Skip to content

Instantly share code, notes, and snippets.

@bakueikozo

bakueikozo/dmesg output

Created December 18, 2020 17:22
Show Gist options
  • Save bakueikozo/cef37c44736fed1fb38736d1d49e46a1 to your computer and use it in GitHub Desktop.
Save bakueikozo/cef37c44736fed1fb38736d1d49e46a1 to your computer and use it in GitHub Desktop.
Download ZIP
astrocity mini bootup log
Raw
dmesg output
[ 0.000000] .init : 0xc061d000 - 0xc064e9c0 ( 199 kB)
[ 0.000000] .data : 0xc0650000 - 0xc082e400 (1913 kB)
[ 0.000000] .bss : 0xc0830098 - 0xc0972a40 (1291 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:416
[ 0.000000] try to syncboot of clk ats
[ 0.000000] try to syncboot of clk sdmmc2mod
[ 0.000000] try to syncboot of clk uart0
[ 0.000000] try to syncboot of clk pll_ddr1
[ 0.000000] try to syncboot of clk debe0
[ 0.000000] try to syncboot of clk nand
[ 0.000000] try to syncboot of clk dma
[ 0.000000] try to syncboot of clk sat
[ 0.000000] try to syncboot of clk pio
[ 0.000000] try to syncboot of clk mbus
[ 0.000000] try to syncboot of clk drc0
[ 0.000000] try to syncboot of clk mipidphy
[ 0.000000] try to syncboot of clk lcd0ch0
[ 0.000000] try to syncboot of clk axi
[ 0.000000] try to syncboot of clk mipidsi
[ 0.000000] Architected local timer running at 24.00MHz.
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000190] Calibrating delay loop (skipped), value calculated using timer frequency.. 14405.00 BogoMIPS (lpj=24000000)
[ 0.000209] pid_max: default: 4096 minimum: 301
[ 0.000356] Security Framework initialized
[ 0.000379] SELinux: Initializing.
[ 0.000424] SELinux: Starting in permissive mode
[ 0.000435] AppArmor: AppArmor disabled by boot time parameter
[ 0.000504] Mount-cache hash table entries: 512
[ 0.001236] CPU: Testing write buffer coherency: ok
[ 0.001432] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001444] [sunxi_smp_prepare_cpus] enter
[ 0.001481] Setting up static identity map for 0x404dd038 - 0x404dd090
[ 0.003333] CPU1: Booted secondary processor
[ 0.003333] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.003333] CPU2: Booted secondary processor
[ 0.003333] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.003333] CPU3: Booted secondary processor
[ 0.003333] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.050049] Brought up 4 CPUs
[ 0.050067] SMP: Total of 4 processors activated (57623.00 BogoMIPS).
[ 0.050318] devtmpfs: initialized
[ 0.056300] pinctrl core: initialized pinctrl subsystem
[ 0.056738] dummy:
[ 0.058994] NET: Registered protocol family 16
[ 0.065918] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.065990] script_sysfs_init success
[ 0.066021] sunxi_dump_init success
[ 0.066244] sunxi pinctrl probe enter
[ 0.067029] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
[ 0.068231] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[ 0.068407] axp_pinctrl_probe enter...
[ 0.068558] gpiochip_add: registered GPIOs 1024 to 1029 on device: axp-pinctrl
[ 0.068576] mainkey total count : 91
[ 0.068585] mainkey name : product, pin count : 0
[ 0.068593] mainkey name : platform, pin count : 2
[ 0.068603] mainkey name : target, pin count : 0
[ 0.068611] mainkey name : power_sply, pin count : 0
[ 0.068620] mainkey name : key_detect_en, pin count : 0
[ 0.068629] mainkey name : fel_key, pin count : 1
[ 0.068638] mainkey name : gpiokey_para, pin count : 13
[ 0.068649] mainkey name : card_boot, pin count : 0
[ 0.068659] mainkey name : card0_boot_para, pin count : 6
[ 0.068670] mainkey name : card2_boot_para, pin count : 10
[ 0.068681] mainkey name : twi_para, pin count : 2
[ 0.068691] mainkey name : uart_para, pin count : 2
[ 0.068700] mainkey name : force_uart_para, pin count : 2
[ 0.068710] mainkey name : jtag_para, pin count : 4
[ 0.068719] mainkey name : clock, pin count : 0
[ 0.068727] mainkey name : pm_para, pin count : 0
[ 0.068736] mainkey name : dram_para, pin count : 0
[ 0.068745] mainkey name : pm_para, pin count : 0
[ 0.068753] mainkey name : wakeup_src_para, pin count : 1
[ 0.068762] mainkey name : twi0, pin count : 2
[ 0.068771] mainkey name : twi1, pin count : 2
[ 0.068780] mainkey name : twi2, pin count : 2
[ 0.068789] mainkey name : uart0, pin count : 2
[ 0.068798] mainkey name : uart1, pin count : 4
[ 0.068807] mainkey name : uart2, pin count : 2
[ 0.068816] mainkey name : uart3, pin count : 4
[ 0.068825] mainkey name : uart4, pin count : 4
[ 0.068834] mainkey name : spi0, pin count : 4
[ 0.068843] mainkey name : spi1, pin count : 4
[ 0.068853] mainkey name : spi_devices, pin count : 0
[ 0.068862] mainkey name : spi_board0, pin count : 0
[ 0.068871] mainkey name : ctp_para, pin count : 2
[ 0.068880] mainkey name : ctp_list_para, pin count : 0
[ 0.068889] mainkey name : tkey_para, pin count : 0
[ 0.068898] mainkey name : motor_para, pin count : 1
[ 0.068907] map mainkey [motor_para] to pinctrl, map number [2]
[ 0.068918] mainkey name : ths_para, pin count : 0
[ 0.068927] mainkey name : cooler_table, pin count : 0
[ 0.068936] mainkey name : nand0_para, pin count : 19
[ 0.068948] mainkey name : hdmi_ep952_para, pin count : 2
[ 0.068958] mainkey name : disp_init, pin count : 0
[ 0.068968] mainkey name : lcd0_para, pin count : 2
[ 0.068979] mainkey name : lcd1_para, pin count : 22
[ 0.068991] mainkey name : pwm0_para, pin count : 1
[ 0.069001] mainkey name : pwm1_para, pin count : 1
[ 0.069011] mainkey name : pwm2_para, pin count : 1
[ 0.069020] mainkey name : csi0, pin count : 14
[ 0.069030] mainkey name : led_para, pin count : 2
[ 0.069040] mainkey name : mmc0_para, pin count : 7
[ 0.069050] mainkey name : mmc1_para, pin count : 6
[ 0.069061] mainkey name : mmc2_para, pin count : 11
[ 0.069072] mainkey name : usbc0, pin count : 3
[ 0.069083] map mainkey [usbc0] to pinctrl, map number [2]
[ 0.069095] mainkey name : usbc1, pin count : 0
[ 0.069104] mainkey name : usb_feature, pin count : 0
[ 0.069113] mainkey name : msc_feature, pin count : 0
[ 0.069122] mainkey name : ma8601_para, pin count : 2
[ 0.069132] mainkey name : gsensor_para, pin count : 1
[ 0.069142] mainkey name : gsensor_list_para, pin count : 0
[ 0.069151] mainkey name : rf_para, pin count : 0
[ 0.069160] mainkey name : wifi_para, pin count : 2
[ 0.069170] mainkey name : bt_para, pin count : 3
[ 0.069179] mainkey name : gps_para, pin count : 2
[ 0.069189] mainkey name : 3g_para, pin count : 4
[ 0.069199] mainkey name : gy_para, pin count : 0
[ 0.069208] mainkey name : gy_list_para, pin count : 0
[ 0.069217] mainkey name : ls_para, pin count : 1
[ 0.069227] mainkey name : ls_list_para, pin count : 0
[ 0.069236] mainkey name : compass_para, pin count : 0
[ 0.069245] mainkey name : i2s0, pin count : 3
[ 0.069255] mainkey name : i2s1, pin count : 4
[ 0.069264] mainkey name : audio0, pin count : 2
[ 0.069273] mainkey name : pmu1_para, pin count : 0
[ 0.069283] mainkey name : pmu2_para, pin count : 0
[ 0.069292] mainkey name : dvfs_table, pin count : 0
[ 0.069301] mainkey name : Vdevice, pin count : 2
[ 0.069311] mainkey name : s_uart0, pin count : 2
[ 0.069320] mainkey name : s_rsb0, pin count : 2
[ 0.069330] mainkey name : s_jtag0, pin count : 4
[ 0.069340] mainkey name : s_powchk, pin count : 0
[ 0.069349] mainkey name : mali_para, pin count : 0
[ 0.069358] mainkey name : dram_dvfs_table, pin count : 0
[ 0.069368] mainkey name : charging_type, pin count : 0
[ 0.069377] mainkey name : dram_scene_table, pin count : 0
[ 0.069387] mainkey name : usb_special_device, pin count : 0
[ 0.069397] mainkey name : partitions, pin count : 0
[ 0.069406] mainkey name : partitions/boot-res, pin count : 0
[ 0.069416] mainkey name : partitions/env, pin count : 0
[ 0.069426] mainkey name : partitions/boot, pin count : 0
[ 0.069436] mainkey name : partitions/rootfs, pin count : 0
[ 0.069446] mainkey name : partitions/savedata, pin count : 0
[ 0.069456] mainkey name : partitions/misc, pin count : 0
[ 0.069465] mainkey name : partitions/UDISK, pin count : 0
[ 0.069473] axp pinctrl driver probe ok
[ 0.070406] sunxi_dev_init 373 gpio_buttons_data.nbuttons=13
[ 0.070419] sunxi_dev_init 381 gpio_buttons_data.poll_interval=3
[ 0.070436] sunxi_dev_init 414 gpio_buttons[i].gpio=202 gpio_buttons[i].code=103 gpio_buttons[i].debounce_interval=5
[ 0.070454] sunxi_dev_init 414 gpio_buttons[i].gpio=198 gpio_buttons[i].code=105 gpio_buttons[i].debounce_interval=5
[ 0.070472] sunxi_dev_init 414 gpio_buttons[i].gpio=203 gpio_buttons[i].code=108 gpio_buttons[i].debounce_interval=5
[ 0.070490] sunxi_dev_init 414 gpio_buttons[i].gpio=199 gpio_buttons[i].code=106 gpio_buttons[i].debounce_interval=5
[ 0.070508] sunxi_dev_init 414 gpio_buttons[i].gpio=201 gpio_buttons[i].code=30 gpio_buttons[i].debounce_interval=5
[ 0.070526] sunxi_dev_init 414 gpio_buttons[i].gpio=200 gpio_buttons[i].code=48 gpio_buttons[i].debounce_interval=5
[ 0.070544] sunxi_dev_init 414 gpio_buttons[i].gpio=192 gpio_buttons[i].code=46 gpio_buttons[i].debounce_interval=5
[ 0.070561] sunxi_dev_init 414 gpio_buttons[i].gpio=193 gpio_buttons[i].code=45 gpio_buttons[i].debounce_interval=5
[ 0.070579] sunxi_dev_init 414 gpio_buttons[i].gpio=194 gpio_buttons[i].code=21 gpio_buttons[i].debounce_interval=5
[ 0.070597] sunxi_dev_init 414 gpio_buttons[i].gpio=195 gpio_buttons[i].code=44 gpio_buttons[i].debounce_interval=5
[ 0.070615] sunxi_dev_init 414 gpio_buttons[i].gpio=196 gpio_buttons[i].code=59 gpio_buttons[i].debounce_interval=5
[ 0.070633] sunxi_dev_init 414 gpio_buttons[i].gpio=197 gpio_buttons[i].code=60 gpio_buttons[i].debounce_interval=5
[ 0.070651] sunxi_dev_init 414 gpio_buttons[i].gpio=359 gpio_buttons[i].code=116 gpio_buttons[i].debounce_interval=5
[ 0.070956] [sunxi-module]: [sunxi-module.0] probe success
[ 0.070992] script config pll3 to 297 Mhz
[ 0.071005] script config pll4 to 300 Mhz
[ 0.071035] script config pll6 to 600 Mhz
[ 0.071047] script config pll8 to 384 Mhz
[ 0.071065] script config pll9 to 480 Mhz
[ 0.071077] script config pll10 to 297 Mhz
[ 0.071084] sunxi_default_clk_init
[ 0.071091] try to set pll6ahb1 to 200000000
[ 0.071140] try to set ahb clk source to pll6ahb1
[ 0.071148] set ahb clk source to pll6ahb1
[ 0.071157] try to set ahb1 to 200000000
[ 0.071167] try to set apb1 to 100000000
[ 0.076902] bio: create slab <bio-0> at 0
[ 0.076999] [ARISC] :sunxi-arisc driver v1.60
[ 0.113790] [ARISC] :arisc version: [v0.0.23.1]
[ 0.113802] [sunxi-module]: arisc register success
[ 0.328922] [ARISC] :sunxi-arisc driver v1.60 startup succeeded
[ 0.330481] SCSI subsystem initialized
[ 0.330609] usbcore: registered new interface driver usbfs
[ 0.330707] usbcore: registered new interface driver hub
[ 0.330728] usbcore: registered new device driver usb
[ 0.330728] twi_chan_cfg()350 - [twi0] has no twi_regulator.
[ 0.330728] twi_chan_cfg()350 - [twi1] has no twi_regulator.
[ 0.330728] twi_chan_cfg()350 - [twi2] has no twi_regulator.
[ 0.330776] Linux video capture interface: v2.00
[ 0.330032] axp22_board axp22_board: AXP (CHIP ID: 0x06) detected
[ 0.334777] axp22_dcdc1: 1600 <--> 3400 mV at 3000 mV
[ 0.334777] axp22_dcdc2: 600 <--> 1540 mV at 1100 mV
[ 0.334777] axp22_dcdc3: 600 <--> 1860 mV at 1200 mV
[ 0.334777] axp22_dcdc4: 600 <--> 1540 mV at 1100 mV
[ 0.334777] axp22_dcdc5: 1000 <--> 2550 mV at 1500 mV
[ 0.334777] axp22_rtc: 3000 mV
[ 0.334777] axp22_aldo1: 700 <--> 3300 mV at 3000 mV
[ 0.336695] axp22_aldo2: 700 <--> 3300 mV at 2500 mV
[ 0.336868] axp22_aldo3: 700 <--> 3300 mV at 3000 mV
[ 0.336868] axp22_dldo1: 700 <--> 3300 mV at 3300 mV
[ 0.336868] axp22_dldo2: 700 <--> 3300 mV at 700 mV
[ 0.336876] axp22_dldo3: 700 <--> 3300 mV at 700 mV
[ 0.336876] axp22_dldo4: 700 <--> 3300 mV at 700 mV
[ 0.336876] axp22_eldo1: 700 <--> 3300 mV at 3000 mV
[ 0.336876] axp22_eldo1: supplied by axp22_dcdc1
[ 0.336908] axp22_eldo2: 700 <--> 3300 mV at 1800 mV
[ 0.336908] axp22_eldo2: supplied by axp22_dcdc1
[ 0.336908] axp22_eldo3: 700 <--> 3300 mV at 700 mV
[ 0.336908] axp22_eldo3: supplied by axp22_dcdc1
[ 0.336908] axp22_dc5ldo: 700 <--> 1400 mV at 1100 mV
[ 0.336908] axp22_ldoio0: 700 <--> 3300 mV at 3800 mV
[ 0.336908] axp22_ldoio1: 700 <--> 3300 mV at 3800 mV
[ 0.340087] axp22_dc1sw: at 700 mV
[ 0.340087] axp22_dc1sw: supplied by axp22_dcdc1
[ 0.340368] input: axp22-supplyer as /devices/platform/axp22_board/axp22-supplyer.20/input/input0
[ 0.343365] now_rest_vol = 0
[ 0.343585] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.344595] Switching to clocksource arch_sys_counter
[ 0.344893] FS-Cache: Loaded
[ 0.344951] CacheFiles: Loaded
[ 0.344951] [DISP]disp_module_init
[ 0.344951] [DISP]disp_probe
[ 0.344951] disp_init_lcd==============
[ 0.344951] [DISP] OSAL_Pwm_request,line:12: OSAL_Pwm_request pwm 2 fail!
[ 0.344951] [DISP] OSAL_CCMU_SetMclkFreq,line:481: clk 26 freq is 0, wrn
[ 0.353417] lcd_clk_config222 ======lcd ddddclk = 28485600
[ 0.353430] lcd_clk_config 111 ======lcd clk = 341827200, pll_clk = 341827200
[ 0.353441] lcd_clk_config 222 ======lcd clk = 341827200, pll_clk = 341827200
[ 0.353834] [DISP] OSAL_Pwm_Set_Polarity,line:95: OSAL_Pwm_Set_Polarity, handle is NULL!
[ 0.353849] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NULL!
[ 0.353987] start_work================111
[ 0.354003] [DISP]Fb_Init
[ 0.354080] [DISP] parser_disp_init_para,line:130: fetch script data disp_init.screen2_output_type fail
[ 0.354096] [DISP] parser_disp_init_para,line:147: fetch script data disp_init.screen2_output_mode fail
[ 0.354121] [DISP] parser_disp_init_para,line:208: fetch script data disp_init.fb2_format fail
[ 0.354136] [DISP] parser_disp_init_para,line:213: fetch script data disp_init.fb2_scaler_mode_enable fail
[ 0.354151] [DISP] parser_disp_init_para,line:218: fetch script data disp_init.fb2_width fail
[ 0.354165] [DISP] parser_disp_init_para,line:223: fetch script data disp_init.fb2_height fail
[ 0.373618] [DISP]disp_probe finish
[ 0.373736] [DISP]capture_module_init
[ 0.374144] [DISP]capture_probe
[ 0.374176] [DISP]capture finish
[ 0.374184] [DISP]disp_module_init finish
[ 0.374195] [LCD]lcd_module_init
[ 0.374369] LCD_set_panel_funs: ====
[ 0.374390] disp_lcd_get_driver_name, h2009
[ 0.374398] gdisp.init_para.start_process
[ 0.374426] start_work================111
[ 0.374434] extern hdmi type...
[ 0.374452] disp_lcd_get_driver_name, h2009
[ 0.374459] gdisp.init_para.start_process
[ 0.374472] start_work================111
[ 0.374479] extern hdmi type...
[ 0.374492] disp_lcd_get_driver_name, h2009
[ 0.374500] gdisp.init_para.start_process
[ 0.374513] start_work================111
[ 0.374520] extern hdmi type...
[ 0.374533] disp_lcd_get_driver_name, h2009
[ 0.374540] gdisp.init_para.start_process
[ 0.374553] start_work================111
[ 0.374560] extern hdmi type...
[ 0.374572] disp_lcd_get_driver_name, h2009
[ 0.374579] gdisp.init_para.start_process
[ 0.374592] start_work================111
[ 0.374599] extern hdmi type...
[ 0.374611] disp_lcd_get_driver_name, h2009
[ 0.374619] gdisp.init_para.start_process
[ 0.374631] start_work================111
[ 0.374638] extern hdmi type...
[ 0.374651] disp_lcd_get_driver_name, h2009
[ 0.374658] gdisp.init_para.start_process
[ 0.374671] start_work================111
[ 0.374678] extern hdmi type...
[ 0.374690] disp_lcd_get_driver_name, h2009
[ 0.374699] gdisp.init_para.start_process
[ 0.374712] start_work================111
[ 0.374718] extern hdmi type...
[ 0.374734] disp_lcd_get_driver_name, h2009
[ 0.374741] gdisp.init_para.start_process
[ 0.374754] start_work================111
[ 0.374761] extern hdmi type...
[ 0.374771] [LCD]lcd_module_init finish
[ 0.384049] [sunxi_hci_sunxi]: sunxi-ehci1(restrict_gpio) is invalid
[ 0.384064] [sunxi_hci_sunxi]: sunxi-ehci1(drv vbus) is invalid
[ 0.384077] [sunxi_hci_sunxi]: get usb_regulator is nocare
[ 0.384104] [sunxi_hci_sunxi]: sunxi-ohci1(restrict_gpio) is invalid
[ 0.384114] [sunxi_hci_sunxi]: sunxi-ohci1(drv vbus) is invalid
[ 0.384125] [sunxi_hci_sunxi]: get usb_regulator is nocare
[ 0.384328] [usb_manager]: CONFIG_USB_SUNXI_USB0_OTG
[ 0.384352] get usbc0(usb_restrict pin) failed
[ 0.384679] [sw_udc]: udc_init: version 20080411
[ 0.385109] [ddrfreq] dram_clk value is 600
[ 0.385118] [ddrfreq] sunxi_ddrfreq_max=600000
[ 0.385127] [ddrfreq] dram_type value is 3
[ 0.385136] [ddrfreq] dram_zq value is 0x3bbb
[ 0.385145] [ddrfreq] dram_odt_en value is 1
[ 0.385154] [ddrfreq] dram_para1 value is 0x10e20100
[ 0.385163] [ddrfreq] dram_para2 value is 0x0
[ 0.385171] [ddrfreq] dram_mr0 value is 0x1c70
[ 0.385179] [ddrfreq] dram_mr1 value is 0x40
[ 0.385188] [ddrfreq] dram_mr2 value is 0x18
[ 0.385196] [ddrfreq] dram_mr3 value is 0x0
[ 0.385205] [ddrfreq] dram_tpr0 value is 0x47a14f
[ 0.385214] [ddrfreq] dram_tpr1 value is 0x1c2294c
[ 0.385223] [ddrfreq] dram_tpr2 value is 0x69049
[ 0.385232] [ddrfreq] dram_tpr3 value is 0x0
[ 0.385240] [ddrfreq] dram_tpr4 value is 0x0
[ 0.385248] [ddrfreq] dram_tpr5 value is 0x0
[ 0.385256] [ddrfreq] dram_tpr6 value is 0x0
[ 0.385265] [ddrfreq] dram_tpr7 value is 0x0
[ 0.385273] [ddrfreq] dram_tpr8 value is 0x0
[ 0.385282] [ddrfreq] dram_tpr9 value is 0x0
[ 0.385290] [ddrfreq] dram_tpr10 value is 0x0
[ 0.385298] [ddrfreq] dram_tpr11 value is 0x0
[ 0.385307] [ddrfreq] dram_tpr12 value is 168
[ 0.385314] [ddrfreq] sunxi_ddrfreq_min=168000
[ 0.385323] [ddrfreq] dram_tpr13 value is 0x10901
[ 0.385469] [dsm] use sysconfig
[ 0.385478] [dsm] -----------Dram scene-freq Table------------
[ 0.385489] [dsm] scene = 0 frequency = 600000KHz
[ 0.385499] [dsm] scene = 1 frequency = 360000KHz
[ 0.385508] [dsm] scene = 2 frequency = 240000KHz
[ 0.385516] [dsm] scene = 3 frequency = 168000KHz
[ 0.385524] [dsm] --------------------------------------------
[ 0.385625] [ddrfreq] LV_count value is 3
[ 0.385647] [ddrfreq] ---------------Dram V-F Table---------------
[ 0.385657] [ddrfreq] voltage = 1100mv frequency = 552000KHz
[ 0.385666] [ddrfreq] voltage = 1100mv frequency = 360000KHz
[ 0.385675] [ddrfreq] voltage = 1100mv frequency = 0KHz
[ 0.385683] [ddrfreq] --------------------------------------------
[ 0.385841] [ddrfreq] last_vdd=1100
[ 0.385909] [ddrfreq] __sram_start: 0xc082f000, __sram_end: 0xc0830074, __sram_text_start: 0xf0000000, __sram_data_end: 0xf0001074
[ 0.385921] [ddrfreq] sunxi dramfreq probe ok!
[ 0.386233] NET: Registered protocol family 2
[ 0.396783] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.397359] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.397494] TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
[ 0.397636] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.397647] TCP: reno registered
[ 0.397905] NET: Registered protocol family 1
[ 0.398253] RPC: Registered named UNIX socket transport module.
[ 0.398264] RPC: Registered udp transport module.
[ 0.398272] RPC: Registered tcp transport module.
[ 0.398280] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.398986] [pm]aw_pm_init!
[ 0.398998] standby_mode = 1.
[ 0.399006] wakeup src cnt is : 1.
[ 0.399016] [exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
[ 0.399026] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x80
[ 0.399037] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
[ 0.399048] sunxi_reg_init enter
[ 0.399698] audit: initializing netlink socket (disabled)
[ 0.399739] type=2000 audit(0.396:1): initialized
[ 0.401721] NTFS driver 2.1.30 [Flags: R/W].
[ 0.401896] fuse init (API version 7.18)
[ 0.402299] msgmni has been set to 487
[ 0.402448] SELinux: Registering netfilter hooks
[ 0.403866] NET: Registered protocol family 38
[ 0.403989] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.404006] io scheduler noop registered
[ 0.404014] io scheduler deadline registered
[ 0.404095] io scheduler cfq registered (default)
[ 0.404121] pwm module init!
[ 0.404491] [HDMI]ep952_module_init begin
[ 0.404500] hdmi used.
[ 0.404511] ddc i2c id = 0
[ 0.404552] ddc_i2c_detect=============
[ 0.404561] [DDC_I2C] ddc_i2c_detect, get right i2c adapter, id=0
[ 0.404668] ddc_i2c_detect=============
[ 0.404676] [ERR]:ddc_i2c_detect err.
[ 0.404688] hdmi i2c id = 1
[ 0.404725] hdmi_i2c_detect=============
[ 0.404733] err.
[ 0.404740] hdmi_i2c_detect=============
[ 0.404748] hdmi_i2c_detect==111111===========
[ 0.404758] [DISP_I2C] hdmi_i2c_detect, get right i2c adapter, id=1, i2c adapter=cb922010
[ 0.404854] hdmi_i2c_probe:447
[ 0.404862] hdmi_i2c_probe:450
[ 0.404869] hdmi_parse_config:108
[ 0.404877] hdmi_parse_config:117
[ 0.404884] gpio get success!
[ 0.404892] hdmi_parse_config:117
[ 0.404899] gpio get success!
[ 0.404905] hdmi_parse_config:133
[ 0.404913] EP952 Code Version : 52.1
[ 0.404921] hdmi_gpio_config:141
[ 0.404929] hdmi_gpio_config: gpio_info->mul_sel = 1
[ 0.416691] hdmi_gpio_config:141
[ 0.416700] hdmi_gpio_config: gpio_info->mul_sel = 1
[ 0.430020] hdmi_gpio_config:141
[ 0.430029] hdmi_gpio_config: gpio_info->mul_sel = 7
[ 0.444515] < EP952 Tx Power Down >
[ 0.446929] < EP952 Audio_Mute_enable >
[ 0.447539] < EP952 Video_Mute_enable >
[ 0.448149] User define - Disable HDCP function
[ 0.451402] gdisp.init_para.start_process
[ 0.451411] ep952_thread:237
[ 0.451432] start_work================111
[ 0.451441] extern hdmi type...
[ 0.451451] hdmi register
[ 0.451458] bsp_disp_ep952_set_mode: ====
[ 0.451474] disp_lcd_get_driver_name, h2009
[ 0.451482] drv_lcd_enable: ====
[ 0.451673] lcd_clk_config222 ======lcd ddddclk = 28485600
[ 0.451690] lcd_clk_config 111 ======lcd clk = 341827200, pll_clk = 341827200
[ 0.451701] lcd_clk_config 222 ======lcd clk = 341827200, pll_clk = 341827200
[ 0.452701] [LCD]open, step 0 finish
[ 0.453028] sw_uart_get_devinfo()1428 - uart0 has no uart_regulator.
[ 0.453333] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[ 0.453372] sw_console_setup()1188 - console setup baud 115200 parity n bits 8, flow n
[ 0.454081] console [ttyS0] enabled
[ 0.458311] loop: module loaded
[ 0.458666] [NAND]panic_buff_handle 0xccb08000 ,0x4cb08000
[ 0.458682] [NAND][NAND]nand init start, nand0_used_flag is 1
[ 0.458691] [NAND]nand_cache_level err! 0[NAND]nand_capacity_level err! 0
[ 0.458704] regisger ISP =====================
[ 0.458734] [NAND]nand init start
[ 0.458743] NandHwInit: Start Nand Hardware initializing .....
[ 0.458752] kernel:nand version: 3 5018 20181107 16671134
[ 0.458774] [NAND] channel cnt is 1
[ 0.458782] ndfc version: 1
[ 0.458788] ndfc dma mode: MBUS DMA
[ 0.458797] pin count:19
[ 0.458896] NAND_ClkRequest: get pll6 rate 600000000HZ
[ 0.459034] nand:get voltage axp22_dcdc1 ok:cb9abec0
[ 0.459044] Reset NDFC 0
[ 0.459055] NFC Randomizer start.
[ 0.459076] NFC_ResetChip: 0x101, 0x100 0x10095
[ 0.459084] NFC_ResetChip: 0xff, ch: 0
[ 0.459151] [PHY_DBG] CH 0 Nand flash chip id is:0xec 0xdc 0x10 0x95 0x56 0xc6
[ 0.459160] nand id of two channel is not the same, set to 1 channel mode
[ 0.459172] [SCAN_DBG] Nand flash chip id is:0xec 0xdc 0x10 0x95 0x56 0xc6
[ 0.459188] [SCAN_DBG] NandTwoPlaneOp: 1, DriverTwoPlaneOPCfg: 1, 0xfffffdbf
[ 0.459201] nand_para0, id_number_ctl, nand type err! 0
[ 0.459208] _UpdateExtAccessFreqPara: no para.
[ 0.459218] NFC_ResetChip: 0x1000101, 0x100 0x10095
[ 0.459226] NFC_ResetChip: 0xff, ch: 0
[ 0.459263] [PHY_DBG] CH 0 Nand flash chip id is:0x0 0x0 0x0 0x0 0x0 0x0
[ 0.459274] NFC_ResetChip: 0x2000109, 0x100 0x10095
[ 0.459282] NFC_ResetChip: 0xff, ch: 0
[ 0.459296] wrong Rb connect Mode, chip = 2 ,RbConnectMode = 1
[ 0.459329] [PHY_DBG] CH 0 Nand flash chip id is:0x0 0x0 0x0 0x0 0x0 0x0
[ 0.459340] NFC_ResetChip: 0x3000109, 0x100 0x10095
[ 0.459348] NFC_ResetChip: 0xff, ch: 0
[ 0.459362] wrong Rb connect Mode, chip = 3 ,RbConnectMode = 1
[ 0.459394] [PHY_DBG] CH 0 Nand flash chip id is:0x0 0x0 0x0 0x0 0x0 0x0
[ 0.459404] Reset NDFC 0
[ 0.459414] PageCachePool.PageCache0: 0xcb9f4000
[ 0.459427] PageCachePool.PageCache1: 0xcbabc000
[ 0.459439] PageCachePool.PageCache2: 0xcb9ae000
[ 0.459451] PageCachePool.PageCache3: 0xcbac4000
[ 0.459462] PageCachePool.PageCache4: 0xcbac6000
[ 0.459471] PageCachePool.SpareCache: 0xcbaa6b80
[ 0.459483] PageCachePool.TmpPageCache: 0xcbac8000
[ 0.459494] PageCachePool.TmpPageCache1: 0xcbaca000
[ 0.459505] PHY_ChangeMode: sclk0 will be changed! 10 -> 30
[ 0.459516] PHY_ChangeMode: before check blank page, 0x101, 0x100, 0x10095, 0x21f
[ 0.460291] _check_scan_data, it is a free page(type 1), block 4
[ 0.460300] _check_scan_data, read error, block 4 !
[ 0.461049] _check_scan_data, it is a free page(type 1), block 5
[ 0.461059] _check_scan_data, read error, block 5 !
[ 0.461808] _check_scan_data, it is a free page(type 1), block 6
[ 0.461817] _check_scan_data, read error, block 6 !
[ 0.462566] _check_scan_data, it is a free page(type 1), block 7
[ 0.462575] _check_scan_data, read error, block 7 !
[ 0.462892] _check_scan_data, ok, block 8
[ 0.462900] _check_scan_data, valid data for ddr scan, block 8
[ 0.462908] PHY_ChangeMode: valid burned data!
[ 0.462917] PHY_ChangeMode: timing_change 1, sclk0_bak 10, sclk0 30!
[ 0.462936] _get_right_timing_para, set edo to 1 for sdr nand.
[ 0.462955] Physic_Info_Read start!!
[ 0.462962] Physic_Info_Get_Offset start!!
[ 0.464324] physic info start_block 4
[ 0.464636] physic info start_block 5
[ 0.464948] physic info start_block 6
[ 0.465258] physic info start_block 7
[ 0.465569] physic info start_block 8
[ 0.465711] Physic_Info_Get_One_Copy start!!
[ 0.466792] block 15 page 0
[ 0.466934] block 15 page 1
[ 0.467076] block 15 page 2
[ 0.467218] block 15 page 3
[ 0.467360] block 15 page 4
[ 0.467501] block 15 page 5
[ 0.467643] block 15 page 6
[ 0.467784] block 15 page 7
[ 0.467926] block 15 page 8
[ 0.468068] block 15 page 9
[ 0.468209] block 15 page 10
[ 0.468351] block 15 page 11
[ 0.468493] block 15 page 12
[ 0.468635] block 15 page 13
[ 0.468776] block 15 page 14
[ 0.468918] block 15 page 15
[ 0.469140] physic info copy is ok
[ 0.469148] NandGetPhyInfoFlag !!!!
[ 0.469156]
[ 0.469158]
[ 0.469164] [SCAN_DBG] ==============Nand Architecture Parameter==============
[ 0.469175] [SCAN_DBG] Nand Chip ID: 0x9510dcec 0xffffff56
[ 0.469184] [SCAN_DBG] Nand Channel Count: 0x1
[ 0.469192] [SCAN_DBG] Nand Chip Count: 0x1
[ 0.469199] [SCAN_DBG] Nand Chip Connect: 0x1
[ 0.469207] [SCAN_DBG] Nand Rb Connect Mode: 0x1
[ 0.469215] [SCAN_DBG] Sector Count Of Page: 0x4
[ 0.469222] [SCAN_DBG] Page Count Of Block: 0x40
[ 0.469230] [SCAN_DBG] Block Count Of Die: 0x1000
[ 0.469238] [SCAN_DBG] Plane Count Of Die: 0x2
[ 0.469246] [SCAN_DBG] Die Count Of Chip: 0x1
[ 0.469253] [SCAN_DBG] Bank Count Of Chip: 0x1
[ 0.469261] [SCAN_DBG] Optional Operation: 0x8c
[ 0.469269] [SCAN_DBG] Access Frequency: 0x1e
[ 0.469276] [SCAN_DBG] ECC Mode: 0x0
[ 0.469284] [SCAN_DBG] Read Retry Type: 0x0
[ 0.469292] [SCAN_DBG] DDR Type: 0x0
[ 0.469299] [SCAN_DBG] =======================================================
[ 0.469304]
[ 0.469311] [SCAN_DBG] ==============Optional Operaion Parameter==============
[ 0.469320] [SCAN_DBG] MultiPlaneReadCmd: 0x0, 0x30
[ 0.469329] [SCAN_DBG] MultiPlaneWriteCmd: 0x11, 0x81
[ 0.469338] [SCAN_DBG] MultiPlaneCopyReadCmd: 0x0, 0x0, 0x35
[ 0.469348] [SCAN_DBG] MultiPlaneCopyWriteCmd: 0x85, 0x11, 0x81
[ 0.469356] [SCAN_DBG] MultiPlaneStatusCmd: 0x70
[ 0.469364] [SCAN_DBG] InterBnk0StatusCmd: 0xf1
[ 0.469372] [SCAN_DBG] InterBnk1StatusCmd: 0xf2
[ 0.469380] [SCAN_DBG] BadBlockFlagPosition: 0x1
[ 0.469387] [SCAN_DBG] MultiPlaneBlockOffset: 0x1
[ 0.469395] [SCAN_DBG] =======================================================
[ 0.469404] kernel:nand info: 9510dcec ffffff56 8c 0 0
[ 0.469428] nand_para0, sorting_flag, nand type err! 0
[ 0.469437]
[ 0.469442] [FORMAT_DBG] ===========Logical Architecture Parameter===========
[ 0.469451] [FORMAT_DBG] Page Count of Logic Block: 0x40
[ 0.469460] [FORMAT_DBG] Sector Count of Logic Page: 0x8
[ 0.469468] [FORMAT_DBG] Block Count of Die: 0x800
[ 0.469476] [FORMAT_DBG] Die Count: 0x1
[ 0.469484] [FORMAT_DBG] ===================================================
[ 0.469497] NandHwInit: End Nand Hardware initializing ..... OK!
[ 0.469535] [ND]boot start
[ 0.469548] [ND]partition->size :932352
[ 0.469555] [ND]partition->cross_talk :0
[ 0.469563] [ND]partition->attribute :0
[ 0.469571] [ND]partition->start.Chip_NO :0
[ 0.469578] [ND]partition->start.Block_NO :23
[ 0.469586] [ND]partition->end.Chip_NO :0
[ 0.469593] [ND]partition->end.Block_NO :2047
[ 0.469601] [ND]partition->nand_disk[0].size :32768
[ 0.469610] [ND]partition->nand_disk[0].type :0
[ 0.469618] [ND]partition->nand_disk[1].size :4096
[ 0.469626] [ND]partition->nand_disk[1].type :0
[ 0.469634] [ND]partition->nand_disk[2].size :4096
[ 0.469642] [ND]partition->nand_disk[2].type :0
[ 0.469650] [ND]partition->nand_disk[3].size :16384
[ 0.469658] [ND]partition->nand_disk[3].type :0
[ 0.469666] [ND]partition->nand_disk[4].size :594944
[ 0.469674] [ND]partition->nand_disk[4].type :0
[ 0.469682] [ND]partition->nand_disk[5].size :204800
[ 0.469690] [ND]partition->nand_disk[5].type :0
[ 0.469698] [ND]partition->nand_disk[6].size :4096
[ 0.469706] [ND]partition->nand_disk[6].type :0
[ 0.469714] [ND]partition->nand_disk[7].size :71168
[ 0.469722] [ND]partition->nand_disk[7].type :0
[ 0.469730] [ND]partition->nand_disk[8].size :-1
[ 0.469738] [ND]partition->nand_disk[8].type :-1
[ 0.469746] [ND]partition->nand_disk[9].size :-1
[ 0.469754] [ND]partition->nand_disk[9].type :-1
[ 0.469762] [ND]partition->nand_disk[10].size :-1
[ 0.469770] [ND]partition->nand_disk[10].type :-1
[ 0.469778] [ND]partition->nand_disk[11].size :-1
[ 0.469786] [ND]partition->nand_disk[11].type :-1
[ 0.469794] [ND]partition->nand_disk[12].size :-1
[ 0.469802] [ND]partition->nand_disk[12].type :-1
[ 0.469810] [ND]partition->nand_disk[13].size :-1
[ 0.469818] [ND]partition->nand_disk[13].type :-1
[ 0.469826] [ND]partition->nand_disk[14].size :-1
[ 0.469834] [ND]partition->nand_disk[14].type :-1
[ 0.469842] [ND]partition->nand_disk[15].size :-1
[ 0.469850] [ND]partition->nand_disk[15].type :-1
[ 0.469858] [ND]partition->nand_disk[16].size :-1
[ 0.469866] [ND]partition->nand_disk[16].type :-1
[ 0.469874] [ND]partition->nand_disk[17].size :-1
[ 0.469882] [ND]partition->nand_disk[17].type :-1
[ 0.469890] [ND]partition->nand_disk[18].size :-1
[ 0.469898] [ND]partition->nand_disk[18].type :-1
[ 0.469905] [ND]partition->nand_disk[19].size :-1
[ 0.469913] [ND]partition->nand_disk[19].type :-1
[ 0.469921] [ND]partition->nand_disk[20].size :-1
[ 0.469929] [ND]partition->nand_disk[20].type :-1
[ 0.469937] [ND]partition->nand_disk[21].size :-1
[ 0.469945] [ND]partition->nand_disk[21].type :-1
[ 0.469953] [ND]partition->nand_disk[22].size :-1
[ 0.469961] [ND]partition->nand_disk[22].type :-1
[ 0.469969] [ND]partition->nand_disk[23].size :-1
[ 0.469977] [ND]partition->nand_disk[23].type :-1
[ 0.469989] [NE]partition_num: 0,size :0xe3a00,cross_talk 0
[ 0.469998] [NE]part mbr size: 0x8000 type: 0
[ 0.470029] [NE]part boot-res size: 0x1000 type: 0
[ 0.470038] [NE]part env size: 0x1000 type: 0
[ 0.470047] [NE]part boot size: 0x4000 type: 0
[ 0.470055] [NE]part rootfs size: 0x91400 type: 0
[ 0.470064] [NE]part savedata size: 0x32000 type: 0
[ 0.470072] [NE]part misc size: 0x1000 type: 0
[ 0.470081] [NE]part UDISK size: 0x11600 type: 0
[ 0.470192] [ND]factory bad block:0,1030 PartitionNO:0
[ 0.470301] [ND]factory bad block:0,2047 PartitionNO:0
[ 0.470315] [ND]build 1 phy_partition !
[ 0.470322] [ND]nand_info->type :0
[ 0.470329] [ND]nand_info->SectorNumsPerPage :8
[ 0.470337] [ND]nand_info->BytesUserData :16
[ 0.470344] [ND]nand_info->PageNumsPerBlk :64
[ 0.470351] [ND]nand_info->BlkPerChip :2048
[ 0.470377] [ND]nand_info->FirstBuild :0
[ 0.470385] [ND]nand_info->FullBitmap :1610612883
[ 0.470393] [ND]nand_info->bad_block_addr.Chip_NO :0
[ 0.470400] [ND]nand_info->bad_block_addr.Block_NO :0
[ 0.470408] [ND]nand_info->mbr_block_addr.Chip_NO :0
[ 0.470416] [ND]nand_info->mbr_block_addr.Block_NO :0
[ 0.470424] [ND]nand_info->no_used_block_addr.Chip_NO :0
[ 0.470432] [ND]nand_info->no_used_block_addr.Block_NO :23
[ 0.470439] [ND]nand_info->new_bad_block_addr.Chip_NO :0
[ 0.470447] [ND]nand_info->new_bad_block_addr.Block_NO :0
[ 0.470455] [ND]nand_info->new_bad_page_addr :65535
[ 0.470463] [ND]nand_info->partition_nums :1
[ 0.470470] [ND]sizeof partition:2384
[ 0.470477] [ND]nand_info->partition:0:
[ 0.470484] [ND]size:0xe3a00
[ 0.470495] [ND]cross_talk:0x0
[ 0.470502] [ND]attribute:0x0
[ 0.470508] [ND]start: chip:0 block:23
[ 0.470516] [ND]end : chip:0 block:2047
[ 0.470523] check_phyisc start.
[ 0.474828] uboot->sys_mode 0
[ 0.474837] uboot->use_lsb_page 0
[ 0.474843] uboot->copys 4
[ 0.474850] uboot->uboot_len 917504
[ 0.474856] uboot->total_len 950272
[ 0.474863] uboot->uboot_pages 448
[ 0.474870] uboot->total_pages 464
[ 0.474876] uboot->blocks_per_total 8
[ 0.474884] uboot->page_offset_for_nand_info 448
[ 0.474890] uboot->uboot_block
[ 0.474896] 8 16 24 32 0 0 0 0 0 0 0
[ 0.474927] 0 0 0 0 0 0 0 0 0 0
[ 0.474953] 0 0 0 0 0 0 0 0 0
[ 0.541588] nand_read_uboot_one ok 0
[ 0.608412] nand_read_uboot_one ok 1
[ 0.675117] nand_read_uboot_one ok 2
[ 0.741985] nand_read_uboot_one ok 3
[ 0.741995] check_phyisc end.
[ 0.742222] [NAND]nand_probe
[ 0.742257] [NAND]nand type err!
[ 0.742445] [ND]nand_partition0
[ 0.742559] [ND]nftl start:2025,204
[ 0.742790] [ND]first
[ 0.776686] [LCD]open, step 1 finish
[ 0.790029] [LCD]open, step 2 finish
[ 0.806426] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NULL!
[ 0.806440] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NULL!
[ 0.806473] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NULL!
[ 0.931249] _ReadCheckSpare: filled invalid page(0,732,0)...
[ 0.931720] _ReadCheckSpare: filled invalid page(0,734,0)...
[ 0.932186] _ReadCheckSpare: filled invalid page(0,736,0)...
[ 0.932429] _ReadCheckSpare: filled invalid page(0,737,0)...
[ 0.932894] _ReadCheckSpare: filled invalid page(0,739,0)...
[ 0.933360] _ReadCheckSpare: filled invalid page(0,741,0)...
[ 0.933604] _ReadCheckSpare: filled invalid page(0,742,0)...
[ 0.933847] _ReadCheckSpare: filled invalid page(0,743,0)...
[ 0.934089] _ReadCheckSpare: filled invalid page(0,744,0)...
[ 0.934331] _ReadCheckSpare: filled invalid page(0,745,0)...
[ 0.934573] _ReadCheckSpare: filled invalid page(0,746,0)...
[ 0.935038] _ReadCheckSpare: filled invalid page(0,748,0)...
[ 0.935280] _ReadCheckSpare: filled invalid page(0,749,0)...
[ 0.935522] _ReadCheckSpare: filled invalid page(0,750,0)...
[ 0.935764] _ReadCheckSpare: filled invalid page(0,751,0)...
[ 0.936006] _ReadCheckSpare: filled invalid page(0,752,0)...
[ 0.936248] _ReadCheckSpare: filled invalid page(0,753,0)...
[ 0.936490] _ReadCheckSpare: filled invalid page(0,754,0)...
[ 0.936956] _ReadCheckSpare: filled invalid page(0,756,0)...
[ 0.937423] _ReadCheckSpare: filled invalid page(0,758,0)...
[ 0.937665] _ReadCheckSpare: filled invalid page(0,759,0)...
[ 0.937908] _ReadCheckSpare: filled invalid page(0,760,0)...
[ 0.938150] _ReadCheckSpare: filled invalid page(0,761,0)...
[ 0.938392] _ReadCheckSpare: filled invalid page(0,762,0)...
[ 0.938634] _ReadCheckSpare: filled invalid page(0,763,0)...
[ 0.938876] _ReadCheckSpare: filled invalid page(0,764,0)...
[ 0.939118] _ReadCheckSpare: filled invalid page(0,765,0)...
[ 0.939360] _ReadCheckSpare: filled invalid page(0,766,0)...
[ 0.939625] _ReadCheckSpare: filled invalid page(0,767,0)...
[ 0.939869] _ReadCheckSpare: filled invalid page(0,768,0)...
[ 0.940126] _ReadCheckSpare: filled invalid page(0,769,0)...
[ 0.940370] _ReadCheckSpare: filled invalid page(0,770,0)...
[ 0.940613] _ReadCheckSpare: filled invalid page(0,771,0)...
[ 0.940855] _ReadCheckSpare: filled invalid page(0,772,0)...
[ 0.941097] _ReadCheckSpare: filled invalid page(0,773,0)...
[ 0.941339] _ReadCheckSpare: filled invalid page(0,774,0)...
[ 0.941580] _ReadCheckSpare: filled invalid page(0,775,0)...
[ 0.941822] _ReadCheckSpare: filled invalid page(0,776,0)...
[ 0.942064] _ReadCheckSpare: filled invalid page(0,777,0)...
[ 0.942306] _ReadCheckSpare: filled invalid page(0,778,0)...
[ 0.942549] _ReadCheckSpare: filled invalid page(0,779,0)...
[ 0.942790] _ReadCheckSpare: filled invalid page(0,780,0)...
[ 0.943032] _ReadCheckSpare: filled invalid page(0,781,0)...
[ 0.943274] _ReadCheckSpare: filled invalid page(0,782,0)...
[ 0.943517] _ReadCheckSpare: filled invalid page(0,783,0)...
[ 0.943761] _ReadCheckSpare: filled invalid page(0,784,0)...
[ 0.944003] _ReadCheckSpare: filled invalid page(0,785,0)...
[ 0.944245] _ReadCheckSpare: filled invalid page(0,786,0)...
[ 0.944487] _ReadCheckSpare: filled invalid page(0,787,0)...
[ 0.944729] _ReadCheckSpare: filled invalid page(0,788,0)...
[ 0.956541] _ReadCheckSpare: filled invalid page(0,841,0)...
[ 0.956793] _ReadCheckSpare: filled invalid page(0,842,0)...
[ 0.957037] _ReadCheckSpare: filled invalid page(0,843,0)...
[ 0.957503] _ReadCheckSpare: filled invalid page(0,845,0)...
[ 0.993359] [DISP] OSAL_Pwm_Enable,line:44: OSAL_Pwm_Enable, handle is NULL!
[ 0.993456] [LCD]open, step 3 finish
[ 0.998597] [ND]bad block: 1007
[ 1.224760] [ND]bad block: 2024
[ 1.224770] [ND]before second 2023 1821.
[ 1.572240] [NE]smart->version:aaaaaa01;
[ 1.572253] [NE]smart->total_recv_read_sectors:78193;
[ 1.572261] [NE]smart->total_recv_write_sectors:631826;
[ 1.572269] [NE]smart->total_real_read_pages:10026;
[ 1.572277] [NE]smart->total_real_write_pages:80408;
[ 1.572285] [NE]smart->total_recv_discard_sectors:275968;
[ 1.572293] [NE]smart->total_real_discard_sectors:275968;
[ 1.572301] [NE]smart->total_recv_read_claim_pages:0;
[ 1.572309] [NE]smart->total_gc_times:0;
[ 1.572316] [NE]smart->total_gc_pages:0;
[ 1.572322] [NE]smart->total_wl_times:0;
[ 1.572330] [NE]smart->total_real_read_error_pages:0;
[ 1.572337] [NE]smart->total_real_write_error_pages:0;
[ 1.572345] [NE]smart->total_normal_power_cycles:9;
[ 1.572353] [NE]smart->total_unusual_power_cycles:0;
[ 1.572361] [NE]smart->max_block_erase_times:0;
[ 1.572368] [NE]smart->min_block_erase_times:0;
[ 1.572375] [NE]smart->max_block_used_counter:0;
[ 1.572383] [NE]smart->min_block_used_counter:0;
[ 1.572391] [NE]smart->read_reclaim_utc:0;
[ 1.572398] [NE]smart->cross_talk_times:0;
[ 1.614123] [NE]recover_phy_page_mapping no used page 27!!
[ 1.614134] [ND]recover 708 27
[ 1.614147] [ND] nand3.5 version:0001 date:Oct 5 2020 09:33:28
[ 1.614156] [ND]zone->nand_chip->blk_per_chip: 2025
[ 1.614164] [ND]zone->nand_chip->bytes_per_page: 4096
[ 1.614172] [ND]zone->nand_chip->pages_per_blk: 64
[ 1.614180] [ND]zone->nand_chip->max_erase_times: 3000
[ 1.614188] [ND]zone->nand_chip->support_read_reclaim: 0
[ 1.614196] [ND]zone->test: 0
[ 1.614202] [ND]zone->zone_no: 0
[ 1.614209] [ND]zone->zone_attr: 0
[ 1.614215] [ND]zone->blocks: 2023
[ 1.614222] [ND]zone->bad_block: 2
[ 1.614229] [ND]zone->logic_cap_in_sects: 932352
[ 1.614237] [ND]zone->backup_cap_in_sects: 103424
[ 1.614244] [ND]zone->free_block_num: 763
[ 1.614252] [ND]zone->gc_strategy.start_gc_free_blocks: 40
[ 1.614260] [ND]zone->gc_strategy.stop_gc_free_blocks: 134
[ 1.614268] [ND]zone->gc_strategy.gc_page: 0
[ 1.614276] [ND]zone->gc_strategy.process: 1
[ 1.614283] [ND]zone->prio_gc.prio_type : 0
[ 1.614290] [ND]zone->zone_start_phy_block->phy_block.Block_NO: 0
[ 1.614299] [ND]zone->zone_end_phy_block->phy_block.Block_NO: 2023
[ 1.614308] [ND]zone->zone_phy_page_map_for_gc: cbad9800
[ 1.614316] [ND]zone->current_block.user_info: cbabf000
[ 1.614325] [ND]zone->current_block.block_info: cb006390
[ 1.614333] [ND]zone->current_block.block_info->phy_block.Block_NO: 708
[ 1.614342] [ND]zone->current_block.page_used: 27
[ 1.614349] [ND]zone->current_block.block_info->block_used_count: 1260
[ 1.614358] [ND]zone->read_reclaim_complete: 0
[ 1.614366] [ND]zone->temp_page_buf: cb9b1000
[ 1.614373] [ND]zone->max_erase_num: 1
[ 1.614380] [ND]zone->cache.cache_totals: 0
[ 1.614388] [ND]zone->cfg->nftl_dont_use_cache: 0
[ 1.614395] [ND]zone->cfg->nftl_use_cache_sort: 1
[ 1.614403] [ND]zone->cfg->nftl_support_gc_read_reclaim: 1
[ 1.614411] [ND]zone->cfg->nftl_support_wear_leveling: 1
[ 1.614419] [ND]zone->cfg->nftl_need_erase: 0
[ 1.614427] [ND]zone->cfg->nftl_min_free_block_num: 19
[ 1.614435] [ND]zone->cfg->nftl_gc_threshold_free_block_num: 8
[ 1.614443] [ND]zone->cfg->nftl_min_free_block: 4
[ 1.614451] [ND]zone->cfg->nftl_gc_threshold_ratio_numerator: 2
[ 1.614459] [ND]zone->cfg->nftl_gc_threshold_ratio_denominator: 3
[ 1.614468] [ND]zone->cfg->nftl_max_cache_num: 20
[ 1.614475] [ND]zone->cfg->nftl_max_cache_write_num: 1
[ 1.614483] [ND]zone->cfg->nftl_cross_talk: 0
[ 1.614491] [ND]zone->cfg->nftl_read_claim_interval: 1296000
[ 1.614499] [NE]smart->version:aaaaaa01;
[ 1.614506] [NE]smart->total_recv_read_sectors:78193;
[ 1.614514] [NE]smart->total_recv_write_sectors:631826;
[ 1.614522] [NE]smart->total_real_read_pages:10118;
[ 1.614530] [NE]smart->total_real_write_pages:80408;
[ 1.614537] [NE]smart->total_recv_discard_sectors:275968;
[ 1.614545] [NE]smart->total_real_discard_sectors:275968;
[ 1.614553] [NE]smart->total_recv_read_claim_pages:0;
[ 1.614561] [NE]smart->total_gc_times:0;
[ 1.614568] [NE]smart->total_gc_pages:0;
[ 1.614575] [NE]smart->total_wl_times:0;
[ 1.614582] [NE]smart->total_real_read_error_pages:0;
[ 1.614589] [NE]smart->total_real_write_error_pages:0;
[ 1.614597] [NE]smart->total_normal_power_cycles:9;
[ 1.614604] [NE]smart->total_unusual_power_cycles:0;
[ 1.614612] [NE]smart->max_block_erase_times:0;
[ 1.614619] [NE]smart->min_block_erase_times:0;
[ 1.614626] [NE]smart->max_block_used_counter:0;
[ 1.614634] [NE]smart->min_block_used_counter:0;
[ 1.614642] [NE]smart->read_reclaim_utc:0;
[ 1.614649] [NE]smart->cross_talk_times:0;
[ 1.614655] [ND]nftl ok!
[ 1.614664] [ND] panic block 707!
[ 1.614670] [ND] panic block 706!
[ 1.614677] [ND] panic block 705!
[ 1.614768] [ND]max_erase_times = 20000
[ 1.614903] [NAND]nand_dev add mbr
[ 1.614913] [NAND]nand_dev add boot-res
[ 1.615855] nanda:
[ 1.616061] [NAND]nand_dev add env
[ 1.616737] nandb: unknown partition table
[ 1.616912] [NAND]nand_dev add boot
[ 1.617498] nandc:
[ 1.617658] [NAND]nand_dev add rootfs
[ 1.618221] nandd: unknown partition table
[ 1.618384] [NAND]nand_dev add savedata
[ 1.618949] nande: unknown partition table
[ 1.619113] [NAND]nand_dev add misc
[ 1.619658] nandf: unknown partition table
[ 1.619828] [NAND]nand_dev add UDISK
[ 1.620402] nandg: unknown partition table
[ 1.620659] [NAND]nand init end
[ 1.620765] get ma8601 reset gpio OK
[ 1.746733] ma8601 init finish
[ 1.746922] sunxi_spi_chan_cfg()1368 - [spi-0] has no spi_regulator.
[ 1.746939] sunxi_spi_chan_cfg()1368 - [spi-1] has no spi_regulator.
[ 1.746970] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.747028] [sunxi_hci_sunxi]: [sunxi-ehci1]: probe, pdev->name: sunxi-ehci, pdev->id: 1, sunxi_ehci: 0xc086639c
[ 1.747045] [sunxi_hci_sunxi]: [sunxi-ehci1]: open clock, is_open: 0
[ 1.767072] [sunxi_hci_sunxi]: [sunxi-ehci1]: Set USB Power ON
[ 1.767087] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.767118] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
[ 1.767799] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
[ 1.776700] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
[ 1.776715] ehci_irq: highspeed device connect
[ 1.777334] usb usb1: hdev->level=0
[ 1.777344] hub 1-0:1.0: USB hub found
[ 1.777363] hub 1-0:1.0: 1 port detected
[ 1.777745] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.777805] [sunxi_hci_sunxi]: [sunxi-ohci1]: probe, pdev->name: sunxi-ohci, pdev->id: 1, sunxi_ohci: 0xc08664a0
[ 1.777825] [sunxi_hci_sunxi]: [sunxi-ohci1]: open clock, is_open: 0
[ 1.797848] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 1.797878] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
[ 1.797913] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
[ 1.854571] usb usb2: hdev->level=0
[ 1.854581] hub 2-0:1.0: USB hub found
[ 1.854598] hub 2-0:1.0: 1 port detected
[ 1.854984] get serial_unique failed
[ 1.855179] [sw_udc]: [sunxi_usb_udc]: binding gadget driver 'android_usb'
[ 1.855195] [sw_udc]: alloc request: ep(0xc080f1c8, ep0, 64), req(0xcb0611c0)
[ 1.855214] sunxi_udc_set_selfpowered_2302: usb device is not active
[ 1.855225] [sw_udc]: sunxi_udc_pullup, is_on = 0
[ 1.855236] sunxi_udc_set_pullup_2319: usb device is not active
[ 1.855335] file system registered
[ 1.856374] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 1.856387] android_usb gadget: Number of LUNs=3
[ 1.856398] lun0: LUN: removable file: (no medium)
[ 1.856408] lun1: LUN: removable file: (no medium)
[ 1.856418] lun2: LUN: removable file: (no medium)
[ 1.856735] sunxi_udc_set_selfpowered_2302: usb device is not active
[ 1.856753] android_usb gadget: android_usb ready
[ 1.856777] [sw_hcd0]: usb host driver initialize........
[ 1.856854] [sw_hcd0]: open_usb_clock
[ 1.857129] usb_regulator id vbus io is not exist
[ 1.857139] [sunxi_hcd0]: host_init_state = 0
[ 1.857148] [sw_hcd0]: platform is usb host
[ 1.857200] [sw_hcd0]: sunxi_hcd_init_controller: sunxi_hcd_host0: USB Host mode controller at f1c19000 using PIO, IRQ 103
[ 1.857223] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
[ 1.857236] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
[ 1.857755] usb usb3: hdev->level=0
[ 1.857765] hub 3-0:1.0: USB hub found
[ 1.857789] hub 3-0:1.0: 1 port detected
[ 1.858098] [sw_hcd0]: sunxi_usb_host0_disable start
[ 1.858110] [sw_hcd0]: sunxi_hcd_wait_for_disconnect cnt=0
[ 1.858123] [sunxi_hcd_host0]: Set USB Power OFF
[ 1.858228] -------sunxi_hcd0_soft_disconnect---------
[ 1.858238] wrn: hcd is not enable, need not stop hcd
[ 1.858247] [sunxi_hcd_host0]: Set USB Power OFF
[ 1.858364] [sw_hcd0]: close_usb_clock
[ 1.858391] [sw_hcd0]: sunxi_usb_host0_disable end
[ 1.859038] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input1
[ 1.859536] input: sunxi-keyboard as /devices/virtual/input/input2
[ 1.859803] [RTC] WARNING: Rtc time will be wrong!!
[ 1.860078] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
[ 1.860123] i2c /dev entries driver
[ 1.860529] sunxi cedar version 0.1
[ 1.860581] [cedar]: install start!!!
[ 1.860756] [cedar]: install end!!!
[ 1.863509] axp22_dcdc1: Failed to create debugfs directory
[ 1.864968] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 1.865314] autohotplug_init init ok
[ 1.865349] sunxi_cpufreq_initcall: clocks pll=1008000000,cpu=1008000000,axi=336000000
[ 1.865365] cur: pll=1008000000, cpudiv=1, axidiv=3
[ 1.865389] axp22_dcdc3: Failed to create debugfs directory
[ 1.865413] sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 1200MHz, min freq: 120MHz
[ 1.865452] -------------------CPU V-F Table--------------------
[ 1.865462] frequency = 1536000KHz voltage = 1500mv
[ 1.865471] frequency = 1344000KHz voltage = 1460mv
[ 1.865479] frequency = 1200000KHz voltage = 1320mv
[ 1.865488] frequency = 1008000KHz voltage = 1200mv
[ 1.865496] frequency = 816000KHz voltage = 1100mv
[ 1.865505] frequency = 648000KHz voltage = 1040mv
[ 1.865513] frequency = 0KHz voltage = 1040mv
[ 1.865521] frequency = 0KHz voltage = 1040mv
[ 1.865529] -----------------------------------------------------
[ 1.867871] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.120 2016-08-3 10:59) Compiled in Oct 5 2020 at 09:34:20
[ 1.867895] [mmc]: MMC host used card: 0x0, boot card: 0x0, io_card 0
[ 1.867974] [led]:sunxi_led_init begin!
[ 1.867989] led1 gpio number is 39
[ 1.867997] led1_trigger gpio number is none
[ 1.868006] led2 gpio number is 33
[ 1.868013] led2_trigger gpio number is none
[ 1.868249] Registered led device: led1
[ 1.868323] Registered led device: led2
[ 1.868940] usbcore: registered new interface driver usbhid
[ 1.868948] usbhid: USB HID core driver
[ 1.869393] ashmem: initialized
[ 1.869492] logger: created 256K log 'log_main'
[ 1.869587] logger: created 256K log 'log_events'
[ 1.869710] logger: created 256K log 'log_radio'
[ 1.869811] logger: created 256K log 'log_system'
[ 1.869991] Linux telephony interface: v1.00
[ 1.870414] usbcore: registered new interface driver snd-usb-audio
[ 1.874335] asoc: sndi2s0 <-> i2s0 mapping ok
[ 1.875615] [audiocodec] : aif3 not used!
[ 1.876865] asoc: sndcodec <-> sunxi-codec mapping ok
[ 1.877848] input: headset as /devices/virtual/input/input3
[ 1.878230] [I2S1]sunxi-i2s1 cannot find any using configuration for controllers, return directly!
[ 1.878424] [I2S]sndi2s1 cannot find any using configuration for controllers, return directly!
[ 1.878435] I2S1 driver not init,just return.
[ 1.878582] u32 classifier
[ 1.878588] Actions configured
[ 1.878597] Netfilter messages via NETLINK v0.30.
[ 1.878672] nf_conntrack version 0.5.0 (3899 buckets, 15596 max)
[ 1.879026] ctnetlink v0.93: registering with nfnetlink.
[ 1.879081] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 1.879090] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 1.879274] xt_time: kernel timezone is -0000
[ 1.879423] IPv4 over IPv4 tunneling driver
[ 1.879844] gre: GRE over IPv4 demultiplexor driver
[ 1.879854] ip_gre: GRE over IPv4 tunneling driver
[ 1.880504] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.880671] arp_tables: (C) 2002 David S. Miller
[ 1.880725] TCP: cubic registered
[ 1.880732] Initializing XFRM netlink socket
[ 1.881003] NET: Registered protocol family 10
[ 1.882004] Mobile IPv6
[ 1.882037] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.882194] IPv6 over IPv4 tunneling driver
[ 1.883109] NET: Registered protocol family 17
[ 1.883137] NET: Registered protocol family 15
[ 1.883150] L2TP core driver, V2.0
[ 1.883156] L2TP IP encapsulation support (L2TPv3)
[ 1.883216] L2TP netlink interface
[ 1.883243] L2TP ethernet pseudowire support (L2TPv3)
[ 1.883733] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 1.883753] ThumbEE CPU extension supported.
[ 1.883773] Registering SWP/SWPB emulation handler
[ 1.884389] axp22_dc5ldo: incomplete constraints, leaving on
[ 1.884475] axp22_eldo2: incomplete constraints, leaving on
[ 1.884523] axp22_eldo1: incomplete constraints, leaving on
[ 1.884684] axp22_dldo1: incomplete constraints, leaving on
[ 1.884731] axp22_aldo3: incomplete constraints, leaving on
[ 1.884778] axp22_aldo2: incomplete constraints, leaving on
[ 1.884826] axp22_rtc: incomplete constraints, leaving on
[ 1.884874] axp22_dcdc5: incomplete constraints, leaving on
[ 1.884959] axp22_dcdc3: incomplete constraints, leaving on
[ 1.885006] axp22_dcdc2: incomplete constraints, leaving on
[ 1.885133] otg_wakelock_init: No USB transceiver found
[ 1.885154] sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
[ 1.885193] ths_fetch_sysconfig_para: type err device_used = 1.
[ 1.885380] input: sunxi-ths as /devices/virtual/input/input4
[ 1.885651] suxi_ths: Kernel Thermal management registered
[ 1.885670] fetch C0_LV_count from sysconfig failed
[ 1.886030] sunxi_ths_bind : thermal-budget-0
[ 1.886041] ths_zone trip = 75, adjust lower = 0, upper = 1
[ 1.886068] ths_zone trip = 90, adjust lower = 1, upper = 3
[ 1.886085] CPU Budget:Register notifier
[ 1.886094] CPU Budget:register Success
[ 1.886104] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
[ 1.889378] ALSA device list:
[ 1.889391] #0: sndi2s0
[ 1.889398] #1: audiocodec
[ 1.894449] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: (null)
[ 1.894508] VFS: Mounted root (ext4 filesystem) on device 93:24.
[ 1.895603] devtmpfs: mounted
[ 1.895796] Freeing init memory: 196K
[ 2.060986] [ND]flush cache 1 0!
[ 2.064414] [ND]flush cache 1 0!
[ 2.066689] EXT4-fs (nandd): re-mounted. Opts: data=ordered
[ 2.083403] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
[ 2.102072] [ND]flush cache 1 0!
[ 2.176335] EXT4-fs (nande): recovery complete
[ 2.176359] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: (null)
[ 2.208453] usb 1-1: hdev->level=1
[ 2.208464] hub 1-1:1.0: USB hub found
[ 2.208582] hub 1-1:1.0: 4 ports detected
[ 2.299194] EXT4-fs (nandg): recovery complete
[ 2.299217] EXT4-fs (nandg): mounted filesystem with ordered data mode. Opts: (null)
[ 2.442020] udevd[107]: starting version 3.2.7
[ 2.454503] udevd[107]: specified group 'kvm' unknown
[ 2.462775] udevd[108]: starting eudev-3.2.7
[ 2.533407] ====codec_init_events===
[ 2.780582] vmalloc: allocation failure: 0 bytes
[ 2.780601] modprobe: page allocation failure: order:0, mode:0xd0
[ 2.782938] Mali<2>: Inserting Mali v401 device driver.
[ 2.782955] Mali<2>: Compiled: Oct 5 2020, time: 09:35:08.
[ 2.782965] Mali<2>: Driver revision:
[ 2.783185] Get mali parameter successfully
[ 2.783220] Init Mali gpu successfully
[ 2.783228] Mali<2>: mali_module_init() registering driver
[ 2.783396] Mali<2>: mali_probe(): Called for platform device mali-utgard
[ 2.783461] Mali<2>: Using device defined memory settings (dedicated: 0x00000000@0x00000000, shared: 0x0F3E5000)
[ 2.783482] Mali<2>: Using device defined frame buffer settings (0x00708000@0x4C400000)
[ 2.783495] Mali<2>: Memory Validator installed for Mali physical address base=0x4C400000, size=0x00708000
[ 2.783519] Mali<2>: Using default PMU domain config: (2) gr1_pp_cores, (0) gr2_pp_cores, (1) l2_count.
[ 2.783533] Mali<2>: Mali PMU: Creating Mali PMU core
[ 2.783542] Mali<2>: Mali PMU: mask 0xf, pp_core 2, l2_core 1
[ 2.783582] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
[ 2.783593] Mali<2>: Mali PP: Base address of PP core: 0x1c48000
[ 2.783674] Mali<2>: Found Mali GPU Mali-400 MP r1p1
[ 2.783688] Mali<2>: Mali PM domain: Creating Mali PM domain (mask=0x00000001)
[ 2.783700] Mali<2>: Mali PM domain: Creating Mali PM domain (mask=0x00000004)
[ 2.783711] Mali<2>: Mali PM domain: Creating Mali PM domain (mask=0x00000008)
[ 2.783722] Mali<2>: Mali PM domain: Creating Mali PM domain (mask=0x00000002)
[ 2.783798] Mali<2>: Mali L2 cache: Created Mali_L2: 64K, 4-way, 64byte cache line, 64bit external bus
[ 2.783825] Mali<2>: Mali MMU: Creating Mali MMU: Mali_GP_MMU
[ 2.783857] Mali<2>: Mali GP: Creating Mali GP core: Mali_GP
[ 2.783890] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP0_MMU
[ 2.783913] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP0
[ 2.783922] Mali<2>: Mali PP: Base address of PP core: 0x1c48000
[ 2.783947] Mali<2>: Mali MMU: Creating Mali MMU: Mali_PP1_MMU
[ 2.783969] Mali<2>: Mali PP: Creating Mali PP core: Mali_PP1
[ 2.783978] Mali<2>: Mali PP: Base address of PP core: 0x1c4a000
[ 2.784002] Mali<2>: 2+0 PP cores initialized
[ 2.784018] Mali<2>: Mali GPU Utilization: Platform has it's own policy
[ 2.784027] Mali<2>: Mali GPU Utilization: Utilization handler installed with interval 500
[ 2.784702] Mali<2>: mali_probe(): Successfully initialized driver for platform device mali-utgard
[ 2.784823] Mali: Mali device driver loaded
[ 3.197797] set vol to 40
[ 3.534630] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NULL!
[ 3.716025] Mali<2>: Session started
[ 3.734128] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NULL!
[ 3.734147] [DISP] OSAL_Pwm_free,line:27: OSAL_Pwm_free, handle is NULL!
[ 3.734515] [DISP] OSAL_CCMU_SetMclkFreq,line:481: clk 26 freq is 0, wrn
[ 3.743405] lcd_clk_config222 ======lcd ddddclk = 28485600
[ 3.743418] lcd_clk_config 111 ======lcd clk = 341827200, pll_clk = 341827200
[ 3.743427] lcd_clk_config 222 ======lcd clk = 341827200, pll_clk = 341827200
[ 3.743791] LCD_set_panel_funs: ====
[ 3.743810] disp_lcd_get_driver_name, h2009
[ 3.743817] gdisp.init_para.start_process
[ 3.743841] disp_lcd_get_driver_name, h2009
[ 3.743847] gdisp.init_para.start_process
[ 3.743863] start_work================111
[ 3.743870] extern hdmi type...
[ 3.743899] disp_lcd_get_driver_name, h2009
[ 3.743906] gdisp.init_para.start_process
[ 3.743918] start_work================111
[ 3.743924] extern hdmi type...
[ 3.743953] disp_lcd_get_driver_name, h2009
[ 3.743960] gdisp.init_para.start_process
[ 3.743974] start_work================111
[ 3.743980] extern hdmi type...
[ 3.744004] disp_lcd_get_driver_name, h2009
[ 3.744010] gdisp.init_para.start_process
[ 3.744022] start_work================111
[ 3.744028] extern hdmi type...
[ 3.744048] disp_lcd_get_driver_name, h2009
[ 3.744055] gdisp.init_para.start_process
[ 3.744065] start_work================111
[ 3.744071] extern hdmi type...
[ 3.744091] disp_lcd_get_driver_name, h2009
[ 3.744098] gdisp.init_para.start_process
[ 3.744109] start_work================111
[ 3.744115] extern hdmi type...
[ 3.744141] disp_lcd_get_driver_name, h2009
[ 3.744149] gdisp.init_para.start_process
[ 3.744160] start_work================111
[ 3.744166] extern hdmi type...
[ 3.744189] disp_lcd_get_driver_name, h2009
[ 3.744196] gdisp.init_para.start_process
[ 3.744207] start_work================111
[ 3.744213] extern hdmi type...
[ 3.744318] [LCD]close, step 0 finish
[ 3.744330] start_work================111
[ 3.744336] extern hdmi type...
[ 4.006697] [LCD]close, step 1 finish
[ 4.100016] [LCD]close, step 2 finish
[ 4.126703] drv_lcd_enable: ====
[ 4.126815] lcd_clk_config222 ======lcd ddddclk = 28485600
[ 4.126825] lcd_clk_config 111 ======lcd clk = 341827200, pll_clk = 341827200
[ 4.126835] lcd_clk_config 222 ======lcd clk = 341827200, pll_clk = 341827200
[ 4.127454] axp22_dcdc1: Failed to create debugfs directory
[ 4.127472] axp22_aldo1: Failed to create debugfs directory
[ 4.127481] [LCD]open, step 0 finish
[ 4.453366] [LCD]open, step 1 finish
[ 4.466710] [LCD]open, step 2 finish
[ 4.670131] [LCD]open, step 3 finish
[ 4.684998] set vol to 55
[ 10.349467] [ND]flush cache 1 0!
[ 37.960899] sw_uart_set_termios()763 - uart0 write LCR(pre-dlab) failed, lcr 93 reg 13
[ 55.337142] [ND]flush cache 1 0!
[ 55.337983] [ND]flush cache 1 0!
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment