Skip to content

Instantly share code, notes, and snippets.

@bakueikozo

bakueikozo/DATAEAST Classics u-boot (shell interrupt)

Created May 16, 2020 05:41
Show Gist options
  • Save bakueikozo/eba88495e48c95b57a141727c742b380 to your computer and use it in GitHub Desktop.
Save bakueikozo/eba88495e48c95b57a141727c742b380 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
DATAEAST Classics u-boot (shell interrupt)
HELLO! BOOT0 is starting!
boot0 version : 3.1.0
[DRAM]ver 0.9 clk = 432
dram ok
dram size =512
card boot number = 2
card no is 2
sdcard 2 line count 0
[mmc]: mmc driver ver 2014-02-28 16:35
[mmc]: ************Try SD card 2************
[mmc]: mmc 2 cmd 8 timeout, err 0x00000100
[mmc]: mmc 2 cmd 8 err 0x00000100
[mmc]: mmc 2 send if cond failed
[mmc]: mmc 2 cmd 55 timeout, err 0x00000100
[mmc]: mmc 2 cmd 55 err 0x00000100
[mmc]: mmc 2 send app cmd failed
[mmc]: ************Try MMC card 2************
[mmc]: MMC ver 5.0
[mmc]: SD/MMC Card: 4bit, capacity: 3728MB
[mmc]: vendor: Man 0x0090014a Snr 0x0321da24
[mmc]: product: H4G1d
[mmc]: revision: 0.4
[mmc]: ************SD/MMC 2 init OK!!!************
sdcard 2 init ok
The size of uboot is 0x000b4000.
sum=0xdf5f972b
src_sum=0xdf5f972b
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
[ 0.303]
U-Boot 2011.09-rc1-00002-gd74fabe-dirty (May 25 2017 - 15:32:48) Allwinner Technology
[ 0.312]version: 1.1.0
[ 0.326]pmbus: ready
[ 0.329]PMU: AXP221
[ 0.331]PMU: AXP22x found
[ 0.334]PMU: bat ratio = 100
[ 0.337]PMU: dcdc3 1260
[ 0.339]PMU: pll1 1008 Mhz
set power on vol to default
dcdc1_vol = 0
dcdc2_vol = 0
dcdc3_vol = 0
dcdc4_vol = 0
dcdc5_vol = 0
aldo2_vol = 0
aldo3_vol = 0
find power_sply to end
no battery, limit to dc
fel key old mode
run key detect
no key found
0x73
dram_para_set start
dram_para_set end
[ 0.882]DRAM: 512 MiB
relocation Offset is: 14b10000
DRV_DISP_Init: opened
[ 1.058]fetch script data boot_disp.output_type fail
[ 1.064]fetch script data boot_disp.output_mode fail
[ 1.069]fetch script data boot_disp.auto_hpd fail
[ 1.074]lcd0_para.lcd_used=1
workmode = 0
MMC: 2
[ 1.089][mmc]: mmc driver ver 2014-2-28 16:33:00
[ 1.094][mmc]: get sdc_odly_25M fail,use default dly 0
[ 1.099][mmc]: get sdc_sdly_25M fail,use default dly 5
[ 1.105][mmc]: get sdc_odly_50M fail,use default dly 3
[ 1.110][mmc]: get sdc_sdly_50M fail,use default dly 5
[ 1.115][mmc]: SUNXI SD/MMC: 2
[ 1.129][mmc]: ************Try SD card 2************
[ 1.134][mmc]: mmc 2 cmd 8 timeout, err 100
[ 1.141][mmc]: mmc 2 mmc cmd 8 err 0x00000100
[ 1.145][mmc]: mmc send if cond failed
[ 1.149][mmc]: mmc 2 cmd 55 timeout, err 100
[ 1.155][mmc]: mmc 2 mmc cmd 55 err 0x00000100
[ 1.159][mmc]: send app cmd failed
[ 1.162][mmc]: ************Try MMC card 2************
[ 1.209][mmc]: MID 000090 PSN 21da24ae
[ 1.212][mmc]: PNM H4G1d -- 0x48-34-47-31-64-04
[ 1.217][mmc]: PRV 0.3
[ 1.220][mmc]: MDT m-2 y-2016
[ 1.223][mmc]: MMC ver 4.5
[ 1.226][mmc]: ---------------mmc->clock 52000000-----------
[ 1.231][mmc]: ---------------mmc->bus_width 4--------------
[ 1.237][mmc]: SD/MMC Card: 4bit, capacity: 3728MB
[ 1.242][mmc]: boot0 capacity: 4000KB,boot1 capacity: 4000KB
[ 1.248][mmc]: ************SD/MMC 2 init OK!!!************
[ 1.255]sunxi flash init ok
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:10-
-name- -start- -size-
boot-resource: 1000000 2000000
env : 3000000 1000000
boot : 4000000 1000000
system : 5000000 30000000
data : 35000000 40000000
misc : 75000000 1000000
recovery : 76000000 2000000
cache : 78000000 20000000
databk : 98000000 8000000
UDISK : a0000000 0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_mmc
key 0
recovery key high 8, low 2
cant find fstbt value
misc partition found
misc_message->command = 0
to be run cmd=run setargs_mmc boot_normal
cant open script.bin, maybe it is not exist
WORK_MODE_BOOT
board_status_probe
[ 1.350]power trigger
bat_exist=0
[ 1.354]no battery exist
sunxi_bmp_display
[ 1.376]Hit any key to stop autoboot: 0
sunxi#version
U-Boot 2011.09-rc1-00002-gd74fabe-dirty (May 25 2017 - 15:32:48) Allwinner Technology
arm-linux-gnueabi-gcc (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) 4.6.3 20120201 (prerelease)
GNU ld (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) 2.22
sunxi#printenv
boot_fastboot=fastboot
boot_normal=sunxi_flash read 40007800 boot;boota 40007800
boot_recovery=sunxi_flash read 40007800 recovery;boota 40007800
bootcmd=run setargs_mmc boot_normal
bootdelay=3
console=ttyS0,115200
fastboot_key_value_max=0x8
fastboot_key_value_min=0x2
filesize=5FA36
init=/init
loglevel=5
mmc_root=/dev/mmcblk0p7
nand_root=/dev/system
partitions=boot-resource@mmcblk0p2:env@mmcblk0p5:boot@mmcblk0p6:system@mmcblk0p7:data@mmcblk0p8:misc@mmcblk0p9:recovery@mmcblk0p10:cache@mmcblk0p11:databk@mmcblk0p12:UDISK@mmcblk0p1
recovery_key_value_max=0x13
recovery_key_value_min=0x10
setargs_mmc=setenv bootargs console=${console} root=${mmc_root} init=${init} loglevel=${loglevel} partitions=${partitions}
setargs_nand=setenv bootargs console=${console} root=${nand_root} init=${init} loglevel=${loglevel} partitions=${partitions}
stderr=serial
stdin=serial
stdout=serial
Environment size: 921/131068 bytes
sunxi#
Raw
DATAEAST Classics u-boot and kernel log(normal boot)
HELLO! BOOT0 is starting!
boot0 version : 3.1.0
[DRAM]ver 0.9 clk = 432
dram ok
dram size =512
card boot number = 2
card no is 2
sdcard 2 line count 0
[mmc]: mmc driver ver 2014-02-28 16:35
[mmc]: ************Try SD card 2************
[mmc]: mmc 2 cmd 8 timeout, err 0x00000100
[mmc]: mmc 2 cmd 8 err 0x00000100
[mmc]: mmc 2 send if cond failed
[mmc]: mmc 2 cmd 55 timeout, err 0x00000100
[mmc]: mmc 2 cmd 55 err 0x00000100
[mmc]: mmc 2 send app cmd failed
[mmc]: ************Try MMC card 2************
[mmc]: MMC ver 5.0
[mmc]: SD/MMC Card: 4bit, capacity: 3728MB
[mmc]: vendor: Man 0x0090014a Snr 0x0321da24
[mmc]: product: H4G1d
[mmc]: revision: 0.4
[mmc]: ************SD/MMC 2 init OK!!!************
sdcard 2 init ok
The size of uboot is 0x000b4000.
sum=0xdf5f972b
src_sum=0xdf5f972b
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
[ 0.303]
U-Boot 2011.09-rc1-00002-gd74fabe-dirty (May 25 2017 - 15:32:48) Allwinner Technology
[ 0.312]version: 1.1.0
[ 0.326]pmbus: ready
[ 0.329]PMU: AXP221
[ 0.331]PMU: AXP22x found
[ 0.334]PMU: bat ratio = 100
[ 0.337]PMU: dcdc3 1260
[ 0.340]PMU: pll1 1008 Mhz
set power on vol to default
dcdc1_vol = 0
dcdc2_vol = 0
dcdc3_vol = 0
dcdc4_vol = 0
dcdc5_vol = 0
aldo2_vol = 0
aldo3_vol = 0
find power_sply to end
no battery, limit to dc
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[ 0.883]DRAM: 512 MiB
relocation Offset is: 14b10000
DRV_DISP_Init: opened
[ 1.059]fetch script data boot_disp.output_type fail
[ 1.065]fetch script data boot_disp.output_mode fail
[ 1.070]fetch script data boot_disp.auto_hpd fail
[ 1.075]lcd0_para.lcd_used=1
workmode = 0
MMC: 2
[ 1.090][mmc]: mmc driver ver 2014-2-28 16:33:00
[ 1.095][mmc]: get sdc_odly_25M fail,use default dly 0
[ 1.100][mmc]: get sdc_sdly_25M fail,use default dly 5
[ 1.106][mmc]: get sdc_odly_50M fail,use default dly 3
[ 1.111][mmc]: get sdc_sdly_50M fail,use default dly 5
[ 1.116][mmc]: SUNXI SD/MMC: 2
[ 1.130][mmc]: ************Try SD card 2************
[ 1.135][mmc]: mmc 2 cmd 8 timeout, err 100
[ 1.142][mmc]: mmc 2 mmc cmd 8 err 0x00000100
[ 1.146][mmc]: mmc send if cond failed
[ 1.150][mmc]: mmc 2 cmd 55 timeout, err 100
[ 1.156][mmc]: mmc 2 mmc cmd 55 err 0x00000100
[ 1.160][mmc]: send app cmd failed
[ 1.163][mmc]: ************Try MMC card 2************
[ 1.210][mmc]: MID 000090 PSN 21da24ae
[ 1.213][mmc]: PNM H4G1d -- 0x48-34-47-31-64-04
[ 1.218][mmc]: PRV 0.3
[ 1.221][mmc]: MDT m-2 y-2016
[ 1.224][mmc]: MMC ver 4.5
[ 1.227][mmc]: ---------------mmc->clock 52000000-----------
[ 1.232][mmc]: ---------------mmc->bus_width 4--------------
[ 1.238][mmc]: SD/MMC Card: 4bit, capacity: 3728MB
[ 1.243][mmc]: boot0 capacity: 4000KB,boot1 capacity: 4000KB
[ 1.249][mmc]: ************SD/MMC 2 init OK!!!************
[ 1.256]sunxi flash init ok
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:10-
-name- -start- -size-
boot-resource: 1000000 2000000
env : 3000000 1000000
boot : 4000000 1000000
system : 5000000 30000000
data : 35000000 40000000
misc : 75000000 1000000
recovery : 76000000 2000000
cache : 78000000 20000000
databk : 98000000 8000000
UDISK : a0000000 0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_mmc
key 0
recovery key high 8, low 2
cant find fstbt value
misc partition found
misc_message->command = 0
to be run cmd=run setargs_mmc boot_normal
cant open script.bin, maybe it is not exist
WORK_MODE_BOOT
board_status_probe
[ 1.351]power trigger
bat_exist=0
[ 1.355]no battery exist
sunxi_bmp_display
[ 1.377]Hit any key to stop autoboot: 0
read boot or recovery all
[ 1.768]sunxi flash read :offset 4000000, 10194862 bytes OK
no signature
[ 1.777]ready to boot
[ 1.779]
Starting kernel ...
<7[ 0.143336] [ARISC ERROR] :arisc dvfs config type err!
[ 0.604641] ths_fetch_sysconfig_para: type err device_used = 1.
[ 0.613563] Bluetooth: get rtl8723bs rtl8723bs_bt_host_wake gpio failed
[ 0.613570]
[ 0.647605] otg_wakelock_init: No USB transceiver found
[ 1.467873] init: init.sunxi.3gdongle.rc: 2: ignored duplicate definition of service 'ril-daemon'
[ 1.478150] init: ***************************LOW MEM DEVICE DETECT
[ 1.484865] init: *******************************add swapon_all success
[ 1.492229] init: *******************************add write success
[ 1.571295] init: /dev/hw_random not found
[ 2.280442] ------------------>lcd_dclk_freq=9
[ 2.285476] ------------------>lcd_hbp=32
[ 2.366802] disp_clk_cfg, 1254, lcd_clk_div=6
[ 2.371751] LCD_open_flow, 110
[ 2.375140] LCD_power_on, 132
[ 2.472328] mem 428420 KB,mali shared mem is 512M
[ 2.478055] mali_platform_init(244): get gpu pll volt is 1200000000 mV!
[ 2.490539] MALI INIT SUCCESS!
[ 2.502310] sunxi_leds_fetch_sysconfig_para leds is not used in config
[ 2.532690] init: width = 480
[ 2.536009] init: height = 272
[ 2.539403] init: s.st_size = 2457600
[ 2.543549] init: logo match failed!fbsize = 522240
[ 2.551805] init: dont need format /dev/block/by-name/UDISK
[ 2.653286] ctp_fetch_sysconfig_para: ctp_power_io script_get_item err.
[ 2.661365] wakeup gpio_request is failed
[ 2.881278] STK_i2c_Tx: i2c error, retry over 3
[ 2.886312] STK831x_Init:failed
[ 2.889791] stk831x_probe:stk831x initialization failed
[ 3.002801] init: /dev/hw_random not found
[ 3.037472] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 3.090411] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[ 3.111227] init: powerctl: cannot expand '${sys.powerctl}'
[ 3.123134] android_usb: already disabled
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment