Skip to content

Instantly share code, notes, and snippets.

@bakueikozo

bakueikozo/china 4G wifi router

Created January 19, 2025 00:57
Show Gist options
  • Save bakueikozo/515e4ba4fd9c35a93da831f64951b379 to your computer and use it in GitHub Desktop.
Save bakueikozo/515e4ba4fd9c35a93da831f64951b379 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
china 4G wifi router
===================================================================
MT7621 stage1 code Mar 12 2015 14:43:30 (ASIC)
CPU=500000000 HZ BUS=166666666 HZ
==================================================================
Change MPLL source from XTAL to CR...
do MEMPLL setting..
MEMPLL Config : 0x21100000
3PLL mode + External loopback
=== XTAL-40Mhz === DDR-1066Mhz ===
PLL4 FB_DL: 0xb, 1/0 = 513/511 2D000000
PLL2 FB_DL: 0xe, 1/0 = 529/495 39000000
PLL3 FB_DL: 0x14, 1/0 = 520/504 51000000
do DDR setting..[01F40000]
Apply DDR3 Setting...(use customer AC)
0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
--------------------------------------------------------------------------------
0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
000E:| 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
000F:| 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0
0010:| 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
0011:| 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0
0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
DRAMC_DQSCTL1[0e0]=13000000
DRAMC_DQSGCTL[124]=80000033
rank 0 coarse = 15
rank 0 fine = 72
B:| 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0
opt_dle value:9
DRAMC_DDR2CTL[07c]=C287221D
DRAMC_PADCTL4[0e4]=000022B3
DRAMC_DQIDLY1[210]=0608080A
DRAMC_DQIDLY2[214]=06070707
DRAMC_DQIDLY3[218]=0A090907
DRAMC_DQIDLY4[21c]=0A0A0A09
DRAMC_R0DELDLY[018]=00002322
==================================================================
RX DQS perbit delay software calibration
==================================================================
1.0-15 bit dq delay value
==================================================================
bit| 0 1 2 3 4 5 6 7 8 9
--------------------------------------
0 | 8 7 7 6 7 6 7 6 5 7
10 | 9 7 9 6 8 8
--------------------------------------
==================================================================
2.dqs window
x=pass dqs delay value (min~max)center
y=0-7bit DQ of every group
input delay:DQS0 =34 DQS1 = 35
==================================================================
bit DQS0 bit DQS1
0 (1~64)32 8 (1~65)33
1 (1~66)33 9 (1~66)33
2 (1~66)33 10 (2~69)35
3 (1~67)34 11 (1~64)32
4 (1~67)34 12 (1~69)35
5 (1~65)33 13 (1~62)31
6 (1~68)34 14 (1~66)33
7 (1~68)34 15 (1~65)33
==================================================================
3.dq delay value last
==================================================================
bit| 0 1 2 3 4 5 6 7 8 9
--------------------------------------
0 | 10 8 8 6 7 7 7 6 7 9
10 | 9 10 9 10 10 10
==================================================================
==================================================================
TX perbyte calibration
==================================================================
DQS loop = 15, cmp_err_1 = ffff0000
dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2
DQ loop=15, cmp_err_1 = ffff0000
dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1
dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2
byte:0, (DQS,DQ)=(8,8)
byte:1, (DQS,DQ)=(8,8)
DRAMC_DQODLY1[200]=88888888
DRAMC_DQODLY2[204]=88888888
20,data:88
[EMI] DRAMC calibration passed
===================================================================
MT7621 stage1 code done
CPU=500000000 HZ BUS=166666666 HZ
===================================================================
U-Boot 1.1.3 (Apr 11 2015 - 20:07:37)
SoC:MediaTek MT7621
DRAM: 512MB(448MB LowMem,64MB HighMem)
relocate_code Pointer at: 9bfa8000
Config XHCI 40M PLL
******************************
Software System Reset Occurred
******************************
flash manufacture id: ef, device id 40 18
Flash:W25Q128BV Size:16MB
*** Warning - bad CRC, using default environment
_______________________________________________________________
| ____ _ ____ |
| | _ \ __ _ _ __ __| | ___ _ __ __ _| __ ) _____ __ |
| | |_) / _` | '_ \ / _` |/ _ \| '__/ _` | _ \ / _ \ \/ / |
| | __/ (_| | | | | (_| | (_) | | | (_| | |_) | (_) > < |
| |_| \__,_|_| |_|\__,_|\___/|_| \__,_|____/ \___/_/\_\ |
| |
| PandoraBox Ralink/MTK Platform |
| The best solution for you |
| Copyright 2015 D-Team Technology Co.,Ltd. SZ |
| Board:AmazingBox |
| |
| lintel<[email protected]> |
|______________________________________________________________|
===============Board Info==================
CPU Frequency:880MHz
Detected Memory:448MiB
Bootloader Version:4.3.1.0
--------------------------------------------
ASIC MT7621A DualCore (MAC to MT7530 Mode)
DRAM_CONF_FROM: Auto-Detection
DRAM_TYPE: DDR3
DRAM bus: 16 bit
Xtal Mode=3 OCP Ratio=1/3
Flash component: SPI Flash
Date:Apr 11 2015 Time:20:07:37
============================================
icache: sets:256, ways:4, linesz:32 ,total:32KiB
dcache: sets:256, ways:4, linesz:32 ,total:32KiB
============================================
#Reset_MT7530
GSW VLAN:LLLW
GPIO_MODE init:
I2C:GPIO
UART_F:GPIO
GE2:GPIO
WDT_RST:GPIO
GPIO_MODE_REGs: 0x4853d
READY_LED_BIT:14.
Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
7: Load Boot Loader code then write to Flash via Serial.
9: Load Boot Loader code then write to Flash via TFTP.
 0
3: System Boot system code via Flash.
Press Reset button enter upgrade mode!
## Booting image at bc050000 ...
Image Name: MIPS LEDE Linux-4.4.182
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 1603061 Bytes = 1.5 MB
Load Address: 80001000
Entry Point: 80001000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80001000) ...
## Giving linux memsize in MB, 512
Starting kernel ...
[ 0.000000] Linux version 4.4.182 (haowen@haowen) (gcc version 5.4.0 (LEDE GCC 5.4.0 r4030-6028f00df0) ) #0 SMP Thu Jun 20 10:53:53 2019
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is ZBT-WG3526
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 10000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] VPE topology {2,2} total 4
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.000000] PERCPU: Embedded 10 pages/cpu @8120c000 s8544 r8192 d24224 u40960
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Writing ErrCtl register=00014a00
[ 0.000000] Readback ErrCtl register=00014a00
[ 0.000000] Memory: 254280K/262144K available (3773K kernel code, 223K rwdata, 880K rodata, 232K init, 237K bss, 7864K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:256
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[ 0.007783] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[ 0.070397] pid_max: default: 32768 minimum: 301
[ 0.075102] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.081625] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.092969] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.092979] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.092990] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.093146] CPU1 revision is: 0001992f (MIPS 1004Kc)
[ 0.177280] Synchronize counters for CPU 1: done.
[ 0.192726] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.192734] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.192740] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.192817] CPU2 revision is: 0001992f (MIPS 1004Kc)
[ 0.267682] Synchronize counters for CPU 2: done.
[ 0.273820] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.273827] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.273833] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.273918] CPU3 revision is: 0001992f (MIPS 1004Kc)
[ 0.352850] Synchronize counters for CPU 3: done.
[ 0.357584] Brought up 4 CPUs
[ 0.363998] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.373799] futex hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.380165] pinctrl core: initialized pinctrl subsystem
[ 0.385951] NET: Registered protocol family 16
[ 0.394690] rt2880-pinmux pinctrl: invalid group "wdt rst" for function "gpio"
[ 0.432191] pull PCIe RST: RALINK_RSTCTRL = 0
[ 0.736985] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.742032] ***** Xtal 40MHz *****
[ 0.745392] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.750483] Port 0 N_FTS = 1b102800
[ 0.753956] Port 1 N_FTS = 1b105000
[ 0.757395] Port 2 N_FTS = 1b105000
[ 1.912482] PCIE0 no card, disable it(RST&CLK)
[ 1.916841] -> 10207f2
[ 1.919242] PCIE1 enabled
[ 1.921833] PCIE2 enabled
[ 1.924433] PCI host bridge /pcie@1e140000 ranges:
[ 1.929210] MEM 0x0000000060000000..0x000000006fffffff
[ 1.934371] IO 0x000000001e160000..0x000000001e16ffff
[ 1.939566] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[ 1.981171] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.986904] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.992493] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.999142] usbcore: registered new interface driver usbfs
[ 2.004642] usbcore: registered new interface driver hub
[ 2.010024] usbcore: registered new device driver usb
[ 2.015459] i2c-mt7621 1e000900.i2c: clock 100KHz, re-start not support
[ 2.022566] PCI host bridge to bus 0000:00
[ 2.026588] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[ 2.033442] pci_bus 0000:00: root bus resource [io 0xffffffff]
[ 2.039275] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 2.046044] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 2.056115] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 2.062629] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.069565] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[ 2.076107] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.083036] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[ 2.089755] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[ 2.096945] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[ 2.103672] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
[ 2.110429] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
[ 2.117151] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[ 2.124432] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
[ 2.131577] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 2.136532] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
[ 2.143242] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
[ 2.150432] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
[ 2.157148] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 2.162090] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
[ 2.168823] BAR0 at slot 0 = 0
[ 2.171831] bus=0x0, slot = 0x0
[ 2.174968] BAR0 at slot 1 = 0
[ 2.177961] bus=0x0, slot = 0x1
[ 2.181085] bus=0x1, slot = 0x0, irq=0xff
[ 2.185080] bus=0x2, slot = 0x1, irq=0xff
[ 2.190281] clocksource: Switched to clocksource GIC
[ 2.197044] NET: Registered protocol family 2
[ 2.202139] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 2.209027] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 2.215453] TCP: Hash tables configured (established 2048 bind 2048)
[ 2.221814] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 2.227577] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 2.234094] NET: Registered protocol family 1
[ 2.470214] 4 CPUs re-calibrate udelay(lpj = 2924544)
[ 2.476796] Crashlog allocated RAM at address 0x3f00000
[ 2.491645] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.497408] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 2.510195] io scheduler noop registered
[ 2.514074] io scheduler deadline registered (default)
[ 2.519717] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[ 2.527086] console [ttyS0] disabled
[ 2.530655] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 33, base_baud = 3125000) is a 16550A
[ 2.539611] console [ttyS0] enabled
[ 2.539611] console [ttyS0] enabled
[ 2.546503] bootconsole [early0] disabled
[ 2.546503] bootconsole [early0] disabled
[ 2.555617] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[ 2.562994] spi-mt7621 1e000b00.spi: sys_freq: 50000000
[ 2.569144] m25p80 spi32766.0: using chunked io (size=32)
[ 2.574559] m25p80 spi32766.0: w25q128 (16384 Kbytes)
[ 2.579718] art auth success
[ 2.582675] 5 ofpart partitions found on MTD device spi32766.0
[ 2.588481] Creating 5 MTD partitions on "spi32766.0":
[ 2.593615] 0x000000000000-0x000000030000 : "u-boot"
[ 2.599798] 0x000000030000-0x000000040000 : "u-boot-env"
[ 2.606401] 0x000000040000-0x000000050000 : "factory"
[ 2.612669] 0x000000050000-0x000000ff0000 : "firmware"
[ 2.644321] 2 uimage-fw partitions found on MTD device firmware
[ 2.650257] 0x000000050000-0x0000001d7635 : "kernel"
[ 2.656461] 0x0000001d7635-0x000000ff0000 : "rootfs"
[ 2.662581] mtd: device 5 (rootfs) set to be root filesystem
[ 2.668294] 1 squashfs-split partitions found on MTD device rootfs
[ 2.674481] 0x0000008c0000-0x000000ff0000 : "rootfs_data"
[ 2.681108] 0x000000ff0000-0x000001000000 : "art"
[ 2.687751] netif_napi_add() called with weight 128 on device eth%d
[ 2.762299] libphy: mdio: probed
[ 4.165019] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
[ 4.171727] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 10
[ 4.181194] mt7621_wdt 1e000100.wdt: Initialized
[ 4.187499] NET: Registered protocol family 10
[ 4.193449] NET: Registered protocol family 17
[ 4.197946] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 4.210611] 8021q: 802.1Q VLAN Support v1.8
[ 4.217698] hctosys: unable to open rtc device (rtc0)
[ 4.228035] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[ 4.235712] Freeing unused kernel memory: 232K
[ 4.443259] random: nonblocking pool is initialized
[ 5.198048] init: Console is alive
[ 5.201743] init: - watchdog -
[ 7.004074] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 7.123661] SCSI subsystem initialized
[ 7.131745] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.139272] ehci-platform: EHCI generic platform driver
[ 7.146585] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.153897] ohci-platform: OHCI generic platform driver
[ 7.160909] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.175067] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 7.180495] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[ 7.200464] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x00210010
[ 7.208930] xhci-mtk 1e1c0000.xhci: irq 29, io mem 0x1e1c0000
[ 7.215714] hub 1-0:1.0: USB hub found
[ 7.219535] hub 1-0:1.0: 2 ports detected
[ 7.223996] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 7.229298] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[ 7.236928] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 7.245895] hub 2-0:1.0: USB hub found
[ 7.249705] hub 2-0:1.0: 1 port detected
[ 7.262172] MTK MSDC device init.
[ 7.301907] sdhci: Secure Digital Host Controller Interface driver
[ 7.308077] sdhci: Copyright(c) Pierre Ossman
[ 7.313363] sdhci-pltfm: SDHCI platform and OF driver helper
[ 7.321689] usbcore: registered new interface driver usb-storage
[ 7.329907] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 7.340608] init: - preinit -
[ 7.678996] usb 1-2: new high-speed USB device number 2 using xhci-mtk
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 11.011425] mount_root: loading kmods from internal overlay
[ 11.043840] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 11.052648] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 11.362414] jffs2: notice: (454) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 11.378404] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 11.388656] block: extroot: not configured
[ 11.537862] jffs2: notice: (451) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 11.760063] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 11.770198] block: extroot: not configured
[ 11.801316] mount_root: switching to jffs2 overlay
[ 11.816072] urandom-seed: Seeding with /etc/urandom.seed
[ 11.911095] procd: - early -
[ 11.914075] procd: - watchdog -
[ 12.560588] procd: - watchdog -
[ 12.564066] procd: - ubus -
[ 12.741929] procd: - init -
Please press Enter to activate this console.
[ 13.165068] kmodloader: loading kernel modules from /etc/modules.d/*
[ 13.261470] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 13.273854] tun: Universal TUN/TAP device driver, 1.6
[ 13.278911] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 13.290607] l2tp_core: L2TP core driver, V2.0
[ 13.296170] l2tp_netlink: L2TP netlink interface
[ 13.302198] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 13.309432] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 13.316514] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 13.328178] gre: GRE over IPv4 demultiplexor driver
[ 13.334707] ip_gre: GRE over IPv4 tunneling driver
[ 13.348248] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 13.911489] register mt_drv
[ 13.918957]
[ 13.918957]
[ 13.918957] === pAd = c0701000, size = 1238008 ===
[ 13.918957]
[ 13.928427] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
[ 13.935381] <-- RTMPAllocAdapterBlock, Status=0
[ 13.939893] pAd->CSRBaseAddress =0xc0600000, csr_addr=0xc0600000!
[ 13.945974] device_id =0x7603
[ 13.948933] AP Driver version-4.0.1.0rev2.P1_ZTE
[ 13.953539] RtmpChipOpsHook(507): Not support for HIF_MT yet!
[ 13.959253] mt7603_init()-->
[ 13.962142] mt_bcn_buf_init(224): Not support for HIF_MT yet!
[ 13.967857] <--mt7603_init()
[ 13.976253] xt_ratelimit: 0.3.2 load success.
[ 13.993234] u32 classifier
[ 13.995995] input device check on
[ 13.999699] Actions configured
[ 14.005723] Mirror/redirect action on
[ 14.018314] nf_conntrack version 0.5.0 (3976 buckets, 15904 max)
[ 14.030927] fuse init (API version 7.23)
[ 14.399413] register rt2860
[ 14.410519]
[ 14.410519]
[ 14.410519] === pAd = c0b81000, size = 2097688 ===
[ 14.410519]
[ 14.420215] <-- RTMPAllocTxRxRingMemory, Status=0
[ 14.425872] <-- RTMPAllocAdapterBlock, Status=0
[ 14.430411] pAd->CSRBaseAddress =0xc0a80000, csr_addr=0xc0a80000!
[ 14.436478] device_id =0x7662
[ 14.439438] ==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a
[ 14.449079] RtmpChipOpsEepromHook::e2p_type=0, inf_Type=5
[ 14.454479] RtmpEepromGetDefault::e2p_dafault=2
[ 14.460255] NVM is efuse and the information is too less to bring up the interface
[ 14.467785] Force to use Flash mode
[ 14.471264] NVM is FLASH mode (pAd->flash_offset = 0x48000)
[ 14.476811] get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai
[ 14.489838] GobiNet_fib: Fibocom_Linux_GobiNet_Driver_V1.00.00.09
[ 14.496282] usbcore: registered new interface driver GobiNet_fib
[ 14.505306] GobiNet: 2011-07-29-1026
[ 14.509350] usbcore: registered new interface driver GobiNet_ls
[ 14.519239] GobiNet: Quectel_Linux&Android_GobiNet_Driver_V1.6.2.9
[ 14.529585] GobiNet_q 1-2:1.4 usb0: register 'GobiNet_q' at usb-1e1c0000.xhci-2, GobiNet Ethernet Device, 02:50:f4:00:00:00
[ 14.543670] creating qcqmi0
[ 14.547026] usbcore: registered new interface driver GobiNet_q
[ 14.557255] GobiNet: YUGA GobiNet Driver-1808311742
[ 14.562498] usbcore: registered new interface driver GobiNet_yg
[ 14.573997] Bridge firewalling registered
[ 14.580551] usbcore: registered new interface driver cdc_acm
[ 14.586223] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 14.596263] usbcore: registered new interface driver cdc_ether
[ 14.605146] usbcore: registered new interface driver cdc_ncm
[ 14.612087] usbcore: registered new interface driver cdc_subset
[ 14.619366] usbcore: registered new interface driver cdc_wdm
[ 14.626801] usbcore: registered new interface driver huawei_cdc_ncm
[ 14.634901] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.764520] usbcore: registered new interface driver qmi_wwan
[ 14.771849] usbcore: registered new interface driver rndis_host
[ 14.780539] usbcore: registered new interface driver ums-alauda
[ 14.787858] usbcore: registered new interface driver ums-cypress
[ 14.795393] usbcore: registered new interface driver ums-datafab
[ 14.802734] usbcore: registered new interface driver ums-freecom
[ 14.810169] usbcore: registered new interface driver ums-isd200
[ 14.817614] usbcore: registered new interface driver ums-jumpshot
[ 14.825087] usbcore: registered new interface driver ums-karma
[ 14.832811] usbcore: registered new interface driver ums-sddr09
[ 14.840184] usbcore: registered new interface driver ums-sddr55
[ 14.847800] usbcore: registered new interface driver ums-usbat
[ 14.856975] usbcore: registered new interface driver usbserial
[ 14.862996] usbcore: registered new interface driver usbserial_generic
[ 14.869632] usbserial: USB Serial support registered for generic
[ 14.904464] xt_time: kernel timezone is -0000
[ 14.910128] usbcore: registered new interface driver cdc_mbim
[ 14.925968] PPP generic driver version 2.4.2
[ 14.931688] PPP MPPE Compression module registered
[ 14.937653] NET: Registered protocol family 24
[ 14.943376] PPTP driver version 0.8.5
[ 14.952796] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 14.959257] usbcore: registered new interface driver option
[ 14.965023] usbserial: USB Serial support registered for GSM modem (1-port)
[ 14.972524] option 1-2:1.0: GSM modem (1-port) converter detected
[ 14.979018] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 14.986176] option 1-2:1.1: GSM modem (1-port) converter detected
[ 14.992858] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 15.000106] option 1-2:1.2: GSM modem (1-port) converter detected
[ 15.006866] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 15.013993] option 1-2:1.3: GSM modem (1-port) converter detected
[ 15.020677] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB3
[ 15.031463] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 20.071981] TX_BCN DESC aefb3000 size = 320
[ 20.076273] RX[0] DESC aefb5000 size = 2048
[ 20.081119] RX[1] DESC aefb6000 size = 2048
[ 20.093380] E2pAccessMode=2
[ 20.096766] cfg_mode=9
[ 20.099128] cfg_mode=9
[ 20.101596] wmode_band_equal(): Band Equal!
[ 20.108507] APSDCapable[0]=0
[ 20.111486] APSDCapable[1]=0
[ 20.114370] APSDCapable[2]=0
[ 20.117273] APSDCapable[3]=0
[ 20.120254] APSDCapable[4]=0
[ 20.123271] APSDCapable[5]=0
[ 20.126169] APSDCapable[6]=0
[ 20.129069] APSDCapable[7]=0
[ 20.132061] APSDCapable[8]=0
[ 20.134943] APSDCapable[9]=0
[ 20.137817] APSDCapable[10]=0
[ 20.140828] APSDCapable[11]=0
[ 20.143794] APSDCapable[12]=0
[ 20.146755] APSDCapable[13]=0
[ 20.149718] APSDCapable[14]=0
[ 20.152739] APSDCapable[15]=0
[ 20.155705] default ApCliAPSDCapable[0]=0
[ 20.163216] Key1Str is Invalid key length(0) or Type(1)
[ 20.168871] Key2Str is Invalid key length(0) or Type(1)
[ 20.174636] Key3Str is Invalid key length(0) or Type(1)
[ 20.180429] Key4Str is Invalid key length(0) or Type(1)
[ 20.211163] [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=0
[ 20.216842] [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0
[ 20.222642] [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0
[ 20.229170] FW Version:ap_pcie���
[ 20.232628] FW Build Date:20160107100755�
[ 20.236958] CmdAddressLenReq:(ret = 0)
[ 20.241536] CmdFwStartReq: override = 1, address = 1048576
[ 20.247081] CmdStartDLRsp: WiFI FW Download Success
[ 20.267304] AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
[ 20.273298] efuse_probe: efuse = 10000002
[ 20.277387] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
[ 20.282866] RtmpEepromGetDefault::e2p_dafault=1
[ 20.287397] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
[ 20.295047] NVM is FLASH mode, flash_offset = 0x40000
[ 20.300442] 1. Phy Mode = 14
[ 20.304035] @@@ NICReadEEPROMParameters : pAd->FWLoad=0
[ 20.483522] Country Region from e2p = ffff
[ 20.487702] tssi_1_target_pwr_g_band = 32
[ 20.491846] 2. Phy Mode = 14
[ 20.494943] 3. Phy Mode = 14
[ 20.497866] NICInitPwrPinCfg(14): Not support for HIF_MT yet!
[ 20.503709] NICInitializeAsic(584): Not support rtmp_mac_sys_reset () for HIF_MT yet!
[ 20.511587] mt_mac_init()-->
[ 20.514499] mt7603_init_mac_cr()-->
[ 20.519012] AsicSetMacMaxLen(1826): Set the Max RxPktLen=1024!
[ 20.524993] <--mt_mac_init()
[ 20.528054] WTBL Segment 1 info:
[ 20.531482] MemBaseAddr/FID:0x28000/0
[ 20.535391] EntrySize/Cnt:32/128
[ 20.538844] WTBL Segment 2 info:
[ 20.542302] MemBaseAddr/FID:0x40000/0
[ 20.546169] EntrySize/Cnt:64/128
[ 20.549580] WTBL Segment 3 info:
[ 20.552972] MemBaseAddr/FID:0x42000/64
[ 20.556901] EntrySize/Cnt:64/128
[ 20.560351] WTBL Segment 4 info:
[ 20.563679] MemBaseAddr/FID:0x44000/128
[ 20.567693] EntrySize/Cnt:32/128
[ 20.571273] AntCfgInit(2602): Not support for HIF_MT yet!
[ 20.576806] RTMPSetPhyMode(): channel out of range, use first ch=0
[ 20.583232] MCS Set = ff ff 00 00 01
[ 23.190351] [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
[ 23.196359] [PMF]ap_pmf_init:: apidx=1, MFPC=0, MFPR=0, SHA256=0
[ 23.202464] AsicSetRalinkBurstMode(4148): Not support for HIF_MT yet!
[ 23.208879] RTMPSetPiggyBack(876): Not support for HIF_MT yet!
[ 23.238098] AsicSetTxPreamble(4135): Not support for HIF_MT yet!
[ 23.244165] The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4
[ 23.251805] AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0
[ 23.257698] Main bssid = f8:5e:3c:2b:74:be
[ 23.261898] <==== rt28xx_init, Status=0
[ 23.269041] @@@ ed_monitor_exit : ===>
[ 23.272856] @@@ ed_monitor_exit : <===
[ 23.276623] mt7603_set_ed_cca: TURN OFF EDCCA mac 0x10618 = 0xd7083f0f
[ 23.283391] WiFi Startup Cost (ra0): 3.210s
[ 23.333798] device eth0.1 entered promiscuous mode
[ 23.338619] device eth0 entered promiscuous mode
[ 23.350490] br-lan: port 1(eth0.1) entered forwarding state
[ 23.356185] br-lan: port 1(eth0.1) entered forwarding state
[ 23.378443] GobiNet_q 1-2:1.4 usb0: kevent 12 may have been dropped
[ 24.159100] device ra0 entered promiscuous mode
[ 24.164039] br-lan: port 2(ra0) entered forwarding state
[ 24.169572] br-lan: port 2(ra0) entered forwarding state
[ 24.597593] build time =
[ 24.600367] 20141115060606a
[ 24.603315] rom patch for E3 IC
[ 24.606465]
[ 24.607982] platform =
[ 24.610505] ALPS
[ 24.612508] hw/sw version =
[ 24.615472] ŠŠ
[ 24.617361] patch version =
[ 24.620315] ���
[ 24.637051] FW Version:0.0.00 Build:1
[ 24.640788] Build Time:201507311614____
[ 24.644813] fw for E3 IC
[ 24.668400] RX[0] DESC ae62a000 size = 4096
[ 24.673927] RX[1] DESC ae62b000 size = 4096
[ 24.687913] E2pAccessMode=2
[ 24.691661] cfg_mode=14
[ 24.694116] cfg_mode=14
[ 24.696562] wmode_band_equal(): Band Not Equal!
[ 24.704124] APSDCapable[0]=0
[ 24.707019] APSDCapable[1]=0
[ 24.710000] APSDCapable[2]=0
[ 24.713097] APSDCapable[3]=0
[ 24.715995] APSDCapable[4]=0
[ 24.718869] APSDCapable[5]=0
[ 24.721780] APSDCapable[6]=0
[ 24.724723] APSDCapable[7]=0
[ 24.727611] APSDCapable[8]=0
[ 24.730524] APSDCapable[9]=0
[ 24.733428] APSDCapable[10]=0
[ 24.736419] APSDCapable[11]=0
[ 24.739418] APSDCapable[12]=0
[ 24.742918] APSDCapable[13]=0
[ 24.745985] APSDCapable[14]=0
[ 24.748953] APSDCapable[15]=0
[ 24.752196] default ApCliAPSDCapable[0]=0
[ 24.760146] Key1Str is Invalid key length(0) or Type(1)
[ 24.766008] Key2Str is Invalid key length(0) or Type(1)
[ 24.771818] Key3Str is Invalid key length(0) or Type(1)
[ 24.777539] Key4Str is Invalid key length(0) or Type(1)
[ 24.811560] 1. Phy Mode = 49
[ 24.814916] get_chl_grp:illegal channel (167)
[ 24.819297] get_chl_grp:illegal channel (167)
[ 24.823749] get_chl_grp:illegal channel (169)
[ 24.828123] get_chl_grp:illegal channel (169)
[ 24.832555] get_chl_grp:illegal channel (171)
[ 24.836920] get_chl_grp:illegal channel (171)
[ 24.841408] /data4/zbt/MT7621/openwrt-17.01.7/build_dir/target-mipsel_24kc_musl-1.1.16/linux-ramips_mt7621/mt76x2e-3.0.4.0_P2/rlt_wifi_ap//../rlt_wifi/chips/mt76x2.c:2899 assert (ad->TxPower[choffset].Channel == 42)failed
[ 24.861150] Country Region from e2p = ffff
[ 24.865386] mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0
[ 24.873366] mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=0, ePA_type=3
[ 24.880487] mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=0, low_temp_slope=0
[ 24.889224] mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=0, low_temp_slope=0
[ 24.897960] mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=0, tc_upper_bound=0
[ 24.906558] mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=0, tc_upper_bound=0
[ 24.915192] mt76x2_get_external_lna_gain::LNA type=0x11, BLNAGain=0x0, ALNAGain0=0x0, ALNAGain1=0x0, ALNAGain2=0x0
[ 24.925601] 2. Phy Mode = 49
[ 24.928588] 3. Phy Mode = 49
[ 24.931533] andes_pci_fw_init
[ 24.934582] 0x1300 = 00073200
[ 24.971960] AntCfgInit: primary/secondary ant 0/1
[ 24.976689] andes_load_cr:cr_type(2)
[ 24.993464] ChipStructAssign(): MT76x2 hook !
[ 24.997971] MCS Set = ff ff 00 00 01
[ 25.001913] mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42
[ 25.111585] APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2)
[ 25.134360] mt76x2_calibration(channel = 42)
[ 25.350334] br-lan: port 1(eth0.1) entered forwarding state
[ 25.541503] The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4
[ 25.549183] Main bssid = f8:5e:3c:2b:74:bf
[ 25.553382] mt76x2_reinit_agc_gain:original agc_vga0 = 0x5c, agc_vga1 = 0x5c
[ 25.560485] mt76x2_reinit_agc_gain:updated agc_vga0 = 0x5c, agc_vga1 = 0x5c
[ 25.567546] mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x27, hi_lna1 = 0x27
[ 25.574779] mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x27, hi_lna1 = 0x27
[ 25.581995] original vga value(chain0) = 5c
[ 25.586221] original vga value(chain1) = 5c
[ 25.590610] <==== rt28xx_init, Status=0
[ 25.594513] get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai
[ 25.611446] get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=apclii
[ 25.622242] RTMPDrvOpen(1):Check if PDMA is idle!
[ 25.627037] RTMPDrvOpen(2):Check if PDMA is idle!
[ 26.160333] br-lan: port 2(ra0) entered forwarding state
[ 26.581689] device rai0 entered promiscuous mode
[ 26.586509] br-lan: port 3(rai0) entered forwarding state
[ 26.592008] br-lan: port 3(rai0) entered forwarding state
[ 28.590327] br-lan: port 3(rai0) entered forwarding state
[ 41.205325] GobiNet_q 1-2:1.4 usb0: kevent 12 may have been dropped
[ 41.211665] GobiNet_q 1-2:1.4 usb0: kevent 12 may have been dropped
[ 43.699838] usb 1-2: USB disconnect, device number 2
[ 43.705329] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 43.713667] option 1-2:1.0: device disconnected
[ 43.719019] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 43.727414] option 1-2:1.1: device disconnected
[ 43.732957] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 43.741355] option 1-2:1.2: device disconnected
[ 43.746674] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
[ 43.755008] option 1-2:1.3: device disconnected
[ 43.761069] GobiNet_q 1-2:1.4 usb0: unregister 'GobiNet_q' usb-1e1c0000.xhci-2, GobiNet Ethernet Device
[ 55.170384] usb 1-2: new high-speed USB device number 3 using xhci-mtk
[ 55.325258] option 1-2:1.0: GSM modem (1-port) converter detected
[ 55.332247] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 55.340934] option 1-2:1.1: GSM modem (1-port) converter detected
[ 55.347951] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 55.356557] option 1-2:1.2: GSM modem (1-port) converter detected
[ 55.363615] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 55.372352] option 1-2:1.3: GSM modem (1-port) converter detected
[ 55.379278] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB3
[ 55.391192] GobiNet_q 1-2:1.4 usb0: register 'GobiNet_q' at usb-1e1c0000.xhci-2, GobiNet Ethernet Device, 02:50:f4:00:00:00
[ 55.409383] creating qcqmi0
[ 55.421100] GobiNet_q 1-2:1.4 usb0: kevent 12 may have been dropped
[ 55.427424] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 72.685887] GobiNet_q 1-2:1.4 usb0: kevent 12 may have been dropped
[ 72.692255] GobiNet_q 1-2:1.4 usb0: kevent 12 may have been dropped
[ 74.993295] usb 1-2: USB disconnect, device number 3
[ 74.998835] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 75.007513] option 1-2:1.0: device disconnected
[ 75.013118] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 75.021433] option 1-2:1.1: device disconnected
[ 75.026731] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 75.035066] option 1-2:1.2: device disconnected
[ 75.040508] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
[ 75.049003] option 1-2:1.3: device disconnected
[ 75.054957] GobiNet_q 1-2:1.4 usb0: unregister 'GobiNet_q' usb-1e1c0000.xhci-2, GobiNet Ethernet Device
[ 86.570300] usb 1-2: new high-speed USB device number 4 using xhci-mtk
[ 86.723783] option 1-2:1.0: GSM modem (1-port) converter detected
[ 86.730573] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 86.738390] option 1-2:1.1: GSM modem (1-port) converter detected
[ 86.745008] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 86.753133] option 1-2:1.2: GSM modem (1-port) converter detected
[ 86.759961] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 86.768136] option 1-2:1.3: GSM modem (1-port) converter detected
[ 86.775063] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB3
[ 86.785495] GobiNet_q 1-2:1.4 usb0: register 'GobiNet_q' at usb-1e1c0000.xhci-2, GobiNet Ethernet Device, 02:50:f4:00:00:00
[ 86.798148] creating qcqmi0
[ 86.810920] GobiNet_q 1-2:1.4 usb0: kevent 12 may have been dropped
[ 86.817240] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 104.165687] GobiNet_q 1-2:1.4 usb0: kevent 12 may have been dropped
[ 104.172165] GobiNet_q 1-2:1.4 usb0: kevent 12 may have been dropped
[ 106.660523] usb 1-2: USB disconnect, device number 4
[ 106.665999] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 106.674399] option 1-2:1.0: device disconnected
[ 106.679693] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 106.688015] option 1-2:1.1: device disconnected
[ 106.693368] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 106.701646] option 1-2:1.2: device disconnected
[ 106.706943] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
[ 106.715186] option 1-2:1.3: device disconnected
[ 106.720784] GobiNet_q 1-2:1.4 usb0: unregister 'GobiNet_q' usb-1e1c0000.xhci-2, GobiNet Ethernet Device
[ 118.200298] usb 1-2: new high-speed USB device number 5 using xhci-mtk
[ 118.353998] option 1-2:1.0: GSM modem (1-port) converter detected
[ 118.360808] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 118.368785] option 1-2:1.1: GSM modem (1-port) converter detected
[ 118.375588] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 118.383758] option 1-2:1.2: GSM modem (1-port) converter detected
[ 118.390448] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 118.398643] option 1-2:1.3: GSM modem (1-port) converter detected
[ 118.405613] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB3
[ 118.416046] GobiNet_q 1-2:1.4 usb0: register 'GobiNet_q' at usb-1e1c0000.xhci-2, GobiNet Ethernet Device, 02:50:f4:00:00:00
[ 118.428768] creating qcqmi0
[ 118.440938] GobiNet_q 1-2:1.4 usb0: kevent 12 may have been dropped
[ 118.447242] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 135.694172] GobiNet_q 1-2:1.4 usb0: kevent 12 may have been dropped
[ 135.700567] GobiNet_q 1-2:1.4 usb0: kevent 12 may have been dropped
[ 138.016397] usb 1-2: USB disconnect, device number 5
[ 138.021799] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 138.030028] option 1-2:1.0: device disconnected
[ 138.035380] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 138.043649] option 1-2:1.1: device disconnected
[ 138.048888] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 138.057260] option 1-2:1.2: device disconnected
[ 138.062660] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
[ 138.070979] option 1-2:1.3: device disconnected
[ 138.077305] GobiNet_q 1-2:1.4 usb0: unregister 'GobiNet_q' usb-1e1c0000.xhci-2, GobiNet Ethernet Device
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment