Created
January 28, 2016 20:38
-
-
Save bbhoss/f7ab8a74fce31e2fc9c3 to your computer and use it in GitHub Desktop.
Nerves booting on an Intel Edison
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
****************************** | |
PSH KERNEL VERSION: b0182b2b | |
WR: 20104000 | |
****************************** | |
SCU IPC: 0x800000d0 0xfffce92c | |
PSH miaHOB version: TNG.B0.VVBD.0000000c | |
microkernel built 11:24:08 Feb 5 2015 | |
******* PSH loader ******* | |
PCM page cache size = 192 KB | |
Cache Constraint = 0 Pages | |
Arming IPC driver .. | |
Adding page store pool .. | |
PagestoreAddr(IMR Start Address) = 0x04899000 | |
pageStoreSize(IMR Size) = 0x00080000 | |
*** Ready to receive application *** | |
U-Boot 2014.04 (Jun 19 2015 - 12:05:55) | |
Watchdog enabled | |
DRAM: 980.6 MiB | |
MMC: tangier_sdhci: 0 | |
In: serial | |
Out: serial | |
Err: serial | |
Hit any key to stop autoboot: 0 | |
Target:blank | |
Partitioning already done... | |
Flashing already done... | |
GADGET DRIVER: usb_dnl_dfu | |
reading thug | |
6558208 bytes read in 158 ms (39.6 MiB/s) | |
Valid Boot Flag | |
Setup Size = 0x00003c00 | |
Magic signature found | |
Using boot protocol version 2.0d | |
Linux kernel version 4.5.0-rc1-next-20160127 (root@osboxes) #1 SMP Thu Jan 28 20:19:32 GMT 2016 | |
Building boot_params at 0x00090000 | |
Loading bzImage at address 00100000 (6542848 bytes) | |
Magic signature found | |
Kernel command line: "root=/dev/mmcblk0p9 rootwait rootfstype=ext2 console=tty1 console=ttyS2,115200n8 console=ttyMFD2 earlyprintk=ttyS2,keep ignore_loglevel debug systemd.unit=multi-user.target hardware_id=00 g_multi.iSerialNumber=de31d4af3de39bb3d01cf260418921c1 g_multi.dev_addr=02:00:86:89:21:c1" | |
Starting kernel ... | |
[ 0.000000] Linux version 4.5.0-rc1-next-20160127 (root@osboxes) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0) ) #1 SMP Thu Jan 28 20:19:32 GMT 2016 | |
[ 0.000000] x86/fpu: Legacy x87 FPU detected. | |
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches. | |
[ 0.000000] e820: BIOS-provided physical RAM map: | |
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000097fff] usable | |
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable | |
[ 0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000005ffffff] reserved | |
[ 0.000000] BIOS-e820: [mem 0x0000000006000000-0x000000003f4fffff] usable | |
[ 0.000000] BIOS-e820: [mem 0x000000003f500000-0x000000003fffffff] reserved | |
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved | |
[ 0.000000] BIOS-e820: [mem 0x00000000fec04000-0x00000000fec07fff] reserved | |
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved | |
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved | |
[ 0.000000] console [earlyser0] enabled | |
[ 0.000000] debug: ignoring loglevel setting. | |
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! | |
[ 0.000000] SMBIOS 2.6 present. | |
[ 0.000000] DMI: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 | |
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved | |
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable | |
[ 0.000000] e820: last_pfn = 0x3f500 max_arch_pfn = 0x100000 | |
[ 0.000000] MTRR default type: uncachable | |
[ 0.000000] MTRR fixed ranges enabled: | |
[ 0.000000] 00000-9FFFF write-back | |
[ 0.000000] A0000-BFFFF uncachable | |
[ 0.000000] C0000-FFFFF write-back | |
[ 0.000000] MTRR variable ranges enabled: | |
[ 0.000000] 0 base 000000000 mask FC0000000 write-back | |
[ 0.000000] 1 base 03F600000 mask FFFE00000 uncachable | |
[ 0.000000] 2 base 03F800000 mask FFF800000 uncachable | |
[ 0.000000] 3 base 004000000 mask FFE000000 uncachable | |
[ 0.000000] 4 disabled | |
[ 0.000000] 5 disabled | |
[ 0.000000] 6 disabled | |
[ 0.000000] 7 disabled | |
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT | |
[ 0.000000] e820: update [mem 0x04000000-0x05ffffff] usable ==> reserved | |
[ 0.000000] Scanning 1 areas for low memory corruption | |
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] | |
[ 0.000000] Base memory trampoline at [c0094000] 94000 size 16384 | |
[ 0.000000] BRK [0x01d09000, 0x01d09fff] PGTABLE | |
[ 0.000000] ACPI: Early table checksum verification disabled | |
[ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20160108/tbxfroot-243) | |
[ 0.000000] 125MB HIGHMEM available. | |
[ 0.000000] 887MB LOWMEM available. | |
[ 0.000000] mapped low ram: 0 - 377fe000 | |
[ 0.000000] low ram: 0 - 377fe000 | |
[ 0.000000] BRK [0x01d0a000, 0x01d0afff] PGTABLE | |
[ 0.000000] Zone ranges: | |
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] | |
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff] | |
[ 0.000000] HighMem [mem 0x00000000377fe000-0x000000003f4fffff] | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000097fff] | |
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000003ffffff] | |
[ 0.000000] node 0: [mem 0x0000000006000000-0x000000003f4fffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003f4fffff] | |
[ 0.000000] On node 0 totalpages: 251031 | |
[ 0.000000] free_area_init_node: node 0, pgdat c1ba44c0, node_mem_map f700e020 | |
[ 0.000000] DMA zone: 32 pages used for memmap | |
[ 0.000000] DMA zone: 0 pages reserved | |
[ 0.000000] DMA zone: 3991 pages, LIFO batch:0 | |
[ 0.000000] Normal zone: 1744 pages used for memmap | |
[ 0.000000] Normal zone: 215038 pages, LIFO batch:31 | |
[ 0.000000] HighMem zone: 32002 pages, LIFO batch:7 | |
[ 0.000000] Using APIC driver default | |
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org | |
[ 0.000000] SFI: SYST E31F0, 0060 (v1 INTEL INTELFDK) | |
[ 0.000000] SFI: CPUS E3296, 0020 (v1 INTEL INTELFDK) | |
[ 0.000000] SFI: FREQ E32C2, 0030 (v1 INTEL INTELFDK) | |
[ 0.000000] SFI: MMAP E32FE, 01A4 (v1 INTEL INTELFDK) | |
[ 0.000000] SFI: XSDT E34B0, 002C (v1 INTEL INTELFDK) | |
[ 0.000000] SFI: APIC E353E, 0020 (v1 INTEL INTELFDK) | |
[ 0.000000] SFI: WAKE E356A, 0020 (v2 INTEL INTELFDK) | |
[ 0.000000] SFI: DEVS E359E, 047D (v1 INTEL INTELFDK) | |
[ 0.000000] SFI: GPIO E3A27, 0964 (v1 INTEL INTELFDK) | |
[ 0.000000] SFI: OEMB E4397, 0060 (v5 UMGFDK CFGINFO!) | |
[ 0.000000] SFI: registering lapic[0] | |
[ 0.000000] SFI: registering lapic[2] | |
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-54 | |
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs | |
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x000fffff] | |
[ 0.000000] PM: Registered nosave memory: [mem 0x04000000-0x05ffffff] | |
[ 0.000000] e820: [mem 0x40000000-0xfebfffff] available for PCI devices | |
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns | |
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 | |
[ 0.000000] PERCPU: Embedded 19 pages/cpu @f6fe2000 s46732 r0 d31092 u77824 | |
[ 0.000000] pcpu-alloc: s46732 r0 d31092 u77824 alloc=19*4096 | |
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 | |
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 249255 | |
[ 0.000000] Kernel command line: root=/dev/mmcblk0p9 rootwait rootfstype=ext2 console=tty1 console=ttyS2,115200n8 console=ttyMFD2 earlyprintk=ttyS2,keep ignore_loglevel debug systemd.unit=multi-user.target hardware_id=00 g_multi.iSerialNumber=de31d4af3de39bb3d01cf260418921c1 g_multi.dev_addr=02:00:86:89:21:c1 | |
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) | |
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
[ 0.000000] Initializing CPU#0 | |
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f500) | |
[ 0.000000] Initializing Movable for node 0 (00000000:00000000) | |
[ 0.000000] Memory: 981588K/1004124K available (8946K kernel code, 752K rwdata, 2336K rodata, 620K init, 612K bss, 22536K reserved, 0K cma-reserved, 128008K highmem) | |
[ 0.000000] virtual kernel memory layout: | |
[ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) | |
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) | |
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) | |
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) | |
[ 0.000000] .init : 0xc1bc4000 - 0xc1c5f000 ( 620 kB) | |
[ 0.000000] .data : 0xc18bccde - 0xc1bc2340 (3093 kB) | |
[ 0.000000] .text : 0xc1000000 - 0xc18bccde (8947 kB) | |
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
[ 0.000000] Hierarchical RCU implementation. | |
[ 0.000000] Build-time adjustment of leaf fanout to 32. | |
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. | |
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 | |
[ 0.000000] NR_IRQS:2304 nr_irqs:512 0 | |
[ 0.000000] CPU 0 irqstacks, hard=f6824000 soft=f6826000 | |
[ 0.000000] Console: colour dummy device 80x25 | |
[ 0.000000] console [tty1] enabled | |
[ 0.000000] console [ttyS2] enabled | |
[ 0.000000] tsc: Detected 499.200 MHz processor | |
[ 0.000095] Calibrating delay loop (skipped), value calculated using timer frequency.. 998.40 BogoMIPS (lpj=499200) | |
[ 0.000636] pid_max: default: 32768 minimum: 301 | |
[ 0.000969] Security Framework initialized | |
[ 0.001194] SELinux: Initializing. | |
[ 0.001413] SELinux: Starting in permissive mode | |
[ 0.001694] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.002038] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.003317] CPU: Physical Processor ID: 0 | |
[ 0.003539] CPU: Processor Core ID: 0 | |
[ 0.003745] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' | |
[ 0.004052] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) | |
[ 0.004419] mce: CPU supports 6 MCE banks | |
[ 0.004653] CPU0: Thermal monitoring enabled (TM1) | |
[ 0.004908] process: using mwait in idle threads | |
[ 0.005164] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 | |
[ 0.005445] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 | |
[ 0.006563] Freeing SMP alternatives memory: 32K (c1c5f000 - c1c67000) | |
[ 0.006913] SFI: MCFG E34F6, 003C (v1 INTEL INTELFDK) | |
[ 0.007467] Enabling APIC mode: Flat. Using 1 I/O APICs | |
[ 0.007786] TSC deadline timer enabled | |
[ 0.007994] smpboot: CPU0: Genuine Intel(R) CPU 4000 @ 500MHz (family: 0x6, model: 0x4a, stepping: 0x8) | |
[ 0.008603] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver. | |
[ 0.009208] ... version: 3 | |
[ 0.009423] ... bit width: 40 | |
[ 0.009639] ... generic registers: 2 | |
[ 0.009852] ... value mask: 000000ffffffffff | |
[ 0.010151] ... max period: 000000ffffffffff | |
[ 0.010426] ... fixed-purpose events: 3 | |
[ 0.010640] ... event mask: 0000000700000003 | |
[ 0.013128] CPU 1 irqstacks, hard=f68e2000 soft=f68e4000 | |
[ 0.013441] x86: Booting SMP configuration: | |
[ 0.013671] .... node #0, CPUs: #1 | |
[ 0.014135] Initializing CPU#1 | |
[ 0.014354] Skipped synchronization checks as TSC is reliable. | |
[ 0.014844] x86: Booted up 1 node, 2 CPUs | |
[ 0.015071] smpboot: Total of 2 processors activated (1996.80 BogoMIPS) | |
[ 0.016714] devtmpfs: initialized | |
[ 0.020839] kworker/u4:0 (17) used greatest stack depth: 7428 bytes left | |
[ 0.020898] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns | |
[ 0.021345] SFI: SFI sysfs interfaces init success | |
[ 0.021420] RTC time: 20:36:46, date: 01/28/16 | |
[ 0.022388] NET: Registered protocol family 16 | |
[ 0.029854] cpuidle: using governor menu | |
[ 0.032099] kworker/u4:0 (29) used greatest stack depth: 7320 bytes left | |
[ 0.032220] PCI: MMCONFIG for domain 0000 [bus 00-00] at [mem 0x3f500000-0x3f5fffff] (base 0x3f500000) | |
[ 0.032231] PCI: MMCONFIG at [mem 0x3f500000-0x3f5fffff] reserved in E820 | |
[ 0.032234] PCI: Using MMCONFIG for extended config space | |
[ 0.032240] PCI: Using configuration type 1 for base access | |
[ 0.036284] kworker/u4:1 (33) used greatest stack depth: 7284 bytes left | |
[ 0.039577] kworker/u4:0 (42) used greatest stack depth: 7084 bytes left | |
[ 0.040260] kworker/u4:0 (34) used greatest stack depth: 6924 bytes left | |
[ 0.077329] HugeTLB registered 4 MB page size, pre-allocated 0 pages | |
[ 0.078586] ACPI: Interpreter disabled. | |
[ 0.079257] vgaarb: loaded | |
[ 0.080004] SCSI subsystem initialized | |
[ 0.080482] libata version 3.00 loaded. | |
[ 0.081173] usbcore: registered new interface driver usbfs | |
[ 0.081557] usbcore: registered new interface driver hub | |
[ 0.081990] usbcore: registered new device driver usb | |
[ 0.082509] pps_core: LinuxPPS API ver. 1 registered | |
[ 0.082775] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
[ 0.083340] PTP clock support registered | |
[ 0.084670] Advanced Linux Sound Architecture Driver Initialized. | |
[ 0.085166] Intel MID platform detected, using MID PCI ops | |
[ 0.085485] PCI: Probing PCI hardware | |
[ 0.085689] PCI: root bus 00: using default resources | |
[ 0.085955] PCI: Probing PCI hardware (bus 00) | |
[ 0.086396] PCI host bridge to bus 0000:00 | |
[ 0.086663] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] | |
[ 0.086992] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] | |
[ 0.087346] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] | |
[ 0.087817] pci 0000:00:00.0: [8086:1170] type 00 class 0x060000 | |
[ 0.088492] pci 0000:00:01.0: [8086:1190] type 00 class 0x080501 | |
[ 0.088879] pci 0000:00:01.0: reg 0x10: [mem 0xff3fc000-0xff3fc0ff] | |
[ 0.089332] pci 0000:00:01.0: PME# supported from D0 D3hot | |
[ 0.089952] pci 0000:00:01.2: [8086:1190] type 00 class 0x080501 | |
[ 0.090304] pci 0000:00:01.2: reg 0x10: [mem 0xff3fa000-0xff3fa0ff] | |
[ 0.090751] pci 0000:00:01.2: PME# supported from D0 D3hot | |
[ 0.091362] pci 0000:00:01.3: [8086:1190] type 00 class 0x080501 | |
[ 0.091713] pci 0000:00:01.3: reg 0x10: [mem 0xff3fb000-0xff3fb0ff] | |
[ 0.092205] pci 0000:00:01.3: PME# supported from D0 D3hot | |
[ 0.092804] pci 0000:00:02.0: [8086:1182] type 00 class 0x038000 | |
[ 0.093217] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc1ffffff] | |
[ 0.093580] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff] | |
[ 0.093936] pci 0000:00:02.0: reg 0x20: [io 0x7ff8-0x7fff] | |
[ 0.094595] pci 0000:00:04.0: [8086:1191] type 00 class 0x070002 | |
[ 0.094947] pci 0000:00:04.0: reg 0x10: [mem 0xff010000-0xff01007f] | |
[ 0.095421] pci 0000:00:04.0: PME# supported from D0 D3hot | |
[ 0.096000] pci 0000:00:04.1: [8086:1191] type 00 class 0x070002 | |
[ 0.096379] pci 0000:00:04.1: reg 0x10: [mem 0xff010080-0xff0100ff] | |
[ 0.096828] pci 0000:00:04.1: PME# supported from D0 D3hot | |
[ 0.097440] pci 0000:00:04.2: [8086:1191] type 00 class 0x070002 | |
[ 0.097792] pci 0000:00:04.2: reg 0x10: [mem 0xff010100-0xff01017f] | |
[ 0.098237] pci 0000:00:04.2: PME# supported from D0 D3hot | |
[ 0.098852] pci 0000:00:04.3: [8086:1191] type 00 class 0x070002 | |
[ 0.099204] pci 0000:00:04.3: reg 0x10: [mem 0xff010180-0xff0101ff] | |
[ 0.099679] pci 0000:00:04.3: PME# supported from D0 D3hot | |
[ 0.100268] pci 0000:00:05.0: [8086:1192] type 00 class 0x070002 | |
[ 0.100648] pci 0000:00:05.0: reg 0x10: [mem 0xff010400-0xff0107ff] | |
[ 0.101096] pci 0000:00:05.0: PME# supported from D0 D3hot | |
[ 0.101714] pci 0000:00:06.0: [8086:1193] type 00 class 0x088000 | |
[ 0.102065] pci 0000:00:06.0: reg 0x10: [mem 0xff2a0000-0xff2a0fff] | |
[ 0.102509] pci 0000:00:06.0: PME# supported from D0 D3hot | |
[ 0.103126] pci 0000:00:06.1: [8086:1193] type 00 class 0x088000 | |
[ 0.103478] pci 0000:00:06.1: reg 0x10: [mem 0xff2a1000-0xff2a1fff] | |
[ 0.103953] pci 0000:00:06.1: PME# supported from D0 D3hot | |
[ 0.104548] pci 0000:00:07.0: [8086:1194] type 00 class 0x088000 | |
[ 0.104928] pci 0000:00:07.0: reg 0x10: [mem 0xff188000-0xff188fff] | |
[ 0.105375] pci 0000:00:07.0: PME# supported from D0 D3hot | |
[ 0.105991] pci 0000:00:07.1: [8086:1194] type 00 class 0x088000 | |
[ 0.106343] pci 0000:00:07.1: reg 0x10: [mem 0xff189000-0xff189fff] | |
[ 0.106788] pci 0000:00:07.1: PME# supported from D0 D3hot | |
[ 0.107414] pci 0000:00:07.2: [8086:1194] type 00 class 0x088000 | |
[ 0.107765] pci 0000:00:07.2: reg 0x10: [mem 0xff18a000-0xff18afff] | |
[ 0.108239] pci 0000:00:07.2: PME# supported from D0 D3hot | |
[ 0.108835] pci 0000:00:08.0: [8086:1195] type 00 class 0x078000 | |
[ 0.109215] pci 0000:00:08.0: reg 0x10: [mem 0xff18b000-0xff18bfff] | |
[ 0.109662] pci 0000:00:08.0: PME# supported from D0 D3hot | |
[ 0.110278] pci 0000:00:08.1: [8086:1195] type 00 class 0x078000 | |
[ 0.110629] pci 0000:00:08.1: reg 0x10: [mem 0xff18c000-0xff18cfff] | |
[ 0.111074] pci 0000:00:08.1: PME# supported from D0 D3hot | |
[ 0.111692] pci 0000:00:08.2: [8086:1195] type 00 class 0x078000 | |
[ 0.112042] pci 0000:00:08.2: reg 0x10: [mem 0xff18d000-0xff18dfff] | |
[ 0.112517] pci 0000:00:08.2: PME# supported from D0 D3hot | |
[ 0.113102] pci 0000:00:08.3: [8086:1195] type 00 class 0x078000 | |
[ 0.113483] pci 0000:00:08.3: reg 0x10: [mem 0xff18e000-0xff18efff] | |
[ 0.113931] pci 0000:00:08.3: PME# supported from D0 D3hot | |
[ 0.114558] pci 0000:00:09.0: [8086:1196] type 00 class 0x078000 | |
[ 0.114909] pci 0000:00:09.0: reg 0x10: [mem 0xff18f000-0xff18ffff] | |
[ 0.115354] pci 0000:00:09.0: PME# supported from D0 D3hot | |
[ 0.115975] pci 0000:00:09.1: [8086:1196] type 00 class 0x078000 | |
[ 0.116326] pci 0000:00:09.1: reg 0x10: [mem 0xff190000-0xff190fff] | |
[ 0.116800] pci 0000:00:09.1: PME# supported from D0 D3hot | |
[ 0.117387] pci 0000:00:09.2: [8086:1196] type 00 class 0x078000 | |
[ 0.117768] pci 0000:00:09.2: reg 0x10: [mem 0xff191000-0xff191fff] | |
[ 0.118217] pci 0000:00:09.2: PME# supported from D0 D3hot | |
[ 0.118849] pci 0000:00:0a.0: [8086:1197] type 00 class 0x078000 | |
[ 0.119200] pci 0000:00:0a.0: reg 0x10: [mem 0xff3f8000-0xff3f8fff] | |
[ 0.119645] pci 0000:00:0a.0: PME# supported from D0 D3hot | |
[ 0.120271] pci 0000:00:0b.0: [8086:1198] type 00 class 0x108000 | |
[ 0.120622] pci 0000:00:0b.0: reg 0x10: [mem 0xf9038000-0xf903ffff] | |
[ 0.121097] pci 0000:00:0b.0: PME# supported from D0 D3hot | |
[ 0.121700] pci 0000:00:0c.0: [8086:1199] type 00 class 0x088000 | |
[ 0.122080] pci 0000:00:0c.0: reg 0x10: [mem 0xff008000-0xff008fff] | |
[ 0.122426] pci 0000:00:0c.0: reg 0x14: [mem 0x000ddcc0-0x000ddccf] | |
[ 0.122859] pci 0000:00:0c.0: PME# supported from D0 D3hot | |
[ 0.123480] pci 0000:00:0d.0: [8086:119a] type 00 class 0x040100 | |
[ 0.123831] pci 0000:00:0d.0: reg 0x10: [mem 0x05e00000-0x05ffffff] | |
[ 0.124203] pci 0000:00:0d.0: reg 0x14: [mem 0xff340000-0xff343fff] | |
[ 0.124549] pci 0000:00:0d.0: reg 0x18: [mem 0xff344000-0xff344fff] | |
[ 0.124889] pci 0000:00:0d.0: reg 0x1c: [mem 0xff2c0000-0xff2dffff] | |
[ 0.125254] pci 0000:00:0d.0: reg 0x20: [mem 0xff300000-0xff33ffff] | |
[ 0.125657] pci 0000:00:0d.0: PME# supported from D0 D3hot | |
[ 0.126269] pci 0000:00:0e.0: [8086:119b] type 00 class 0x088000 | |
[ 0.126620] pci 0000:00:0e.0: reg 0x10: [mem 0xff298000-0xff29bfff] | |
[ 0.126962] pci 0000:00:0e.0: reg 0x14: [mem 0xff2a2000-0xff2a2fff] | |
[ 0.127421] pci 0000:00:0e.0: PME# supported from D0 D3hot | |
[ 0.128006] pci 0000:00:11.0: [8086:119e] type 00 class 0x0c0320 | |
[ 0.128385] pci 0000:00:11.0: reg 0x10: [mem 0xf9100000-0xf911ffff] | |
[ 0.128833] pci 0000:00:11.0: PME# supported from D0 D3hot | |
[ 0.129445] pci 0000:00:12.0: [8086:119f] type 00 class 0x118000 | |
[ 0.129796] pci 0000:00:12.0: reg 0x10: [mem 0xf9009000-0xf9009fff] | |
[ 0.130138] pci 0000:00:12.0: reg 0x14: [mem 0xf90a0000-0xf90affff] | |
[ 0.130509] pci 0000:00:12.0: reg 0x18: [mem 0xfa000000-0xfaffffff] | |
[ 0.130935] pci 0000:00:12.0: PME# supported from D0 D3hot | |
[ 0.131549] pci 0000:00:13.0: [8086:11a0] type 00 class 0x0b4000 | |
[ 0.131901] pci 0000:00:13.0: reg 0x10: [mem 0xff009000-0xff009fff] | |
[ 0.132346] pci 0000:00:13.0: PME# supported from D0 D3hot | |
[ 0.132957] pci 0000:00:14.0: [8086:11a1] type 00 class 0x0b4000 | |
[ 0.133308] pci 0000:00:14.0: reg 0x10: [mem 0xff00b000-0xff00bfff] | |
[ 0.133782] pci 0000:00:14.0: PME# supported from D0 D3hot | |
[ 0.134378] pci 0000:00:15.0: [8086:11a2] type 00 class 0x088000 | |
[ 0.134758] pci 0000:00:15.0: reg 0x10: [mem 0xff192000-0xff192fff] | |
[ 0.135206] pci 0000:00:15.0: PME# supported from D0 D3hot | |
[ 0.135818] pci 0000:00:16.0: [8086:11a3] type 00 class 0x0b4000 | |
[ 0.136170] pci 0000:00:16.0: reg 0x10: [mem 0xff0d9000-0xff0d90ff] | |
[ 0.136614] pci 0000:00:16.0: PME# supported from D0 D3hot | |
[ 0.137228] pci 0000:00:16.1: [8086:11a4] type 00 class 0x0b4000 | |
[ 0.137579] pci 0000:00:16.1: reg 0x10: [mem 0x04819000-0x04898fff] | |
[ 0.137921] pci 0000:00:16.1: reg 0x14: [mem 0x04919000-0x04920fff] | |
[ 0.138389] pci 0000:00:16.1: PME# supported from D0 D3hot | |
[ 0.139017] pci 0000:00:17.0: [8086:11a5] type 00 class 0x088000 | |
[ 0.139368] pci 0000:00:17.0: reg 0x10: [mem 0xff013000-0xff013fff] | |
[ 0.139813] pci 0000:00:17.0: PME# supported from D0 D3hot | |
[ 0.140427] pci 0000:00:18.0: [8086:11a6] type 00 class 0x038000 | |
[ 0.140888] pci 0000:00:18.0: PME# supported from D0 D3hot | |
[ 0.141514] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 | |
[ 0.141974] PCI: pci_cache_line_size set to 64 bytes | |
[ 0.142428] e820: reserve RAM buffer [mem 0x00098000-0x0009ffff] | |
[ 0.142744] e820: reserve RAM buffer [mem 0x3f500000-0x3fffffff] | |
[ 0.144824] NetLabel: Initializing | |
[ 0.145021] NetLabel: domain hash size = 128 | |
[ 0.145251] NetLabel: protocols = UNLABELED CIPSOv4 | |
[ 0.145661] NetLabel: unlabeled traffic allowed by default | |
[ 0.147790] clocksource: Switched to clocksource refined-jiffies | |
[ 0.194867] VFS: Disk quotas dquot_6.6.0 | |
[ 0.195171] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
[ 0.196182] pnp: PnP ACPI: disabled | |
[ 0.212373] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] | |
[ 0.212684] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] | |
[ 0.213191] NET: Registered protocol family 2 | |
[ 0.214377] TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
[ 0.214836] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
[ 0.215351] TCP: Hash tables configured (established 8192 bind 8192) | |
[ 0.215759] UDP hash table entries: 512 (order: 2, 16384 bytes) | |
[ 0.216100] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
[ 0.216669] NET: Registered protocol family 1 | |
[ 0.217418] RPC: Registered named UNIX socket transport module. | |
[ 0.217791] RPC: Registered udp transport module. | |
[ 0.218045] RPC: Registered tcp transport module. | |
[ 0.218292] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.221129] PCI: CLS 0 bytes, default 64 | |
[ 0.224745] Scanning for low memory corruption every 60 seconds | |
[ 0.226997] futex hash table entries: 512 (order: 2, 16384 bytes) | |
[ 0.227457] audit: initializing netlink subsys (disabled) | |
[ 0.227789] audit: type=2000 audit(1454013406.209:1): initialized | |
[ 0.247722] NFS: Registering the id_resolver key type | |
[ 0.248071] Key type id_resolver registered | |
[ 0.248302] Key type id_legacy registered | |
[ 0.249319] SELinux: Registering netfilter hooks | |
[ 0.256355] bounce: pool size: 64 pages | |
[ 0.256950] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) | |
[ 0.257357] io scheduler noop registered | |
[ 0.257577] io scheduler deadline registered | |
[ 0.258084] io scheduler cfq registered (default) | |
[ 0.260504] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 | |
[ 0.263152] hsu_dma_pci 0000:00:05.0: Found HSU DMA, 12 channels | |
[ 0.263891] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
[ 0.266055] serial: probe of 0000:00:04.0 failed with error -16 | |
[ 0.267034] 8250_mid: probe of 0000:00:04.0 failed with error -16 | |
[ 0.267808] 0000:00:04.1: ttyS0 at MMIO 0xff010080 (irq = 28, base_baud = 1843200) is a TI16750 | |
[ 0.268971] 0000:00:04.2: ttyS1 at MMIO 0xff010100 (irq = 29, base_baud = 1843200) is a TI16750 | |
[ 0.270135] console [ttyS2] disabled | |
[ 0.270391] 0000:00:04.3: ttyS2 at MMIO 0xff010180 (irq = 54, base_baud = 1843200) is a TI16750 | |
[ 2.295488] console [ttyS2] enabled | |
[ 2.300237] Non-volatile memory driver v1.3 | |
[ 2.304829] Linux agpgart interface v0.103 | |
[ 2.309536] [drm] Initialized drm 1.1.0 20060810 | |
[ 2.323885] loop: module loaded | |
[ 2.328709] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI | |
[ 2.335019] e100: Copyright(c) 1999-2006 Intel Corporation | |
[ 2.340840] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI | |
[ 2.348102] e1000: Copyright (c) 1999-2006 Intel Corporation. | |
[ 2.354182] sky2: driver version 1.30 | |
[ 2.560009] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ 2.566914] ehci-pci: EHCI PCI platform driver | |
[ 2.571641] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
[ 2.578031] ohci-pci: OHCI PCI platform driver | |
[ 2.582746] uhci_hcd: USB Universal Host Controller Interface driver | |
[ 2.589662] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
[ 2.595622] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 | |
[ 2.603713] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f06c hci version 0x100 quirks 0x00010010 | |
[ 2.612734] xhci-hcd xhci-hcd.1.auto: irq 34, io mem 0xf9100000 | |
[ 2.619108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
[ 2.626199] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 2.633673] usb usb1: Product: xHCI Host Controller | |
[ 2.638709] usb usb1: Manufacturer: Linux 4.5.0-rc1-next-20160127 xhci-hcd | |
[ 2.645785] usb usb1: SerialNumber: xhci-hcd.1.auto | |
[ 2.651611] hub 1-0:1.0: USB hub found | |
[ 2.655566] hub 1-0:1.0: 1 port detected | |
[ 2.660137] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
[ 2.666102] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 | |
[ 2.674143] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. | |
[ 2.682700] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 | |
[ 2.689714] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 2.697168] usb usb2: Product: xHCI Host Controller | |
[ 2.702199] usb usb2: Manufacturer: Linux 4.5.0-rc1-next-20160127 xhci-hcd | |
[ 2.709277] usb usb2: SerialNumber: xhci-hcd.1.auto | |
[ 2.715085] hub 2-0:1.0: USB hub found | |
[ 2.719022] hub 2-0:1.0: 1 port detected | |
[ 2.723806] usbcore: registered new interface driver usblp | |
[ 2.729660] usbcore: registered new interface driver usb-storage | |
[ 2.736170] mousedev: PS/2 mouse device common for all mice | |
[ 2.743629] intel_mid_wdt intel_mid_wdt: Intel MID watchdog device probed | |
[ 2.751265] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected] | |
[ 2.760124] sdhci: Secure Digital Host Controller Interface driver | |
[ 2.766490] sdhci: Copyright(c) Pierre Ossman | |
[ 2.771082] sdhci-pci 0000:00:01.0: SDHCI controller found [8086:1190] (rev 1) | |
[ 2.784790] mmc0: SDHCI controller on PCI [0000:00:01.0] using ADMA | |
[ 2.792678] sdhci-pci 0000:00:01.2: SDHCI controller found [8086:1190] (rev 1) | |
[ 2.801391] sdhci-pci 0000:00:01.3: SDHCI controller found [8086:1190] (rev 1) | |
[ 2.810351] hidraw: raw HID events driver (C) Jiri Kosina | |
[ 2.817784] usbcore: registered new interface driver usbhid | |
[ 2.823538] usbhid: USB HID core driver | |
[ 2.832014] Netfilter messages via NETLINK v0.30. | |
[ 2.836973] nf_conntrack version 0.5.0 (15337 buckets, 61348 max) | |
[ 2.844262] ctnetlink v0.93: registering with nfnetlink. | |
[ 2.855412] ip_tables: (C) 2000-2006 Netfilter Core Team | |
[ 2.861041] Initializing XFRM netlink socket | |
[ 2.866736] NET: Registered protocol family 10 | |
[ 2.873800] ip6_tables: (C) 2000-2006 Netfilter Core Team | |
[ 2.882018] sit: IPv6 over IPv4 tunneling driver | |
[ 2.887780] NET: Registered protocol family 17 | |
[ 2.892632] Key type dns_resolver registered | |
[ 2.899623] microcode: CPU0 sig=0x406a8, pf=0x1, revision=0x81f | |
[ 2.905874] microcode: CPU1 sig=0x406a8, pf=0x1, revision=0x81f | |
[ 2.912243] microcode: Microcode Update Driver: v2.01 <[email protected]>, Peter Oruba | |
[ 2.921410] Using IPI No-Shortcut mode | |
[ 2.928486] registered taskstats version 1 | |
[ 2.934387] Magic number: 0:776:650 | |
[ 2.938355] console [netcon0] enabled | |
[ 2.942159] netconsole: network logging started | |
[ 2.947215] PM: Hibernation image not present or could not be loaded. | |
[ 2.953885] ALSA device list: | |
[ 2.956969] No soundcards found. | |
[ 2.960910] md: Waiting for all devices to be available before autodetect | |
[ 2.967908] md: If you don't use raid, use raid=noautodetect | |
[ 2.974764] md: Autodetecting RAID arrays. | |
[ 2.979028] md: Scanned 0 and added 0 devices. | |
[ 2.983618] md: autorun ... | |
[ 2.986512] md: ... autorun DONE. | |
[ 2.990018] Waiting for root device /dev/mmcblk0p9... | |
[ 3.029482] mmc0: MAN_BKOPS_EN bit is not set | |
[ 3.043318] mmc0: new DDR MMC card at address 0001 | |
[ 3.048949] mmcblk0: mmc0:0001 H4G1d 3.64 GiB | |
[ 3.054008] mmcblk0boot0: mmc0:0001 H4G1d partition 1 4.00 MiB | |
[ 3.060464] mmcblk0boot1: mmc0:0001 H4G1d partition 2 4.00 MiB | |
[ 3.066912] mmcblk0rpmb: mmc0:0001 H4G1d partition 3 4.00 MiB | |
[ 3.076762] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 | |
[ 3.107883] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xe642f98297, max_idle_ns: 881590439301 ns | |
[ 3.115867] VFS: Mounted root (ext2 filesystem) readonly on device 179:9. | |
[ 3.116575] devtmpfs: mounted | |
[ 3.128632] Freeing unused kernel memory: 620K (c1bc4000 - c1c5f000) | |
[ 3.135319] Write protecting the kernel text: 8948k | |
[ 3.140567] Write protecting the kernel read-only data: 2340k | |
[ 3.146525] clocksource: Switched to clocksource tsc | |
[ 3.211983] epmd (929) used greatest stack depth: 6260 bytes left | |
[ 4.147744] inet_gethost (943) used greatest stack depth: 5872 bytes left | |
Erlang/OTP 18 [erts-7.2.1] [source] [async-threads:10] [kernel-poll:false] | |
The erlang-history file could not be opened, and history will be ignored for the rest of the session. | |
The error received was: {file_error,"/root/.erlang-hist.demo@nerves",erofs} | |
Interactive Elixir (1.2.1) - press Ctrl+C to exit (type h() ENTER for help) | |
iex(demo@nerves)1> IO.puts "hello world" | |
hello world | |
:ok | |
iex(demo@nerves)2> [ 21.606836] random: nonblocking pool is initialized | |
nil | |
iex(demo@nerves)3> |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment