mustool_usbc_batterie.scad

$fn = 64;

BASE_X = 42.5;
BASE_Y = 49.5;
BASE_Z = 14;


TH = 1.5;

difference() {
    translate([0,0,BASE_Z/2])cube([BASE_X, BASE_Y, BASE_Z], center=true);
 
    //inner cutout
    difference() {
        translate([0,0,BASE_Z/2-TH])cube([BASE_X-2*TH, BASE_Y-2*TH, BASE_Z], center=true);
        
        //minus extension
        translate([BASE_X/2-BASE_Z/2,-BASE_Y/2+4/2+TH,BASE_Z/2])cube([10, 4, BASE_Z], center=true);
        
        translate([0,0,+BASE_Z/2+7/2])cube([15, 10, 7], center=true);
    }
    
    translate([0,BASE_Y/2-10/2,0])cube([10, 10, 100], center=true);

    //plus cutout    
    translate([-(BASE_X/2-BASE_Z/2),BASE_Y/2,BASE_Z/2])rotate([90,0,0])cylinder(d=3.3, h=10, center=true);
    
    //minus cutout    
    translate([(BASE_X/2-BASE_Z/2),-BASE_Y/2,BASE_Z/2])rotate([90,0,0]){
        cylinder(d=3.3, h=20, center=true);
        translate([0,0,-2])cylinder(d=8, h=20);
    }
    
    cube([10, 4, 100], center=true);
}