-
-
Save bborysenko/d911e5af26b069bce3129f6abeae003a to your computer and use it in GitHub Desktop.
Install arch-linux - work in progress gui
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| * Installing ARCH linux | |
| Preparation: | |
| - Get an empty USB disk | |
| - Create 2 partitions: | |
| - ARCH - filesystem FAT | |
| - FAT - filesystem FAT | |
| - Downlaod Arch linux from: www.archlinux.org/download and put on your USB ARCH partition | |
| - Make sure you have an Ubuntu install somewhere (VMware would work) | |
| Fix the iso to be usable for UEFI: | |
| $ sudo su | |
| $ mkdir -p /mnt/arch | |
| $ [ go to your USB ARCH partition ] | |
| $ mount -o loop archlinux-2012.12.01-dual.iso /mnt/iso | |
| $ cd /mnt/arch/loaded/entries | |
| $ cat archiso-x86_64.conf | |
| - copy the name behind archisolabel=[THIS ONE]. you need to rename the partition | |
| of the USB onto which you want to install the arch linux iso. In my case it was | |
| ARCH_201303 | |
| - Disconnect the USB, connect it do a Mac again and then rename the USB partition to something like: ARCH_201303 | |
| - Connect the USB to your ubuntu computer after renaming the partition | |
| - Mount again: | |
| mount -o loop archlinux-2012.12.01-dual.iso /mnt/iso | |
| - Disconnect the USB drive | |
| - Put the USB drive in the computer onto which you want to install ARCH | |
| modprobe efivars | |
| Partitioning | |
| ------------ | |
| - Based on: http://manual.aptosid.com/en/part-gdisk-en.htm | |
| Check what disks you have using: fdisk -l | |
| I have: | |
| - /dev/sda SSD - 256GB | |
| - /dev/sdb HD - 1TB | |
| I'm going to partition like: | |
| -- - 200 MB - /dev/sda1 - EFI | |
| / (root) - 250 GB - /dev/sda2 | |
| /boot - 100 MB - /dev/sda3 | |
| /home - 300 GB - /dev/sdb | |
| Partition the SSD + HD | |
| ---------------------- | |
| $ gdisk /dev/sda | |
| - type 'p' to see all paritions which are going to remove | |
| - type 'd' to delete the partitions (you need to enter the partition number too) | |
| Creating new partitions: | |
| ------------------------ | |
| - First we need to create the book UEFI partition (this must be the first one!) | |
| - type 'n' | |
| Partition number: 1 | |
| First sector (blabla): [PRESS ENTER] | |
| Last sector (blabla): +200M | |
| Hex code or GUID: ef00 // ef00 makes it an EFI partition which is necessary for UEFI boot | |
| - Create the /boot parittion | |
| - type 'n' | |
| Partition number: 2 | |
| First sector (blabla): [PRESS ENTER] | |
| Last sector (blabla): +100M | |
| Hex code or GUI: 8300 (linux filesystem) | |
| - Create the root / partition | |
| - type 'n' | |
| Partition number: 3 | |
| First sector (blabla): [PRESS ENTER] | |
| Last sector (blabla): [PRESS ENTER] // this will use the entire disk | |
| Hex code or GUI: 8300 (linux filesystem) | |
| - Write partition to disk, press 'w' | |
| - Create the partitions on the other big harddisk, but first delete the existing ones | |
| - type 'd' if you want to delete the partitions. I removed all partitions | |
| - type 'n' to create the '/home' partition: | |
| Partition number: 1 | |
| First sector (bla bla): [PRESS ENTER] | |
