working i.mx53 logs

snippet.txt

U-Boot 2009.08-00343-g6ff09d7 (Mar 20 2012 - 20:43:56)

CPU:   Freescale i.MX53 family 2.1V at 800 MHz
mx53 pll1: 800MHz
mx53 pll2: 400MHz
mx53 pll3: 216MHz
mx53 pll4: 455MHz
ipg clock     : 66666666Hz
ipg per clock : 33333333Hz
uart clock    : 66666666Hz
cspi clock    : 54000000Hz
ahb clock     : 133333333Hz
axi_a clock   : 400000000Hz
axi_b clock   : 200000000Hz
emi_slow clock: 133333333Hz
ddr clock     : 400000000Hz
esdhc1 clock  : 80000000Hz
esdhc2 clock  : 80000000Hz
esdhc3 clock  : 80000000Hz
esdhc4 clock  : 80000000Hz
nfc clock     : 26666666Hz
Board: MX53-SMD Rev. B
Boot Reason: [POR]
Boot Device: MMC
I2C:   ready
DRAM:   1 GB
MMC:   FSL_ESDHC: 0, FSL_ESDHC: 1
*** Warning - bad CRC or MMC, using default environment

In:    serial
Out:   serial
Err:   serial
da9052_i2c_is_connected - i2c write success....
Serial reinitilized!
Checking for recovery command file...
Card did not respond to voltage select!
** Bad partition 6 **
Net:   got MAC address from IIM: 00:04:9f:01:ef:c3
FEC0 [PRIME]
Hit any key to stop autoboot:  0 

MMC read: dev # 1, block # 2048, count 8192 partition # 0 ... 
8192 blocks read: OK

MMC read: dev # 1, block # 12288, count 768 partition # 0 ... 
768 blocks read: OK
## Booting kernel from Legacy Image at 70800000 ...
   Image Name:   Linux-2.6.38-01329-g3a4cc22
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3301040 Bytes =  3.1 MB
   Load Address: 70008000
   Entry Point:  70008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 70d00000 ...
   Image Name:   Android Root Filesystem
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    214337 Bytes = 209.3 kB
   Load Address: 70408000
   Entry Point:  70408000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Initializing cgroup subsys cpu
Linux version 2.6.38-01329-g3a4cc22 (b37172@B37172-Linux) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Tue Mar 20 20:48:12 CDT 2012
CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Freescale iMX53 SMD Board
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 171352
Kernel command line: console=ttymxc0,115200 init=/init androidboot.console=ttymxc0 video=mxcdi1fb:RGB666,LDB-XGA ldb=di1 di1_primary pmem=128M,64M fbmem=10M gpu_memory=128M vmalloc=576M fs_sdcard=0
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
allocated 7864320 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 512MB 169MB = 681MB total
Memory: 673360k/673360k available, 375216k reserved, 468320K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xfbe00000 - 0xffe00000   (  64 MB)
    vmalloc : 0xce800000 - 0xf2000000   ( 568 MB)
    lowmem  : 0xc0000000 - 0xce000000   ( 224 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .init : 0xc0008000 - 0xc0039000   ( 196 kB)
      .text : 0xc0039000 - 0xc0627980   (6075 kB)
      .data : 0xc0628000 - 0xc0687b60   ( 383 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:848
TrustZone Interrupt Controller (TZIC) initialized
MXC GPIO hardware
sched_clock: 32 bits at 8MHz, resolution 125ns, wraps every 536870ms
MXC_Early serial console at MMIO 0x53fbc000 (options '115200')
bootconsole [ttymxc0] enabled
Console: colour dummy device 80x30
Calibrating delay loop... 999.42 BogoMIPS (lpj=4997120)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
IRAM READY
IMX usb wakeup probe
IMX usb wakeup probe
bio: create slab <bio-0> at 0
SCSI subsystem initialized
spi_imx imx53-ecspi.0: probed
Freescale USB OTG Driver loaded, $Revision: 1.55 $
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
da9052_i2c_is_connected - i2c read success....
DA9053 chip ID reg read=0xa3 
BB version probed
imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
Advanced Linux Sound Architecture Driver Version 1.0.23.
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
i2c-core: driver [max17135] using legacy suspend method
i2c-core: driver [max17135] using legacy resume method
i2c-core: driver [mc13892] using legacy suspend method
i2c-core: driver [mc13892] using legacy resume method
Switching to clocksource mxc_timer1
Switched to NOHz mode on CPU #0
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Freeing initrd memory: 208K
Bus freq driver module loaded
sdram autogating driver module loaded
Static Power Management for Freescale i.MX5
cpaddr = ce840000 suspend_iram_base=ce88e000
PM driver module loaded
rfkill: Bluetooth RF turn on
imx_bt_rfkill driver success loaded
i.MXC CPU frequency driver
highmem bounce pool size: 64 pages
ashmem: initialized
msgmni has been set to 400
cryptodev: driver loaded.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver ldb
_regulator_get: get() with no identifier
imx-ipuv3 imx-ipuv3.0: Channel already disabled 9
imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 9
imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
imx-ipuv3 imx-ipuv3.0: Channel already disabled 10
imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 10
mxc_sdc_fb mxc_sdc_fb.1: register mxc display driver hdmi
sii902x 2-0039: found device 9022
sii902x 2-0039: Can not read edid
fbcvt: 1024x768@60: CVT Name - .786M3
imx-ipuv3 imx-ipuv3.0: Channel already disabled 7
imx-ipuv3 imx-ipuv3.0: Channel already uninitialized 7
Serial: IMX driver
imx-uart.0: ttymxc0 at MMIO 0x53fbc000 (irq = 31) is a IMX
console [ttymxc0] enabled, bootconsole disabled
console [ttymxc0] enabled, bootconsole disabled
imx-uart.1: ttymxc1 at MMIO 0x53fc0000 (irq = 32) is a IMX
imx-uart.2: ttymxc2 at MMIO 0x5000c000 (irq = 33) is a IMX
loop: module loaded
pmem_adsp: 1 init
pmem_gpu: 0 init
vcan: Virtual CAN interface driver
FEC Ethernet Driver
fec_enet_mii_bus: probed
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 18, io base 0x53f80000
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
fsl-ehci fsl-ehci.1: irq 14, io base 0x53f80200
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
ARC USBOTG Device Controller driver (1 August 2005)
android_usb gadget: Mass Storage Function, version: 2009/09/11
android_usb gadget: Number of LUNs=1
 lun0: LUN: removable file: (no medium)
Gadget Android: controller 'fsl-usb2-udc' not recognized
android_usb gadget: android_usb ready
Suspend udc for OTG auto detect
fsl-usb2-udc: bind to driver android_usb 
mousedev: could not register psaux device, error: -16
mousedev: PS/2 mouse device common for all mice
input: gpio-keys as /devices/platform/gpio-keys/input/input0
mpr121 1-005a: mpr121: config as enable 4 of electrode.
input: FSL MPR121 Touchkey as /devices/platform/imx-i2c.1/i2c-1/1-005a/input/input1
mpr121 1-005a: Mpr121 touch keyboard init success.
i2c-core: driver [mpr121] using legacy suspend method
i2c-core: driver [mpr121] using legacy resume method
p1003_fwv33 2-0041: couldn't read panel infomation.
p1003_fwv33: probe of 2-0041 failed with error -5
input: eGalax Touch Screen as /devices/platform/imx-i2c.2/i2c-2/2-0004/input/input2
input: da9052-onkey as /devices/platform/imx-i2c.0/i2c-0/0-0048/da9052-onkey/input/input3
usb 2-1: new high speed USB device using fsl-ehci and address 2
input: isl29023 light sensor as /devices/virtual/input/input4
isl29023 2-0044: driver version 1.0 enabled
i2c-core: driver [isl29023] using legacy suspend method
i2c-core: driver [isl29023] using legacy resume method
using rtc device, da9052-rtc, for alarms
da9052-rtc da9052-rtc: rtc core: registered da9052-rtc as rtc0
i2c /dev entries driver
Linux video capture interface: v2.00
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video18
i2c-core: driver [mma8450] using legacy suspend method
i2c-core: driver [mma8450] using legacy resume method
add mma8450 i2c driver
input: mma845x as /devices/virtual/input/input5
mag3110 1-000e: check mag3110 chip ID
input: mag3110 as /devices/virtual/input/input6
mag3110 1-000e: mag3110 is probed
i2c-core: driver [mag3110] using legacy suspend method
i2c-core: driver [mag3110] using legacy resume method
imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCIATH3K protocol initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
imx-sdma imx-sdma: loaded firmware 1.0
imx-sdma imx-sdma: initialized
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
mmc0: no vmmc regulator found
mmc0: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA
mmc1: no vmmc regulator found
mmc1: SDHCI controller on platform [sdhci-esdhc-imx.1] using DMA
mmc2: no vmmc regulator found
mmc2: SDHCI controller on platform [sdhci-esdhc-imx.0] using DMA
VPU initialized
mxc_asrc registered
gpu mmu disabled
mmc0: new high speed MMC card at address 0001
mmcblk0: mmc0:0001 SEM08G 7.39 GiB 
 mmcblk0: p1 p2 p3 < p5 p6 > p4
mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
mmc1: new high speed SDIO card at address 0001
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
mxc_spdif mxc_spdif.0: MXC SPDIF Audio
Cirrus Logic CS42888 ALSA SoC Codec Driver
i2c-core: driver [cs42888] using legacy suspend method
i2c-core: driver [cs42888] using legacy resume method
sgtl5000 1-000a: sgtl5000 revision 17
asoc: sgtl5000 <-> imx-ssi.1 mapping ok
input: sgtl5000-audio Headphone Jack as /devices/platform/soc-audio.1/sound/card0/input7
imx_3stack asoc driver
asoc: mxc-spdif <-> imx-spdif-dai.0 mapping ok
ALSA device list:
  #0: sgtl5000-audio
  #1: imx-spdif
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (10524 buckets, 42096 max)
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
can: raw protocol (rev 20090105)
can: broadcast manager protocol (rev 20090105 t)
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
NET: Registered protocol family 35
lib80211: common routines for IEEE802.11 drivers
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
mxc_dvfs_core_probe
DVFS driver module loaded
regulator_init_complete: DA9052_BUCK_PERI: incomplete constraints, leaving on
regulator_init_complete: DA9052_BUCK_MEM: incomplete constraints, leaving on
regulator_init_complete: DA9052_BUCK_PRO: incomplete constraints, leaving on
regulator_init_complete: DA9052_BUCK_CORE: incomplete constraints, leaving on
regulator_init_complete: DA9052_LDO10: incomplete constraints, leaving on
regulator_init_complete: DA9052_LDO8: incomplete constraints, leaving on
regulator_init_complete: DA9052_LDO6: incomplete constraints, leaving on
regulator_init_complete: DA9052_LDO5: incomplete constraints, leaving on
regulator_init_complete: DA9052_LDO4: incomplete constraints, leaving on
regulator_init_complete: DA9052_LDO3: incomplete constraints, leaving on
regulator_init_complete: DA9052_LDO1: incomplete constraints, leaving on
da9052-rtc da9052-rtc: setting system clock to 2000-01-01 00:28:33 UTC (946686513)
Freeing init memory: 196K
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
EXT4-fs (mmcblk0p5): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (mmcblk0p5): recovery complete
EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
EXT4-fs (mmcblk0p6): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (mmcblk0p6): recovery complete
EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
rfkill: Bluetooth RF turn off
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
android_usb: already disabled
mtp_bind_config
adb_bind_config
warning: `adbd' uses 32-bit capabilities (legacy support in use)
adb_open
input: eCompass as /devices/virtual/input/input8
root@android:/ # pmem: request for physical address of pmem region from process 2289.
er.ServerThread (2378): /proc/2365/oom_adj is deprecated, please use /proc/2365/oom_score_adj instead.
request_suspend_state: wakeup (3->0) at 15687648628 (2000-01-01 00:28:45.308990001 UTC)
rfkill: Bluetooth RF turn on
Unhandled fault: external abort on non-linefetch (0x1018) at 0x41200054
eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:00, irq=-1)
Unhandled fault: external abort on non-linefetch (0x1018) at 0x40006054
ADDRCONF(NETDEV_UP): eth0: link is not ready
acc_open
acc_release
Unhandled fault: external abort on non-linefetch (0x1018) at 0x4123c054
Unhandled fault: external abort on non-linefetch (0x1018) at 0x4006f054
rfkill: Bluetooth RF turn off
rfkill: Bluetooth RF turn on
init: untracked pid 2426 exited
Unhandled fault: external abort on non-linefetch (0x1018) at 0x4006f054
Unhandled fault: external abort on non-linefetch (0x1018) at 0x4123c054
Unhandled fault: external abort on non-linefetch (0x1018) at 0x4123c054
Unhandled fault: external abort on non-linefetch (0x1018) at 0x4123c054
Unhandled fault: external abort on non-linefetch (0x1018) at 0x41239054
Unhandled fault: external abort on non-linefetch (0x1018) at 0x41239054
Unhandled fault: external abort on non-linefetch (0x1018) at 0x4006f054
Unhandled fault: external abort on non-linefetch (0x1018) at 0x41d5d054
Unhandled fault: external abort on non-linefetch (0x1018) at 0x41213054
Unhandled fault: external abort on non-linefetch (0x1018) at 0x427b6054
Not all allocated memory blocks were freed. Doing it now.