How I have installed Orb.
root@rt-mro:~# wget -qO- https://pkgs.orb.net/install.sh | sh
Installing Orb for openwrt 24, using method opkg
Found opkg config at /etc/opkg/customfeeds.conf
Found opkg keys directory at /etc/opkg/keys
ArchLinux: https://archlinux.org/ Main documentaion: https://docs.portainer.io/start/install-ce
Instead of creating Docker volume, just use mount:
# One time setup
docker volume create portainer_data
Install necessary packages
opkg update
opkg install luci-proto-wireguard
Generate keys on each peer. I use https://github.com/warner/wireguard-vanity-address to have some nice prefix
opkg update opkg install umdns
mkdir /etc/umdns
SSH advertisemnt comes from dropbear. Add following to afvertise LUCI:
ubus call umdns update ubus call umdns browse
I prefer to run UniFi controller in my DMZ network zone, instead of doing Docker port forward. So I just created VLAN aware Docker network.
docker network create --driver=ipvlan --subnet=192.168.17.0/24 --gateway=192.168.17.1 --ip-range=192.168.17.64/28 -o parent=enp1s0 ipvlan17
Updates to /etc/config/network
should include the following:
# on the eth1 interface that is wired to ONT, we want to enable baby jumbo frame
# this will allow pppoe client to set MTU of 1500 matching ethernet MTU on lan interface
config device
option name 'eth1'
option mtu '1508'
I hereby claim:
To claim this, I am signing this object:
# Prerequisites: docker installed and operational. | |
# Get latest image for node software. | |
docker pull storjlabs/storagenode:latest | |
# Create reasonable place for node storage and identity | |
mkdir -p /srv/storj/identity | |
mkdir -p /srv/storj/storage | |
docker run --rm -e SETUP="true" \ |