| Last sector (bla bla): [PREFF ENTER] | |
| Hex code or GUI: 8300 (Linux filesystem) | |
| - write to disk, press 'w' | |
| Formatting the partitions | |
| ------------------------- | |
| $ pacman -S dosfstools | |
| $ mkfs -t vfat /dev/sda1 | |
| $ mkfs -t ext4 /dev/sda2 | |
| $ mkfs -t ext4 /dev/sda3 | |
| $ mkfs -t ext4 /dev/sdb1 | |
| Show paritions: | |
| -------------- | |
| $ parted -l | |
| $ lsblk /dev/sda | |
| $ lsblk /dev/sdb | |
| Mounting the filesystem | |
| ------------------------ | |
| $ mkdir /mnt | |
| $ mount /dev/sda3 /mnt | |
| $ mkdir /mnt/boot | |
| $ mkdir /mnt/home | |
| $ mount /dev/sda2 /mnt/boot | |
| $ mount /dev/sdb1 /mnt/home | |
| $ mkdir /mnt/boot/efi | |
| $ mount /dev/sda1 /mnt/boot/efi | |
| Installing the files | |
| ------------------- | |
| $ pacstrap /mnt base base-devel | |
| Configuring the sytem | |
| ---------------------- | |
| - create fstab: | |
| $ genfstab -U -p /mnt > /mnt/etc/fstab | |
| - open your /mnt/etc/fstab, and remove all options from the /dev/sda1 partition. the only option you need to add is "noatime" | |
| /dev/sda1 is your EFI partition. For the other SDA (SSD harddisk) partitions you need to remvoethe relatime as it performs | |
| a write on your SSD card which you don't want, so change them to noatime,discard, like: | |
| $ nano /mnt/etc/fstab | |
| - I have: | |
| # /dev/sda3 | |
| UUID=66c7fe57-17e1-4e57-9475-7de0a9c25308 / ext4 rw,noatime,discard,data=ordered 0 1 | |
| # /dev/sda2 | |
| UUID=0ce4a0c4-c8f6-4f6e-bf2e-15322b76c7f4 /boot ext4 rw,noatime,discard,data=ordered 0 2 | |
| # /dev/sda1 | |
| UUID=07BC-FAE8 /boot/efi vfat noatime 0 2 | |
| # /dev/sdb1 | |
| UUID=3b5a2762-0738-48c5-9f9c-22b66ce92a22 /home ext4 rw,relatime,data=ordered 0 2 | |
| - chroot into your mounted system: | |
| $ arch-chroot /mnt | |
| - set locale: | |
| $ nano /etc/locale.gen | |
| - uncomment: en_US.UTF-8 UTF8 | |
| $ locale-gen | |
| $ echo LANG=en_US.UTF-8 > /etc/locale.conf | |
| $ export LANG=en_US.UTF-8 | |
| - set better looking font: | |
| $ setfont Lat2-Terminus16 | |
| $ nano /etc/vconsole.conf | |
| - add: FONT=Lat2-Terminus16 | |
| - create a initial user | |
| $ useradd -m -g users -s /bin/bash roxlu | |
| $ gpasswd -a roxlu wheel // add roxlu to wheel, necessary for sudoers later on | |
| - set the root password: | |
| $ passwd | |
| - install the nvidia dirvers: | |
| pacman -S nvidia | |
| pacman -S emacs | |
| pacman -S net-tools | |
| pacman -S sudo | |
| pacman -S vim | |
| - configure network card: | |
| $ ifconfig | |
| ( find your ethernet card, mine is: enp5s0) | |
| ( or use $ip link, to find your card) | |
| $ systemctl enable dhcpcd@enp5s0 | |
| $ systemctl start dhcpcd@enp5s0 // (didn't test this) | |
| - configure SUDO | |
| $ /usr/bin/vim -p -X /etc/sudoers | |
| - uncomment: | |
| %wheel ALL=(ALL) ALL | |
| Configuring the bootloader | |
| -------------------------- | |
| $ mkdir -p /boot/efi/EFI/arch | |
| $ cp /boot/vmlinuz-linux /boot/efi/EFI/arch/vmlinuz-arch.efi | |
| $ cp /boot/initramfs-linux.img /boot/efi/EFI/arch/initramfs-arch.img | |
| $ cp /boot/initramfs-linux-fallback.img /boot/efi/EFI/arch/initramfs-arch-fallback.img | |
| - Install the boot menu + copy the files | |
| $ pacman -S refind-efi efibootmgr | |
| $ mkdir -p /boot/efi/EFI/refind | |
| $ cp /usr/lib/refind/refind_x64.efi /boot/efi/EFI/refind/refind_x64.efi | |
| $ cp /usr/lib/refind/config/refind.conf /boot/efi/EFI/refind/refind.conf | |
| $ cp -r /usr/share/refind/icons /boot/efi/EFI/refind/icons | |
| - Edit the configuration | |
| $ nano /boot/efi/EFI/arch/refind_linux.conf | |
| "Boot to X" "root=/dev/sda2 ro rootfstype=ext4 systemd.unit=graphical.target" | |
| "Boot to console" "root=/dev/sda3 ro rootfstype=ext4 systemd.unit=multi-user.target" | |
| - Add the refind menu: | |
| $ efibootmgr -c -g -d /dev/sdX -p Y -w -L "rEFInd" -l '\EFI\refind\refind_x64.efi' | |
| REBOOT | |
| ------ | |
| First reboot, then login with this user | |
| CONTINUE THE SETUP | |
| ----------------- | |
| Configure pacman | |
| ---------------- | |
| $ emacs /etc/pacman.conf | |
| - scroll to the Repositories section (with [core], [extra], [community]) | |
| - uncomment the [multilib] (not the testing), like so: | |
| [multilib] | |
| Include = /etc/pacman.d/mirrorlist | |
| - save the changes and run: | |
| $ pacman -Sy | |
| Install some more packages: | |
| ------------------------- | |
| $ pacman -S wget | |
| $ pacman -S base-devel | |
| $ pacman -S yajl | |
| $ pacman -S openssh | |
| $ pacman -S cmake | |
| $ systemctl start sshd | |
| $ systemctl enable sshd.service | |
| $ wget https://aur.archlinux.org/packages/pa/package-query/package-query.tar.gz | |
| $ tar -zxvf package-query.tar.gz | |
| $ cd package-query | |
| $ makepkg | |
| $ pacman -U package-query-1.1-2-x86_64.pkg.tar.xz | |
| $ wget https://aur.archlinux.org/packages/ya/yaourt/yaourt.tar.gz | |
| $ tar -zxvf yaourt.tar.gz | |
| $ cd yaourt | |
| $ makepkg | |
| $ sudo pacman -U yaourt-1.2.2-1-any.pkg.tar.xz | |
| Install window manager | |
| ---------------------- | |
| $ pacman -S xorg-server xorg-xinit xorg-server-utils | |
| $ pacman -S xorg-twm xorg-xclock xterm | |
| $ pacman -S haskell-haskeline | |
| $ pacman -S xmonad | |
| $ pacman -S xmonad-contrib | |
| $ pacman -S xmobar | |
| $ pacman -S rxvt-unicode | |
| $ pacman -S git | |
| $ cd /home/roxlu | |
| $ mkdir .xmonad | |
| $ cd .xmonad | |
| $ emacs xmonad.hs | |
| ---- put this in xmonad.hs ----- | |
| import XMonad | |
| main = do | |
| xmonad $ defaultConfig | |
| { terminal = "urxvt" | |
| , modMask = mod4Mask | |
| , borderWidth = 3 | |
| } | |
| ---- put this in xmonad.hs ----- | |
| Put this in: ~/.xinit | |
| -- | |
| # set the cursor | |
| xsetroot -cursor_name left_ptr | |
| exec xmonad | |
| -- | |
| Then startx: | |
| $ startx | |
| - you should get a black screen | |
| - exit with ALT + SHIFT + Q | |
| ** NOTES: | |
| - I had to reinstall the "systemd-sysvcompat" packages because I couldn't enter my system, | |
| therefore I had to reboot with the USB boot disk connected and select "Arch Linux ArchISO UEFI USB" | |
| Then: | |
| - arch-chroot /mnt/ | |
| - I had to "re-enable" my ethernet by first finding the name of my ethernet card: | |
| $ ip link | |
| - then I had to do: | |
| $dhcpcd [the name of the card] |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment