gistfile1.txt

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.18.31-g57d4e3634e63-dirty (cubbins@BuildMachine) (gcc version 4.9 20150123 (prerelease) (GCC) ) #8 SMP PREEMPT Tue May 23 21:22:51 EEST 2017
[    0.000000] CPU: AArch64 Processor [410fd031] revision 1
[    0.000000] alternatives: enabling workaround for ARM errata 826319, 827319, 824069
[    0.000000] alternatives: enabling workaround for ARM erratum 845719
[    0.000000] Machine: SoMC Tulip SMB1360
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: reserved region for node 'external_image__region@0': base 0x0000000085b00000, size 13 MiB
[    0.000000] Reserved memory: reserved region for node 'modem_adsp_region@0': base 0x0000000086800000, size 85 MiB
[    0.000000] Reserved memory: reserved region for node 'peripheral_region@0': base 0x000000008bd00000, size 6 MiB
[    0.000000] Reserved memory: reserved region for node 'splash_region@83000000': base 0x0000000083000000, size 32 MiB
[    0.000000] Reserved memory: reserved region for node 'pstore_reserve_mem_region@a0000000': base 0x00000000a0000000, size 1 MiB
[    0.000000] Removed memory: created DMA memory pool at 0x0000000085b00000, size 13 MiB
[    0.000000] Reserved memory: initialized node external_image__region@0, compatible id removed-dma-pool
[    0.000000] Removed memory: created DMA memory pool at 0x0000000086800000, size 85 MiB
[    0.000000] Reserved memory: initialized node modem_adsp_region@0, compatible id removed-dma-pool
[    0.000000] Removed memory: created DMA memory pool at 0x000000008bd00000, size 6 MiB
[    0.000000] Reserved memory: initialized node peripheral_region@0, compatible id removed-dma-pool
[    0.000000] Reserved memory: allocated memory for 'venus_region@0' node: base 0x000000008f800000, size 8 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x000000008f800000, size 8 MiB
[    0.000000] Reserved memory: initialized node venus_region@0, compatible id shared-dma-pool
[    0.000000] Reserved memory: allocated memory for 'secure_region@0' node: base 0x00000000f9000000, size 112 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f9000000, size 112 MiB
[    0.000000] Reserved memory: initialized node secure_region@0, compatible id shared-dma-pool
[    0.000000] Reserved memory: allocated memory for 'qseecom_region@0' node: base 0x00000000f8000000, size 16 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f8000000, size 16 MiB
[    0.000000] Reserved memory: initialized node qseecom_region@0, compatible id shared-dma-pool
[    0.000000] Reserved memory: allocated memory for 'audio_region@0' node: base 0x00000000f7c00000, size 4 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x00000000f7c00000, size 4 MiB
[    0.000000] Reserved memory: initialized node audio_region@0, compatible id shared-dma-pool
[    0.000000] Removed memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[    0.000000] Reserved memory: initialized node pstore_reserve_mem_region@a0000000, compatible id removed-dma-pool
[    0.000000] cma: Reserved 48 MiB at 0x00000000f4c00000
[    0.000000] PERCPU: Embedded 13 pages/cpu @ffffffc0749f7000 s22144 r0 d31104 u53248
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 489216
[    0.000000] Kernel command line: boot_cpus=0,4,5,6,7 sched_enable_hmp=1 console=ttyHSL0,115200,n8 lpm_levels.sleep_disabled=1 boot_cpus=0-5 androidboot.selinux=permissive msm_rtb.filter=0x3F ehci-hcd.park=3 dwc3.maximum_speed=high dwc3_msm.prop_chg_detect=Y coherent_pool=8M sched_enable_power_aware=1 user_debug=31 androidboot.hardware=tulip buildvariant=userdebug androidboot.emmc=true androidboot.bootloader=s1 oemandroidboot.s1boot=1291-8005_S1_Boot_MSM8939_LA2.0_207 androidboot.serialno=YT9118XRSZ ta_info=1,16,256 startup=0x00000001 warmboot=0x77665501 oemandroidboot.imei=3581400645873000 oemandroidboot.phoneid=0000:3581400645873000,0000:3581400645873100 oemandroidboot.security=0 oemandroidboot.babeee48=00000200 oemandroidboot.securityflags=0x00000003 display_status=on androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_nt35521_720p_video:1:none
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Memory: 1701080K/1989632K available (11822K kernel code, 2530K rwdata, 5440K rodata, 484K init, 2348K bss, 288552K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0000000 - 0xffffffbdc2000000   (    32 MB actual)
[    0.000000]     PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000   (    16 MB)
[    0.000000]     fixed   : 0xffffffbffbdfd000 - 0xffffffbffbdff000   (     8 KB)
[    0.000000]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc080000000   (  2048 MB)
[    0.000000]       .init : 0xffffffc00115e000 - 0xffffffc0011d7000   (   484 KB)
[    0.000000]       .text : 0xffffffc000080000 - 0xffffffc00115d854   ( 17271 KB)
[    0.000000]       .data : 0xffffffc0011e1000 - 0xffffffc001459a00   (  2531 KB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] HMP scheduling enabled.
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
[    0.000000] MPM 1 irq mapping errored -517
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-7.
[    0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[    0.000023] Switched to clocksource arch_sys_counter
[    0.002685] allocated 8388608 bytes of page_cgroup
[    0.002695] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.002712] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.002726] pid_max: default: 32768 minimum: 301
[    0.002846] Security Framework initialized
[    0.002876] SELinux:  Initializing.
[    0.003021] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.003034] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.003927] Initializing cgroup subsys memory
[    0.003956] Initializing cgroup subsys devices
[    0.003972] Initializing cgroup subsys freezer
[    0.003988] Initializing cgroup subsys debug
[    0.004737] /cpus/cpu@100: Missing clock-frequency property
[    0.004759] /cpus/cpu@101: Missing clock-frequency property
[    0.004780] /cpus/cpu@102: Missing clock-frequency property
[    0.004803] /cpus/cpu@103: Missing clock-frequency property
[    0.004828] /cpus/cpu@0: Missing clock-frequency property
[    0.004855] /cpus/cpu@1: Missing clock-frequency property
[    0.004885] /cpus/cpu@2: Missing clock-frequency property
[    0.004916] /cpus/cpu@3: Missing clock-frequency property
[    0.005158] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[    0.005209] EFI services will not be available.
[    0.013887] 
[    0.013887] **********************************************************
[    0.013901] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.013909] **                                                      **
[    0.013917] ** trace_printk() being used. Allocating extra memory.  **
[    0.013924] **                                                      **
[    0.013932] ** This means that this is a DEBUG kernel and it is     **
[    0.013939] ** unsafe for produciton use.                           **
[    0.013946] **                                                      **
[    0.013954] ** If you see this message and you are not debugging    **
[    0.013961] ** the kernel, report this immediately to your vendor!  **
[    0.013968] **                                                      **
[    0.013975] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.013983] **********************************************************
[    0.023597] Core Debug Lock unlocked
[    0.024182] MSM Memory Dump base table set up
[    0.024211] MSM Memory Dump apps data table set up
[    0.026277] cpu_clock_a53_init_little: A53 Power clocks configured
[    0.047664] Brought up 6 CPUs
[    0.047681] SMP: Total of 6 processors activated.
[    0.047761] alternatives: patching kernel code
[    0.070748] pinctrl core: initialized pinctrl subsystem
[    0.071459] regulator-dummy: no parameters
[    0.167988] NET: Registered protocol family 16
[    0.210126] cpuidle: using governor ladder
[    0.230118] cpuidle: using governor menu
[    0.250119] cpuidle: using governor qcom
[    0.251551] vdso: 2 pages (1 code @ ffffffc0011e9000, 1 data @ ffffffc0011e8000)
[    0.252701] software IO TLB [mem 0xf0800000-0xf0c00000] (4MB) mapped at [ffffffc070800000-ffffffc070bfffff]
[    0.257649] DMA: preallocated 8192 KiB pool for atomic allocations
[    0.274085] sps:sps is ready.
[    0.274803] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
[    0.275221] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
[    0.275712] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
[    0.275725] msm_rpm_dev_probe: APSS-RPM communication over SMD
[    0.279502] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
[    0.279525] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
[    0.279560] msm-thermal soc:qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
[    0.279581] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
[    0.279686] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
[    0.279697] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
[    0.279710] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
[    0.279723] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
[    0.286376] i2c-msm-v2 78ba000.i2c: could not find pctldev for node /soc/pinctrl@1000000/pmx_i2c_6/i2c_6_active, deferring probe
[    0.286948] i2c-msm-v2 78b6000.i2c: could not find pctldev for node /soc/pinctrl@1000000/pmx_i2c_0/i2c_0_active, deferring probe
[    0.287442] i2c-msm-v2 78b8000.i2c: could not find pctldev for node /soc/pinctrl@1000000/pmx_i2c_4/i2c_4_active, deferring probe
[    0.287925] i2c-msm-v2 78b9000.i2c: could not find pctldev for node /soc/pinctrl@1000000/pmx_i2c_5/i2c_5_active, deferring probe
[    0.288452] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
[    0.296729] irq: no irq domain found for /soc/pinctrl@1000000 !
[    0.297619] persistent_ram: uncorrectable error in header
[    0.297749] persistent_ram: uncorrectable error in header
[    0.297869] persistent_ram: uncorrectable error in header
[    0.297963] persistent_ram: error in header, 4
[    0.298092] persistent_ram: uncorrectable error in header
[    0.298214] persistent_ram: uncorrectable error in header
[    0.802940] persistent_ram: uncorrectable error in header
[    0.802952] persistent_ram: found existing invalid buffer, size 131060, start 110876
[    0.821766] console [pstore-1] enabled
[    0.821861] pstore: Registered ramoops as persistent store backend
[    0.822033] ramoops: attached 0x100000@0xa0000000, ecc: 16/0
[    0.822753] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
[    0.823603] platform 4080000.qcom,mss: assigned reserved memory node modem_adsp_region@0
[    0.829168] platform a21b000.qcom,pronto: assigned reserved memory node peripheral_region@0
[    0.830618] ACC: mem_acc_efuse_init: efuse_addr = 0x0000000000058000 (len=0x1000)
[    0.831213] mem_acc_corner: 0 <--> 0 mV 
[    0.832278] cpr_efuse_init: apc_corner: efuse_addr = 0x0000000000058000 (len=0x1000)
[    0.832432] cpr_read_fuse_revision: apc_corner: fuse revision = 3
[    0.832610] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x2848b129045293e9, speed_bits = 2
[    0.832709] cpr_parse_pvs_version_fuse: apc_corner: [row: 1000]: 0x1a, pvs_version = 2
[    0.832982] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1050000 -> 1070000 uV
[    0.833163] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1070000 1262500] uV
[    0.833335] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
[    0.833431] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1137500] uV
[    0.856193] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[    0.860258] smd_channel_probe_now: allocation table not initialized
[    0.861750] smd_channel_probe_now: allocation table not initialized
[    0.868829] cpu-clock-8939 b111050.qcom,cpu-clock-8939: Speed bin: 2 PVS Version: 2
[    0.877581] __of_mpm_init(): MPM driver mapping exists
[    0.879362] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
[    0.879464] msm_rpm_dev_probe: APSS-RPM communication over SMD
[    0.880639] 8916_s1_corner: 0 <--> 0 mV at 0 mV normal idle 
[    0.881618] 8916_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
[    0.882617] 8916_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle 
[    0.883780] 8916_s2_corner: 0 <--> 0 mV at 0 mV normal idle 
[    0.884679] 8916_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
[    0.885633] 8916_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle 
[    0.886808] 8916_s3: 1200 <--> 1300 mV at 1200 mV normal idle 
[    0.888060] 8916_s4: 1800 <--> 2100 mV at 1800 mV normal idle 
[    0.889205] 8916_l1: 1225 <--> 1300 mV at 1300 mV normal idle 
[    0.890491] 8916_l2: 1200 mV normal idle 
[    0.891630] 8916_l3: 500 <--> 1287 mV at 0 mV normal idle 
[    0.892535] 8916_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
[    0.893485] 8916_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle 
[    0.894657] 8916_l4: 2050 mV normal idle 
[    0.895826] 8916_l5: 1800 mV normal idle 
[    0.896965] 8916_l6: 1800 mV normal idle 
[    0.898213] 8916_l7: 1800 mV normal idle 
[    0.899072] 8916_l7_ao: 1800 mV normal idle 
[    0.900270] 8916_l8: 2850 <--> 2900 mV at 2850 mV normal idle 
[    0.901527] 8916_l9: 3300 mV normal idle 
[    0.902670] 8916_l10: 2700 <--> 2800 mV at 2800 mV normal idle 
[    0.903919] 8916_l11: 1800 <--> 2950 mV at 1800 mV normal idle 
[    0.905069] 8916_l12: 1800 <--> 2950 mV at 1800 mV normal idle 
[    0.906324] 8916_l13: 3075 mV normal idle 
[    0.907468] 8916_l14: 1800 <--> 3300 mV at 1800 mV normal idle 
[    0.908707] 8916_l15: 1800 <--> 3300 mV at 1800 mV normal idle 
[    0.909876] 8916_l16: 1800 <--> 3300 mV at 1800 mV normal idle 
[    0.911129] 8916_l17: 2850 mV normal idle 
[    0.912292] 8916_l18: 2700 <--> 2850 mV at 2850 mV normal idle 
[    0.913609] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
[    0.913789] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
[    0.913962] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
[    0.914141] msm-thermal soc:qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
[    0.914322] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
[    0.915014] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.915189] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.915288] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.915458] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    0.915625] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
[    0.915735] msm-thermal soc:qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
[    0.917377] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.917550] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.917724] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.917818] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    0.917990] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.918160] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
[    0.918331] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    0.918426] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    0.926263] qcom,rpmcc-8936 1874000.qcom,rpmcc: Registered RPM clocks.
[    0.951315] qcom,gcc-spm-8936 b111200.qcom,spm: Registered GCC SPM clocks
[    0.951516] qcom,gcc-8936 1800000.qcom,gcc: Registered GCC clocks
[    0.952543] i2c-msm-v2 78ba000.i2c: probing driver i2c-msm-v2
[    0.952802] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.952976] i2c-msm-v2 78ba000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.955064] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[    0.955289] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.955462] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.957802] i2c i2c-0: Failed to register i2c client bmg160 at 0x68 (-16)
[    0.957903] i2c i2c-0: of_i2c: Failure registering /soc/i2c@78b6000/mems_gyro@68
[    0.958869] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
[    0.959173] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.959270] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.960930] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.961710] ncp6335d-regulator 4-001c: Detected Regulator NCP6335D PID = 21
[    0.968036] ncp6335d: 1050 <--> 1350 mV at 1150 mV fast normal 
[    0.970473] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
[    0.970784] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.970883] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.972901] cpr_efuse_init: apc_corner: efuse_addr = 0x0000000000058000 (len=0x1000)
[    0.973132] cpr_read_fuse_revision: apc_corner: fuse revision = 3
[    0.973237] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x2848b129045293e9, speed_bits = 2
[    0.973412] cpr_parse_pvs_version_fuse: apc_corner: [row: 1000]: 0x1a, pvs_version = 2
[    0.973686] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1050000 -> 1070000 uV
[    0.973868] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1070000 1262500] uV
[    0.973966] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1150000 1350000] uV
[    0.974137] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1137500] uV
[    0.974729] cpr_init_cpr_parameters: apc_corner: up threshold = 0, down threshold = 8
[    0.974848] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
[    0.975045] cpr_init_cpr_efuse: apc_corner: [row:27] = 0xcc91ea047aa952a9
[    0.975233] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 1146
[    0.975330] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 1146
[    0.975503] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1354
[    0.975789] cpr_adjust_target_quots: apc_corner: Corner[2]: adjusted target quot = 1187
[    0.975888] cpr_adjust_target_quots: apc_corner: Corner[3]: adjusted target quot = 1230
[    0.976134] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.000
[    0.976305] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.124
[    0.976501] cpr_virtual_corner_quot_adjust: apc_corner: corner=4 adjusted quotient=1083
[    0.976676] cpr_virtual_corner_quot_adjust: apc_corner: corner=5 adjusted quotient=1083
[    0.976774] cpr_virtual_corner_quot_adjust: apc_corner: corner=6 adjusted quotient=1083
[    0.976948] cpr_virtual_corner_quot_adjust: apc_corner: corner=7 adjusted quotient=1083
[    0.977121] cpr_virtual_corner_quot_adjust: apc_corner: corner=8 adjusted quotient=1083
[    0.977295] cpr_virtual_corner_quot_adjust: apc_corner: corner=9 adjusted quotient=1083
[    0.977394] cpr_virtual_corner_quot_adjust: apc_corner: corner=10 adjusted quotient=1083
[    0.977566] cpr_virtual_corner_quot_adjust: apc_corner: corner=11 adjusted quotient=1083
[    0.977741] cpr_virtual_corner_quot_adjust: apc_corner: corner=12 adjusted quotient=1146
[    0.977840] cpr_virtual_corner_quot_adjust: apc_corner: corner=13 adjusted quotient=1146
[    0.978060] cpr_virtual_corner_quot_adjust: apc_corner: corner=24 adjusted quotient=1426
[    0.978248] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 1146
[    0.978342] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 1146
[    0.978435] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 1146
[    0.978603] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 1083
[    0.978772] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 1083
[    0.978865] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1083
[    0.979033] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1083
[    0.979201] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[8] = 1083
[    0.979295] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[9] = 1083
[    0.979463] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[10] = 1083
[    0.979631] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[11] = 1083
[    0.979724] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[12] = 1146
[    0.979893] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[13] = 1146
[    0.980146] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[14] = 1187
[    0.980242] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[15] = 1197
[    0.980410] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[16] = 1207
[    0.980580] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[17] = 1216
[    0.980673] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[18] = 1219
[    0.980842] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[19] = 1226
[    0.981010] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[20] = 1230
[    0.981104] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[21] = 1230
[    0.981197] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[22] = 1230
[    0.981366] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[23] = 1230
[    0.981533] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[24] = 1426
[    0.981626] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[25] = 1230
[    0.981793] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[26] = 1230
[    0.981962] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[27] = 1230
[    0.982055] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[28] = 1230
[    0.982362] cpr_virtual_corner_voltage_adjust: apc_corner: corner=24 adjusted open-loop voltage=1297500
[    0.982632] cpr_fill_override_voltage: apc_corner: floor override voltage: [1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1050000 1100000 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500 1137500] uV
[    0.983086] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
[    0.983948] apc_corner: 0 <--> 0 mV 
[    0.985155] cpu-clock-8939 b111050.qcom,cpu-clock-8939: Speed bin: 2 PVS Version: 2
[    0.988902] Rate 0 for a53_lc_clk is greater than highest Fmax
[    0.988998] ------------[ cut here ]------------
[    0.989182] WARNING: CPU: 3 PID: 6 at drivers/clk/msm/clock-cpu-8939.c:817 clock_a53_probe+0x764/0xc44()
[    0.989348] Unable to turn on CPU clock
[    0.989446] CPU: 3 PID: 6 Comm: kworker/u16:0 Not tainted 3.18.31-g57d4e3634e63-dirty #8
[    0.989698] Hardware name: SoMC Tulip SMB1360 (DT)
[    0.989800] Workqueue: deferwq deferred_probe_work_func
[    0.989977] Call trace:
[    0.990076] [<ffffffc0000899a8>] dump_backtrace+0x0/0x268
[    0.990173] [<ffffffc000089c24>] show_stack+0x14/0x1c
[    0.990347] [<ffffffc000bf31b8>] dump_stack+0x84/0xa8
[    0.990447] [<ffffffc0000a27f0>] warn_slowpath_common+0x88/0xb0
[    0.990620] [<ffffffc0000a28a4>] warn_slowpath_fmt+0x60/0x80
[    0.990715] [<ffffffc0008c8044>] clock_a53_probe+0x764/0xc44
[    0.990888] [<ffffffc0005404e0>] platform_drv_probe+0x38/0x84
[    0.990982] [<ffffffc00053eb68>] driver_probe_device+0x160/0x370
[    0.991153] [<ffffffc00053eda4>] __device_attach+0x2c/0x4c
[    0.991251] [<ffffffc00053d4b0>] bus_for_each_drv+0x7c/0xac
[    0.991421] [<ffffffc00053eec4>] device_attach+0x70/0x9c
[    0.991517] [<ffffffc00053d6bc>] bus_probe_device+0x2c/0xa0
[    0.991686] [<ffffffc00053e464>] deferred_probe_work_func+0x98/0xc8
[    0.991784] [<ffffffc0000b8134>] process_one_work+0x254/0x444
[    0.991955] [<ffffffc0000b8620>] worker_thread+0x2fc/0x418
[    0.992052] [<ffffffc0000bd4d4>] kthread+0xec/0xf4
[    0.992269] ---[ end trace 6d435d0d611f769c ]---
[    0.992365] Rate 0 for a53_lc_clk is greater than highest Fmax
[    0.992457] ------------[ cut here ]------------
[    0.992631] WARNING: CPU: 3 PID: 6 at drivers/clk/msm/clock-cpu-8939.c:817 clock_a53_probe+0x764/0xc44()
[    0.992797] Unable to turn on CPU clock
[    0.992893] CPU: 3 PID: 6 Comm: kworker/u16:0 Tainted: G        W      3.18.31-g57d4e3634e63-dirty #8
[    0.993144] Hardware name: SoMC Tulip SMB1360 (DT)
[    0.993242] Workqueue: deferwq deferred_probe_work_func
[    0.993496] Call trace:
[    0.993593] [<ffffffc0000899a8>] dump_backtrace+0x0/0x268
[    0.993690] [<ffffffc000089c24>] show_stack+0x14/0x1c
[    0.993865] [<ffffffc000bf31b8>] dump_stack+0x84/0xa8
[    0.993962] [<ffffffc0000a27f0>] warn_slowpath_common+0x88/0xb0
[    0.994133] [<ffffffc0000a28a4>] warn_slowpath_fmt+0x60/0x80
[    0.994228] [<ffffffc0008c8044>] clock_a53_probe+0x764/0xc44
[    0.994399] [<ffffffc0005404e0>] platform_drv_probe+0x38/0x84
[    0.994496] [<ffffffc00053eb68>] driver_probe_device+0x160/0x370
[    0.994667] [<ffffffc00053eda4>] __device_attach+0x2c/0x4c
[    0.994764] [<ffffffc00053d4b0>] bus_for_each_drv+0x7c/0xac
[    0.994934] [<ffffffc00053eec4>] device_attach+0x70/0x9c
[    0.995031] [<ffffffc00053d6bc>] bus_probe_device+0x2c/0xa0
[    0.995202] [<ffffffc00053e464>] deferred_probe_work_func+0x98/0xc8
[    0.995300] [<ffffffc0000b8134>] process_one_work+0x254/0x444
[    0.995470] [<ffffffc0000b8620>] worker_thread+0x2fc/0x418
[    0.995566] [<ffffffc0000bd4d4>] kthread+0xec/0xf4
[    0.995733] ---[ end trace 6d435d0d611f769d ]---
[    0.996372] populate_opp_table: clock-cpu-8939: OPP tables populated (cpu 0 and 3)
[    0.996543] print_opp_table: clock_cpu: a53_c1: OPP voltage for 400000000: 1050000
[    0.996794] print_opp_table: clock_cpu: a53_c1: OPP voltage for 1459200000: 1262500
[    1.062164] qcom,qpnp-pin qpnp-pin-2: qpnp_pin_probe: no device nodes specified in topology
[    1.062361] qcom,qpnp-pin: probe of qpnp-pin-2 failed with error -22
[    1.064552] KPI: Bootloader start count = 57476
[    1.064649] KPI: Bootloader end count = 440077
[    1.064741] KPI: Bootloader display count = 105426
[    1.064909] KPI: Bootloader load kernel count = 2472
[    1.065002] KPI: Kernel MPM timestamp = 484284
[    1.065169] KPI: Kernel MPM Clock frequency = 32768
[    1.065279] socinfo_print: v0.8, id=239, ver=1.0, raw_id=2315, raw_ver=0, hw_plat=8, hw_plat_ver=65536
[    1.065279]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65547, pmic_die_revision=131072
[    1.066855] spk_vreg: no parameters
[    1.067994] vgaarb: loaded
[    1.069474] SCSI subsystem initialized
[    1.071525] usbcore: registered new interface driver usbfs
[    1.071768] usbcore: registered new interface driver hub
[    1.072103] usbcore: registered new device driver usb
[    1.072643] media: Linux media interface: v0.10
[    1.072820] Linux video capture interface: v2.00
[    1.073241] BATTERY: batterydata_init: Battery-data device created!
[    1.075314] msm-cpufreq: probe of soc:qcom,msm-cpufreq failed with error -2
[    1.076989] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0
[    1.077724] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
[    1.078329] platform soc:qcom,ion:qcom,ion-heap@28: assigned reserved memory node audio_region@0
[    1.078984] platform soc:qcom,ion:qcom,ion-heap@23: assigned reserved memory node peripheral_region@0
[    1.079626] platform soc:qcom,ion:qcom,ion-heap@26: assigned reserved memory node modem_adsp_region@0
[    1.080442] ION heap system created
[    1.080802] ion_heap_create: Heap type is disabled: 1
[    1.080977] msm_ion_heap_create: error creating heap kmalloc type 1 base 0x0000000000000000 size 0
[    1.081079] ION heap mm created at 0x00000000f9000000 with size 7000000
[    1.081270] ION heap qsecom created at 0x00000000f8000000 with size 1000000
[    1.081458] ION heap audio created at 0x00000000f7c00000 with size 400000
[    1.081573] ION heap pil_1 created at 0x000000008bd00000 with size 600000
[    1.081760] ION heap pil_2 created at 0x0000000086800000 with size 5500000
[    1.082786] msm_bus_fabric_init_driver
[    1.106872] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'warm' boot
[    1.107063] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[    1.107610] input: qpnp_pon as /devices/virtual/input/input0
[    1.108744] PMIC@SID0: PM8916 v2.0 options: 0, 0, 0, 0
[    1.109503] gdsc_venus: no parameters
[    1.110303] gdsc_mdss: no parameters
[    1.111049] gdsc_jpeg: no parameters
[    1.112176] gdsc_vfe: no parameters
[    1.113036] gdsc_oxili_gx: no parameters
[    1.113759] gdsc_venus_core0: fast normal 
[    1.114482] gdsc_venus_core1: fast normal 
[    1.116249] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[    1.116773] dsi_pll_clock_register_lpm: MSM8916 or MSM8939 detected!
[    1.117664] dsi_pll_clock_register_lpm: Registered DSI PLL:0 clocks successfully
[    1.120893] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffffff8001560000, with 2 ctx banks
[    1.122663] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001c80000, with 20 ctx banks
[    1.134756] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
[    1.135239] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
[    1.135749] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
[    1.136243] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
[    1.136704] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
[    1.137277] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
[    1.137792] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
[    1.138199] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
[    1.138686] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
[    1.139111] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
[    1.139589] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
[    1.140099] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
[    1.140508] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
[    1.140971] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
[    1.141445] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
[    1.141825] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
[    1.142307] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
[    1.142783] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
[    1.143187] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
[    1.143672] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
[    1.144156] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
[    1.144637] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
[    1.150685] Advanced Linux Sound Architecture Driver Initialized.
[    1.152037] Bluetooth: ffffffc020193cf8
[    1.152202] NET: Registered protocol family 31
[    1.152456] Bluetooth: ffffffc020193cf8
[    1.152560] Bluetooth: ffffffc020193cc8Bluetooth: ffffffc020193c98
[    1.152896] Bluetooth: ffffffc020193cb8[    1.153676] cfg80211: Calling CRDA to update world regulatory domain
[    1.153803] cfg80211: World regulatory domain updated:
[    1.153970] cfg80211:  DFS Master region: unset
[    1.154062] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    1.154319] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    1.154490] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    1.154585] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    1.154756] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    1.154925] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    1.155096] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    1.155192] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    1.155362] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    1.155943] pcie:pcie_init.
[    1.160344] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    1.160522] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    1.160620] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    1.160792] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    1.161089] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1113600. Temp:65
[    1.161186] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1113600. Temp:65
[    1.161355] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1113600. Temp:65
[    1.161525] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1113600. Temp:65
[    1.161700] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
[    1.162178] Switched to clocksource arch_sys_counter
[    1.264850] msm_pm_clk_init: Could not get l2_clk (--2)
[    1.266020] NET: Registered protocol family 2
[    1.267130] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    1.267433] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[    1.268046] TCP: Hash tables configured (established 16384 bind 16384)
[    1.268222] TCP: reno registered
[    1.268406] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[    1.268584] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[    1.269196] NET: Registered protocol family 1
[    1.272658] gcc-mdss-8936 soc:qcom,gcc-mdss@1a98300: Registered GCC MDSS clocks.
[    1.276115] Trying to unpack rootfs image as initramfs...
[    1.410393] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    1.410576] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    1.410753] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    1.410849] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    1.411146] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 800000. Temp:64
[    1.411317] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 800000. Temp:64
[    1.411411] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 800000. Temp:64
[    1.411582] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 800000. Temp:64
[    1.411758] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
[    1.429770] Freeing initrd memory: 2336K (ffffffc002000000 - ffffffc002248000)
[    1.438339] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.438610] Initialise system trusted keyring
[    1.438784] audit: initializing netlink subsys (disabled)
[    1.439062] audit: type=2000 audit(1.429:1): initialized
[    1.442392] vmscan: error setting kswapd cpu affinity mask
[    1.462899] Registering sdcardfs 0.1
[    1.463451] fuse init (API version 7.23)
[    1.464287] msgmni has been set to 3702
[    1.468631] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.468738] io scheduler noop registered
[    1.468913] io scheduler deadline registered
[    1.469550] io scheduler cfq registered (default)
[    1.469652] io scheduler test-iosched registered
[    1.476093] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
[    1.476196] mdss_mdp_probe+0x284/0x14a4->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
[    1.477107] mdss_mdp_irq_clk_register: unable to get clk: tbu_clk
[    1.477286] mdss_mdp_irq_clk_register: unable to get clk: tbu_rt_clk
[    1.477386] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
[    1.478898] mdss_mdp_clk_ctrl: IOMMU attach failed
[    1.478995] No change in context(0==0), skip
[    1.479958] mdss_mdp_pipe_addr_setup: type:0 ftchid:1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
[    1.480130] mdss_mdp_pipe_addr_setup: type:1 ftchid:7 xinid:1 num:3 rect:0 ndx:0x8 prio:1
[    1.480302] mdss_mdp_pipe_addr_setup: type:1 ftchid:8 xinid:5 num:4 rect:0 ndx:0x10 prio:2
[    1.480495] mdss_mdp_pipe_addr_setup: type:2 ftchid:4 xinid:2 num:6 rect:0 ndx:0x40 prio:3
[    1.480679] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
[    1.480983] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
[    1.482154] xlog_status: enable:0, panic:1, dump:2
[    1.482583] mdss_debug_register_dump_range: No xlog range dump found, continue
[    1.483160] mdss_mdp_probe: mdss version = 0x10080000, bootloader display is on, num 1, intf_sel=0x00000100
[    1.491543] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
[    1.493050] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_nt35521_720p_video:1:none panel_name:qcom,mdss_dsi_nt35521_720p_video
[    1.493572] mdss_dsi_find_panel_of_node: invalid pan node "qcom,mdss_dsi_nt35521_720p_video"
[    1.494257]  mdss_dsi_panel: mdss_dsi_panel_init: spec_pdata->vsn_gpio=-2 Invalid
[    1.494369]  mdss_dsi_panel: mdss_dsi_panel_init: spec_pdata->vsp_gpio=-2 Invalid
[    1.494779] do_panel_detect: Setting up for CMD Panel Detection...
[    1.494876] mdss_panel_parse_dt: Panel Name = nt35521 720p video mode dsi panel truly
[    1.495308] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_nt35521_720p_video_truly63" (ffffffc020193228)
[    1.495489] mdss_dsi_parse_dcs_cmds: Cannot find property:  somc,mdss-dsi-early-init-command
[    1.495659] mdss_dsi_parse_dcs_cmds: Cannot find property:  somc,mdss-dsi-init-command
[    1.495855] mdss_dsi_parse_dcs_cmds: Cannot find property:  qcom,mdss-dsi-post-panel-on-command
[    1.495955] mdss_dsi_parse_dcs_cmds: Cannot find property:  qcom,mdss-dsi-timing-switch-command
[    1.496181] mdss_dsi_panel_timing_switch: ndx=0 switching to panel timing "qcom,mdss_dsi_nt35521_720p_video_truly63"
[    1.496416] mdss_panel_parse_dt:4138, Unable to read SoMC Phy regulator settings
[    1.496587] mdss_panel_parse_dt:4155, Unable to read Phy lane configure
[    1.496831] mdss_dsi_parse_dcs_cmds: Cannot find property:  somc,mdss-dsi-pre-uv-command
[    1.497004] mdss_dsi_parse_dcs_cmds: Cannot find property:  somc,mdss-dsi-uv-command
[    1.497208] mdss_dsi_parse_dcs_cmds: Cannot find property:  somc,mdss-dsi-cabc-early-on-command
[    1.497305] mdss_dsi_parse_dcs_cmds: Cannot find property:  somc,mdss-dsi-cabc-on-command
[    1.497477] mdss_dsi_parse_dcs_cmds: Cannot find property:  somc,mdss-dsi-cabc-off-command
[    1.497647] mdss_dsi_parse_dcs_cmds: Cannot find property:  somc,mdss-dsi-cabc-late-off-command
[    1.497876] mdss_dsi_parse_panel_features: ulps feature disabled
[    1.497974] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
[    1.498146] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
[    1.498355] mdss_dsi_parse_panel_features:3240, Disp_en gpio not specified
[    1.498556] mdss_dsi_parse_dcs_cmds: Cannot find property:  qcom,mdss-dsi-post-panel-on-command
[    1.498749] mdss_dsi_panel_init:4603 Continuous splash flag enabled.
[    1.499224] mdss_dsi_parse_ctrl_params:4143 Unable to read qcom,display-id, data=0000000000000000,len=45
[    1.499621] mdss_dsi_parse_gpio_params:4210, disp_dcdc_en gpio gpio not specified
[    1.499832] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=ffffff8000dba780 phy_regulator_size=30
[    1.500003] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8000db6000 ctrl_size=25c phy_base=ffffff8000db8500 phy_size=280
[    1.500771] dsi_panel_device_register: Continuous splash enabled
[    1.501200] mdss_register_panel: adding framebuffer device 1a98000.qcom,mdss_dsi_ctrl0
[    1.660340] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    1.660514] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    1.660613] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    1.660784] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    1.661075] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 400000. Temp:63
[    1.661171] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 400000. Temp:63
[    1.661340] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 400000. Temp:63
[    1.661509] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 400000. Temp:63
[    1.661683] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
[    1.691090] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10030001, PHY rev:0x0
[    1.692285] mdss_dsi_status_init: DSI status check interval:5000
[    1.693105] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
[    1.695411] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
[    1.697418] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
[    1.900089] mdss_dsi_cmd_dma_tx: dma tx done but irq not triggered
[    1.910329] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    1.910501] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    1.910599] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    1.910770] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    2.100081] mdss_dsi_cmd_dma_tx: dma tx done but irq not triggered
[    2.138709] Bytes read: 5 requested:10 mismatch
[    2.139119] cmd_panel_detect: WARNING: Cannot detect panel. Falling back to the default entry!
[    2.139216] mdss_panel_parse_dt: Panel Name = nt35521 720p video mode dsi panel truly
[    2.139652] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_nt35521_720p_video_truly63" (ffffffc020193678)
[    2.139832] mdss_dsi_parse_dcs_cmds: Cannot find property:  somc,mdss-dsi-early-init-command
[    2.140004] mdss_dsi_parse_dcs_cmds: Cannot find property:  somc,mdss-dsi-init-command
[    2.140162] mdss_dsi_parse_dcs_cmds: Cannot find property:  qcom,mdss-dsi-post-panel-on-command
[    2.140342] mdss_dsi_parse_dcs_cmds: Cannot find property:  qcom,mdss-dsi-timing-switch-command
[    2.140570] mdss_dsi_panel_timing_switch: ndx=0 switching to panel timing "qcom,mdss_dsi_nt35521_720p_video_truly63"
[    2.140809] mdss_panel_parse_dt:4138, Unable to read SoMC Phy regulator settings
[    2.140980] mdss_panel_parse_dt:4155, Unable to read Phy lane configure
[    2.141224] mdss_dsi_parse_dcs_cmds: Cannot find property:  somc,mdss-dsi-pre-uv-command
[    2.141395] mdss_dsi_parse_dcs_cmds: Cannot find property:  somc,mdss-dsi-uv-command
[    2.141598] mdss_dsi_parse_dcs_cmds: Cannot find property:  somc,mdss-dsi-cabc-early-on-command
[    2.141695] mdss_dsi_parse_dcs_cmds: Cannot find property:  somc,mdss-dsi-cabc-on-command
[    2.141865] mdss_dsi_parse_dcs_cmds: Cannot find property:  somc,mdss-dsi-cabc-off-command
[    2.142036] mdss_dsi_parse_dcs_cmds: Cannot find property:  somc,mdss-dsi-cabc-late-off-command
[    2.142265] mdss_dsi_parse_panel_features: ulps feature disabled
[    2.142363] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
[    2.142535] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
[    2.142745] mdss_dsi_parse_panel_features:3240, Disp_en gpio not specified
[    2.142947] mdss_dsi_parse_dcs_cmds: Cannot find property:  qcom,mdss-dsi-post-panel-on-command
[    2.156473] panel not properly turned off
[    2.156568] reset panel done
[    2.160324] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    2.160498] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    2.160670] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    2.160765] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    2.310667] mdss_dsi_ctrl 1a98000.qcom,mdss_dsi_ctrl0: mipi_dsi_panel_create_debugfs: create folder 1a98000.qcom,mdss_dsi_ctrl0
[    2.311057] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
[    2.311513] mdss_fb_register: FrameBuffer[1] 1280x720 registered successfully!
[    2.311830] mdss_mdp_splash_parse_dt: splash mem child node is not present
[    2.318876] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
[    2.328862] In memshare_probe, Memshare probe success
[    2.334958] msm_rpm_log_probe: OK
[    2.337902] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
[    2.342409] pil-q6v5-mss 4080000.qcom,mss: Failed to find the pas_id.
[    2.410412] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    2.410595] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    2.410770] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    2.410866] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    2.411460] msm_serial_hs module loaded
[    2.412419] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
[    2.412659] AXI: get_pdata(): Error: Client name not found
[    2.412753] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
[    2.412847] msm_serial_hsl_probe: Bus scaling is disabled
[    2.413231] 78b0000.serial: ttyHSL0 at MMIO 0x78b0000 (irq = 30, base_baud = 460800) is a MSM
[    2.413459] msm_hsl_console_setup: console setup on port #0
[    7.245134] console [ttyHSL0] enabled
[    7.249914] msm_serial_hsl_init: driver initialized
[    7.296654] brd: module loaded
[    7.303969] loop: module loaded
[    7.306716] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x800000
[    7.312587] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
[    7.319172] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
[    7.326421] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
[    7.336166] QSEECOM: qseecom_probe: secure app region addr=0x86000000 size=0x300000
[    7.344976] QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
[    7.354301] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[    7.360243] i2c-core: driver [tabla-i2c-core] using legacy resume method
[    7.367039] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[    7.373861] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[    7.380942] i2c-core: driver [tasha-i2c-core] using legacy suspend method
[    7.387389] i2c-core: driver [tasha-i2c-core] using legacy resume method
[    7.395575] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
[    7.404612] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
[    7.410357] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    7.410364] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    7.410371] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    7.410376] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    7.440931] qce 720000.qcedev: CE device = 0x0
[    7.440931] , IO base, CE = 0xffffff8001bc0000
[    7.440931] , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
[    7.440931] IO base BAM = 0x          (null)
[    7.440931] BAM IRQ 26
[    7.440931] Engines Availability = 0x2010853
[    7.466915] sps:BAM 0x0000000000704000 is registered.
[    7.471692] sps:BAM 0x0000000000704000 (va:0xffffff8001f00000) enabled: ver:0x25, number of pipes:8
[    7.480884] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000704000 irq 26
[    7.492264] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
[    7.502267] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
[    7.508718] qcrypto 720000.qcrypto: CE device = 0x0
[    7.508718] , IO base, CE = 0xffffff8001f40000
[    7.508718] , Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
[    7.508718] IO base BAM = 0x          (null)
[    7.508718] BAM IRQ 26
[    7.508718] Engines Availability = 0x2010853
[    7.535684] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000704000 irq 26
[    7.545200] qcrypto 720000.qcrypto: qcrypto-ecb-aes
[    7.549379] qcrypto 720000.qcrypto: qcrypto-cbc-aes
[    7.554182] qcrypto 720000.qcrypto: qcrypto-ctr-aes
[    7.559076] qcrypto 720000.qcrypto: qcrypto-ecb-des
[    7.563890] qcrypto 720000.qcrypto: qcrypto-cbc-des
[    7.568796] qcrypto 720000.qcrypto: qcrypto-ecb-3des
[    7.573701] qcrypto 720000.qcrypto: qcrypto-cbc-3des
[    7.578619] qcrypto 720000.qcrypto: qcrypto-xts-aes
[    7.583588] qcrypto 720000.qcrypto: qcrypto-sha1
[    7.588077] qcrypto 720000.qcrypto: qcrypto-sha256
[    7.592963] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[    7.599030] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[    7.605283] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[    7.611460] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[    7.617840] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[    7.624126] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[    7.630631] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
[    7.635560] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
[    7.640792] qcrypto 720000.qcrypto: qcrypto-aes-ccm
[    7.645628] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
[    7.654281] SCSI Media Changer driver v0.25 
[    7.660344] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    7.660659] tun: Universal TUN/TAP device driver, 1.6
[    7.660663] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    7.667027] PPP generic driver version 2.4.2
[    7.667240] PPP BSD Compression module registered
[    7.667252] PPP Deflate Compression module registered
[    7.667277] NET: Registered protocol family 24
[    7.667822] scm_call failed: func id 0x2000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
[    7.667829] hyp_assign_table: Failed to assign memory protection, ret = -5
[    7.667839] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x0000000086700000 size=1441792 err=-5
[    7.668249] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[    7.668453] msm_sharedmem: sharedmem_register_qmi: qmi init successful
[    7.668576] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
[    7.668866] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
[    7.670295] msm_otg 78d9000.usb: msm_otg probe
[    7.674868] msm_otg 78d9000.usb: OTG regs = ffffff8001218000
[    7.679990] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.680072] ehci-pci: EHCI PCI platform driver
[    7.680159] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[    7.681190] usbcore: registered new interface driver cdc_acm
[    7.681194] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    7.681269] usbcore: registered new interface driver usb-storage
[    7.681330] usbcore: registered new interface driver ums-alauda
[    7.681392] usbcore: registered new interface driver ums-cypress
[    7.681452] usbcore: registered new interface driver ums-datafab
[    7.681517] usbcore: registered new interface driver ums-freecom
[    7.681582] usbcore: registered new interface driver ums-isd200
[    7.681644] usbcore: registered new interface driver ums-jumpshot
[    7.681704] usbcore: registered new interface driver ums-karma
[    7.681764] usbcore: registered new interface driver ums-sddr09
[    7.681825] usbcore: registered new interface driver ums-sddr55
[    7.681885] usbcore: registered new interface driver ums-usbat
[    7.682113] usbcore: registered new interface driver usbserial
[    7.682195] usbcore: registered new interface driver usb_ehset_test
[    7.683601] gbridge_init: gbridge_init successs.
[    7.685456] mousedev: PS/2 mouse device common for all mice
[    7.685885] msm_otg 78d9000.usb: phy_reset: success
[    7.686129] cyttsp4_core_init: Cypress TTSP v4 core driver (Built 20130612) rc=0
[    7.687285] cyttsp4_i2c_adapter 5-0024: cyttsp4_i2c_probe: Starting cyttsp4_i2c_adapter probe...
[    7.688041] cyttsp4_devtree_register_devices: set Pin-Control done
[    7.688956] 5-0024 supply vdd_l27 not found, using dummy regulator
[    7.689048] cyttsp4_i2c_probe: regulator_set_voltage vreg_l27 falied!
[    7.689243] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_core_probe: startup
[    7.689254] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_core_probe: Init HW
[    7.689309] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_init: INIT CYTTSP RST gpio=12 and IRQ gpio=13 r=0
[    7.689316] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_core_probe: Detect HW
[    7.790082] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_xres: RESET CYTTSP gpio=12 r=0
[    7.900712] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0xb (ok)
[    7.970624] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    7.978850] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    7.985646] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    8.010091] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_xres: RESET CYTTSP gpio=12 r=0
[    8.240328] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    8.246251] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    8.254603] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    8.261450] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    8.510316] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    8.516312] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    8.524586] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    8.531360] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    8.539103] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_si_get_test_data: SCANNING is ENABLED codel=1E
[    8.547831] sps: BAM device 0x0000000007884000 is not registered yet.
[    8.548428] sps:BAM 0x0000000007884000 is registered.
[    8.548715] sps:BAM 0x0000000007884000 (va:0xffffff8001fc0000) enabled: ver:0x18, number of pipes:16
[    8.574146] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_irq: cyttsp4_CaT_IRQ=24 00 C3
[    8.587440] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_irq: cyttsp4_CaT_IRQ=A4 00 43
[    8.628784] cyttsp4_core main_ttsp_core.cyttsp4_i2c_adapter: cyttsp4_startup_: cyttsp4_exit startup r=0...
[    8.638075] cyttsp4_i2c_adapter 5-0024: cyttsp4_i2c_probe: Successful probe cyttsp4_i2c_adapter
[    8.646350] cyttsp4_i2c_init: Cypress TTSP I2C Touchscreen Driver (Built 20130612) rc=0
[    8.654370] cyttsp4_mt cyttsp4_mt.main_ttsp_core: cyttsp4_mt_probe
[    8.660699] input: cyttsp4_mt as /devices/soc/78b9000.i2c/i2c-5/5-0024/main_ttsp_core.cyttsp4_i2c_adapter/cyttsp4_mt.main_ttsp_core/input/input1
[    8.673700] cyttsp4_mt_init: Cypress TTSP MT v4 multi-touch (Built 20130612), rc=0
[    8.682048] cyttsp5_i2c_adapter 5-0034: cyttsp5_i2c_probe: Starting cyttsp5_i2c_adapter probe...
[    8.689964] ITUCH : Load default power source
[    8.695242] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:1 tx:0) mode:FIFO slv_addr:0x34 MSTR_STS:0x011363c8 OPER:0x00000010
[    8.710221] cyttsp5_ping_hw: Read unsuccessful, try=1
[    8.820239] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:1 tx:0) mode:FIFO slv_addr:0x34 MSTR_STS:0x011363c8 OPER:0x00000010
[    8.820324] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    8.820329] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    8.820338] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    8.820344] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    8.865267] cyttsp5_ping_hw: Read unsuccessful, try=2
[    8.980237] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:1 tx:0) mode:FIFO slv_addr:0x34 MSTR_STS:0x011363c8 OPER:0x00000010
[    8.995134] cyttsp5_ping_hw: Read unsuccessful, try=3
[    9.070313] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    9.076233] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    9.084580] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    9.091432] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    9.110076] cyttsp5_i2c_adapter 5-0034: cyttsp5_i2c_probe: No HW detected
[    9.116005] cyttsp5_i2c_adapter: probe of 5-0034 failed with error -107
[    9.124838] input: hbtp_vm as /devices/virtual/input/input2
[    9.130655] qcom,qpnp-rtc qpnp-rtc-4: rtc core: registered qpnp_rtc as rtc0
[    9.137051] i2c /dev entries driver
[    9.143801] msm_vidc:  err: Failed to read firmware name: -22
[    9.148593] msm_vidc:  err: Failed to get platform resources
[    9.154344] msm_vidc:  err: Failed to init core
[    9.158768] msm_vidc_v4l2: probe of 1d00000.qcom,vidc failed with error -22
[    9.166778] usbcore: registered new interface driver uvcvideo
[    9.171599] USB Video Class driver (1.1.1)
[    9.175734] gspca_main: v2.14.0 registered
[    9.182169] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0xc (ok)
[    9.190499] SMB:smb_parse_batt_id: vadc not found - defer rc=-517
[    9.195642] smb1360-chg-fg 4-0014: Unable to parse DT nodes
[    9.210530] BMS: bms_get_adc: vadc not found - defer probe rc=-517
[    9.215756] BMS: qpnp_vm_bms_probe: Failed to get adc rc=-517
[    9.221935] CHG: qpnp_lbc_main_probe: Failed to read DT properties rc=-517
[    9.229299] scm_call failed: func id 0x82000109, arginfo: 0x2, args: 0x1, 0x0, 0x0, 0x0, ret: -2, syscall returns: 0xfffffffc, 0x0, 0x0
[    9.240628] Failed to disable secure wdog debug: -22
[    9.270476] device-mapper: uevent: version 1.0.3
[    9.274634] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email protected]
[    9.282886] device-mapper: req-crypt: dm-req-crypt successfully initalized.
[    9.282886] 
[    9.292795] sdhci: Secure Digital Host Controller Interface driver
[    9.298094] sdhci: Copyright(c) Pierre Ossman
[    9.302400] sdhci-pltfm: SDHCI platform and OF driver helper
[    9.309863] sdhci_msm 7824900.sdhci: sdhci_msm_probe: ICE device is not enabled
[    9.316393] ## mmc0: gpio_is_valid(pdata->uim2_gpio)=-2: failure
[    9.323445] sdhci_msm 7824900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for cpu group will be disabled
[    9.336208] ## mmc0: can't set uim2_gpio: -2
[    9.340237] sdhci_msm 7824900.sdhci: No vmmc regulator found
[    9.340343] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    9.340350] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    9.340358] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    9.340363] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    9.375471] sdhci_msm 7824900.sdhci: No vqmmc regulator found
[    9.381784] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA in legacy mode
[    9.422340] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
[    9.429011] ## mmc1: gpio_is_valid(pdata->uim2_gpio)=-2: failure
[    9.436908] sdhci_msm 7864900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for cpu group will be disabled
[    9.461090] ## mmc1: can't set uim2_gpio: -2
[    9.465097] sdhci_msm 7864900.sdhci: No vmmc regulator found
[    9.470082] sdhci_msm 7864900.sdhci: No vqmmc regulator found
[    9.476524] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA in legacy mode
[    9.501754] mmc0: Out-of-interrupt timeout is 100[ms]
[    9.505851] mmc0: BKOPS_EN equals 0x1
[    9.509496] mmc0: eMMC FW version: 0x03
[    9.513420] mmc0: cache barrier support 0 flush policy 0
[    9.518965] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0xf (ok)
[    9.545115] lp5562 0-0030: internal clock used
[    9.546905] mmc0: new HS200 MMC card at address 0001
[    9.548804] mmcblk0: mmc0:0001 H8G1e 7.28 GiB 
[    9.549059] mmcblk0rpmb: mmc0:0001 H8G1e partition 3 4.00 MiB
[    9.566611] tz_log 8600720.tz-log: Hyp log service is not supported
[    9.572677]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30
[    9.575350] usbcore: registered new interface driver usbhid
[    9.575353] usbhid: USB HID core driver
[    9.576075] ashmem: initialized
[    9.576319] logger: created 256K log 'log_main'
[    9.576539] logger: created 256K log 'log_events'
[    9.576764] logger: created 256K log 'log_radio'
[    9.576987] logger: created 256K log 'log_system'
[    9.590368] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    9.590376] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    9.590385] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    9.590390] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    9.596054] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
[    9.596452] bimc-bwmon 410000.qcom,gpu-bwmon: BW HWmon governor registered.
[    9.601840] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
[    9.602269] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
[    9.603339] devfreq-simple-dev: probe of soc:qcom,cci failed with error -2
[    9.604801] usbcore: registered new interface driver snd-usb-audio
[    9.633739] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
[    9.647984] u32 classifier
[    9.647988]     Actions configured
[    9.648056] Netfilter messages via NETLINK v0.30.
[    9.648180] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    9.649028] ctnetlink v0.93: registering with nfnetlink.
[    9.650864] xt_time: kernel timezone is -0000
[    9.651357] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.651716] arp_tables: (C) 2002 David S. Miller
[    9.651813] TCP: cubic registered
[    9.651823] Initializing XFRM netlink socket
[    9.652109] devfreq soc:qcom,gpubw: Couldn't update frequency transition information.
[    9.653194] NET: Registered protocol family 10
[    9.654821] mip6: Mobile IPv6
[    9.654872] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.655213] sit: IPv6 over IPv4 tunneling driver
[    9.656282] NET: Registered protocol family 17
[    9.656385] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    9.656430] Bridge firewalling registered
[    9.656445] Ebtables v2.0 registered
[    9.656774] Bluetooth: ffffffc020193cb8
[    9.656812] Bluetooth: ffffffc020193ca8
[    9.656844] Bluetooth: ffffffc020193ce8
[    9.656847] Bluetooth: ffffffc020193cc8
[    9.656865] Bluetooth: ffffffc020193cc8
[    9.656877] Bluetooth: ffffffc020193c98
[    9.656892] Bluetooth: ffffffc020193d18
[    9.656950] Bluetooth: ffffffc020193ce8
[    9.656951] l2tp_core: L2TP core driver, V2.0
[    9.656962] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    9.657005] l2tp_netlink: L2TP netlink interface
[    9.657089] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    9.657175] l2tp_debugfs: L2TP debugfs support
[    9.657187] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    9.658803] NET: Registered protocol family 27
[    9.661847] IPC_RTR: pil_vote_load_worker: Failed to load modem
[    9.662178] IPC_RTR: pil_vote_load_worker: Failed to load modem
[    9.662211] IPC_RTR: pil_vote_load_worker: Failed to load modem
[    9.662223] IPC_RTR: pil_vote_load_worker: Failed to load modem
[    9.662236] IPC_RTR: pil_vote_load_worker: Failed to load modem
[    9.662251] IPC_RTR: pil_vote_load_worker: Failed to load modem
[    9.662341] IPC_RTR: pil_vote_load_worker: Failed to load modem
[    9.662354] IPC_RTR: pil_vote_load_worker: Failed to load modem
[    9.662360] IPC_RTR: pil_vote_load_worker: Failed to load modem
[    9.662366] IPC_RTR: pil_vote_load_worker: Failed to load modem
[    9.662372] IPC_RTR: pil_vote_load_worker: Failed to load modem
[    9.662378] IPC_RTR: pil_vote_load_worker: Failed to load modem
[    9.668745] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
[    9.682615] pil-q6v5-mss 4080000.qcom,mss: Failed to find the pas_id.
[    9.685564] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
[    9.722674] SMB:smb1360_enable_wd: enable watchdog = 0
[    9.735920] SMB:smb1360_get_wd_status: WD_CFG_REG = 0x08
[    9.840341] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    9.840348] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    9.840357] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    9.840362] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
[    9.909268] SMB:smb1360_hw_init: smb1360_hw_init: Enable FG sleep allowed mode
[    9.934816] SMB:reset_hw_safety_timer: reset hw safety timer
[    9.974828] smb1360_otg_vreg: no parameters
[   10.013331] SMB:brain_work: Cap=94, 94, VBAT=4215, IBAT=92, T=320, USB=1, Type=0 BMD=1, Full=0,0 Delta=0
[   10.022033] SMB:brain_work: vdd_max=4350, rechg=200, input_ma=500, input_type=0, fast_chg=600 time=0, main=0, en=1
[   10.032001] SMB:config_safety_time: safety_time=192, reg=0
[   10.032002] SMB:smb1360_read_reg: the value of reg:00A is 2
[   10.032521] smb1360-chg-fg 4-0014: SMB1360 revision=0x3 probe success! batt=1 usb=1 soc=94
[   10.032928] BMS: qpnp_vm_bms_probe: VMBMS disabled (disable-bms = 1)
[   10.033305] CHG: qpnp_lbc_main_probe: Disabling Linear Charger (e-external-charger = 1)
[   10.043302] Registered cp15_barrier emulation handler
[   10.043338] Registered setend emulation handler
[   10.044412] Loading compiled-in X.509 certificates
[   10.057709] file system registered
[   10.057843] mbim_init: initialize 1 instances
[   10.057983] mbim_init: Initialized 1 ports
[   10.061614] rndis_qc_init: initialize rndis QC instance
[   10.062194] Number of LUNs=8