** (kernel:0)
[ KLOG]:inf: **** parition 7 offset [0x04500000] + size [0x18920000] = [0x1ce20000] **** (kernel:0)
[ KLOG]:inf: chip_index 0 pos 0 (kernel:0)
[ KLOG]:inf: (kernel:0)
[ KLOG]:inf: CS 1 vendor id 0x00....... (kernel:0)
[ KLOG]:inf: CS 1 device id 0x00....... (kernel:0)
[ KLOG]:inf: nand_probe Error on chip 1 ret code -13 (kernel:0)
[ KLOG]:inf: k_name=Tangox SATA 0 driver=Tangox SATA 0 (kernel:0)
[ KLOG]:inf: SATA version 0x3139302a ID 0x0 is detected (kernel:0)
[ KLOG]:inf: scsi0 : Tangox SATA 0 (kernel:0)
[ KLOG]:inf: ata1: SATA max UDMA/133 cmd 0xa0023000 ctl 0xa0023020 bmdma 0xcdcdcdcd irq 49 (kernel:0)
[ KLOG]:inf: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) (kernel:0)
[ KLOG]:inf: ata1.00: ATA-10: HGST HUS722T2TALA604, RAGNWA09, max UDMA/133 (kernel:0)
[ KLOG]:inf: ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32) (kernel:0)
[ KLOG]:inf: ata1.00: configured for UDMA/133 (kernel:0)
[ KLOG]:inf: scsi 0:0:0:0: Direct-Access ATA HGST HUS722T2TAL RAGN PQ: 0 ANSI: 5 (kernel:0)
[ KLOG]:inf: ata1: dev 0 max request 256 sectors (lba48) (kernel:0)
[ KLOG]:inf: sd 0:0:0:0: [sda] 3907029168 512-byte hardware sectors (2000399 MB) (kernel:0)
[ KLOG]:inf: sd 0:0:0:0: [sda] Write Protect is off (kernel:0)
[ KLOG]:inf: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DP (kernel:0)
[ KLOG]:inf: sd 0:0:0:0: [sda] 3907029168 512-byte hardware sectors (2000399 MB) (kernel:0)
[ KLOG]:inf: sd 0:0:0:0: [sda] Write Protect is off (kernel:0)
[ KLOG]:inf: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DP (kernel:0)
[ KLOG]:inf: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > (kernel:0)
[ KLOG]:inf: sd 0:0:0:0: [sda] Attached SCSI disk (kernel:0)
[ KLOG]:inf: k_name=Tangox SATA 1 driver=Tangox SATA 1 (kernel:0)
[ KLOG]:inf: SATA version 0x3139302a ID 0x0 is detected (kernel:0)
[ ASE]:inf: ASE Initialize OK (ase_ac.c:1073)
[ KLOG]:inf: scsi1 : Tangox SATA 0 (kernel:0)
[ KLOG]:inf: ata2: SATA max UDMA/133 cmd 0xa0023800 ctl 0xa0023820 bmdma 0xcdcdcdcd irq 62 (kernel:0)
[ KLOG]:inf: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) (kernel:0)
[ KLOG]:inf: ata2.00: ATA-10: HGST HUS722T2TALA604, RAGNWA09, max UDMA/133 (kernel:0)
[ KLOG]:inf: ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32) (kernel:0)
[ KLOG]:inf: ata2.00: configured for UDMA/133 (kernel:0)
[ KLOG]:inf: scsi 1:0:0:0: Direct-Access ATA HGST HUS722T2TAL RAGN PQ: 0 ANSI: 5 (kernel:0)
[ KLOG]:inf: ata2: dev 0 max request 256 sectors (lba48) (kernel:0)
[ KLOG]:inf: sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB) (kernel:0)
[ KLOG]:inf: sd 1:0:0:0: [sdb] Write Protect is off (kernel:0)
[ KLOG]:inf: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DP (kernel:0)
[ KLOG]:inf: sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB) (kernel:0)
[ KLOG]:inf: sd 1:0:0:0: [sdb] Write Protect is off (kernel:0)
[ KLOG]:inf: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DP (kernel:0)
[ KLOG]:inf: sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 > (kernel:0)
[ ASE]:inf: ASE Initialize OK (ase_ac.c:1073)
[ KLOG]:inf: sd 1:0:0:0: [sdb] Attached SCSI disk (kernel:0)
[ KLOG]:inf: driver tangox-ehci-hcd, 10 Dec 2004 (kernel:0)
[ KLOG]:inf: TangoX USB initializing... (kernel:0)
[ KLOG]:inf: tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0 (kernel:0)
[ KLOG]:inf: tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1 (kernel:0)
[ KLOG]:inf: tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021400 (kernel:0)
[ KLOG]:inf: tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 (kernel:0)
[ KLOG]:inf: usb usb1: configuration #1 chosen from 1 choice (kernel:0)
[ KLOG]:inf: hub 1-0:1.0: USB hub found (kernel:0)
[ KLOG]:inf: hub 1-0:1.0: 2 ports detected (kernel:0)
[ KLOG]:inf: TangoX USB was initialized. (kernel:0)
[ KLOG]:inf: Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47 (kernel:0)
[ KLOG]:inf: tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller (kernel:0)
[ KLOG]:inf: tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2 (kernel:0)
[ KLOG]:inf: tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500 (kernel:0)
[ KLOG]:inf: usb usb2: configuration #1 chosen from 1 choice (kernel:0)
[ KLOG]:inf: hub 2-0:1.0: USB hub found (kernel:0)
[ KLOG]:inf: hub 2-0:1.0: 2 ports detected (kernel:0)
[ KLOG]:inf: usb 1-1: new high speed USB device using tangox-ehci-hcd and address 2 (kernel:0)
[ KLOG]:inf: usb 1-1: configuration #1 chosen from 1 choice (kernel:0)
[ KLOG]:inf: hub 1-1:1.0: USB hub found (kernel:0)
[ KLOG]:inf: hub 1-1:1.0: 4 ports detected (kernel:0)
[ KLOG]:inf: kjournald starting. Commit interval 5 seconds (kernel:0)
[ KLOG]:inf: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended (kernel:0)
[ KLOG]:inf: EXT3 FS on sigmblockh, internal journal (kernel:0)
[ KLOG]:inf: EXT3-fs: mounted filesystem with ordered data mode. (kernel:0)
[ KLOG]:inf: kjournald starting. Commit interval 5 seconds (kernel:0)
[ KLOG]:inf: EXT3 FS on sdb5, internal journal (kernel:0)
[ KLOG]:inf: EXT3-fs: recovery complete. (kernel:0)
[ KLOG]:inf: EXT3-fs: mounted filesystem with ordered data mode. (kernel:0)
[ KLOG]:inf: Started watchdog timer. (kernel:0)
[ KLOG]:inf: usb 2-2: new full speed USB device using tangox-ohci-hcd and address 2 (kernel:0)
[ KLOG]:inf: usb 2-2: configuration #1 chosen from 1 choice (kernel:0)
[ KLOG]:inf: usb 1-1.4: new full speed USB device using tangox-ehci-hcd and address 4 (kernel:0)
[ KLOG]:inf: usb 1-1.4: configuration #1 chosen from 1 choice (kernel:0)
[ KLOG]:inf: ata2.00: configured for UDMA/133 (kernel:0)
[ KLOG]:inf: ata2: EH complete (kernel:0)
[ KLOG]:inf: sd 1:0:0:0: [sdb] 3907029168 512-byte hardware sectors (2000399 MB) (kernel:0)
[ KLOG]:inf: sd 1:0:0:0: [sdb] Write Protect is off (kernel:0)
[ KLOG]:inf: sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support D (kernel:0)
[ KLOG]:inf: kjournald starting. Commit interval 5 seconds (kernel:0)
[ KLOG]:inf: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended (kernel:0)
[ KLOG]:inf: EXT3 FS on sdb2, internal journal (kernel:0)
[ KLOG]:inf: EXT3-fs: recovery complete. (kernel:0)
[ KLOG]:inf: EXT3-fs: mounted filesystem with ordered data mode. (kernel:0)
[ KLOG]:inf: attempt to access beyond end of device (kernel:0)
[ KLOG]:inf: sdb6: rw=0, want=332047424, limit=332047422 (kernel:0)
[ KLOG]:inf: attempt to access beyond end of device (kernel:0)
[ KLOG]:inf: sdb6: rw=0, want=332047424, limit=332047422 (kernel:0)
[ KLOG]:inf: UDF-fs: No partition found (1) (kernel:0)
[ KLOG]:inf: kjournald starting. Commit interval 5 seconds (kernel:0)
[ KLOG]:inf: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended (kernel:0)
[ KLOG]:inf: EXT3 FS on sdb6, internal journal (kernel:0)
[ KLOG]:inf: EXT3-fs: recovery complete. (kernel:0)
[ KLOG]:inf: EXT3-fs: mounted filesystem with ordered data mode. (kernel:0)
[ KLOG]:inf: kjournald starting. Commit interval 5 seconds (kernel:0)
[ KLOG]:inf: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended (kernel:0)
[ KLOG]:inf: EXT3 FS on sdb7, internal journal (kernel:0)
[ KLOG]:inf: EXT3-fs: recovery complete. (kernel:0)
[ KLOG]:inf: EXT3-fs: mounted filesystem with ordered data mode. (kernel:0)
[ KLOG]:inf: attempt to access beyond end of device (kernel:0)
[ KLOG]:inf: sdb8: rw=0, want=3502571564, limit=3502571562 (kernel:0)
[ KLOG]:inf: attempt to access beyond end of device (kernel:0)
[ KLOG]:inf: sdb8: rw=0, want=3502571564, limit=3502571562 (kernel:0)
[ KLOG]:inf: UDF-fs: No partition found (1) (kernel:0)
[ KLOG]:inf: kjournald starting. Commit interval 5 seconds (kernel:0)
[ KLOG]:inf: EXT3-fs: mounted filesystem with ordered data mode. (kernel:0)
[ KLOG]:inf: ata1.00: configured for UDMA/133 (kernel:0)
[ KLOG]:inf: ata1: EH complete (kernel:0)
[ KLOG]:inf: sd 0:0:0:0: [sda] 3907029168 512-byte hardware sectors (2000399 MB) (kernel:0)
[ KLOG]:inf: sd 0:0:0:0: [sda] Write Protect is off (kernel:0)
[ KLOG]:inf: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support D (kernel:0)
[ KLOG]:inf: kjournald starting. Commit interval 5 seconds (kernel:0)
[ KLOG]:inf: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended (kernel:0)
[ KLOG]:inf: EXT3 FS on sda2, internal journal (kernel:0)
[ KLOG]:inf: EXT3-fs: recovery complete. (kernel:0)
[ KLOG]:inf: EXT3-fs: mounted filesystem with ordered data mode. (kernel:0)
[ KLOG]:inf: kjournald starting. Commit interval 5 seconds (kernel:0)
[ KLOG]:inf: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended (kernel:0)
[ KLOG]:inf: EXT3 FS on sda5, internal journal (kernel:0)
[ KLOG]:inf: EXT3-fs: recovery complete. (kernel:0)
[ KLOG]:inf: EXT3-fs: mounted filesystem with ordered data mode. (kernel:0)
[ KLOG]:inf: attempt to access beyond end of device (kernel:0)
[ KLOG]:inf: sda6: rw=0, want=332047424, limit=332047422 (kernel:0)
[ KLOG]:inf: attempt to access beyond end of device (kernel:0)
[ KLOG]:inf: sda6: rw=0, want=332047424, limit=332047422 (kernel:0)
[ KLOG]:inf: UDF-fs: No partition found (1) (kernel:0)
[ KLOG]:inf: kjournald starting. Commit interval 5 seconds (kernel:0)
[ KLOG]:inf: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended (kernel:0)
[ KLOG]:inf: EXT3 FS on sda6, internal journal (kernel:0)
[ KLOG]:inf: EXT3-fs: recovery complete. (kernel:0)
[ KLOG]:inf: EXT3-fs: mounted filesystem with ordered data mode. (kernel:0)
[ KLOG]:inf: kjournald starting. Commit interval 5 seconds (kernel:0)
[ KLOG]:inf: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended (kernel:0)
[ KLOG]:inf: EXT3 FS on sda7, internal journal (kernel:0)
[ KLOG]:inf: EXT3-fs: recovery complete. (kernel:0)
[ KLOG]:inf: EXT3-fs: mounted filesystem with ordered data mode. (kernel:0)
[ KLOG]:inf: attempt to access beyond end of device (kernel:0)
[ KLOG]:inf: sda8: rw=0, want=3502571564, limit=3502571562 (kernel:0)
[ KLOG]:inf: attempt to access beyond end of device (kernel:0)
[ KLOG]:inf: sda8: rw=0, want=3502571564, limit=3502571562 (kernel:0)
[ KLOG]:inf: UDF-fs: No partition found (1) (kernel:0)
[ KLOG]:inf: kjournald starting. Commit interval 5 seconds (kernel:0)
[ KLOG]:inf: EXT3-fs: mounted filesystem with ordered data mode. (kernel:0)
[ KLOG]:inf: em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/buil (kernel:0)
[ KLOG]:inf: em8xxx0 [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/bui (kernel:0)
[ KLOG]:inf: em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/buil (kernel:0)
[ KLOG]:inf: em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/buil (kernel:0)
[ KLOG]:inf: mumk_register_tasklet: (0) tasklet c0098000 status @c0282ad4 (kernel:0)
[ KLOG]:inf: em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/buil (kernel:0)
[ KLOG]:inf: em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/buil (kernel:0)
[ KLOG]:inf: em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/buil (kernel:0)
[ KLOG]:inf: em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/buil (kernel:0)
[ KLOG]:inf: em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/buil (kernel:0)
[ KLOG]:inf: em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/buil (kernel:0)
[ KLOG]:inf: em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/buil (kernel:0)
[ KLOG]:inf: em8xxx [/home/yamaha/spr_trunk/yamaha/doc/release/make_update_package/v362/buil (kernel:0)
[ KLOG]:inf: Initializing USB Mass Storage driver... (kernel:0)
[ KLOG]:inf: usbcore: registered new interface driver usb-storage (kernel:0)
[ KLOG]:inf: USB Mass Storage support registered. (kernel:0)
[ KLOG]:inf: usbcore: registered new interface driver usbserial (kernel:0)
[ KLOG]:inf: drivers/usb/serial/usb-serial.c: USB Serial Driver core (kernel:0)
[ KLOG]:inf: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Ser (kernel:0)
[ KLOG]:inf: ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected (kernel:0)
[ KLOG]:inf: drivers/usb/serial/ftdi_sio.c: Detected FT2232C (kernel:0)
[ KLOG]:inf: drivers/usb/serial/ftdi_sio.c: Number of endpoints 2 (kernel:0)
[ KLOG]:inf: drivers/usb/serial/ftdi_sio.c: Endpoint 1 MaxPacketSize 64 (kernel:0)
[ KLOG]:inf: drivers/usb/serial/ftdi_sio.c: Endpoint 2 MaxPacketSize 64 (kernel:0)
[ KLOG]:inf: drivers/usb/serial/ftdi_sio.c: Setting MaxPacketSize 64 (kernel:0)
[ KLOG]:inf: usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB0 (kernel:0)
[ KLOG]:inf: ftdi_sio 1-1.4:1.1: FTDI USB Serial Device converter detected (kernel:0)
[ KLOG]:inf: drivers/usb/serial/ftdi_sio.c: Detected FT2232C (kernel:0)
[ KLOG]:inf: drivers/usb/serial/ftdi_sio.c: Number of endpoints 2 (kernel:0)
[ KLOG]:inf: drivers/usb/serial/ftdi_sio.c: Endpoint 1 MaxPacketSize 64 (kernel:0)
[ KLOG]:inf: drivers/usb/serial/ftdi_sio.c: Endpoint 2 MaxPacketSize 64 (kernel:0)
[ KLOG]:inf: drivers/usb/serial/ftdi_sio.c: Setting MaxPacketSize 64 (kernel:0)
[ KLOG]:inf: usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB1 (kernel:0)
[ KLOG]:inf: usbcore: registered new interface driver ftdi_sio (kernel:0)
[ KLOG]:inf: drivers/usb/serial/ftdi_sio.c: v1.5.0:USB FTDI Serial Converters Driver (kernel:0)
[ KLOG]:inf: usbcore: registered new interface driver snd-usb-audio (kernel:0)
[ KLOG]:inf: drivers/usb/serial/usb-serial.c: USB Serial support registered for cp2101 (kernel:0)
[ KLOG]:inf: usbcore: registered new interface driver cp2101 (kernel:0)
[ KLOG]:inf: {CP2101}: cp2101.c Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0.07 (kernel:0)
[ KLOG]:inf: PCI: Enabling device 0000:00:03.0 (0000 -> 0002) (kernel:0)
[ KLOG]:inf: PCI: Enabling device 0000:00:02.0 (0000 -> 0002) (kernel:0)
[ KLOG]:inf: usb 2-2: USB disconnect, address 2 (kernel:0)
[ KLOG]:inf: rtc_r2025_mod rtc_r2025_mod.0: rtc core: registered rtc_r2025_mod as rtc0 (kernel:0)
[ KLOG]:err: rtc_r2025_mod rtc_r2025_mod.0: retrieved date/time is not valid. (kernel:0)
[ KLOG]:inf: kjournald starting. Commit interval 5 seconds (kernel:0)
[ KLOG]:inf: EXT3 FS on sdb5, internal journal (kernel:0)
[ KLOG]:inf: EXT3-fs: mounted filesystem with ordered data mode. (kernel:0)
[ KLOG]:err: rtc_r2025_mod rtc_r2025_mod.0: retrieved date/time is not valid. (kernel:0)
[ ASE]:inf: STOM Initialize OK (ase_ac.c:1073)
[ DDM]:inf: HDD Priority boot=30 Rev:A=0003 B=0003 (ddmstatus.c:1300)
[ DDM]:inf: Release: MST:A=3508 B=3508 SUB:A=-1 B=2040 EXP:A=46 B=46 (ddmdev.c:931)
[ ASE]:inf: DDMIO Initialize OK (ase_ac.c:1073)
[ DDM]:err: no such file 1027.1 (ddmfsm.c:411)
[ ASE]:inf: FEM Initialize OK (ase_ac.c:1073)
[ ASE]:inf: SAS Initialize OK (ase_ac.c:1073)
[ ASE]:inf: DDMLOG Initialize OK (ase_ac.c:1073)
[ ASE]:inf: AC boot (ase_ac.c:1083)
[ PNLM]:inf: panel firm: 100.10(id=0) (pnlm.c:180)
[ PNLM]:inf: [Panel F/W] file:v115 panel:v115 (pnlm_watch.c:204)
[ ASE]:inf: * system version: 3.77 (ase.c:192)
[ ASE]:inf: PNLM Initialize OK (ase_ac.c:1073)
[ ASE]:inf: STOM Initialize OK (ase_ac.c:1073)
[ ASE]:inf: SPNX Initialize OK (ase_ac.c:1073)
[ ASE]:inf: TG Initialize OK (ase_ac.c:1073)
[ ASE]:inf: DAVP Initialize OK (ase_ac.c:1073)
[ DDM]:err: no such file 1.2037 (ddmfsm.c:411)
[ DDM]:err: no such file 100.2051 (ddmfsm.c:411)
[ HDMIM]:inf: SMP_HDCP:HardwareHDCP (hdmi.c:543)
[ HDMIM]:inf: NoHDMIOutput (hdmimain.c:326)
SYSTEM:ERROR:RUA splash screen clean up error 9
DEBUG ACTIVE MODULES: ALL
DEBUG ACTIVE LEVELS: CODE_ISSUE DATA_ISSUE FATAL UNEXPECTED
[ SCR]:inf: RUAGetAvailableMemory : DRAM#0 err = 6 FreeSize = 77023696 (scrinit.c:2694)
[ SCR]:inf: RUAGetAvailableMemory : DRAM#1 err = 6 FreeSize = 7895260 (scrinit.c:2696)
[ SCR]:inf: Before scrInitTelopPlane (scrinit.c:2700)
[ SCR]:inf: Before scrInitMainVideo (scrinit.c:2702)
[ SCR]:inf: Before scrInitMixer (scrinit.c:2704)
[ SCR]:inf: Before scrInitBackgroundEqOSD (scrinit.c:2706)
[ SCR]:inf: Before scrAddSecOSDMixer (scrinit.c:2708)
[ SCR]:inf: Before scrInitContentsPlane (scrinit.c:2710)
[ SCR]:inf: Before scrSetMixerMisc (scrinit.c:2712)
[ SCR]:inf: Before LayerOrder (scrinit.c:1022)
[ SCR]:inf: Before Mixer Validate (scrinit.c:1026)
[ SCR]:inf: Before Mixer Enable (scrinit.c:1029)
[ SCR]:inf: Before MixerSourceWindow (scrinit.c:1034)
[ SCR]:inf: Telop Plane=1 FrameBuffer=0x33172f9c BytePitch=5120 (scrinit.c:1049)
[ SCR]:inf: Contents2 Plane=2 FrameBuffer=0x34306f9c (scrinit.c:1050)
[ SCR]:inf: Plane=3 FrameBuffer=0x35900174 BytePitch=15360 (scrinit.c:1060)
[ SCR]:inf: Before scrSetMixerMasterSync (scrinit.c:2716)
[ SCR]:inf: Size=5199988 DRAM#1 Addr=cec9202c[h] for GP1 static capture memory (scrinit.c:2796)
[ SCR]:inf: RUAGetAvailableMemory : DRAM#0 FreeSize = 69645484 (scrinit.c:2812)
[ SCR]:inf: RUAGetAvailableMemory : DRAM#1 FreeSize = 2695272 (scrinit.c:2814)
[ SCR]:inf: end scrInitialize (scrinit.c:2815)
[ ASE]:inf: SCR Initialize OK (ase_ac.c:1073)
[ ASE]:inf: AVM Initialize OK (ase_ac.c:1073)
[ ASE]:inf: DMK Initialize OK (ase_ac.c:1073)
[ ZBDMK]:inf: pairingNumCtrlParse ok [3] (zbdenmoku.c:6630)
[ ZBDMK]:inf: Client Number : 3 (zbdenmoku.c:6746)
[ ASE]:inf: ZBDMK Initialize OK (ase_ac.c:1073)
[ ASE]:inf: TMPM Initialize OK (ase_ac.c:1073)
[ ASE]:inf: PDEV Initialize OK (ase_ac.c:1073)
[ ASE]:inf: CDBURN Initialize OK (ase_ac.c:1073)
[ ASE]:inf: LOGF Initialize OK (ase_ac.c:1073)
[ ASE]:inf: LOCK Initialize OK (ase_ac.c:1073)
[ DDM]:err: ddmLoadEEPROM:EEPROM format NG. (ddmstatus.c:524)
[ENVPRM]:inf: create ok(/SPR/HDA/WORK/defprm.ini) (envprm.c:177)
[ENVPRM]:inf: end of file (envprm_default.c:1079)
[ ASE]:inf: ENVPRM Initialize OK (ase_ac.c:1073)
[ ASE]:inf: COIN Initialize OK (ase_ac.c:1073)
[ KLOG]:err: rtc_r2025_mod rtc_r2025_mod.0: retrieved date/time is not valid. (kernel:0)
[ ASE]:inf: EMTVS Initialize OK (ase_ac.c:1073)
[ ASE]:inf: MIDISF Initialize OK (ase_ac.c:1073)
[ ASE]:inf: SNG Initialize OK (ase_ac.c:1073)
[ ASE]:inf: SNGR Initialize OK (ase_ac.c:1073)
[ ASE]:inf: OSD Initialize OK (ase_ac.c:1073)
[ ASE]:inf: SAE Initialize OK (ase_ac.c:1073)
[ ASE]:inf: SVM Initialize OK (ase_ac.c:1073)
[ ASE]:inf: DSEC Initialize OK (ase_ac.c:1073)
[ AVPL]:inf: AV Player v3.01 (CAVPlayerInterface.cpp:
[ ASE]:inf: AVA Initialize OK (ase_ac.c:1073)
[ ASE]:inf: SAITEN Initialize OK (ase_ac.c:1073)
[ ASE]:inf: KPL Initialize OK (ase_ac.c:1073)
[ MPL]:inf: Media Player v1.11 (mpl_fsm.c:580)
[ ASE]:inf: MPL Initialize OK (ase_ac.c:1073)
[ ASE]:inf: KPSE Initialize OK (ase_ac.c:1073)
[ ASE]:inf: CUI Initialize OK (ase_ac.c:1073)
[ KRBSV]:inf: INIT: evaluate info. (krbsv.c:2188)
[ ASE]:inf: KRB Initialize OK (ase_ac.c:1073)
[ ASE]:inf: VCMGR Initialize OK (ase_ac.c:1073)
[ ASE]:inf: ECONF Initialize OK (ase_ac.c:1073)
[ ASE]:inf: SAF Initialize OK (ase_ac.c:1073)
[ ASE]:inf: UMSG Start OK (ase_ac.c:1111)
[ KSV]:inf: pairingNumCtrlParse ok [ds:6 smartphone:1] (ksv_master.c:181)
[ KSV]:inf: Client Number [ds:7 proxy:2] (ksv_master.c:221)
[ STPDC]:inf: [API] STPDC lib version: 1.0.0.0 (2013/12/17) (stpdc.c:294)
[ KSV]:inf: stpdcInitialize OK (ksv_telop_data.c:822)
[ KSV]:inf: ksv master thread start (ksv_master.c:2212)
[DS2FTP]:inf: pairingNumCtrlParse ok [6] (ds2ftp_master.c:443)
[DS2FTP]:inf: Client Number : 6 (ds2ftp_master.c:654)
[ HTTPC]:inf: SSL_library_init OK (hcssl.c:218)
[ SSHC]:inf: libssh2_version [1.4.3] (ssh_client.c:55)
[ ASE]:inf: NETi Start OK (ase_ac.c:1111)
[ ASE]:inf: NETs Start OK (ase_ac.c:1111)
[ HDMIM]:inf: MAN HP 0 HDCP 0 (hdmimain.c:896)
[ENVPRM]:inf: /SPR/HDD/WORK/envprm.csv not open (envprm_default.c:623)
[ ASE]:inf: * [MNT] IDLE -> POWER OFF (ase_maintenance.c:2581)
[ KLOG]:inf: eth0: link down (kernel:0)
[ DDM]:err: (100.573) not updatable:common head rev 1->1 (ddmfsm.c:683)
[ DDM]:err: (100.606) not updatable:common head rev 1->1 (ddmfsm.c:683)
[ DDM]:err: (100.608) not updatable:common head rev 1->1 (ddmfsm.c:683)
[ ASE]:inf: * FadeOut Mode(L2): NON -> NON (ase_fadeout.c:553)
[ ASE]:inf: Power Off (ase.c:1470)
[ ASE]:inf: * change status [IDLE] -> [POWER OFF] (ase.c:5313)
[ ASE]:inf: - Accept PowerOn(POFF -> PON) (ase_power.c:1925)
[ PNLM]:inf: pnlmCmdCalibSet call (xscale:-233 yscale:-163 xtrans:839 ytrans:559) (pnlm_cmd.c:373)
[ KLOG]:inf: usb 2-2: new full speed USB device using tangox-ohci-hcd and address 3 (kernel:0)
[ KLOG]:inf: usb 2-2: configuration #1 chosen from 1 choice (kernel:0)
[ ASE]:inf: : --- Sphinx Module Version -------------------- (ase_spnx.c:467)
[ ASE]:inf: : F1/KDSP Program : [1.14] (ase_spnx.c:468)
[ ASE]:inf: : MMT Program : [1.03] (ase_spnx.c:469)
[ ASE]:inf: : Boot : [1.00] (ase_spnx.c:470)
[ ASE]:inf: : Loader : [1.00] (ase_spnx.c:471)
[ ASE]:inf: : Waveform : [1.01] (ase_spnx.c:472)
[ ASE]:inf: : Wave ALL : [1.00 ] (ase_spnx.c:473)
[ ECONF]:inf: ChargeMode [PULSE] (econf.c:270)
[ OKDPL]:inf: TG Scr Hash (dev=0, port=0):CRC=013B, orgCRC=013B, (1, 168) (ymh_tgmgr.c:1084)
[ OKDPL]:inf: TG Scr Hash (dev=0, port=1):CRC=6A1D, orgCRC=6A1D, (0, 242) (ymh_tgmgr.c:1084)
[ OKDPL]:inf: TG Scr Hash (dev=1, port=0):CRC=3B32, orgCRC=3B32, (0, 248) (ymh_tgmgr.c:1084)
[ OKDPL]:inf: TG Scr Hash (dev=1, port=1):CRC=71B7, orgCRC=71B7, (0, 177) (ymh_tgmgr.c:1084)
[ OKDPL]:inf: TG Scr Hash (dev=2, port=0):CRC=1478, orgCRC=1478, (0, 144) (ymh_tgmgr.c:1084)
[ ECONF]:inf: Hardware ID: 0 (econf_model.c:142)
[ DDM]:err: no such file 1.2035 (ddmfsm.c:411)
[ENVPRM]:inf: /SPR/HDD/WORK/envprm.csv not open (envprm_default.c:623)
[ ASE]:inf: - Began to Update Data (ase_net.c:2310)
[ FEM]:err: HDD CRACKED.(4864) (FsEvtMgr.c:2054)
[ ASE]:inf: - Ended to Update Data (ase_net.c:2313)
[ SNGR]:inf: * change status [IDLE] -> [STANDBY] (sngr_thr.c:917)
[ AVPL]:inf: #1> receive event <OPEN> on [NOEXIST] (CAVPlayer.cpp:346)
[ DCCHD]:inf: DCCHD: No HDCP SRM file found. (src/CPlaybackControl.cp
DEBUG ACTIVE MODULES: ALL
DEBUG ACTIVE LEVELS: CODE_ISSUE DATA_ISSUE FATAL UNEXPECTED
[ DCCHD]:inf: ALLOC 19_DRAM SCHEDULER MEMORY addr=0x83794ca4 size=0xf4! (src/CPresEng.cpp:7511)
[ AVPL]:inf: #1> state [NOEXIST] -> [OPENED] (CAVPlayer.cpp:359)
[ AVPL]:inf: #01> /SPR/HDB/MDP/Data/1015/1015.2101,16,-1,97503,998403,0,0,1; (CAVPlayerInterface.cpp:
[ AVPL]:inf: #1> receive event <ATTACH> on [OPENED] (CAVPlayer.cpp:346)
[ AVPL]:inf: #1> attach playlist : #01 (CAVPlayerInterface.cpp:
[ AVPL]:inf: #1> receive event <SETENDTIME> on [OPENED] (CAVPlayer.cpp:346)
[ MPL]:inf: mplFsmCallback : mpl callback [OPENED]. (hd = 1734700544) (mpl_fsm_proc.c:1585)
[ MPL]:inf: mplCtrl_SetVolume : hd = 1734700544, vol = 70 (mpl_ctrl.c:127)
[ MPL]:inf: mplFsmSeekStart : get AVPL resource 0x502 (hd = 1734700544, avpl_hd = 1) (mpl_fsm_proc.c:1161)
[ AVPL]:inf: #1> receive event <SEEK> on [OPENED] (CAVPlayer.cpp:346)
[ AVPL]:inf: total number of seeks : 1 (CAVPlayer.cpp:1027)
[ AVPL]:inf: #1> state [OPENED] -> [SEEKING] (CAVPlayer.cpp:359)
[ AVPL]:inf: heartbeat: dmx0=1, dmx1=1, mpg=1, aud=1, ipu=1, ih=1 (CAvplPresEng.cpp:1260)
[ DCCHD]:inf: DCCHD0 -------------------------- CC hard ----------------------- 46 (src/CPresEngCC.cpp:705)
[ DCCHD]:inf: DCCHD# - ConfigureAudioEngine: Configure engine [0x1B] - seamlessPara (src/CPresEngConfig.cpp:
[ DCCHD]:inf: DCCHD# - ConfigureAudioEngine: Configure engine [0x1B] - seamlessPara (src/CPresEngConfig.cpp:
[ DCCHD]:inf: DCCHD# - ConfigureAudioEngine: Configure engine [0x1B] - seamlessPara (src/CPresEngConfig.cpp:
[ DCCHD]:inf: DCCHD0 === --- INB CMD - mID=300, mask=0x00000008 [index=6] (src/CPresEng.cpp:6406)
[ DCCHD]:inf: DCCHD0 === --- INB CMD - mID=26, mask=0x00000008 [index=7] (src/CPresEng.cpp:6406)
[ DCCHD]:inf: DCCHD0 === --- No media info available!!! (src/CPresEng.cpp:6921)
[ DCCHD]:inf: DCCHD0 === --- INB CMD - mID=3, mask=0x00020000 [index=5] (src/CPresEng.cpp:6406)
[ AVPL]:inf: #1> receive event <STANDBY> on [SEEKING] (CAVPlayer.cpp:346)
[ AVPL]:inf: #1> state [SEEKING] -> [STANDBY] (CAVPlayer.cpp:359)
[ MPL]:inf: mplFsmCallback : mpl callback [STANDBY]. (hd = 1734700544) (mpl_fsm_proc.c:1585)
[ DCCHD]:inf: DCCHD0 === --- No media info available!!! (src/CPresEng.cpp:6921)
[ AVPL]:inf: #1> receive event <START> on [STANDBY] (CAVPlayer.cpp:346)
[ DCCHD]:inf: DCCHD# - ConfigureAudioEngine: Configure engine [0x1B] - seamlessPara (src/CPresEngConfig.cpp:
[ AVPL]:inf: #1> state [STANDBY] -> [PLAYING] (CAVPlayer.cpp:359)
[ AVPL]:inf: #1> receive event <GETCLOCK> on [PLAYING] (CAVPlayer.cpp:346)
[ DCCHD]:inf: DCCHD0 === --- Old audio decoder (engine 0, ID 0) info: Valid: 0, D (src/CPresEng.cpp:6238)
[ DCCHD]:inf: DCCHD0 === --- Old audio decoder info: 0.0 0 Hz (0) (src/CPresEng.cpp:6239)
[ DCCHD]:inf: DCCHD0 === --- GroupID[1] New audio decoder (engine 0, ID 3) info: (src/CPresEng.cpp:6249)
[ DCCHD]:inf: DCCHD0 === --- GroupID[1] New audio decoder info: 2.0 48000 Hz (2) (src/CPresEng.cpp:6250)
[ OSD]:inf: osdResOpenResource : 1015.1201 (osdrman.c:244)
[ DCCHD]:inf: DCCHD0 === --- Media info: 2.0 48000 Hz (2), alt: 0.0 0 Hz (0) (src/CPresEng.cpp:7089)
[ OSD]:inf: osdResOpenResource : 1015.1202 (osdrman.c:244)
[ OSD]:inf: osdResOpenResource : 1015.1203 (osdrman.c:244)
[ OSD]:inf: osdResOpenResource : 1015.1204 (osdrman.c:244)
[ OSD]:inf: osdResOpenResource : 1015.1205 (osdrman.c:244)
[ DDM]:err: no such file 117.800 (ddmfsm.c:411)
[ DDM]:err: no such file 117.801 (ddmfsm.c:411)
[ NBBTI]:inf: New BB total Info file is not found (NewBBTotalInfo.c:178)
[ SNG]:inf: Load Lib Name:SeimitsuDX (sng.c:2523)
[ SNG]:inf: Song Num :8100-21 (sng.c:2525)
[ SNG]:inf: Cnt ID:194 CoinB:0 KKS:0 Direct:1 (sng.c:2528)
[ SNG]:inf: Rsv Mask:1 Interrpt:1 Poff:0 (sng.c:2530)
[ SNG]:inf: Rsvd Poff:1 Cancel:1 Suspend:1 (sng.c:2533)
[ SNG]:inf: Play Poff:1 Alt:1 Suspend:1 VChange:1 (sng.c:2536)
[ SNG]:inf: Load Lib Name:Kouhaku (sng.c:2523)
[ SNG]:inf: Song Num :8100-25 (sng.c:2525)
[ SNG]:inf: Cnt ID:804 CoinB:0 KKS:0 Direct:1 (sng.c:2528)
[ SNG]:inf: Rsv Mask:1 Interrpt:1 Poff:0 (sng.c:2530)
[ SNG]:inf: Rsvd Poff:1 Cancel:1 Suspend:1 (sng.c:2533)
[ SNG]:inf: Play Poff:1 Alt:1 Suspend:1 VChange:1 (sng.c:2536)
[ SNG]:inf: Load Lib Name:SaitenOwari (sng.c:2523)
[ SNG]:inf: Song Num :8100-99 (sng.c:2525)
[ SNG]:inf: Cnt ID:820 CoinB:0 KKS:0 Direct:1 (sng.c:2528)
[ SNG]:inf: Rsv Mask:1 Interrpt:1 Poff:0 (sng.c:2530)
[ SNG]:inf: Rsvd Poff:1 Cancel:1 Suspend:1 (sng.c:2533)
[ SNG]:inf: Play Poff:1 Alt:1 Suspend:1 VChange:1 (sng.c:2536)
[ PKMF]:err: PreKaraokeMsg : file not found (962.100) (PreKaraokeMsg.c:175)
[ DCCHD]:inf: DCCHD0 === --- INB CMD - mID=300, mask=0x00000008 [index=9] (src/CPresEng.cpp:6406)
[ DCCHD]:inf: DCCHD0 === --- INB CMD - mID=26, mask=0x00000008 [index=9] (src/CPresEng.cpp:6406)
[ DCCHD]:inf: DCCHD0 === --- INB CMD - mID=3, mask=0x00020000 [index=8] (src/CPresEng.cpp:6406)
[ AVPL]:inf: #1> receive event <SEQEND> on [PLAYING] (CAVPlayer.cpp:346)
[ AVPL]:inf: #1> state [PLAYING] -> [STANDBY] (CAVPlayer.cpp:359)
[ AVPL]:inf: #1> receive event <STOP> on [STANDBY] (CAVPlayer.cpp:346)
[ DCCHD]:inf: DCCHD0 ################: free address 0xCF1878AC (src/CPresEngCC.cpp:818)
[ DCCHD]:inf: DCCHD0 ################: free address 0x84D4EEA8 (src/CPresEngVideo.cpp:2
[ DCCHD]:inf: DCCHD0 Audio_CloseDecoder: Close Decoder ID=28 (src/CPresEngConfig.cpp:
[ DCCHD]:inf: DCCHD0 ################: free address 0xCF1C7CAC, MMAP=0x08BB6014 (src/CPresEngConfig.cpp:
[ DCCHD]:inf: DCCHD0 ################: free address 0x84A92D58 (src/CPresEngDemux.cpp:2
[ DCCHD]:inf: DCCHD0 ################: free address 0x849A0AA8 (src/CPresEngDemux.cpp:2
[ AVPL]:inf: #1> state [STANDBY] -> [OPENED] (CAVPlayer.cpp:359)
[ MPL]:inf: mplFsmSongEnd : release AVPL resource : 0x502 (hd = 1734700544, avpl_hd = 1) (mpl_fsm_proc.c:1437)
[ MPL]:inf: mplFsmCallback : mpl callback [NORMALEND]. (hd = 1734700544) (mpl_fsm_proc.c:1585)
[ AVPL]:inf: #1> receive event <DETACH> on [OPENED] (CAVPlayer.cpp:346)
[ AVPL]:inf: #1> detach playlist (CAVPlayerInterface.cpp:
[ AVPL]:inf: #1> receive event <CLOSE> on [OPENED] (CAVPlayer.cpp:346)
[ DCCHD]:inf: FREE 0_DRAM VIDEO SHARED MEMORY addr=0x836fec98 size=0x96000! (src/CPresEng.cpp:7622)
[ DCCHD]:inf: FREE 19_DRAM SCHEDULER MEMORY addr=0x83794ca4 size=0xf4! (src/CPresEng.cpp:7645)
[ AVPL]:inf: #1> state [OPENED] -> [NOEXIST] (CAVPlayer.cpp:359)
[ CMENG]:err: Node File No Exist (1063, 30050) (cmeUtility.cpp:982)
[ CMENG]:err: Node File No Exist (1063, 30050) (cmeUtility.cpp:982)
[ CMP]:inf: createInstance (./app/cm_dlsym.c:45)
[ CMENG]:err: Node File No Exist (1063, 30050) (cmeUtility.cpp:982)
[ CMP]:inf: checkCmFileRevision : update 1063.1 (Rev.328) (./app/cm_com.c:425)
[ CMP]:inf: checkCmFileRevision : update 100.467 (Rev.1) (./app/cm_com.c:425)
[ CMP]:inf: checkCmFileRevision : update 100.2001 (Rev.551) (./app/cm_com.c:425)
[ CMP]:inf: checkCmFileRevision : update 100.468 (Rev.1) (./app/cm_com.c:425)
[ CMP]:inf: checkCmFileRevision : update 1263.1 (Rev.325) (./app/cm_com.c:425)
[ CMENG]:err: Node File No Exist (1063, 30050) (cmeUtility.cpp:982)
[ CMP]:inf: checkCmFileRevision : DAM-CH(AUTO) Root connector reload (./app/cm_com.c:456)
[ ECONF]:inf: econfCmTypeGet ECONF v[DAM_CH] m[DAM_CH] (econf_cm_mng.c:1047)
[ ECONF]:inf: setDamChannelEnkaEnable DAM-CH(enka) [ENABLE] (econf_cm_mng.c:807)
[ CMP]:inf: boot judge OK (bgv:8) (./bgv/cmv_thr.c:321)
[ CMP]:inf: cmEraseNotify : call eEVTM_APP_NOTIFY_ID_ERASE_PICTURE. (./app/cm_com.c:3183)
[ CMP]:inf: dispOpen (./bgv/cmv_pvcm.c:209)
[ CMP]:inf: * /tango/sdk/yamaha/app/subapp/libPromo.so loaded (./bgv/cmv_pvcm.c:229)
[ CMENG]:inf: Transition Control Success (INITIALIZE) [NOEXIST] --> [EXIST] (cmeUtility.cpp:1222)
[ CMENG]:inf: Transition Control Success (OPEN) [EXIST] --> [OPENED] (cmeUtility.cpp:1222)
[ CMP]:inf: boot judge OK (bgm:0) (./bgm/cmm_thr.c:591)
[ CMP]:inf: dispOpen (./bgm/cmm_off.c:52)
[ CMENG]:inf: Transition Control Success (READY) [OPENED] --> [STANDBY] (cmeUtility.cpp:1222)
[CMPROM]:inf: Load Original File List Invalid (MegaBox Flag OFF) (proCOriginal.cpp:131)
[ ECONF]:inf: cont play-count clear (econf_cm_mng.c:1693)
[CMPROM]:inf: Select mode=2(normal:0,enka:0) (proCDamChannel.cpp:474)
[CMPROM]:inf: Set PlayMode=2 (proCDamChannel.cpp:505)
[CMPROM]:inf: DAM Channnel Next Node (-1--1) --> (1063-1) (proCDamChannel.cpp:659)
[CMPROM]:inf: DAM Channnel Next Node (1063-1) --> (1063-30001) (proCDamChannel.cpp:659)
[ CMENG]:inf: Media Player Open: File (1063-30001) (cmeExClass.cpp:799)
[ AVPL]:inf: #1> receive event <OPEN> on [NOEXIST] (CAVPlayer.cpp:346)
[ DCCHD]:inf: DCCHD: No HDCP SRM file found. (src/CPlaybackControl.cp
DEBUG ACTIVE MODULES: ALL
DEBUG ACTIVE LEVELS: CODE_ISSUE DATA_ISSUE FATAL UNEXPECTED
[ DCCHD]:inf: ALLOC 19_DRAM SCHEDULER MEMORY addr=0x80dece48 size=0xf4! (src/CPresEng.cpp:7511)
[ AVPL]:inf: #1> state [NOEXIST] -> [OPENED] (CAVPlayer.cpp:359)
[ AVPL]:inf: #01> /SPR/HDB/TDP/Data/1063/1063.30001,16,-1,89910,17747550,0,0,1; (CAVPlayerInterface.cpp:
[ AVPL]:inf: #1> receive event <ATTACH> on [OPENED] (CAVPlayer.cpp:346)
[ AVPL]:inf: #1> attach playlist : #01 (CAVPlayerInterface.cpp:
[ AVPL]:inf: #1> receive event <SETENDTIME> on [OPENED] (CAVPlayer.cpp:346)
[ MPL]:inf: mplFsmCallback : mpl callback [OPENED]. (hd = 1734700544) (mpl_fsm_proc.c:1585)
[ CMENG]:inf: Player CallBack Event (0) (cmeExClass.cpp:684)
[ ASE]:inf: * [MNT] POWER OFF -> NRM_WATCH (ase_maintenance.c:2581)
[ ASE]:inf: * change status [POWER OFF] -> [PRE POWER ON] (ase.c:5313)
[ ECONF]:inf: econfCmDetectSet AVM [0x03] v[INNER] m[INNER] (econf_cm_mng.c:953)
[ SCR]:inf: Entry scrHold VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV (scrhold.c:1942)
[ SCR]:inf: AUX[4] CurrentConnect=0 when Hold timing (scrhold.c:469)
[ SCR]:inf: End scrHold (scrhold.c:2011)
[ KLOG]:err: rtc_r2025_mod rtc_r2025_mod.0: retrieved date/time is not valid. (kernel:0)
[ SCR]:inf: Entry scrUnhold============================ (scrhold.c:2043)
[ SCR]:inf: ======================= End scrUnhold() (scrhold.c:2107)
[ ASE]:inf: - Accept Music-Stop (ApologizeMsg:OK) (ase_load.c:2344)
[ SCR]:inf: Entry scrHold VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV (scrhold.c:1942)
[ SCR]:inf: AUX[4] CurrentConnect=0 when Hold timing (scrhold.c:469)
[ SCR]:inf: End scrHold (scrhold.c:2011)
[ SCR]:inf: Entry scrUnhold============================ (scrhold.c:2043)
[ SCR]:inf: ======================= End scrUnhold() (scrhold.c:2107)
Raw
fdisk HDD-A
Command (m for help): p
Disk /dev/sda: 1.82 TiB, 2000398934016 bytes, 3907029168 sectors
Disk model: 722T2TALA604
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xaede6d09
Device Boot Start End Sectors Size Id Type
/dev/sda1 63 58621184 58621122 28G 83 Linux
/dev/sda2 58621185 63537074 4915890 2.3G 83 Linux
/dev/sda3 * 63537075 65529134 1992060 972.7M 83 Linux
/dev/sda4 65529135 3907024064 3841494930 1.8T 5 Extended
/dev/sda5 65529198 70428959 4899762 2.3G 83 Linux
/dev/sda6 70429023 402476444 332047422 158.3G 83 Linux
/dev/sda7 402476508 404452439 1975932 964.8M 83 Linux
/dev/sda8 404452503 3907024064 3502571562 1.6T 83 Linux
Raw
sda5
hiromitu@raspberrypi:/media/hiromitu/0823c93d-8b5f-433e-943e-ba6ef1ff5dec $ find
.
./dcchd_build
./dcchd_build/DCCHD.flags.env
./dcchd_build/trun.env
./dcchd_build/DCCHD.env
./dcchd_build/sigmadfbrc
./dcchd_build/directfbrc
./dcchd_build/directfb
./dcchd_build/directfb/lib
./dcchd_build/directfb/lib/libdirect-1.0.so.0.0
./dcchd_build/directfb/lib/libfusion-1.0.so.0
./dcchd_build/directfb/lib/libfusion.so
./dcchd_build/directfb/lib/pkgconfig
./dcchd_build/directfb/lib/pkgconfig/direct.pc
./dcchd_build/directfb/lib/pkgconfig/fusion.pc
./dcchd_build/directfb/lib/pkgconfig/directfb-internal.pc
./dcchd_build/directfb/lib/pkgconfig/directfb.pc
./dcchd_build/directfb/lib/libdirectfb.so
./dcchd_build/directfb/lib/libdirectfb-1.0.so.0.0
./dcchd_build/directfb/lib/libdirect.so
./dcchd_build/directfb/lib/libdirectfb-1.0.so.0
./dcchd_build/directfb/lib/libdirect-1.0.so.0
./dcchd_build/directfb/lib/libfusion-1.0.so.0.0
./dcchd_build/shared.env
./dcchd_build/dcchd
./dcchd_build/dcchd/sdesigns_8654_iptv
./dcchd_build/dcchd/sdesigns_8654
./dcchd_build/dcchd/mono
./dcchd_build/dcchd/mono/libdcchd_lpb.so
./dcchd_build/dcchd/mono/src
./dcchd_build/dcchd/core
./dcchd_build/dcchd/core/libdcchd_core.so
./dcchd_build/dcchd/core/src
./dcchd_build/dcchd/dcchd
./dcchd_build/dcchd/dcchd/dcchdlog.cfg
./dcchd_build/dcchd/dcchd/libdcchd.so
./dcchd_build/dcchd/dcchd/src
./dcchd_build/dcchd/dcchd/ykoklog.cfg
./dcchd_build/dcchd/dtv
./dcchd_build/dcchd/dtv/hal
./dcchd_build/dcchd/dtv/hal/SAVE
./dcchd_build/dcchd/dtv/src
./dcchd_build/dcchd/dtv/network
./dcchd_build/dcchd/dtv/network/libdcchd_mcast.so
./dcchd_build/dcchd/dtv/network/ipfilter
./dcchd_build/dcchd/dtv/network/ipfilter/ipfilter.ko
./dcchd_build/dcchd/dtv/capture
./dcchd_build/dcchd/dtv/capture/libdcchd_cap.so
./dcchd_build/dcchd/dtv/tuner
./dcchd_build/dcchd/dtv/tuner/src
./dcchd_build/dcchd/dtv/tuner/include
./dcchd_build/dcchd/dtv/libdcchd_dtv.so
./empress
./empress/xtarget
./empress/xtarget/linux-mipsel
./empress/xtarget/linux-mipsel/rdbms
./empress/xtarget/linux-mipsel/rdbms/custom
./empress/xtarget/linux-mipsel/rdbms/custom/tabzero.txt
./empress/xtarget/linux-mipsel/rdbms/spool
./empress/xtarget/linux-mipsel/rdbms/spool/shm
./empress/xtarget/linux-mipsel/rdbms/spool/shm/_keep_me
./empress/xtarget/linux-mipsel/rdbms/spool/log
./empress/xtarget/linux-mipsel/rdbms/spool/log/_keep_me
./empress/xtarget/linux-mipsel/rdbms/help
./empress/xtarget/linux-mipsel/rdbms/help/english
./empress/xtarget/linux-mipsel/rdbms/help/english/cr_database
./empress/xtarget/linux-mipsel/rdbms/help/english/echo
./empress/xtarget/linux-mipsel/rdbms/help/english/comment
./empress/xtarget/linux-mipsel/rdbms/help/english/rename
./empress/xtarget/linux-mipsel/rdbms/help/english/module
./empress/xtarget/linux-mipsel/rdbms/help/english/expr
./empress/xtarget/linux-mipsel/rdbms/help/english/run
./empress/xtarget/linux-mipsel/rdbms/help/english/system
./empress/xtarget/linux-mipsel/rdbms/help/english/ia_ins
./empress/xtarget/linux-mipsel/rdbms/help/english/sort
./empress/xtarget/linux-mipsel/rdbms/help/english/scalar
./empress/xtarget/linux-mipsel/rdbms/help/english/vars
./empress/xtarget/linux-mipsel/rdbms/help/english/sys_var
./empress/xtarget/linux-mipsel/rdbms/help/english/priv
./empress/xtarget/linux-mipsel/rdbms/help/english/dcl_routine
./empress/xtarget/linux-mipsel/rdbms/help/english/insert
./empress/xtarget/linux-mipsel/rdbms/help/english/sequence
./empress/xtarget/linux-mipsel/rdbms/help/english/delete
./empress/xtarget/linux-mipsel/rdbms/help/english/trans
./empress/xtarget/linux-mipsel/rdbms/help/english/trigger
./empress/xtarget/linux-mipsel/rdbms/help/english/names
./empress/xtarget/linux-mipsel/rdbms/help/english/call
./empress/xtarget/linux-mipsel/rdbms/help/english/index
./empress/xtarget/linux-mipsel/rdbms/help/english/datatype
./empress/xtarget/linux-mipsel/rdbms/help/english/having
./empress/xtarget/linux-mipsel/rdbms/help/english/ia_alter
./empress/xtarget/linux-mipsel/rdbms/help/english/locklev
./empress/xtarget/linux-mipsel/rdbms/help/english/where
./empress/xtarget/linux-mipsel/rdbms/help/english/empty
./empress/xtarget/linux-mipsel/rdbms/help/english/store
./empress/xtarget/linux-mipsel/rdbms/help/english/create
./empress/xtarget/linux-mipsel/rdbms/help/english/help
./empress/xtarget/linux-mipsel/rdbms/help/english/update
./empress/xtarget/linux-mipsel/rdbms/help/english/hold
./empress/xtarget/linux-mipsel/rdbms/help/english/line_ed
./empress/xtarget/linux-mipsel/rdbms/help/english/schema
./empress/xtarget/linux-mipsel/rdbms/help/english/edit
./empress/xtarget/linux-mipsel/rdbms/help/english/ia_upd
./empress/xtarget/linux-mipsel/rdbms/help/english/pager
./empress/xtarget/linux-mipsel/rdbms/help/english/set
./empress/xtarget/linux-mipsel/rdbms/help/english/_dict
./empress/xtarget/linux-mipsel/rdbms/help/english/database
./empress/xtarget/linux-mipsel/rdbms/help/english/show
./empress/xtarget/linux-mipsel/rdbms/help/english/recall
./empress/xtarget/linux-mipsel/rdbms/help/english/range
./empress/xtarget/linux-mipsel/rdbms/help/english/ref_dr
./empress/xtarget/linux-mipsel/rdbms/help/english/role
./empress/xtarget/linux-mipsel/rdbms/help/english/change
./empress/xtarget/linux-mipsel/rdbms/help/english/replication
./empress/xtarget/linux-mipsel/rdbms/help/english/ref_cr
./empress/xtarget/linux-mipsel/rdbms/help/english/alter
./empress/xtarget/linux-mipsel/rdbms/help/english/start
./empress/xtarget/linux-mipsel/rdbms/help/english/ia_cr
./empress/xtarget/linux-mipsel/rdbms/help/english/view
./empress/xtarget/linux-mipsel/rdbms/help/english/select
./empress/xtarget/linux-mipsel/rdbms/help/english/drop
./empress/xtarget/linux-mipsel/rdbms/help/english/cr_table
./empress/xtarget/linux-mipsel/rdbms/help/english/report
./empress/xtarget/linux-mipsel/rdbms/help/english/display
./empress/xtarget/linux-mipsel/rdbms/exec
./empress/xtarget/linux-mipsel/rdbms/exec/empsvspooler
./empress/xtarget/linux-mipsel/rdbms/exec/empsql
./empress/xtarget/linux-mipsel/rdbms/exec/emprepsync
./empress/xtarget/linux-mipsel/rdbms/exec/emputil3
./empress/xtarget/linux-mipsel/rdbms/exec/empdblogstat
./empress/xtarget/linux-mipsel/rdbms/exec/emputil
./empress/xtarget/linux-mipsel/rdbms/exec/empsvlogstat
./empress/xtarget/linux-mipsel/rdbms/exec/empsvadmin
./empress/xtarget/linux-mipsel/rdbms/exec/emprepsv
./empress/xtarget/linux-mipsel/rdbms/exec/emputil2
./empress/xtarget/linux-mipsel/rdbms/exec/empsvserveradm
./empress/xtarget/linux-mipsel/rdbms/exec/empcnsv
./empress/xtarget/linux-mipsel/rdbms/exec/empadm
./empress/xtarget/linux-mipsel/rdbms/lib
./empress/xtarget/linux-mipsel/rdbms/lib/cnsvkernel_t.a
./empress/xtarget/linux-mipsel/rdbms/lib/utilmain.a
./empress/xtarget/linux-mipsel/rdbms/lib/sfcinfo.a
./empress/xtarget/linux-mipsel/rdbms/lib/repsrv.a
./empress/xtarget/linux-mipsel/rdbms/lib/cnsv_t.a
./empress/xtarget/linux-mipsel/rdbms/lib/logutil.a
./empress/xtarget/linux-mipsel/rdbms/lib/cnsv_sup_t.a
./empress/xtarget/linux-mipsel/rdbms/lib/mr.a
./empress/xtarget/linux-mipsel/rdbms/lib/mprun.a
./empress/xtarget/linux-mipsel/rdbms/lib/mshmadm.a
./empress/xtarget/linux-mipsel/rdbms/lib/mr_netclmain.a
./empress/xtarget/linux-mipsel/rdbms/lib/cnvtutil.a
./empress/xtarget/linux-mipsel/rdbms/lib/dt.a
./empress/xtarget/linux-mipsel/rdbms/lib/qlengine.a
./empress/xtarget/linux-mipsel/rdbms/lib/util1.a
./empress/xtarget/linux-mipsel/rdbms/lib/cnsv_sup.a
./empress/xtarget/linux-mipsel/rdbms/lib/utilapi.a
./empress/xtarget/linux-mipsel/rdbms/lib/cfadm.a
./empress/xtarget/linux-mipsel/rdbms/lib/cnsv.a
./empress/xtarget/linux-mipsel/rdbms/lib/ql.a
./empress/xtarget/linux-mipsel/rdbms/lib/sup.a
./empress/xtarget/linux-mipsel/rdbms/lib/xf.a
./empress/xtarget/linux-mipsel/rdbms/lib/odbcbcs_t.a
./empress/xtarget/linux-mipsel/rdbms/lib/xflkadm.a
./empress/xtarget/linux-mipsel/rdbms/lib/cnsvkernel.a
./empress/xtarget/linux-mipsel/rdbms/lib/xfutadm.a
./empress/xtarget/linux-mipsel/rdbms/lib/wrs.a
./empress/xtarget/linux-mipsel/rdbms/lib/ms.a
./empress/xtarget/linux-mipsel/rdbms/lib/globmain.a
./empress/xtarget/linux-mipsel/rdbms/lib/util2.a
./empress/xtarget/linux-mipsel/rdbms/lib/qlbatch.a
./empress/xtarget/linux-mipsel/rdbms/lib/mpapi.a
./empress/xtarget/linux-mipsel/rdbms/lib/small
./empress/xtarget/linux-mipsel/rdbms/lib/small/mr.a
./empress/xtarget/linux-mipsel/rdbms/lib/small/dt.a
./empress/xtarget/linux-mipsel/rdbms/lib/small/sup.a
./empress/xtarget/linux-mipsel/rdbms/lib/small/xf.a
./empress/xtarget/linux-mipsel/rdbms/lib/small/ms.a
./empress/xtarget/linux-mipsel/rdbms/lib/small/globmain.a
./empress/xtarget/linux-mipsel/rdbms/lib/small/msapi.a
./empress/xtarget/linux-mipsel/rdbms/lib/small/libbackcomp.a
./empress/xtarget/linux-mipsel/rdbms/lib/small/cxxmain.a
./empress/xtarget/linux-mipsel/rdbms/lib/utilsup.a
./empress/xtarget/linux-mipsel/rdbms/lib/libbackcomp.a
./empress/xtarget/linux-mipsel/rdbms/lib/msadm.a
./empress/xtarget/linux-mipsel/rdbms/lib/replication.a
./empress/xtarget/linux-mipsel/rdbms/lib/odbcbcs.a
./empress/xtarget/linux-mipsel/rdbms/lib/mw.a
./empress/xtarget/linux-mipsel/rdbms/lib/recover.a
./empress/xtarget/linux-mipsel/rdbms/lib/cxxmain.a
./empress/xtarget/linux-mipsel/rdbms/lib/miscmain.a
./empress/xtarget/linux-mipsel/rdbms/lib/qlmain.a
./empress/xtarget/linux-mipsel/rdbms/lib/mr_netsvmain.a
./empress/xtarget/linux-mipsel/rdbms/lib/especial.a
./empress/xtarget/linux-mipsel/rdbms/lib/cleanup.a
./empress/xtarget/linux-mipsel/rdbms/lib/mrutadm.a
./empress/xtarget/linux-mipsel/rdbms/lib/sup_main.a
./empress/xtarget/linux-mipsel/rdbms/lib/mpc_init.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt
./empress/xtarget/linux-mipsel/rdbms/lib_mt/cnsvkernel_t.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/utilmain.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/sfcinfo.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/repsrv.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/cnsv_t.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/logutil.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/cnsv_sup_t.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/mr.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/mprun.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/mshmadm.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/mr_netclmain.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/cnvtutil.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/dt.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/qlengine.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/util1.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/cnsv_sup.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/utilapi.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/cfadm.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/cnsv.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/ql.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/sup.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/xf.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/odbcbcs_t.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/xflkadm.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/cnsvkernel.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/xfutadm.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/wrs.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/ms.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/globmain.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/util2.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/qlbatch.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/mpapi.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/small
./empress/xtarget/linux-mipsel/rdbms/lib_mt/small/mr.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/small/dt.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/small/sup.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/small/xf.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/small/ms.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/small/globmain.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/small/msapi.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/small/libbackcomp.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/small/cxxmain.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/utilsup.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/libbackcomp.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/msadm.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/replication.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/odbcbcs.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/mw.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/recover.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/cxxmain.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/miscmain.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/qlmain.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/mr_netsvmain.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/especial.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/cleanup.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/mrutadm.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/sup_main.a
./empress/xtarget/linux-mipsel/rdbms/lib_mt/mpc_init.a
./empress/xtarget/linux-mipsel/shlib
./empress/xtarget/linux-mipsel/shlib/libmsmall_mt.so
./empress/xtarget/linux-mipsel/shlib/libms_mt.so
./empress/xtarget/linux-mipsel/shlib/libmsutilapi.so
./empress/xtarget/linux-mipsel/shlib/libbasic_sprad.so
./empress/xtarget/linux-mipsel/shlib/libmsmall.so
./empress/xtarget/linux-mipsel/shlib/libmsutilapi_mt.so
./empress/xtarget/linux-mipsel/shlib/libnlsmsgtab.so
./empress/xtarget/linux-mipsel/shlib/libms.so
./empress/xtarget/linux-mipsel/shlib/libbasic.so
./empress/xtarget/linux-mipsel/shlib/libbasic_mt_spdebug.so
./empress/xtarget/linux-mipsel/shlib/libbasic_mt_sprad.so
./empress/xtarget/linux-mipsel/shlib/libesj_text_search_index.so
./empress/xtarget/linux-mipsel/shlib/libbasic_spdebug.so
./empress/xtarget/linux-mipsel/shlib/libbasic_mt.so
./empress/xtarget/linux-mipsel/bin
./empress/xtarget/linux-mipsel/bin/empexpt
./empress/xtarget/linux-mipsel/bin/empsql
./empress/xtarget/linux-mipsel/bin/empolrec
./empress/xtarget/linux-mipsel/bin/empclean
./empress/xtarget/linux-mipsel/bin/empupgrd
./empress/xtarget/linux-mipsel/bin/emprepsync
./empress/xtarget/linux-mipsel/bin/empdblogstat
./empress/xtarget/linux-mipsel/bin/empolbak
./empress/xtarget/linux-mipsel/bin/empmkdb
./empress/xtarget/linux-mipsel/bin/empdbld
./empress/xtarget/linux-mipsel/bin/emprepwr
./empress/xtarget/linux-mipsel/bin/empsvadm
./empress/xtarget/linux-mipsel/bin/emprmdb
./empress/xtarget/linux-mipsel/bin/emppassword
./empress/xtarget/linux-mipsel/bin/empcmd
./empress/xtarget/linux-mipsel/bin/empkill
./empress/xtarget/linux-mipsel/bin/empsvlogstat
./empress/xtarget/linux-mipsel/bin/setenv.csh
./empress/xtarget/linux-mipsel/bin/empbatch
./empress/xtarget/linux-mipsel/bin/empimpt
./empress/xtarget/linux-mipsel/bin/empvers
./empress/xtarget/linux-mipsel/bin/empcsconv
./empress/xtarget/linux-mipsel/bin/setenv.sh
./empress/xtarget/linux-mipsel/bin/empshm
./empress/xtarget/linux-mipsel/bin/emprepsyncd
./empress/xtarget/linux-mipsel/bin/empadm
./empress/xtarget/linux-mipsel/config
./empress/xtarget/linux-mipsel/config/cnsv.cfg
./empress/xtarget/linux-mipsel/config/options
./empress/xtarget/linux-mipsel/config/options._
./empress/xtarget/linux-mipsel/config/initfile_.txt
./empress/xtarget/linux-mipsel/config/internal
./empress/xtarget/linux-mipsel/config/internal/internal
./empress/xtarget/linux-mipsel/config/internal/netinternal.cfg
./empress/xtarget/linux-mipsel/config/netserver.cfg._
./empress/xtarget/linux-mipsel/config/userauth.cfg._
./empress/xtarget/linux-mipsel/config/userauth.cfg.sample
./empress/xtarget/linux-mipsel/config/initfile.txt
./empress/xtarget/linux-mipsel/config/netserver.cfg
./empress/xtarget/linux-mipsel/config/odbc.ini
./empress/xtarget/linux-mipsel/nls
./empress/xtarget/linux-mipsel/nls/nlsfile_utf8_en
./empress/xtarget/linux-mipsel/nls/nlsfile_euc_cn
./empress/xtarget/linux-mipsel/nls/translate
./empress/xtarget/linux-mipsel/nls/translate/utf8-wchar.dll
./empress/xtarget/linux-mipsel/nls/translate/utf8-sjis.dll
./empress/xtarget/linux-mipsel/nls/translate/euc_jp-sjis.dll
./empress/xtarget/linux-mipsel/nls/translate/utf8-euc_jp.dll
./empress/xtarget/linux-mipsel/nls/translate/ascii.dll
./empress/xtarget/linux-mipsel/nls/translate/toc.dll
./empress/xtarget/linux-mipsel/nls/translate/utf8-latin1.dll
./empress/xtarget/linux-mipsel/nls/translate/utf8-euc_cn.dll
./empress/xtarget/linux-mipsel/nls/nlsfile_utf8_cn
./empress/xtarget/linux-mipsel/nls/nlsfile_utf8_fr
./empress/xtarget/linux-mipsel/nls/nlsfile_english
./empress/xtarget/linux-mipsel/nls/nlsfile_euc_jp
./empress/xtarget/linux-mipsel/nls/nlsfile_french
./empress/xtarget/linux-mipsel/nls/nlsfile_sjis
./empress/xtarget/linux-mipsel/nls/nlsfile_utf8_jp
./empress/xtarget/linux-mipsel/include
./empress/xtarget/linux-mipsel/include/stdhdr
./empress/xtarget/linux-mipsel/include/stdhdr/this_sys.h
./empress/xtarget/linux-mipsel/include/arch
./empress/xtarget/linux-mipsel/include/arch/msint64_port_macros.h
./empress/xtarget/linux-mipsel/common
./empress/xtarget/linux-mipsel/common/sys_bin
./empress/xtarget/linux-mipsel/common/sys_bin/set_csh_env
./empress/xtarget/linux-mipsel/common/sys_bin/basename
./empress/xtarget/linux-mipsel/common/sys_bin/tmpdir
./empress/xtarget/linux-mipsel/common/sys_bin/set_sh_env
./empress/xtarget/linux-mipsel/common/lib
./empress/xtarget/linux-mipsel/common/lib/spdebug.a
./empress/xtarget/linux-mipsel/common/lib/nlsmsgtab.a
./empress/xtarget/linux-mipsel/common/lib/romf_stub.a
./empress/xtarget/linux-mipsel/common/lib/net_svmain.a
./empress/xtarget/linux-mipsel/common/lib/net_sup.a
./empress/xtarget/linux-mipsel/common/lib/libgust2.a
./empress/xtarget/linux-mipsel/common/lib/net_client.a
./empress/xtarget/linux-mipsel/common/lib/net_spooler.a
./empress/xtarget/linux-mipsel/common/lib/net_admin.a
./empress/xtarget/linux-mipsel/common/lib/libgust.a
./empress/xtarget/linux-mipsel/common/lib/net_clmain.a
./empress/xtarget/linux-mipsel/common/lib/spstd.a
./empress/xtarget/linux-mipsel/common/lib/libbasic.a
./empress/xtarget/linux-mipsel/common/lib/net_server.a
./empress/xtarget/linux-mipsel/common/lib/sprad.a
./empress/xtarget/linux-mipsel/common/lib/net_server_adm.a
./empress/xtarget/linux-mipsel/common/lib_mt
./empress/xtarget/linux-mipsel/common/lib_mt/spdebug.a
./empress/xtarget/linux-mipsel/common/lib_mt/nlsmsgtab.a
./empress/xtarget/linux-mipsel/common/lib_mt/romf_stub.a
./empress/xtarget/linux-mipsel/common/lib_mt/net_svmain.a
./empress/xtarget/linux-mipsel/common/lib_mt/net_sup.a
./empress/xtarget/linux-mipsel/common/lib_mt/libgust2.a
./empress/xtarget/linux-mipsel/common/lib_mt/net_client.a
./empress/xtarget/linux-mipsel/common/lib_mt/net_spooler.a
./empress/xtarget/linux-mipsel/common/lib_mt/net_admin.a
./empress/xtarget/linux-mipsel/common/lib_mt/libgust.a
./empress/xtarget/linux-mipsel/common/lib_mt/net_clmain.a
./empress/xtarget/linux-mipsel/common/lib_mt/spstd.a
./empress/xtarget/linux-mipsel/common/lib_mt/libbasic.a
./empress/xtarget/linux-mipsel/common/lib_mt/net_server.a
./empress/xtarget/linux-mipsel/common/lib_mt/sprad.a
./empress/xtarget/linux-mipsel/common/lib_mt/net_server_adm.a
./target_setup.sh
./diskmount.sh
./firmware
./firmware/sdk
./firmware/sdk/cur
./firmware/sdk/cur/sdk_backup.sh
./firmware/sdk/cur/sdk_update.sh
./firmware/sdk/cur/releasenote.txt
./firmware/sdk/cur/sdk_recover.sh
./firmware/sdk/cur/sdk_check.sh
./firmware/sdk/old
./firmware/sdk/old/dcchd_build.tar
./firmware/sdk/old/releasenote.txt
./firmware/sdk/old/mrua.tar
./firmware/sdk/new
./firmware/version
./firmware/kernel
./firmware/kernel/cur
./firmware/kernel/cur/zbimage-linux-xload
./firmware/kernel/cur/releasenote.txt
./firmware/kernel/cur/phyblock0-0x20000padded
./firmware/kernel/cur/zbimage-yamon-2.13
./firmware/kernel/old
./firmware/kernel/old/zbimage-linux-xload
./firmware/kernel/old/releasenote.txt
./firmware/kernel/old/phyblock0-0x20000padded
./firmware/kernel/old/zbimage-yamon-2.13
./firmware/kernel/new
./firmware/__up_sdk
./firmware/__1_1backup
./firmware/yamaha
./firmware/yamaha/cur
./firmware/yamaha/cur/empress_update.sh
./firmware/yamaha/cur/zzz_backup.sh
./firmware/yamaha/cur/.share
./firmware/yamaha/cur/app_update.sh
./firmware/yamaha/cur/shell_update.sh
./firmware/yamaha/cur/bin_backup.sh
./firmware/yamaha/cur/script_backup.sh
./firmware/yamaha/cur/share_update.sh
./firmware/yamaha/cur/lib_backup.sh
./firmware/yamaha/cur/script_update.sh
./firmware/yamaha/cur/shell_backup.sh
./firmware/yamaha/cur/ymh_recover.sh
./firmware/yamaha/cur/ymh_check.sh
./firmware/yamaha/cur/empress_backup.sh
./firmware/yamaha/cur/app_backup.sh
./firmware/yamaha/cur/lib_update.sh
./firmware/yamaha/cur/releasenote.txt
./firmware/yamaha/cur/share_backup.sh
./firmware/yamaha/cur/zzz_update.sh
./firmware/yamaha/cur/module_backup.sh
./firmware/yamaha/cur/module_update.sh
./firmware/yamaha/cur/bin_update.sh
./firmware/yamaha/old
./firmware/yamaha/old/lib.tar
./firmware/yamaha/old/app.tar
./firmware/yamaha/old/releasenote.txt
./firmware/yamaha/new
./firmware/log
./firmware/__up_ymh
./mruafw
./mruafw/ios.bin.gz_t3iptv_prod.xload
./mruafw/video_microcode_t3iptv_prod.xload
./mruafw/audio_microcode_t3iptv_prod_dts54.xload
./mruafw/itasks
./mruafw/itasks/itask_loader.iload
./mruafw/itasks/itask_splashscreen.iload
./mruafw/xmasbootac.bin.gz_8644_ES1_prod_0000.xload
./mruafw/audio_microcode_t3iptv_prod_nodts.xload
./mruafw/xosu-xos2P4a_8644_ES1_prod_000a.xload
./mruafw/xtasks
./mruafw/xtasks/xtask_loader.xload
./mruafw/xtasks/xtask_iptoken.xload
./mruafw/audio_microcode_t3iptv_prod_dts52.xload
./mruafw/demuxpsf_microcode_t3iptv_prod.xload
./mrua
./mrua/modules
./mrua/modules/2.6.22.19-23-sigma
./mrua/modules/2.6.22.19-23-sigma/llad.ko
./mrua/modules/2.6.22.19-23-sigma/em8xxx.ko
./mrua/MRUA_src
./mrua/MRUA_src/rmchannel
./mrua/MRUA_src/rmchannel/xos2k_client
./mrua/MRUA_src/rmchannel/xos2k_client/xkc
./mrua/MRUA_src/llad_smallapps
./mrua/MRUA_src/llad_smallapps/gbus_fill
./mrua/MRUA_src/llad_smallapps/gbus_write_uint8
./mrua/MRUA_src/llad_smallapps/gbus_write_uint32_from_file
./mrua/MRUA_src/llad_smallapps/gbus_read_uint8
./mrua/MRUA_src/llad_smallapps/gbus_write_uint16
./mrua/MRUA_src/llad_smallapps/gbus_read_uint32_to_file
./mrua/MRUA_src/llad_smallapps/llad_smallapps.README
./mrua/MRUA_src/llad_smallapps/gbus_write_bin_from_file
./mrua/MRUA_src/llad_smallapps/llad_get_config
./mrua/MRUA_src/llad_smallapps/gbus_read_uint32
./mrua/MRUA_src/llad_smallapps/bw
./mrua/MRUA_src/llad_smallapps/gbus_read_bin_to_file
./mrua/MRUA_src/llad_smallapps/gbus_write_uint32
./mrua/MRUA_src/llad_smallapps/gbus_read_uint16
./mrua/MRUA_src/llad_xtest
./mrua/MRUA_src/llad_xtest/fifo32_feed
./mrua/MRUA_src/llad_xtest/genxenv2
./mrua/MRUA_src/llad_xtest/fifo32_dump
./mrua/MRUA_src/llad_xtest/rmmalloc
./mrua/MRUA_src/llad_xtest/pfla
./mrua/MRUA_src/llad_xtest/rmfree
./mrua/MRUA_src/llad_xtest/fifo32_init
./mrua/lib
./mrua/lib/libdisplayoutports.so
./mrua/lib/librmmkvdemux.so
./mrua/lib/librmchannel.so
./mrua/lib/librmsoftmixer.so
./mrua/lib/librmsofttxt.so
./mrua/lib/librmcdfs.so
./mrua/lib/librmmpeg4framework.so
./mrua/lib/libgbushsi.so
./mrua/lib/librmabcdrminterface.so
./mrua/lib/librmmp4api.so
./mrua/lib/librmcdfs_t.so
./mrua/lib/librmcssinterface.so
./mrua/lib/libruai2c.so
./mrua/lib/librmdisplay.so
./mrua/lib/librmedid.so
./mrua/lib/librmdetector3.so
./mrua/lib/librmmm_t.so
./mrua/lib/librmlibplay_t.so
./mrua/lib/librmwmaprodecoder.so
./mrua/lib/librmsha1.so
./mrua/lib/librmcpputils.so
./mrua/lib/librmaacsapi.so
./mrua/lib/librmcpputils_t.so
./mrua/lib/librmmm_g.so
./mrua/lib/librmsubidx.so
./mrua/lib/librmmpegsystemindexcreator.so
./mrua/lib/libruahsi.so
./mrua/lib/libllad.so
./mrua/lib/libtiff.so.3.8.2
./mrua/lib/librmtextsubs.so
./mrua/lib/libgetkey.so
./mrua/lib/librmcec.so
./mrua/lib/librmcore.so
./mrua/lib/libtiff.so
./mrua/lib/librmremote.so
./mrua/lib/librmwmdrmstub.so
./mrua/lib/librmcw.so
./mrua/lib/librmstreamingprotocols.so
./mrua/lib/librmhsi.so
./mrua/lib/librmspdcapi.so
./mrua/lib/libemhwlibhdmi.so
./mrua/lib/libjpeg.so.8.3.0
./mrua/lib/libdcc.so
./mrua/lib/librmmpegsystemindex.so
./mrua/lib/librmvideoout.so
./mrua/lib/librmdrm.so
./mrua/lib/librmhdmi.so
./mrua/lib/librmasfdemuxcore.so
./mrua/lib/librmmm.so
./mrua/lib/librmdetectorapi.so
./mrua/lib/librmasfpulldemuxcore.so
./mrua/lib/librmasfdemux.so
./mrua/lib/libsamples_t.so
./mrua/lib/librmfontrender_t.so
./mrua/lib/libndsp.so
./mrua/lib/libaudiooutports.so
./mrua/lib/libruahdmi.so
./mrua/lib/libgbus.so
./mrua/lib/librmavicore.so
./mrua/lib/librmpthreadw.so
./mrua/lib/librmriff.so
./mrua/lib/librmi2c.so
./mrua/lib/librmscc.so
./mrua/lib/libjpeg.so
./mrua/lib/librmdtcpapi.so
./mrua/lib/librmcprminterface.so
./mrua/lib/librmlibplay.so
./mrua/lib/librmdetector.so
./mrua/lib/librmfontrender.so
./mrua/lib/librua.so
./mrua/lib/librmbluraycps.so
./mrua/lib/librmwmdrmndstub.so
./mrua/lib/librmdetector3api.so
./mrua/lib/librmfp_t.so
./mrua/lib/librmdescriptordecoder.so
./mrua/lib/librmwmaprodecodercore.so
./mrua/lib/libtiff.so.3
./mrua/lib/librmcapture.so
./mrua/lib/libjpeg.so.8
./mrua/lib/librmwmdrmndupnp.so
./mrua/lib/librmmonitoring.so
./mrua/lib/librmdemuxwritekeyapi.so
./mrua/lib/libsamples.so
./mrua/lib/librmppf.so
./mrua/lib/librmdvbsubs.so
./mrua/lib/librmmp4core.so
./mrua/lib/librmfp.so
./mrua/lib/librmzlib.so
./mrua/lib/libemhwlibi2c.so
./mrua/lib/libemhsi.so
./mrua/lib/librmrtk86.so
./mrua/lib/librmvdemux.so
./mrua/lib/librmhttp.so
./mrua/lib/librmmp4.so
./startup.sh
./yamaha
./yamaha/module
./yamaha/module/clkmanager_mod.ko
./yamaha/module/rtc-r2025_mod.ko
./yamaha/module/usb_test_mod.ko
./yamaha/module/sata_bist_mod.ko
./yamaha/module/midi_mod.ko
./yamaha/module/stcviewer_mod.ko
./yamaha/module/dav_mod.ko
./yamaha/module/kgpio_core_mod.ko
./yamaha/module/pdev_mod.ko
./yamaha/module/ki2c_core_mod.ko
./yamaha/module/hdmiswitcher_mod.ko
./yamaha/module/userintr_mod.ko
./yamaha/module/mdport_mod.ko
./yamaha/module/coin_mod.ko
./yamaha/module/audcalib_mod.ko
./yamaha/module/psio16_mod.ko
./yamaha/module/sysfpga_mod.ko
./yamaha/module/gbusif_mod.ko
./yamaha/module/rawmidi_if_mod.ko
./yamaha/app
./yamaha/app/Ase
./yamaha/app/subapp
./yamaha/app/subapp/libFurituke.so
./yamaha/app/subapp/libRokuon.so
./yamaha/app/subapp/libSeimitsuDX.so
./yamaha/app/subapp/libTouchScreen.so
./yamaha/app/subapp/libSaitenOwari.so
./yamaha/app/subapp/libMoviePlayer.so
./yamaha/app/subapp/libPromoPlayer.so
./yamaha/app/subapp/libRanbatz.so
./yamaha/app/subapp/libPromo.so
./yamaha/app/subapp/libKanshow.so
./yamaha/app/subapp/libTokimekiSaiten.so
./yamaha/app/subapp/libSlotApp.so
./yamaha/app/subapp/libBlank.so
./yamaha/app/subapp/libStoreranbat.so
./yamaha/app/subapp/libServicemanMode.so
./yamaha/app/subapp/libArtist.so
./yamaha/app/subapp/libApologizeMsg.so
./yamaha/app/subapp/libOiroke.so
./yamaha/app/subapp/libOwnerMode.so
./yamaha/app/subapp/libTopics.so
./yamaha/app/subapp/libGravure.so
./yamaha/app/subapp/libThemeRanbat.so
./yamaha/app/subapp/libQuickSetting.so
./yamaha/app/subapp/libEnvPicture.so
./yamaha/app/subapp/libKouhaku.so
./yamaha/app/subapp/libCm.so
./yamaha/app/subapp/libDamFriendsRec.so
./yamaha/app/subapp/libDamFriendsMovie.so
./yamaha/app/subapp/libSimple.so
./yamaha/app/subapp/libBingo.so
./yamaha/app/subapp/libCmPlayer.so
./yamaha/app/subapp/libGameList.so
./yamaha/app/subapp/libCDPress2.so
./yamaha/app/subapp/libTarget.so
./yamaha/app/subapp/libCDPress2Rec.so
./yamaha/app/subapp/libSpPairing.so
./yamaha/app/subapp/libStory.so
./yamaha/app/subapp/libVoiceTraining.so
./yamaha/app/subapp/libDownload.so
./yamaha/app/subapp/libSongDisplay.so
./yamaha/app/subapp/libBasicPlayer.so
./yamaha/app/subapp/libCDPress2Prev.so
./yamaha/app/ase_launcher
./yamaha/app/puicom
./yamaha/app/dkdb.load.update.log
./yamaha/bin
./yamaha/bin/stom
./yamaha/bin/e2fsck.crypt
./yamaha/bin/ssh
./yamaha/bin/rsync
./yamaha/bin/rarpd
./yamaha/bin/smartctl
./yamaha/bin/ethtool
./yamaha/bin/ping
./yamaha/share
./yamaha/share/Ssh.bin
./yamaha/script
./yamaha/script/spr_ymh_updater.sh
./yamaha/script/spr_updater.sh
./yamaha/script/spr_ymh_backup.sh
./yamaha/script/ase_launcher.sh
./yamaha/script/spr_kernel_updater.sh
./yamaha/script/startup.sh
./yamaha/script/spr_kernel_saver.sh
./yamaha/script/spr_mounter.sh
./yamaha/script/spr_kernel_recover.sh
./yamaha/script/spr_version.sh
./yamaha/script/fsck_progress.sh
./yamaha/script/spr_sdk_recover.sh
./yamaha/script/spr_sdk_backup.sh
./yamaha/script/spr_ymh_recover.sh
./yamaha/script/spr_sdk_updater.sh
./yamaha/script/songinfo.sh
./yamaha/lib
./yamaha/lib/libResumeFile.so
./yamaha/lib/libGroupLog.so
./yamaha/lib/libDiag.so
./yamaha/lib/libWlapc.so
./yamaha/lib/libDkdb0002.so
./yamaha/lib/libSaiten.so
./yamaha/lib/libSaf.so
./yamaha/lib/libSpinet3.so
./yamaha/lib/libSubScrDriver.so
./yamaha/lib/libDkdb0001.so
./yamaha/lib/libKServer.so
./yamaha/lib/libPCMPlayer.so
./yamaha/lib/libOsdManager.so
./yamaha/lib/libCDPlayer.so
./yamaha/lib/libKPlayer.so
./yamaha/lib/libSpnxManager.so
./yamaha/lib/libVCManager.so
./yamaha/lib/libYmhCommon.so
./yamaha/lib/libMtcPlayer.so
./yamaha/lib/libRecordingDiag.so
./yamaha/lib/libSongReserve.so
./yamaha/lib/libSpinet2.so
./yamaha/lib/libqrencode.so
./yamaha/lib/libDavVencDriver.so
./yamaha/lib/libVoiceChangeMgr.so
./yamaha/lib/libMediaUtility.so
./yamaha/lib/libHdmiManager.so
./yamaha/lib/libSae.so
./yamaha/lib/libEventManager.so
./yamaha/lib/libRcp.so
./yamaha/lib/libVgmRendEng.so
./yamaha/lib/libPdevif.so
./yamaha/lib/libAVPlayer.so
./yamaha/lib/libTrManager.so
./yamaha/lib/libDkdbUpdate0001.so
./yamaha/lib/libCoin.so
./yamaha/lib/libarchive.so.2.5.904
./yamaha/lib/libSelfDiag.so
./yamaha/lib/libext2fs.so.2
./yamaha/lib/libSysManager.so
./yamaha/lib/libReqOrganizer.so
./yamaha/lib/libarchive.so.2.5
./yamaha/lib/libScrManager.so
./yamaha/lib/libHddSecure.so
./yamaha/lib/libSftp.so
./yamaha/lib/libAVPlayerAgent.so
./yamaha/lib/libM2vPlayer.so
./yamaha/lib/libMraExtract.so
./yamaha/lib/libVoiceChange.so
./yamaha/lib/libSpinetEncode.so
./yamaha/lib/libDistManager.so
./yamaha/lib/libAVManager.so
./yamaha/lib/libCacheManager.so
./yamaha/lib/libAVPlayer_dcchd.so
./yamaha/lib/libMP3Player.so
./yamaha/lib/libRUALogger.so
./yamaha/lib/libDavpDriver.so
./yamaha/lib/libEmtvScheduler.so
./yamaha/lib/libPnlManager.so
./yamaha/lib/libSaiPlayer.so
./yamaha/lib/libKRBServer.so
./yamaha/lib/libLockStatus.so
./yamaha/lib/libCcp.so
./yamaha/lib/libReqDlOrgFile.so
./yamaha/lib/libLftp.so
./yamaha/lib/libDenmoku.so
./yamaha/lib/libVgmEng.so
./yamaha/lib/libDirectSe.so
./yamaha/lib/libResManager.so
./yamaha/lib/libDkdbUpdate.so
./yamaha/lib/libMPlayer.so
./yamaha/lib/libHttpClient.so
./yamaha/lib/libOkdPlayer.so
./yamaha/lib/libFileIndex.so
./yamaha/lib/libSTOManager.so
./yamaha/lib/libDavAdecDriver.so
./yamaha/lib/libFileCtrl.so
./yamaha/lib/libMedPlayer.so
./yamaha/lib/libDdm.so
./yamaha/lib/libDkdb.so
./yamaha/lib/libBgvPlayer.so
./yamaha/lib/libComDialog.so
./yamaha/lib/libGp1Driver.so
./yamaha/lib/libext2fs.so
./yamaha/lib/libSubVideoManager.so
./yamaha/lib/libAVRecDriver.so
./yamaha/lib/libDlp.so
./yamaha/lib/libTempManager.so
./yamaha/lib/libNwp.so
./yamaha/lib/libFontManager.so
./yamaha/lib/libDmExtend.so
./yamaha/lib/libCmEng.so
./yamaha/lib/libAVRecorder.so
./yamaha/lib/libCui.so
./yamaha/lib/libLocalDistManager.so
./yamaha/lib/libEnvParam.so
./yamaha/lib/libHttpDistManager.so
./yamaha/lib/libSasCall.so
./yamaha/lib/libPhtPlayer.so
./yamaha/lib/libDkdbUpdate0002.so
./yamaha/lib/libDs2Ftp.so
./yamaha/lib/libGenPlayer.so
./yamaha/lib/libarchive.so.2
./yamaha/lib/libEnvConfigure.so
./yamaha/lib/libOamc.so
./yamaha/lib/libCdBurn.so
./yamaha/lib/libBgvSeqGenerator.so
./yamaha/lib/libSongInfo.so
./yamaha/lib/libMmpc.so
./yamaha/lib/libClkManager.so
./yamaha/lib/libAudCalib.so
./yamaha/lib/libAVPlayerLog.so
./yamaha/lib/libTlpPlayer.so
./yamaha/lib/libDialManager.so
./yamaha/lib/libFsEvtMgr.so
./yamaha/lib/libKpse.so
./yamaha/lib/libKeyClick.so
hiromitu@raspberrypi:/media/
@bakueikozo
Copy link
Author

use serial output

@ZZZ8
Copy link

ZZZ8 commented Sep 8, 2024

use serial output
Haha, I can use it now. Thank you very much

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment