ggmicro bootup

[0]HELLO! BOOT0 is starting!
[2]boot0 commit : e9d7c88390ded1551ff4a4bcfef31cbc9cf717cb
 
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.65 (oe-user@oe-host) (gcc version 8.3.0 (GCC) ) #1 Tue Jul 21 03:52:29 UTC 2020
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Allwinner A1X (Device Tree), model: sun3iw1p1
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] cma: CMA: reserved 32 MiB at 82000000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: enforcing=1 earlyprintk= initcall_debug=0 console=ttyS0,115200 loglevel=7 root=/dev/nandd init=/sbin/init rdinit=/rdinit partitions=boot-resource@nanda:env@nandb:boot@nandc:rootfs@nandd:rootfs_data@nande:misc@nandf:private@nandg:UDISK@nandh cma=32M fb_base=0x83f80000 fb_base=0x83f80000 fb_base=0x83f80000 androidboot.serialno=0000000000000000000 boot_type=5
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Memory: 64MB = 64MB total
[    0.000000] Memory: 25680k/25680k available, 39856k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xc4800000 - 0xff000000   ( 936 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc4000000   (  64 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc04e9f84   (5000 kB)
[    0.000000]       .init : 0xc04ea000 - 0xc05085d0   ( 122 kB)
[    0.000000]       .data : 0xc050a000 - 0xc05f94a8   ( 958 kB)
[    0.000000]        .bss : 0xc05f94a8 - 0xc0628c08   ( 190 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] of_sunxi_clocks_init : sunxi_clk_base[0xf1c20000]
[    0.000000] pll_cpu-set_default_rate=552000000 success!
[    0.000000] pll_video-set_default_rate=297000000 success!
[    0.000000] pll_ddr-set_default_rate=312000000 success!
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] Console: colour dummy device 80x30
[    0.005330] Calibrating delay loop... 275.25 BogoMIPS (lpj=1376256)
[    0.075245] pid_max: default: 32768 minimum: 301
[    0.080425] Mount-cache hash table entries: 512
[    0.086329] CPU: Testing write buffer coherency: ok
[    0.092106] Setting up static identity map for 0xc03c0bc8 - 0xc03c0c20
[    0.101357] devtmpfs: initialized
[    0.106895] pinctrl core: initialized pinctrl subsystem
[    0.119270] NET: Registered protocol family 16
[    0.127279] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.134967] dump_class_init,844, success
[    0.143945] sun3iw1p1-pinctrl pio: initialized sunXi PIO driver
[    0.166911] bio: create slab <bio-0> at 0
[    0.172292] pwm module init!
[    0.177115] SCSI subsystem initialized
[    0.181293] usbcore: registered new interface driver usbfs
[    0.187208] usbcore: registered new interface driver hub
[    0.193087] usbcore: registered new device driver usb
[    0.198886] Linux video capture interface: v2.00
[    0.204269] Advanced Linux Sound Architecture Driver Initialized.
[    0.212080] cfg80211: Calling CRDA to update world regulatory domain
[    0.219622] Switching to clocksource sun3i high-res couter
[    0.244643] get det_vbus is fail, 84
[    0.250091] NET: Registered protocol family 2
[    0.256653] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.263767] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.270433] TCP: Hash tables configured (established 512 bind 512)
[    0.276999] TCP: reno registered
[    0.280399] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.286505] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.293581] NET: Registered protocol family 1
[    0.313696] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.320389] jffs2: version 2.2. © 2001-2006 Red Hat, Inc.
[    0.326996] msgmni has been set to 114
[    0.334315] io scheduler noop registered
[    0.338602] io scheduler cfq registered (default)
[    0.343479] [pm]aw_pm_init!
[    0.346804] [pm]valid
[    0.349213] [pm]valid
[    0.351929] [DISP]disp_module_init
[    0.405500] pll_freq=297000000HZ, lcd_dclk_freq=10000000HZ, clk_div=29
[    0.412588] *******************************
[    0.417013] ***
[    0.418887] *** LCD Panel Parameter Check
[    0.423043] ***
[    0.424909] ***             by guozhenjie
[    0.429101] ***
[    0.430974] ********************************
[    0.435423] ***
[    0.437293] *** Interface:
[    0.439867] 
[    0.441745] *** lcd_if:     1
[    0.444845] *** lcd_hv_if:  0
[    0.447977] *** lcd_cpu_if: 7
[    0.451079] *** Lcd Frm to RGB565
[    0.454529] ***
[    0.456421] *** Timing:
[    0.458996] *** lcd_x:      240
[    0.462272] *** lcd_y:      240
[    0.465575] *** lcd_ht:     495
[    0.468852] *** lcd_hbp:    11
[    0.472040] *** lcd_vt:     270
[    0.475315] *** lcd_vbp:    5
[    0.478442] *** lcd_hspw:   10
[    0.481632] *** lcd_vspw:   4
[    0.484732] *** lcd_frame_frq:  74Hz
[    0.488470] ***
[    0.490342] *** WRN03: Recommend "lcd_dclk_frq = 8"
[    0.495403] ***
[    0.497272] *** LCD Panel Parameter Check End
[    0.501780] *******************************
[    0.506228] num_screens=1
[    0.508985] screen_id=0
[    0.511559] para->mclk[MOD_CLK_LCD1CH0]=0xc180c340
[    0.516560] para->mclk[MOD_CLK_LCD1CH1]=0xc180c440
[    0.521514] disp tv init
[    0.524180] tcon_clk=0xc180c340, tcon_clk_parent=0x0
[    0.529339] tcon_clk=0xc180c340, tcon_clk_parent=0xc1804400
[    0.535088] tve_clk=0xc180c440, tve_clk_parent=0xc1804400
[    0.540685] disp al tv init
[    0.546359] fetch script datadisp.screen2_output_type fail
[    0.552323] fetch script datadisp.screen2_output_mode fail
[    0.560536] fetch script datadisp.fb2_format fail
[    0.565778] fetch script datadisp.fb2_scaler_mode_enable fail
[    0.571995] fetch script datadisp.fb2_width fail
[    0.577138] fetch script datadisp.fb2_height fail
[    0.584607] [DISP] Fb_map_kernel_logo,line:561:    this is not a bmp picture
[    0.596733] [DISP]disp_module_init finish
[    0.614763] uart1: ttyS0 at MMIO 0x1c25400 (irq = 104) is a SUNXI
[    0.621202] sw_console_setup()1324 - console setup baud 115200 parity n bits 8, flow n
[    0.629430] console [ttyS0] enabled, bootconsole disabled
[    0.629430] console [ttyS0] enabled, bootconsole disabled
[    0.642010] misc dump reg init
[    0.647326] [NAND]SPIC0_BASE_ADDR f1c05000
[    0.652491] [NAND]nand init start
[    0.656283] SpiNandHwInit: Start Nand Hardware initializing Jul 21 2020 03:53:24.....
[    0.664978] kernel: nand version: 3 6019 20181104 1256
[    0.672776] _get_spic_clk_v1: sclk0=0x32
[    1.558666]  nanda:
[    1.563920]  nandb: unknown partition table
[    1.571553]  nandc: unknown partition table
[    1.579117]  nandd: unknown partition table
[    1.586671]  nande: unknown partition table
[    1.592839]  nandf: unknown partition table
[    1.600784]  nandg: unknown partition table
[    1.608337]  nandh: unknown partition table
[    1.613838] [NAND]nand init end
[    1.618203] lradc_battery_probe:lradc_battery_probe ++++++
[    1.624304] lradc_battery_dts_parse:lradc_battery_dts_parse ++++++
[    1.631282] key base: f1c23400
[    1.634806] irq num: 113 !
[    1.638033] battery_data_hw_init:battery_data_hw_init ++++++
[    1.644372] lradc_battery_probe:lradc_battery_probe ------
[    1.650926] sunxi_tpadc_probe:sunxi_tpadc_probe ++++++
[    1.656726] sunxi_tpadc_dts_parse:sunxi_tpadc_dts_parse ++++++
[    1.663232] key base: f1c24800
[    1.666794] irq num: 114 !
[    1.669839] isr_register:114
[    1.673094] sunxi_tpadc_probe:sunxi_tpadc_probe ------
[    1.680381] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.688284] usbcore: registered new interface driver usb-storage
[    1.695042] usbcore: registered new interface driver ums-alauda
[    1.701794] usbcore: registered new interface driver ums-cypress
[    1.708612] usbcore: registered new interface driver ums-datafab
[    1.715356] usbcore: registered new interface driver ums_eneub6250
[    1.722363] usbcore: registered new interface driver ums-freecom
[    1.729176] usbcore: registered new interface driver ums-isd200
[    1.735887] usbcore: registered new interface driver ums-jumpshot
[    1.742730] usbcore: registered new interface driver ums-karma
[    1.749348] usbcore: registered new interface driver ums-onetouch
[    1.756296] usbcore: registered new interface driver ums-realtek
[    1.763069] usbcore: registered new interface driver ums-sddr09
[    1.769791] usbcore: registered new interface driver ums-sddr55
[    1.776511] usbcore: registered new interface driver ums-usbat
[    1.783863] gpio_request failed
[    1.787478] get regulator_io is no nocare
[    1.792082] sunxi_hcd_host0 1c13000.otghci0-controller: sunxi_hcd host driver
[    1.800101] sunxi_hcd_host0 1c13000.otghci0-controller: new USB bus registered, assigned bus number 1
[    1.811862] hub 1-0:1.0: USB hub found
[    1.816198] hub 1-0:1.0: 1 port detected
[    1.821046] wrn: hcd is not enable, need not stop hcd
[    1.828052] input: gpio-keys.7 as /devices/gpio-keys.7/input/input0
[    1.836368] sunxi cedar version 0.1 
[    1.840487] VE: install start!!!
[    1.840487] 
[    1.846057] cedar_ve: cedar-ve the get irq is 103
[    1.851927] VE: install end!!!
[    1.851927] 
[    1.861671] failed to get gpio-spk and gpio_num
[    1.868844] sunxi-internal-codec 1c23c00.codec: ASoC: DAPM unknown pin HPOUTR
[    1.876902] sunxi-internal-codec 1c23c00.codec: ASoC: DAPM unknown pin HPOUTL
[    1.884829] sunxi-internal-codec 1c23c00.codec: ASoC: DAPM unknown pin SPKL
[    1.892635] sunxi-internal-codec 1c23c00.codec: ASoC: DAPM unknown pin SPKR
[    1.900410] sunxi-codec-machine sound.2: ASoC: DAPM unknown pin External Speaker
[    1.916191] sunxi-codec-machine sound.2:  sun3iw1codec <-> 1c23c00.cpudai0-controller mapping ok
[    1.926239] sunxi-codec-machine sound.2: ASoC: no sink widget found for MainMic Bias
[    1.934874] sunxi-codec-machine sound.2: ASoC: Failed to add route External MainMic -> direct -> MainMic Bias
[    1.945967] sunxi-codec-machine sound.2: ASoC: no source widget found for MainMic Bias
[    1.954761] sunxi-codec-machine sound.2: ASoC: Failed to add route MainMic Bias -> direct -> MIC1P
[    1.964749] sunxi-codec-machine sound.2: ASoC: no source widget found for MainMic Bias
[    1.973578] sunxi-codec-machine sound.2: ASoC: Failed to add route MainMic Bias -> direct -> MIC1N
[    1.986107] ipip: IPv4 over IPv4 tunneling driver
[    1.992553] gre: GRE over IPv4 demultiplexor driver
[    1.998117] ip_gre: GRE over IPv4 tunneling driver
[    2.006024] TCP: cubic registered
[    2.009722] Initializing XFRM netlink socket
[    2.014505] NET: Registered protocol family 17
[    2.019711] NET: Registered protocol family 15
[    2.025158] VFP support v0.3: not present
[    2.031006] [LCD]lcd_module_init
[    2.039229] enhance_en=1
[    2.042103] matrixresult:(0xffffc001, 0x3c4, 0x0, 0x0)
[    2.048052] pll_freq=297000000HZ, lcd_dclk_freq=10000000HZ, clk_div=29
[    2.055333] clk_div=29
[    2.059320] [LCD]open, step 0 finish
[    2.165453] [LCD]open, step 1 finish
[    2.425425] [LCD]open, step 2 finish
[    2.535864] [LCD]open, step 3 finish
[    2.555548] [LCD]lcd_module_init finish
[    2.560284] usb_serial_number:20080411
[    2.564915] file system registered
[    2.571237] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.579024] android_usb gadget: Number of LUNs=3
[    2.584162]  lun0: LUN: removable file: (no medium)
[    2.589643]  lun1: LUN: removable file: (no medium)
[    2.595059]  lun2: LUN: removable file: (no medium)
[    2.601276] android_usb gadget: android_usb ready
[    2.606866] ALSA device list:
[    2.610176]   #0: audiocodec
[    2.621870] VFS: Mounted root (squashfs filesystem) readonly on device 93:48.
[    2.632484] devtmpfs: mounted
[    2.636674] Freeing unused kernel memory: 120K (c04ea000 - c0508000)
INIT: version 2.88 booting
[    3.872138] EXT4-fs (nande): recovery complete
[    3.879325] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: (null)
[    3.962119] EXT4-fs (nandh): recovery complete
[    3.970817] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: (null)
/dev/nandh: LABEL="UDISK" UUID="cc45249c-06e5-4ace-8ecd-e791fecd0dbe" TYPE="ext4"
/dev/nandh already format by ext4
/dev/nande: LABEL="rootfs_data" UUID="fd8b65c6-326f-4d9e-b210-427d233e18d2" TYPE="ext4"
/dev/nande already format by ext4
Starting udev
[    4.265564] 
[    4.265564] insmod_device_driver
[    4.265564] 
[    4.272670] device_chose finished 77!
[    4.505284] udevd[76]: starting version 3.2.7
[    4.560459] udevd[76]: specified group 'kvm' unknown
[    4.606365] udevd[77]: starting eudev-3.2.7
[    6.179724] lcdporch_store 97 bpa=0xc, fpa=0xc 
[    6.194023] can't find function irq on pin 1
hwclock: can't open '/dev/misc/rtc': No such file or directory
Tue Jul 21 04:04:41 UTC 2020
[    6.604846] input: gpio-keys.7 as /devices/gpio-keys.7/input/input1
hwclock: can't open '/dev/misc/rtc': No such file or directory
rm: can't remove '/tmp': Read-only file system
rm: can't remove '/etc/resolv.conf': Read-only file system
ln: /etc/resolv.conf: File exists
INIT: Entering runlevel: 5
Configuring network interfaces... ip: SIOCGIFFLAGS: No such device
hwclock: can't open '/dev/misc/rtc': No such file or directory
Starting syslogd/klogd: done

Vivid-Yocto-Distro V0.1 c200s-gamegearmicro /dev/ttyS0

c200s-gamegearmicro login: