Skip to content

Instantly share code, notes, and snippets.

@bakueikozo

bakueikozo/FUGU FG-A9 Wifi Camera bootlog

Created August 24, 2022 15:33
Show Gist options
  • Save bakueikozo/b4acdc5358fc1f1cec989a6fb2011e59 to your computer and use it in GitHub Desktop.
Save bakueikozo/b4acdc5358fc1f1cec989a6fb2011e59 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
FUGU FG-A9 Wifi Camera bootlog
U-Boot 2013.10.0-AK_V2.0.04 (Nov 02 2020 - 14:14:37)
DRAM: 64 MiB
8 MiB
Create flash partition table init OK!
ANYKA SDHC/MMC4.0: 0
Load Env CRC OK!
In: serial
Out: serial
Err: serial
Net: AKEthernet-0
Hit any key to stop autoboot: 0
SF: 1307064 bytes @ 0x36000 Read: OK
## Booting kernel from Legacy Image at 81808000 ...
Image Name: Linux-3.4.35
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1307000 Bytes = 1.2 MiB
Load Address: 81808000
Entry Point: 81808040
Verifying Checksum ... OK
XIP Kernel Image ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Anyka Linux Kernel Version: 2.5.02
Booting Linux on physical CPU 0
Linux version 3.4.35 (ma@ma-PC) (gcc version 4.8.5 (anyka (gcc-4.8.5 + binutils-2.24 + ulcibc-0.9.33.2)(20170223)) ) #5 Mon Nov 2 14:29:31 CST 2020
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: Cloud39E_AK3918E+H42_V1.0.2
Memory policy: ECC disabled, Data cache writeback
ANYKA CPU AK3918 (ID 0x20150200)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 10160
Kernel command line: console=ttySAK0,115200n8 root=/dev/mtdblock4 rootfstype=squashfs init=/sbin/init mem=64M memsize=64M
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 40MB = 40MB total
Memory: 36768k/36768k available, 4192k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xc3000000 - 0xff000000 ( 960 MB)
lowmem : 0xc0000000 - 0xc2800000 ( 40 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0355000 (3380 kB)
.init : 0xc0355000 - 0xc036e000 ( 100 kB)
.data : 0xc036e000 - 0xc0391058 ( 141 kB)
.bss : 0xc039107c - 0xc03aea18 ( 119 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:95
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
AK39 console driver initial
console [ttySAK0] enabled
Calibrating delay loop... 199.06 BogoMIPS (lpj=995328)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x81a97170 - 0x81a971c8
devtmpfs: initialized
NET: Registered protocol family 16
On-chip L2 memory initialized
AK39 clocks: CPU 400MHz, MEM 200MHz, ASIC 100MHz
Anyka platform share gpio locks initialize.
bio: create slab <bio-0> at 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-ak39 i2c-ak39: i2c-0: AK39 I2C adapter
Linux video capture interface: v2.00
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
exFAT: Version 1.2.9
jffs2: version 2.2. c 2001-2006 Red Hat, Inc.
msgmni has been set to 71
io scheduler noop registered
io scheduler cfq registered (default)
AK39xx uart driver init, (c) 2013 ANYKA
ak39-uart.0: ttySAK0 at MMIO 0x20130000 (irq = 10) is a AK39
ion: failed to create debug files.
brd: module loaded
loop: module loaded
AK Motor Driver (c) 2013 ANYKA
akgpio driver initialize.
@@@ [akpcm_init]: enter @@@
@@@ [akpcm_probe]: enter @@@
akpcmL0->ak39_codec_probe enter...
akpcm probe: mic on
ak39_set_hp_power 1,soft_de_pipa=1
Headphone driver will power on.
akpcm_probe: OK
akisp_init
Start to init Anyka SPI Flash...
Start to init Anyka partition table...
AK SPI Driver, (c) 2012 ANYKA
akpi regs: SPICON:00000152, SPISTA:00000015, SPIINT:00000000.
ak-spi ak-spi: master is unqueued, this is deprecated
ak_spi setup the master.
pre-scaler=2 (wanted 20Mhz, got 16Mhz)
ak spiflash probe enter.
pre-scaler=2 (wanted 20Mhz, got 16Mhz)
ak_spi_setupxfer,con:00000252.
akspi flash ID: 0x00d84017
ak-spiflash spi0.0: XD25Q64B (8192 Kbytes)
FHA:partition lib version: V1.0.11
FHA:boot block num offset:427
FHA:Sflash_Get_Partition_Startpage g_boot_len:832
mtd_part[0]:
name = KERNEL
size = 0x180000
offset = 0x36000
mask_flags = 0x1
mtd_part[1]:
name = MAC
size = 0x1000
offset = 0x1b6000
mask_flags = 0x1
mtd_part[2]:
name = ENV
size = 0x1000
offset = 0x1b7000
mask_flags = 0x1
mtd_part[3]:
name = A
size = 0x180000
offset = 0x1b8000
mask_flags = 0x1
mtd_part[4]:
name = B
size = 0x199000
offset = 0x338000
mask_flags = 0x1
mtd_part[5]:
name = C
size = 0x133000
offset = 0x4d1000
mask_flags = 0x1
mtd_part[6]:
name = D
size = 0xa5000
offset = 0x604000
mask_flags = 0x1
mtd_part[7]:
name = E
size = 0x14e000
offset = 0x6a9000
mask_flags = 0x1
Creating 8 MTD partitions on "spi0.0":
0x000000036000-0x0000001b6000 : "KERNEL"
0x0000001b6000-0x0000001b7000 : "MAC"
0x0000001b7000-0x0000001b8000 : "ENV"
0x0000001b8000-0x000000338000 : "A"
0x000000338000-0x0000004d1000 : "B"
0x0000004d1000-0x000000604000 : "C"
0x000000604000-0x0000006a9000 : "D"
0x0000006a9000-0x0000007f7000 : "E"
Init AK SPI Flash finish.
akspi master initialize success, use for DMA mode.
AK39E_MAC Ethernet Driver, V1.0
ak-rtc ak-rtc: rtc core: registered ak-rtc as rtc0
i2c /dev entries driver
AK MCI Driver (c) 2010 ANYKA
akmci ak_sdio: pdev->name:ak_sdio request gpio irq ret = 0, irq=78
akmci ak_sdio: Mci Interface driver.mmc0. using l2dma, hw IRQ. detect mode:GPIO detect.
TCP: cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
ak-rtc ak-rtc: hctosys: invalid date/time
VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
devtmpfs: mounted
Freeing init memory: 100K
mount all file system...
starting mdev...
**************************
Love Linux ! ! !
**************************
200+0 records in
200+0 records out
102400 bytes (100.0KB) copied, 0.025321 seconds, 3.9MB/s
V380E login: === adc ret : 443 ===
FIRMWARE_TYPE_AKCARD_MINI_Q7H_MB battery adc value: 443
=============================================================
prerun ver: 3.1.7_20190507_f201a07[build:Sep 5 2019_19:57:34]
=============================================================
V380E login: root
Password:
=============================
| plug in wifi module |
=============================
[12]check wifi module (lsusb)
player cmd:[/mnt/mtd/audiofile_player /mnt/mtd/mvsound/sf_sysstarting_cn.wav 0]
default log level=4
[ak_ao_set_volume:894] set volume 3
[pcm_dac_set_volume:635] set DEV volume 2
[init_decode_input:143] decode type=6: PCM
[init_decode_input:157] sample_rate=8000, channel_num=1, sample_bits=16
--AudioCodec Version V1.15.06_svn5313--
## ChipIdval = 0x20150200
## CHIP OK
## warn: setting streamlen(20480) is less than default(131072)
## len_buf_in=20480, inbufminlen=128, mType=6
_SD_Decode_Open OK
[ak_adec_open:528] audio decode output, m_ulSize=20480, m_ulDecDataSize=0
[ak_adec_open:531] m_SampleRate=8000, m_Channels=1, m_BitsPerSample=16
[ak_adec_open:533] decode buffer free size=20479
[ak_adec_request_stream:825] request 0x181b0
[write_pcm_thread:330] thread id: 386
--- write_pcm_thread start processing ---
[write_pcm_thread:350] sleep..., decode buffer remain=0
[ak_ao_set_volume:894] set volume 3
[pcm_dac_set_volume:635] set DEV volume 2
=== play type : 0 ===
[write_pcm_thread:352] wakeup...
[ak_adec_get_frame:680] m_SampleRate=8000, m_Channels=1, m_BitsPerSample=16
[set_dac_param:131] dac i@@@ event-1: open @@@
octl set sample: 8000
--AudioFilter Version V1.10.02_svn5270, type:3--
## ChipIdval = 0x20150200
## MSG: insamplerate:8000, outSamplerate:8012, outSrindex:0, inCh:2, outCh:2
## maxinputlen=1024
## MSG: use arithmetic_1 resample
## MSG: resample ratio(i/o) = 0x7fce(Q15), inter_equation=0
## unsupport math0
## resample open ok
## realloc len=1792
@@@ event-3: dac start @@@
Headphone driver already power on.
Play Finished
[ak_adec_notice_stream_end:759] called, decode free size=15323
[notice_stream_end:233] notice_stream_end exit
Login incorrect
V380E login: [check_decode_finished:225] decode finished, remain is 0
[write_pcm_thread:350] sleep..., decode buffer remain=0
[wait_adec_play_finished:424] ao play status=3, user->status=4
[wait_adec_play_finished:430] decode finished...
[wait_adec_play_finished:446] play finished
[ak_ao_set_play_status:866] set ao play status to READDY
[ak_adec_cancel_stream:906] ready to join write_pcm_thread
[write_pcm_thread:352] wakeup...
[write_pcm_thread:375] exit
[ak_adec_cancel_stream:908] write_pcm_thread join OK
--Leave AudioCodec Version V1.15.06_svn5313--
@@@ [playback_pause:970]: wait playback completion ok @@@
--leave AudioFilter Version V1.10.02_svn5270, type:3--
aksensor_module_init
sc2232_probe_id id:0xffff
sc1235_probe_id id:0xffff
sc1345_probe_id id:0xffff
sc1245_set_power_on
==================================
| read sensor id mode |
==================================
Sensor ID checker running ...
ispsdk_lib version:V3.1.00
--- AK_ISP_sdk_init g_fd=4 ---
====== sensor id : 1245 ======
--- AK_ISP_sdk_exit g_fd=4 closed ---
sensor [sc1245] probed !
Sensor ID checker end ...
=============================================================
as9updatednsip ver: 8.5.9.1_20190413_9d4b238[build:Mar 30 2020_15:30:49]
=============================================================
network_info.ini already has correct DEV_ID=44450675 then exit!
=============================================================
watchdog ver: v1.0.0.1
[commit:78264bb 2019-07-25 16:31:35 +0800]
[build:Aug 1 2019_17:49:00]
=============================================================
hw_watchdog_init_hal
hw_watchdog_settimeout_hal
Child PID is 429
=============================================================
eventhub ver: V1.4.4_beta_18a3984[build:Jul 31 2020_11:22:02]
=============================================================
updatednsip_r Child PID is 438
=============================================================
as9updatednsip ver: 8.5.9.1_20190413_9d4b238[build:Mar 30 2020_15:30:49]
=============================================================
Check encrypt calculate ID:144495892 MACID:-1 IPCID:44450675 incorrect!
add client 6877112575488979061
/mnt/mtd/nvipcstart.sh: line 49: /mvs/apps/log_server: not found
updatednsip gethostbyname_r err.
updnsGetHost success
gethost by name fail Domain:
time:312768004,Domain:47.107.163.76
base64:fipwfoE7Sft5n44o1Qbb6g==
before md5:encrypt=fipwfoE7Sft5n44o1Qbb6g==&timestamp=312768004hsshop2016
{"encrypt":"fipwfoE7Sft5n44o1Qbb6g==","timestamp":312768004,"sign":"f8fc62e4aaf6c7ed99e39ec4f93ec618"}
http form post error= connect:: Network is unreachable
47.107.163.76:8002timestamp:0
Check encrypt calculate ID:38259728 MACID:0 IPCID:0 incorrect!
=============================================================
mvrtsp ver: V1.0.7_4e32fe3[build:Jun 11 2020_14:44:01]
==============================================================
=============================================================
eventhub ver: V1.4.4_beta_18a3984[build:Jul 31 2020_11:22:02]
=============================================================
default log level=4
[start_monitor_th:78] start monitor thread
[start_monitor_th:81] start monitor thread ok
[monitor:35] this thread id: 452
===========================
mp ver: 2.17.0.20190115_alpha_02
build : Apr 29 2021_21:06:04
===========================
init param from <record.ini> finished!
============= dev attr ============
lens type: 1
network reset mode: 1
ptz opposite run: 0
vframe encode type: 0
vframe framerate nolimit: 1
aframe encode type: 1
light ctrl: 0
fps-max: d[30]-n[30]
IPC type: 2
===================================
=== firmware type is : AK-MINI-VIDICON ===
Check encrypt calculate ID:144495892 MACID:-1 IPCID:44450675 incorrect!
updatednsip gethostbyname_r err.
updatednsip gethostbyname_r err.
[0:00:25][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:25][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:25][WRN][ulog]Upload device base information failed ! retcode=[-23]
=== product id : 43 ===
fopen: No such file or directory
IFCReadStringOnce Warning:no such file(/tmp/mvs_attr.conf)
IFCReadStringOnce Warning:no such file(/tmp/mvs_attr.conf)
==vendor id: 0 == product id: 43 ==
=============== init ==============
time_cnt: 0
ct1: 0
stime_hms: 00-00-00
etime_hms: 00-00-00
ct2: 0
stime_hms: 00-00-00
etime_hms: 00-00-00
ct3: 0
stime_hms: 00-00-00
etime_hms: 00-00-00
area:
========================0
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
------------------------32
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
===================================
================= mini firmware type: 65 =================
>>> no open the region_service
[27]===== go to init network !!! ====
exited, status=255
killall: wifi_connect.sh: no process killed
killall: udhcpc: no process killed
killall: wpa_supplicant: no process killed
killall: updatednsip_r: no process killed
killall: wpa_cli_lite: no process killed
killall: wifi_softap.sh: no process killed
killall: udhcpd: no process killed
killall: hostapd: no process killed
ifconfig: SIOCGIFFLAGS: No such device
check_eth0_mac : eth0 mac get ioctl error!: No such device
[0:00:27][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:27][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:27][WRN][ulog]Upload device base information failed ! retcode=[-23]
insmod: can't insert '/mvs/modules/otg-hs.ko': File exists
[28]check wifi module (lsusb)
updatednsip_r Child PID is 493
=============================================================
as9updatednsip ver: 8.5.9.1_20190413_9d4b238[build:Mar 30 2020_15:30:49]
=============================================================
Check encrypt calculate ID:144495892 MACID:-1 IPCID:44450675 incorrect!
[29]=== wifi module: rtl8188F
updatednsip gethostbyname_r err.
updnsGetHost success
gethost by name fail Domain:
time:312768010,Domain:47.107.163.76
base64:fipwfoE7Sft5n44o1Qbb6g==
before md5:encrypt=fipwfoE7Sft5n44o1Qbb6g==&timestamp=312768010hsshop2016
{"encrypt":"fipwfoE7Sft5n44o1Qbb6g==","timestamp":312768010,"sign":"82c9be0452f05eba48ea7c354db914e3"}
http form post error= connect:: Network is unreachable
47.107.163.76:8002timestamp:0
[0:00:29][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:29][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:29][WRN][ulog]Upload device base information failed ! retcode=[-23]
updatednsip gethostbyname_r err.
updatednsip gethostbyname_r err.
[create_wait_queue:165] Waiting for connect......
[handle_thread:318] thread id: 521
=================== video init in =====>
vi version: libmpi_venc V2.2.06
[ak_vi_match_sensor:881] config_file: /mnt/mtd/isp_sc1245.conf
killall: wifi_connect.sh: no process killed
[isp.conf]version: 3.004_xc, sensor id: 0x1245, style id: 0
[isp.conf]modify time: 2019-7-8 16:01:50
[check_file:347] check isp cfg: /mnt/mtd/isp_sc1245.conf OK
[match_sensor:1179] ak_vi_match_sensor OK
[ak_vi_open:922] register device, dev type: 0
new device
[vi_register_device:717] new dev=0x1403b8
----- libakuio.so V2.0.03 -----
[libakuio][/dev/ion] kernel config reserve mem size: 25165824, 0x1800000
[libakuio]ION: alloc 25165824 bytes for process 442
[libakuio]ION: yield 12 for iad 0xb6f7cc3c
--------------- pmem info ---------------
PMEM_GET_TOTAL_SIZE: 25165824 bytes
PMEM_GET_PHYS: 0x80000000
pmem.vaddr: 0xb4f9f000
--------------- info End ---------------
####akuio pmem init success###
ispsdk_lib version:V3.1.00
--- AK_ISP_sdk_init g_fd=15 ---
sc1245_set_power_on
hight light:
frame_rate=20 max_exp_time=2245 low_light_gain=12
low light:sc1245_set_fps set fps=20 fail
frame_rate=10 max_exp_time=4490 light_gain=4
hight light fps: 20
[isp_set_sensor_fps:1859] set sensor fps: 20
killall: udhcpc: no process killed
ISP: cmd=0x4004497A, err:22, estr:Invalid argument
[set_fps:185] set fps:20 failed
g_r3020:255
register vi device ok, dev_count=1
[ak_vi_open:932] register device OK, pdev: 0x1403b8
[vi_new_user:522] now user_flg=0, user_ref=1
max crop width:1280, height:960
active crop width:1280, height:720
crop left:0, top:0
################ [cwidth]: 1280 [cheighsc1245_set_fps set fps=20 fail
t]: 720 #################
after align: main_width:1280, main_height:720, sub_width:640, sub_width:360
[load_def_awb_step:205] get awb_attr ok, auto_awb_step:30
hight light:
frame_rate=20 max_exp_time=2245 low_lighak_camera_set_parm pcid:1
t_gain=12
[change_fps_ptak_camera_set_parm pcid:1, ch2w:640, ch2h:360
hread:714] thread id: 524
low light:
frame_rate=10 max_exp_time=4490 light_gain=4
hight light fps: 20
[isp_set_sensor_fps:1859] set sensor fps: 20
ISP: cmd=0x4004497A, err:22, estr:Invalid argument
[set_fps:185] set fps:20 failed
killall: wpa_supplicant: no process killed
init CROP succeedded! reset to CROP[1280, 720]
video channel attr:
channel_attr_main_width <1280>, channel_attr_main_height <720>
channel_attr_sub_width <640>, channel_attr_sub_height <360>
channel_attr_crop_left <0>, channel_attr_crop_top <0>
channel_attr_crop_width <1280>, channel_attr_crop_height <720>
[isp_set_sensor_fps:1859] set sensor fps: 25
[init_vi:1135] capture fps: 25
video input info:
main_w[1280], main_h[720], sub_w[640], sub_h[360]
[init_video:1223] start capture ...
[malloc_capture_buffers:115] ion_mem: 0xb5393800, temp: 0x803f4800
[malloc_capture_buffers:122] n_buffers: 0, start: 0xb5393800, length: 2535424
[malloc_capture_buffers:122] n_buffers: 1, start: 0xb55fe800, length: 2535424
[malloc_capture_buffers:122] n_buffers: 2, start: 0xb5869800, length: 2535424
[malloc_capture_buffers:122] n_buffers: 3, start: 0xb5ad4800, length: 2535424
[malloc_capture_buffers:128] set buffer size: 2535424 ok
[isp_vi_capture_on:719] stream on, drop first 4 frames
killed by signal 9
killall: wpa_cli_lite: no process killed
killall: wifi_softap.sh: no process killed
[0:00:31][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:31][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:31][WRN][ulog]Upload device base information failed ! retcode=[-23]
killall: udhcpd: no process killed
killall: hostapd: no process killed
updatednsip_r Child PID is 539
=============================================================
as9updatednsip ver: 8.5.9.1_20190413_9d4b238[build:Mar 30 2020_15:30:49]
=============================================================
Check encrypt calculate ID:144495892 MACID:-1 IPCID:44450675 incorrect!
updatednsip gethostbyname_r err.
updnsGetHost success
gethost by name fail Domain:
time:312768015,Domain:47.107.163.76
base64:fipwfoE7Sft5n44o1Qbb6g==
before md5:encrypt=fipwfoE7Sft5n44o1Qbb6g==&timestamp=312768015hsshop2016
{"encrypt":"fipwfoE7Sft5n44o1Qbb6g==","timestamp":312768015,"sign":"221dd55e027a32d3ace29f14d5a8b870"}
http form post error= connect:: Network is unreachable
47.107.163.76:8002timestamp:0
[0:00:33][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:33][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:33][WRN][ulog]Upload device base information failed ! retcode=[-23]
ioctl SIOCSIFADDR 1 error: No such device
[reload_config_awb_step:225] get awb_attr ok, cur auto_awb_step:10, set to step:30
check_wifi_hw_exist: ioctl: No such device
check_wifi_hw_exist: ioctl: No such device
check_wifi_hw_exist: ioctl: No such device
[get_v4l2_ptr:409] select timeout! tv.tv_sec=0
[isp_vi_capture_on:725] get v4l2 frame ptr failed!
[init_video:1225] vi capture on failed
check_wifi_hw_exist: ioctl: No such device
updatednsip gethostbyname_r err.
updatednsip gethostbyname_r err.
[0:00:35][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:35][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:35][WRN][ulog]Upload device base information failed ! retcode=[-23]
check_wifi_hw_exist: ioctl: No such device
[init_video:1223] start capture ...
[set_buffer_size:154] REQBUFS failed!
[set_buffer_size:158] VIDIOC_REQBUFS, Device or resource busy
[set_v4l2_qbuf:357] VIDIOC_QBUF, Invalid argument, i: 0
[isp_vi_capture_on:719] stream on, drop first 4 frames
[0:00:37][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:37][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:37][WRN][ulog]Upload device base information failed ! retcode=[-23]
exited, status=255
updatednsip_r Child PID is 610
=============================================================
as9updatednsip ver: 8.5.9.1_20190413_9d4b238[build:Mar 30 2020_15:30:49]
=============================================================
Check encrypt calculate ID:144495892 MACID:-1 IPCID:44450675 incorrect!
[0:00:39][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:39][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:39][WRN][ulog]Upload device base information failed ! retcode=[-23]
updatednsip gethostbyname_r err.
updnsGetHost success
gethost by name fail Domain:
time:312768021,Domain:47.107.163.76
base64:fipwfoE7Sft5n44o1Qbb6g==
before md5:encrypt=fipwfoE7Sft5n44o1Qbb6g==&timestamp=312768021hsshop2016
{"encrypt":"fipwfoE7Sft5n44o1Qbb6g==","timestamp":312768021,"sign":"4eec2b8e88ca3fe54a6b08b4d61cc677"}
http form post error= connect:: Network is unreachable
47.107.163.76:8002timestamp:0
updatednsip gethostbyname_r err.
updatednsip gethostbyname_r err.
[get_v4l2_ptr:409] select timeout! tv.tv_sec=0
[isp_vi_capture_on:725] get v4l2 frame ptr failed!
[init_video:1225] vi capture on failed
[init_video:1223] start capture ...
[set_buffer_size:154] REQBUFS failed!
[set_buffer_size:158] VIDIOC_REQBUFS, Device or resource busy
[set_v4l2_qbuf:357] VIDIOC_QBUF, Invalid argument, i: 0
[isp_vi_capture_on:719] stream on, drop first 4 frames
[0:00:41][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:41][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:41][WRN][ulog]Upload device base information failed ! retcode=[-23]
### mv_Sendto_Render_Mutex_Lock ###
====== hostapd get result: 619 root 0:00 hostapd /tmp/wificonf/hostapd_use.conf -B
get it !!!
### mv_Sendto_Render_Mutex_Unlock ###
[0:00:43][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:43][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:43][WRN][ulog]Upload device base information failed ! retcode=[-23]
[get_v4l2_ptr:409] select timeout! tv.tv_sec=0
[isp_vi_capture_on:725] get v4l2 frame ptr failed!
[init_video:1225] vi capture on failed
[0:00:45][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:45][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:45][WRN][ulog]Upload device base information failed ! retcode=[-23]
[init_video:1223] start capture ...
[set_buffer_size:154] REQBUFS failed!
[set_buffer_size:158] VIDIOC_REQBUFS, Device or resource busy
[set_v4l2_qbuf:357] VIDIOC_QBUF, Invalid argument, i: 0
[isp_vi_capture_on:719] stream on, drop first 4 frames
[0:00:47][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:47][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:47][WRN][ulog]Upload device base information failed ! retcode=[-23]
exited, status=255
updatednsip_r Child PID is 627
=============================================================
as9updatednsip ver: 8.5.9.1_20190413_9d4b238[build:Mar 30 2020_15:30:49]
=============================================================
Check encrypt calculate ID:144495892 MACID:-1 IPCID:44450675 incorrect!
[0:00:49][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:49][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:49][WRN][ulog]Upload device base information failed ! retcode=[-23]
updatednsip gethostbyname_r err.
updnsGetHost success
gethost by name fail Domain:
time:312768032,Domain:47.107.163.76
base64:fipwfoE7Sft5n44o1Qbb6g==
before md5:encrypt=fipwfoE7Sft5n44o1Qbb6g==&timestamp=312768032hsshop2016
{"encrypt":"fipwfoE7Sft5n44o1Qbb6g==","timestamp":312768032,"sign":"6adbea8599f72cb38d5f01c4c6f216cd"}
[get_v4l2_ptr:409] select timeout! tv.tv_sec=0
[isp_vi_capture_on:725] get v4l2 frame ptr failed!
[init_video:1225] vi capture on failed
[init_video:1223] start capture ...
[set_buffer_size:154] REQBUFS failed!
[set_buffer_size:158] VIDIOC_REQBUFS, Device or resource busy
[set_v4l2_qbuf:357] VIDIOC_QBUF, Invalid argument, i: 0
[isp_vi_capture_on:719] stream on, drop first 4 frames
[0:00:51][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:51][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:51][WRN][ulog]Upload device base information failed ! retcode=[-23]
http form post error= connect:: Operation now in progress
47.107.163.76:8002timestamp:0
updatednsip gethostbyname_r err.
updatednsip gethostbyname_r err.
[0:00:53][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:53][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:53][WRN][ulog]Upload device base information failed ! retcode=[-23]
[get_v4l2_ptr:409] select timeout! tv.tv_sec=0
[isp_vi_capture_on:725] get v4l2 frame ptr failed!
[init_video:1225] vi capture on failed
[0:00:55][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:55][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:55][WRN][ulog]Upload device base information failed ! retcode=[-23]
[init_video:1223] start capture ...
[set_buffer_size:154] REQBUFS failed!
[set_buffer_size:158] VIDIOC_REQBUFS, Device or resource busy
[set_v4l2_qbuf:357] VIDIOC_QBUF, Invalid argument, i: 0
[isp_vi_capture_on:719] stream on, drop first 4 frames
[0:00:57][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:57][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:57][WRN][ulog]Upload device base information failed ! retcode=[-23]
[0:00:59][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:59][WRN][ulog][TCP]DNS parsing error, retcode=[-23]
[0:00:59][WRN][ulog]Upload device base information failed ! retcode=[-23]
[get_v4l2_ptr:409] select timeout! tv.tv_sec=0
[isp_vi_capture_on:725] get v4l2 frame ptr failed!
[init_video:1225] vi capture on failed
Restarting system.
Restarting Linux version 3.4.35 (ma@ma-PC) (gcc version 4.8.5 (anyka (gcc-4.8.5 + binutils-2.24 + ulcibc-0.9.33.2)(20170223)) ) #5 Mon Nov 2 14:29:31 CST 2020
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment