Skip to content

Instantly share code, notes, and snippets.

@bakueikozo
Created May 26, 2023 03:26
Show Gist options
  • Save bakueikozo/a99cc443e1b8309775ff4314b1625624 to your computer and use it in GitHub Desktop.
Save bakueikozo/a99cc443e1b8309775ff4314b1625624 to your computer and use it in GitHub Desktop.
渾-Boot 2014.10-RK3399-06-03398-g4e8224e (Mar 22 2021 - 22:41:09), Build: jenkins-SensePassPro_RK3399_JCV_NO_FactoryApp-64
CPU: rk3399
cpu version = 0
CPU's clock information:
aplll = 816000000HZ
apllb = 24000000HZ
gpll = 800000000HZ
aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
aclk_periph_l0 = 266666666HZ, hclk_periph_l0 = 88888888HZ, pclk_periph_l0 = 44444444HZ
hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
cpll = 800000000HZ
dpll = 856000000HZ
vpll = 24000000HZ
npll = 24000000HZ
ppll = 676000000HZ
Board: Rockchip platform Board
Uboot as second level loader
DRAM: Found dram banks: 1
Adding bank:0000000000200000(000000007fe00000)
Reserve memory for trust os.
dram reserve bank: base = 0x08400000, size = 0x01e00000
128 MiB
SdmmcInit = 0 20
storage init OK!
Using default environment
GetParam
Load FDT from boot image.
active dts = rk3399-sensepass_boe.dtb
power key: bank-0 pin-5
can't find dts node for fixed
usb bc: can find node by path: /dwc-control-usb/usb_bc
dwc_otg_check_dpdm: usb bc disconnected
pmic:rk808
can't find dts node for pwm1
set pwm voltage ok,pwm_id =2 vol=900000,pwm_value=16
CPU's clock information:
aplll = 816000000HZ
apllb = 24000000HZ
gpll = 800000000HZ
aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
aclk_periph_l0 = 266666666HZ, hclk_periph_l0 = 88888888HZ, pclk_periph_l0 = 44444444HZ
hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
cpll = 800000000HZ
dpll = 856000000HZ
vpll = 24000000HZ
npll = 24000000HZ
ppll = 676000000HZ
Can't find dts node for fuel guage cw201x
can't find dts node for ec-battery
Can't find dts node for charger bq25700
invalide header tag
ca head not found
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2019-06-13#1.15
empty serial no.
normal boot.
checkKey
vbus = 0
no fuel gauge found
no fuel gauge found
Rockchip UBOOT DRM driver version: develop-v1.0.0
failed to find panel driver
no old_panel-init-sequence
read logo on state from dts [1]
no fuel gauge found
rockchip_panel_deinit: failed to find panel deinit funcs
Using display timing dts
Detailed mode clock 63600 kHz, flags[a]
H: 0720 0770 0820 0870
V: 1280 1288 1290 1302
bus_format: 100e
rk lcdc - 0 dclk set: dclk = 63600000HZ, pll select = 1, div = 1
Warn: vop clk request 63600000hz, but real clock is 63599999hz
final DSI-Link bandwidth: 426 Mbps x 4
read vendor_storage is rk3399-sensepass_boe.dtb
enable_watchdog in u-boot
set vccio_enable_gpio lcd_type_in_vendor_storage=1!
read vendor_storage is rk3399-sensepass_boe.dtb
read_boe_lcd_id ID is : 11 22 0
read lcd type is BOE!
Hit any key to stop autoboot: 0
Secure Boot state: 0
kernel @ 0x00280000 (0x01316008)
ramdisk @ 0x04bf0000 (0x001e1690)
bootrk: do_bootm_linux...
Loading Device Tree to 0000000004600000, end 0000000004616761 ... OK
Add bank:0000000000200000, 0000000008200000
Add bank:000000000a200000, 0000000075e00000
WARNING: could not set reg FDT_ERR_BADOFFSET.
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Initializing cgroup subsys schedtune
[ 0.000000] Linux version 4.4.126 (bijenkins@SZ-OFFICE-192-168-8-81) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #1 SMP PREEMPT Mon Mar 22 22:43:17 CST 2021
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB
[ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07eefb000 s45528 r8192 d32296 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 507912
[ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 coherent_pool=1m console=ttyFIQ0 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(uboot_ro),0x00002000@0x00008000(trust_ro),0x00002000@0x0000A000(misc),0x00008000@0x0000C000(resource),0x0000C000@0x00014000(kernel),0x00010000@0x00020000(boot),0x00010000@0x00030000(recovery),0x00008000@0x00040000(backup),0x00040000@0x00048000(cache),0x00300000@0x00088000(system),0x00008000@0x00388000(metadata),0x00000040@0x00390000(verity_mode),0x00002000@0x00390040(baseparameter),0x00000400@0x00392040(frp),-@0x00392440(userdata) storagemedia=emmc androidboot.oem_unlocked=0 uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2021-03-22_22:41:09 SecureBootCheckOk=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] software IO TLB [mem 0x7eeb3000-0x7eef3000] (0MB) mapped at [ffffffc07eeb3000-ffffffc07eef2fff]
[ 0.000000] Memory: 1986280K/2064384K available (11326K kernel code, 1880K rwdata, 5448K rodata, 832K init, 1121K bss, 61720K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] .init : 0xffffff80090f0000 - 0xffffff80091c0000 ( 832 KB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008b90000 ( 11328 KB)
[ 0.000000] .rodata : 0xffffff8008b90000 - 0xffffff80090f0000 ( 5504 KB)
[ 0.000000] .data : 0xffffff80091c0000 - 0xffffff8009396008 ( 1881 KB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[ 0.000000] ITS: allocated 65536 Devices @a200000 (psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x000000000a280000
[ 0.000000] ITS: Allocated 1792 chunks for LPIs
[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] CPU0: using LPI pending table @0x000000000a290000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[ 0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.009914] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.021188] pid_max: default: 32768 minimum: 301
[ 0.026318] Security Framework initialized
[ 0.030818] SELinux: Initializing.
[ 0.034757] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.042118] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.050732] Initializing cgroup subsys memory
[ 0.055542] Initializing cgroup subsys freezer
[ 0.061322] sched-energy: Sched-energy-costs installed from DT
[ 0.067741] CPU0: update cpu_capacity 401
[ 0.072192] ASID allocator initialised with 32768 entries
[ 0.094997] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.105083] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.128760] Detected VIPT I-cache on CPU1
[ 0.128792] CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.128825] CPU1: using LPI pending table @0x000000000a3f0000
[ 0.128868] CPU1: update cpu_capacity 401
[ 0.128871] CPU1: Booted secondary processor [410fd034]
[ 0.138739] Detected VIPT I-cache on CPU2
[ 0.138758] CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.138790] CPU2: using LPI pending table @0x000000007c020000
[ 0.138816] CPU2: update cpu_capacity 401
[ 0.138820] CPU2: Booted secondary processor [410fd034]
[ 0.148769] Detected VIPT I-cache on CPU3
[ 0.148787] CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.148819] CPU3: using LPI pending table @0x000000007c060000
[ 0.148844] CPU3: update cpu_capacity 401
[ 0.148847] CPU3: Booted secondary processor [410fd034]
[ 0.158817] Detected PIPT I-cache on CPU4
[ 0.158846] CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.158885] CPU4: using LPI pending table @0x000000007c0b0000
[ 0.158924] CPU4: update cpu_capacity 1024
[ 0.158927] CPU4: Booted secondary processor [410fd082]
[ 0.168841] Detected PIPT I-cache on CPU5
[ 0.168858] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.168895] CPU5: using LPI pending table @0x000000007c0e0000
[ 0.168921] CPU5: update cpu_capacity 1024
[ 0.168924] CPU5: Booted secondary processor [410fd082]
[ 0.169008] Brought up 6 CPUs
[ 0.311367] SMP: Total of 6 processors activated.
[ 0.316525] CPU features: detected feature: GIC system register CPU interface
[ 0.324364] CPU: All CPU(s) started at EL2
[ 0.328900] alternatives: patching kernel code
[ 0.337646] devtmpfs: initialized
[ 0.355865] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.366585] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.374216] pinctrl core: initialized pinctrl subsystem
[ 0.381446] Failed to find legacy iommu devices
[ 0.386805] NET: Registered protocol family 16
[ 0.392114] schedtune: init normalization constants...
[ 0.397760] schedtune: CLUSTER[0-3] min_pwr: 56 max_pwr: 222
[ 0.404925] schedtune: CPU[0] min_pwr: 0 max_pwr: 222
[ 0.412089] schedtune: CPU[1] min_pwr: 0 max_pwr: 222
[ 0.419253] schedtune: CPU[2] min_pwr: 0 max_pwr: 222
[ 0.426417] schedtune: CPU[3] min_pwr: 0 max_pwr: 222
[ 0.433581] schedtune: CLUSTER[4-5] min_pwr: 65 max_pwr: 1108
[ 0.440745] schedtune: CPU[4] min_pwr: 0 max_pwr: 1108
[ 0.447909] schedtune: CPU[5] min_pwr: 0 max_pwr: 1108
[ 0.455071] schedtune: SYSTEM min_pwr: 121 max_pwr: 4434
[ 0.462235] schedtune: using normalization constants mul: 3862781856 sh1: 1 sh2: 12
[ 0.470637] schedtune: verify normalization constants...
[ 0.476464] schedtune: max_pwr/2^0: 4313 => norm_pwr: 1024
[ 0.482585] schedtune: max_pwr/2^1: 2156 => norm_pwr: 511
[ 0.488700] schedtune: max_pwr/2^2: 1078 => norm_pwr: 255
[ 0.494813] schedtune: max_pwr/2^3: 539 => norm_pwr: 127
[ 0.500927] schedtune: max_pwr/2^4: 269 => norm_pwr: 63
[ 0.507041] schedtune: max_pwr/2^5: 134 => norm_pwr: 31
[ 0.513155] schedtune: configured to support 5 boost groups
[ 0.532634] cpuidle: using governor ladder
[ 0.550493] cpuidle: using governor menu
[ 0.554826] Registered FIQ tty driver
[ 0.559216] vdso: 2 pages (1 code @ ffffff8008b96000, 1 data @ ffffff80091c4000)
[ 0.567357] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.575821] DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.601343] of_get_gpio_init_config:gpio[0] = 41, value = 1
[ 0.607495] of_get_gpio_init_config:gpio[1] = 52, value = 1
[ 0.613654] of_get_gpio_init_config:gpio[2] = 55, value = 1
[ 0.619824] of_get_gpio_init_config:gpio[3] = 155, value = 0
[ 0.626101] of_get_gpio_init_config:gpio[4] = 12, value = 1
[ 0.634687] console [pstore-1] enabled
[ 0.638992] pstore: Registered ramoops as persistent store backend
[ 0.645783] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[ 0.684825] iommu: Adding device ff650000.vpu_service to group 0
[ 0.691512] iommu: Adding device ff660000.rkvdec to group 1
[ 0.697688] iommu: Adding device ff670000.iep to group 2
[ 0.703603] iommu: Adding device ff8f0000.vop to group 3
[ 0.709502] iommu: Adding device ff900000.vop to group 4
[ 0.715448] iommu: Adding device ff910000.isp to group 5
[ 0.721344] iommu: Adding device ff920000.isp to group 6
[ 0.727829] rk_iommu ff670800.iommu: can't get aclk
[ 0.733193] rk_iommu ff670800.iommu: can't get hclk
[ 0.739447] SCSI subsystem initialized
[ 0.743731] usbcore: registered new interface driver usbfs
[ 0.749792] usbcore: registered new interface driver hub
[ 0.755702] usbcore: registered new device driver usb
[ 0.761589] media: Linux media interface: v0.10
[ 0.766593] Linux video capture interface: v2.00
[ 0.771833] pps_core: LinuxPPS API ver. 1 registered
[ 0.777287] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.787332] PTP clock support registered
[ 0.793180] Advanced Linux Sound Architecture Driver Initialized.
[ 0.800326] Bluetooth: Core ver 2.21
[ 0.804283] NET: Registered protocol family 31
[ 0.809162] Bluetooth: HCI device and connection manager initialized
[ 0.816142] Bluetooth: HCI socket layer initialized
[ 0.821500] Bluetooth: L2CAP socket layer initialized
[ 0.827081] Bluetooth: SCO socket layer initialized
[ 0.833175] rockchip-cpuinfo cpuinfo: Serial : 059894f6cd50e5da
[ 0.840290] clocksource: Switched to clocksource arch_sys_counter
[ 0.890451] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 0.899464] NET: Registered protocol family 2
[ 0.904680] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.912749] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.920290] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.927528] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.934176] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.941439] NET: Registered protocol family 1
[ 0.946614] Trying to unpack rootfs image as initramfs...
[ 1.049013] Freeing initrd memory: 1924K
[ 1.053965] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 1.063034] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.074839] audit: initializing netlink subsys (disabled)
[ 1.080833] audit: type=2000 audit(0.956:1): initialized
[ 1.091870] VFS: Disk quotas dquot_6.6.0
[ 1.096305] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.104877] Registering sdcardfs 0.1
[ 1.109400] fuse init (API version 7.23)
[ 1.114803]
[ 1.114803] TEE Core Framework initialization (ver 1:0.1)
[ 1.122376] TEE armv7 Driver initialization
[ 1.127347] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[ 1.134623] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[ 1.141496] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[ 1.153232] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 1.161377] io scheduler noop registered
[ 1.165850] io scheduler cfq registered (default)
[ 1.172215] phy phy-ff770000.syscon:[email protected]: Failed to get VBUS supply regulator
[ 1.182286] phy phy-ff770000.syscon:[email protected]: Failed to get VBUS supply regulator
[ 1.195316] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[ 1.202312] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[ 1.209305] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[ 2.216975] pll lock timeout!
[ 2.220248] phy phy-pcie-phy.7: phy poweron failed --> -22
[ 2.226288] rockchip-pcie f8000000.pcie: fail to power on phy, err -22
[ 2.233570] rockchip-pcie: probe of f8000000.pcie failed with error -22
[ 2.241502] backlight supply power not found, using dummy regulator
[ 2.248990] iep: failed to find iep power down clock source.
[ 2.255790] IEP Power ON
[ 2.258802] IEP Power OFF
[ 2.261758] IEP Driver loaded succesfully
[ 2.266418] Module initialized.
[ 2.270247] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[ 2.277407] rk-vcodec ff650000.vpu_service: probe device
[ 2.283446] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[ 2.291576] rk-vcodec ff650000.vpu_service: could not find power_model node
[ 2.299276] rk-vcodec ff650000.vpu_service: init success
[ 2.305313] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[ 2.312139] rk-vcodec ff660000.rkvdec: probe device
[ 2.317660] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[ 2.325108] rk-vcodec ff660000.rkvdec: could not find power_model node
[ 2.332286] rk-vcodec ff660000.rkvdec: init success
[ 2.339245] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 2.347574] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 2.359046] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 2.367370] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 2.379402] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 2.386924] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
[ 2.397147] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment