Skip to content

Instantly share code, notes, and snippets.

@behrangsa

behrangsa/bunzip021.c

Created June 6, 2019 09:18
Show Gist options
  • Save behrangsa/f2b5fef4934c1c55f59ec17124ddecf6 to your computer and use it in GitHub Desktop.
Save behrangsa/f2b5fef4934c1c55f59ec17124ddecf6 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
bunzip021.c
/*-----------------------------------------------------------*/
/*--- A block-sorting, lossless compressor bzip.c ---*/
/*-----------------------------------------------------------*/
/*--
This program is BZIP, a lossless, block-sorting data compressor,
version 0.21, dated 25-August-1996.
Copyright (C) 1996 by Julian Seward.
Department of Computer Science, University of Manchester,
Oxford Road, Manchester M13 9PL, UK.
email: [email protected]
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
The GNU General Public License is contained in the file LICENSE.
This program is based on (at least) the work of:
Mike Burrows
David Wheeler
Peter Fenwick
Alistair Moffat
Radford Neal
Ian H. Witten
For more information on these sources, see the file ALGORITHMS.
--*/
/*----------------------------------------------------*/
/*--- IMPORTANT ---*/
/*----------------------------------------------------*/
/*--
WARNING:
This program (attempts to) compress data by performing several
non-trivial transformations on it. Unless you are 100% familiar
with *all* the algorithms contained herein, and with the
consequences of modifying them, you should NOT meddle with the
compression or decompression machinery. Incorrect changes can
and very likely *will* lead to disasterous loss of data.
DISCLAIMER:
I TAKE NO RESPONSIBILITY FOR ANY LOSS OF DATA ARISING FROM THE
USE OF THIS PROGRAM, HOWSOEVER CAUSED.
Every compression of a file implies an assumption that the
compressed file can be decompressed to reproduce the original.
Great efforts in design, coding and testing have been made to
ensure that this program works correctly. However, the
complexity of the algorithms, and, in particular, the presence
of various special cases in the code which occur with very low
but non-zero probability make it impossible to rule out the
possibility of bugs remaining in the program. DO NOT COMPRESS
ANY DATA WITH THIS PROGRAM UNLESS YOU ARE PREPARED TO ACCEPT THE
POSSIBILITY, HOWEVER SMALL, THAT THE DATA WILL NOT BE RECOVERABLE.
That is not to say this program is inherently unreliable.
Indeed, I very much hope the opposite is true. BZIP has been
carefully constructed and extensively tested.
--*/
/*----------------------------------------------------*/
/*--- and now for something much more pleasant :-) ---*/
/*----------------------------------------------------*/
/*---------------------------------------------*/
/*--
Place a 1 beside your platform, and 0 elsewhere.
--*/
#define BZ_UNIX_32 1 /*-- generic 32-bit Unix --*/
#define BZ_UNIX_64 0 /*-- generic 64-bit Unix --*/
#define BZ_WIN32_BORLANDC50 0 /*-- Win32/95/NT, Borland C++ 5.0 --*/
#define BZ_WIN32_MSVC20 0 /*-- Win32/95/NT, MS VC++ 2.0 --*/
#define BZ_UNIX (BZ_UNIX_32 | BZ_UNIX_64)
/*---------------------------------------------*/
/*--
Some stuff for all platforms.
--*/
#include <stdio.h>
#include <stdlib.h>
#include <assert.h>
#include <string.h>
#include <signal.h>
#include <errno.h>
#define ERROR_IF_EOF(i) { if ((i) == EOF) ioError(); }
#define ERROR_IF_NOT_ZERO(i) { if ((i) != 0) ioError(); }
#define ERROR_IF_MINUS_ONE(i) { if ((i) == (-1)) ioError(); }
/*---------------------------------------------*/
/*--
Platform-specific stuff.
--*/
#if BZ_UNIX_32
#include <utime.h>
#include <unistd.h>
#include <malloc.h>
#include <sys/stat.h>
#include <sys/times.h>
#define Int32 int
#define UInt32 unsigned int
#define Char char
#define UChar unsigned char
#define PATH_SEP '/'
#define MY_LSTAT lstat
#define MY_S_IFREG S_ISREG
#define MY_STAT stat
#define APPEND_FILESPEC(root, name) \
root=snocString((root), (name))
#define SET_BINARY_MODE(fd) /**/
/*--
You should try very hard to persuade your C compiler
to inline the bits marked INLINE. Otherwise bzip will
run rather slowly. gcc version 2.x is recommended.
--*/
#ifdef __GNUC__
#define INLINE inline
#define NORETURN __attribute__ ((noreturn))
#else
#define INLINE /**/
#define NORETURN /**/
#endif
#endif
#if BZ_UNIX_64
Any volunteers? If so, please mail me the relevant bits.
#endif
#if BZ_WIN32_BORLANDC50
#include <dir.h>
#include <io.h>
#include <fcntl.h>
#include <sys\stat.h>
#include <utime.h>
#define Int32 int
#define UInt32 unsigned int
#define Char char
#define UChar unsigned char
#define INLINE /**/
#define NORETURN /**/
#define PATH_SEP '\\'
#define MY_S_IFREG(x) ((x) & S_IFREG)
#define MY_LSTAT stat
#define MY_STAT stat
#define APPEND_FILESPEC(root, spec) \
do { \
if ((spec)[0] == '-') { \
root = snocString((root), (spec)); \
} else { \
struct ffblk ffblk; \
int done; \
done = findfirst((spec), &ffblk, 0); \
if ( done ) { \
root = snocString ((root), (spec)); \
} else { \
while ( !done ) { \
root = snocString((root), \
&ffblk.ff_name[0]); \
done = findnext(&ffblk); \
} \
} \
} \
} while ( 0 )
#define SET_BINARY_MODE(fd) \
do { \
int retVal = setmode ( fileno ( fd ), \
O_BINARY ); \
ERROR_IF_MINUS_ONE ( retVal ); \
} while ( 0 )
#endif
#if BZ_WIN32_MSVC20
#include <io.h>
#include <fcntl.h>
#include <sys\stat.h>
#include <sys\utime.h>
#define Int32 int
#define UInt32 unsigned int
#define Char char
#define UChar unsigned char
#define INLINE /**/
#define NORETURN /**/
#define PATH_SEP '\\'
#define MY_LSTAT _stat
#define MY_STAT _stat
#define MY_S_IFREG(x) ((x) & _S_IFREG)
#define APPEND_FILESPEC(root, spec) \
do { \
if ((spec)[0] == '-') { \
root = snocString((root), (spec)); \
} else { \
struct _finddata_t c_file; \
long hFile; \
hFile = _findfirst((spec), &c_file); \
if ( hFile == -1L ) { \
root = snocString ((root), (spec)); \
} else { \
int anInt = 0; \
while ( anInt == 0 ) { \
root = snocString((root), \
&c_file.name[0]); \
anInt = _findnext(hFile, &c_file); \
} \
} \
} \
} while ( 0 )
#define SET_BINARY_MODE(fd) \
do { \
int retVal = setmode ( fileno ( fd ), \
O_BINARY ); \
ERROR_IF_MINUS_ONE ( retVal ); \
} while ( 0 )
#endif
/*---------------------------------------------*/
/*--
Some more stuff for all platforms :-)
--*/
#define Bool int
#define True 1
#define False 0
/*--
IntNative is your platform's `native' int size.
Only here to avoid probs with 64-bit platforms.
--*/
#define IntNative int
/*--
change to 1, or compile with -DDEBUG=1 to debug
--*/
#ifndef DEBUG
#define DEBUG 0
#endif
/*---------------------------------------------------*/
/*--- ---*/
/*---------------------------------------------------*/
/*--
Implementation notes, July 1996
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Memory allocation
~~~~~~~~~~~~~~~~~
All large data structures are allocated on the C heap,
for better or for worse. That includes the various
arrays of pointers, striped words, bytes and frequency
tables for compression and decompression. The only non-heap
allocated structures are the coding models and the
BitStream structures, but these are both small.
BZIP can operate at various block-sizes, ranging from
100k to 900k in 100k steps, and it allocates only as
much as it needs to. When compressing, we know from the
command-line options what the block-size is going to be,
so all allocation can be done at start-up; if that
succeeds, there can be no further allocation problems.
Decompression is more complicated. Each compressed file
contains, in its header, a byte indicating the block
size used for compression. This means BZIP potentially
needs to reallocate memory for each file it deals with,
which in turn opens the possibility for a memory allocation
failure part way through a run of files, by encountering
a file requiring a much larger block size than all the
ones preceding it.
The policy is to simply give up if a memory allocation
failure occurs. During decompression, it would be
possible to move on to subsequent files in the hope that
some might ask for a smaller block size, but the
complications for doing this seem more trouble than they
are worth.
Compressed file formats
~~~~~~~~~~~~~~~~~~~~~~~
Perhaps the most important point is that compressed
files start with a 4-byte preamble:
'B' 'Z' -- a crude `magic number'
'0' -- file format version
'1' to '9' -- block size indicator
The third byte gives a trapdoor mechanism so that we can
change file formats and/or algorithm later, without
losing backwards compatibility. The fourth byte
indicates the compression block size; '1' stands for
100k, '2' for 200k, &c.
In the present file format (call it version '0') *all*
material after this 4-byte preamble is written via the
arithmetic coder, using various different models,
including the `bogus' non-adaptive 256-entry model used
to send bytes through the arithmetic coder. The overall
structure of this part is a sequence of blocks, each of
the format
origPtr run-length-coded MTF values EOB
origPtr is a 32-bit number (sent via bogusModel)
indicating the position in the sorted block of the
un-rotated original string. A negative value of
origPtr indicates that this is the last block.
Finally, after all the blocks, there is a 32-bit
CRC value, again sent using the `bogus' model.
The CRC applies to the entirety of the uncompressed
data stream.
The MTF values are coded exactly as with Fenwick's
`structured model', augmented with Wheeler's run-length
coding scheme for zeros. The basis model has an extra
symbol, EOB, denoting the end of the block; if that is
not encountered within the block size indicated by the
preamble, something is wrong.
Error conditions
~~~~~~~~~~~~~~~~
Dealing with error conditions is the least satisfactory
aspect of BZIP. The policy is to try and leave the
filesystem in a consistent state, then quit, even if it
means not processing some of the files mentioned in the
command line. `A consistent state' means that a file
exists either in its compressed or uncompressed form,
but not both. This boils down to the rule `delete the
output file if an error condition occurs, leaving the
input intact'. Input files are only deleted when we can
be pretty sure the output file has been written and
closed successfully.
Errors are a dog because there's so many things to
deal with. The following can happen mid-file, and
require cleaning up.
internal `panics' -- indicating a bug
corrupted compressed file -- block overrun in MTF decode
bad magic number or version on compressed file
can't allocate enough memory to decompress this file
I/O error reading/writing/opening/closing
signal catches -- Control-C, SIGTERM, SIGHUP.
Other conditions, primarily pertaining to file names,
can be checked in-between files, which makes dealing
with them easier.
--*/
/*---------------------------------------------*/
Int32 bytesIn, bytesOut;
Bool verbose, veryVerbose;
Bool compressing, keepInputFiles;
UInt32 globalCrc;
#define OM_FILES_TO_FILES 1
#define OM_FILE_TO_STDOUT 2
#define OM_STDIN_TO_STDOUT 3
Int32 opMode;
Int32 longestFileName;
Char inName[1024];
Char outName[1024];
Char *progName;
Char progNameReally[1024];
FILE *outputHandleJustInCase;
void panic ( Char* ) NORETURN;
void ioError ( void ) NORETURN;
void compressOutOfMemory ( Int32, Int32 ) NORETURN;
void uncompressOutOfMemory ( Int32, Int32 ) NORETURN;
void blockOverrun ( void ) NORETURN;
void unblockError ( void ) NORETURN;
void crcError ( UInt32, UInt32 ) NORETURN;
void bitStreamEOF ( void ) NORETURN;
void cleanUpAndFail ( void ) NORETURN;
void compressedStreamEOF ( void ) NORETURN;
/*---------------------------------------------------*/
/*--- 32-bit CRC grunge ---*/
/*---------------------------------------------------*/
/*--
I think this is an implementation of the AUTODIN-II,
Ethernet & FDDI 32-bit CRC standard. Vaguely derived
from code by Rob Warnock, in Section 51 of the
comp.compression FAQ.
--*/
UInt32 crc32Table[256] = {
/*-- Ugly, innit? --*/
0x00000000L, 0x04c11db7L, 0x09823b6eL, 0x0d4326d9L,
0x130476dcL, 0x17c56b6bL, 0x1a864db2L, 0x1e475005L,
0x2608edb8L, 0x22c9f00fL, 0x2f8ad6d6L, 0x2b4bcb61L,
0x350c9b64L, 0x31cd86d3L, 0x3c8ea00aL, 0x384fbdbdL,
0x4c11db70L, 0x48d0c6c7L, 0x4593e01eL, 0x4152fda9L,
0x5f15adacL, 0x5bd4b01bL, 0x569796c2L, 0x52568b75L,
0x6a1936c8L, 0x6ed82b7fL, 0x639b0da6L, 0x675a1011L,
0x791d4014L, 0x7ddc5da3L, 0x709f7b7aL, 0x745e66cdL,
0x9823b6e0L, 0x9ce2ab57L, 0x91a18d8eL, 0x95609039L,
0x8b27c03cL, 0x8fe6dd8bL, 0x82a5fb52L, 0x8664e6e5L,
0xbe2b5b58L, 0xbaea46efL, 0xb7a96036L, 0xb3687d81L,
0xad2f2d84L, 0xa9ee3033L, 0xa4ad16eaL, 0xa06c0b5dL,
0xd4326d90L, 0xd0f37027L, 0xddb056feL, 0xd9714b49L,
0xc7361b4cL, 0xc3f706fbL, 0xceb42022L, 0xca753d95L,
0xf23a8028L, 0xf6fb9d9fL, 0xfbb8bb46L, 0xff79a6f1L,
0xe13ef6f4L, 0xe5ffeb43L, 0xe8bccd9aL, 0xec7dd02dL,
0x34867077L, 0x30476dc0L, 0x3d044b19L, 0x39c556aeL,
0x278206abL, 0x23431b1cL, 0x2e003dc5L, 0x2ac12072L,
0x128e9dcfL, 0x164f8078L, 0x1b0ca6a1L, 0x1fcdbb16L,
0x018aeb13L, 0x054bf6a4L, 0x0808d07dL, 0x0cc9cdcaL,
0x7897ab07L, 0x7c56b6b0L, 0x71159069L, 0x75d48ddeL,
0x6b93dddbL, 0x6f52c06cL, 0x6211e6b5L, 0x66d0fb02L,
0x5e9f46bfL, 0x5a5e5b08L, 0x571d7dd1L, 0x53dc6066L,
0x4d9b3063L, 0x495a2dd4L, 0x44190b0dL, 0x40d816baL,
0xaca5c697L, 0xa864db20L, 0xa527fdf9L, 0xa1e6e04eL,
0xbfa1b04bL, 0xbb60adfcL, 0xb6238b25L, 0xb2e29692L,
0x8aad2b2fL, 0x8e6c3698L, 0x832f1041L, 0x87ee0df6L,
0x99a95df3L, 0x9d684044L, 0x902b669dL, 0x94ea7b2aL,
0xe0b41de7L, 0xe4750050L, 0xe9362689L, 0xedf73b3eL,
0xf3b06b3bL, 0xf771768cL, 0xfa325055L, 0xfef34de2L,
0xc6bcf05fL, 0xc27dede8L, 0xcf3ecb31L, 0xcbffd686L,
0xd5b88683L, 0xd1799b34L, 0xdc3abdedL, 0xd8fba05aL,
0x690ce0eeL, 0x6dcdfd59L, 0x608edb80L, 0x644fc637L,
0x7a089632L, 0x7ec98b85L, 0x738aad5cL, 0x774bb0ebL,
0x4f040d56L, 0x4bc510e1L, 0x46863638L, 0x42472b8fL,
0x5c007b8aL, 0x58c1663dL, 0x558240e4L, 0x51435d53L,
0x251d3b9eL, 0x21dc2629L, 0x2c9f00f0L, 0x285e1d47L,
0x36194d42L, 0x32d850f5L, 0x3f9b762cL, 0x3b5a6b9bL,
0x0315d626L, 0x07d4cb91L, 0x0a97ed48L, 0x0e56f0ffL,
0x1011a0faL, 0x14d0bd4dL, 0x19939b94L, 0x1d528623L,
0xf12f560eL, 0xf5ee4bb9L, 0xf8ad6d60L, 0xfc6c70d7L,
0xe22b20d2L, 0xe6ea3d65L, 0xeba91bbcL, 0xef68060bL,
0xd727bbb6L, 0xd3e6a601L, 0xdea580d8L, 0xda649d6fL,
0xc423cd6aL, 0xc0e2d0ddL, 0xcda1f604L, 0xc960ebb3L,
0xbd3e8d7eL, 0xb9ff90c9L, 0xb4bcb610L, 0xb07daba7L,
0xae3afba2L, 0xaafbe615L, 0xa7b8c0ccL, 0xa379dd7bL,
0x9b3660c6L, 0x9ff77d71L, 0x92b45ba8L, 0x9675461fL,
0x8832161aL, 0x8cf30badL, 0x81b02d74L, 0x857130c3L,
0x5d8a9099L, 0x594b8d2eL, 0x5408abf7L, 0x50c9b640L,
0x4e8ee645L, 0x4a4ffbf2L, 0x470cdd2bL, 0x43cdc09cL,
0x7b827d21L, 0x7f436096L, 0x7200464fL, 0x76c15bf8L,
0x68860bfdL, 0x6c47164aL, 0x61043093L, 0x65c52d24L,
0x119b4be9L, 0x155a565eL, 0x18197087L, 0x1cd86d30L,
0x029f3d35L, 0x065e2082L, 0x0b1d065bL, 0x0fdc1becL,
0x3793a651L, 0x3352bbe6L, 0x3e119d3fL, 0x3ad08088L,
0x2497d08dL, 0x2056cd3aL, 0x2d15ebe3L, 0x29d4f654L,
0xc5a92679L, 0xc1683bceL, 0xcc2b1d17L, 0xc8ea00a0L,
0xd6ad50a5L, 0xd26c4d12L, 0xdf2f6bcbL, 0xdbee767cL,
0xe3a1cbc1L, 0xe760d676L, 0xea23f0afL, 0xeee2ed18L,
0xf0a5bd1dL, 0xf464a0aaL, 0xf9278673L, 0xfde69bc4L,
0x89b8fd09L, 0x8d79e0beL, 0x803ac667L, 0x84fbdbd0L,
0x9abc8bd5L, 0x9e7d9662L, 0x933eb0bbL, 0x97ffad0cL,
0xafb010b1L, 0xab710d06L, 0xa6322bdfL, 0xa2f33668L,
0xbcb4666dL, 0xb8757bdaL, 0xb5365d03L, 0xb1f740b4L
};
/*---------------------------------------------*/
void initialiseCRC ( void )
{
globalCrc = 0xffffffffL;
}
/*---------------------------------------------*/
UInt32 getFinalCRC ( void )
{
return ~globalCrc;
}
/*---------------------------------------------*/
UInt32 getGlobalCRC ( void )
{
return globalCrc;
}
/*---------------------------------------------*/
void setGlobalCRC ( UInt32 newCrc )
{
globalCrc = newCrc;
}
/*---------------------------------------------*/
#define UPDATE_CRC(crcVar,cha) \
{ \
crcVar = (crcVar << 8) ^ \
crc32Table[(crcVar >> 24) ^ \
((UChar)cha)]; \
}
/*---------------------------------------------------*/
/*--- Bit stream I/O ---*/
/*---------------------------------------------------*/
/*--
Although it seems a bit silly, we restrict
ourselves to one bitstream at a time, so as to
avoid malloc-ing the structure. This avoids any
possible fragmentation-style interactions with
the repeated malloc/free cycles of large areas
which happen during decompression.
bsInUse is a consistency-check feature.
--*/
typedef
struct {
FILE* handle;
Int32 buffer;
Int32 buffLive;
Char mode;
}
BitStream;
BitStream aBitStreamBuffer;
Bool bsInUse;
/*---------------------------------------------*/
BitStream* bsOpenReadStream ( FILE* stream )
{
BitStream *bs;
if (bsInUse) panic ( "bsOpenReadStream" );
bsInUse = True;
bs = &aBitStreamBuffer;
bs->handle = stream;
bs->buffer = 0;
bs->buffLive = 0;
bs->mode = 'r';
return bs;
}
/*---------------------------------------------*/
BitStream* bsOpenWriteStream ( FILE* stream )
{
BitStream *bs;
if (bsInUse) panic ( "bsOpenWriteStream" );
bsInUse = True;
bs = &aBitStreamBuffer;
bs->handle = stream;
bs->buffer = 0;
bs->buffLive = 0;
bs->mode = 'w';
return bs;
}
/*---------------------------------------------*/
INLINE void bsPutBit ( BitStream* bs, Int32 bit )
{
if (bs->buffLive == 8) {
IntNative retVal = putc ( (UChar) bs->buffer, bs->handle );
ERROR_IF_EOF ( retVal );
bytesOut++;
bs->buffLive = 1;
bs->buffer = bit & 0x1;
} else {
bs->buffer = ( (bs->buffer << 1) | (bit & 0x1) );
bs->buffLive++;
};
}
/*---------------------------------------------*/
/*--
We abort if an EOF appears, regardless of whether
an I/O error has happened, or we've really hit
the end of the file. The pseudo-justification for
this is that the caller should interpret the bit
stream and decide for itself when the stream has
ended.
--*/
INLINE Int32 bsGetBit ( BitStream* bs )
{
if (bs->buffLive > 0) {
bs->buffLive --;
return ( ((bs->buffer) >> (bs->buffLive)) & 0x1 );
} else {
IntNative retVal = getc ( bs->handle );
if ( retVal == EOF ) compressedStreamEOF();
bs->buffLive = 7;
bs->buffer = retVal;
if (bs->buffer == EOF) bitStreamEOF();
return ( ((bs->buffer) >> 7) & 0x1 );
}
}
/*---------------------------------------------*/
UChar bsGetUChar ( BitStream* bs )
{
Int32 i;
UInt32 c;
c = 0;
for (i = 0; i <= 7; i++)
c = (c << 1) | bsGetBit ( bs );
return (UChar)c;
}
/*---------------------------------------------*/
void bsPutUChar ( BitStream* bs, UChar c )
{
Int32 i;
for (i = 7; i >= 0; i--)
bsPutBit ( bs, (((UInt32) c) >> i) & 0x1 );
}
/*---------------------------------------------*/
void bsClose ( BitStream* bs )
{
IntNative retVal;
if (!bsInUse) panic ( "bsClose" );
bsInUse = False;
if ( bs->mode == 'w' ) {
while ( bs->buffLive < 8 ) {
bs->buffLive++;
bs->buffer <<= 1;
};
retVal = putc ( (UChar) (bs->buffer), bs->handle );
ERROR_IF_EOF ( retVal );
bytesOut++;
retVal = fflush ( bs->handle );
ERROR_IF_EOF ( retVal );
}
ERROR_IF_NOT_ZERO( ferror(bs->handle) );
retVal = fclose ( bs->handle );
ERROR_IF_EOF ( retVal );
}
/*---------------------------------------------------*/
/*--- Generic frequency-table stuff [data defn] ---*/
/*---------------------------------------------------*/
#define MAX_SYMBOLS 256
/*-- freq[0] is unused, and is kept at zero.
freq[MAX_SYMBOLS+1] is also unused and kept at zero.
This is for historical reasons, and is no longer
necessary.
The counts for symbols 1..numSymbols are
stored at freq[1] .. freq[numSymbols].
Presumably one should make sure that
((incVal + noExceed) / 2) < noExceed
so that scaling always produces sensible results.
We take incValue == 0 to mean that the counts shouldn't
be incremented or scaled.
This data decl has to go before the arithmetic coding stuff.
--*/
typedef
struct {
UInt32 numScalings;
UInt32 numTraffic;
UInt32 totFreq;
UInt32 numSymbols;
UInt32 incValue;
UInt32 noExceed;
Char *name;
UInt32 freq[MAX_SYMBOLS + 2];
}
Model;
/*---------------------------------------------------*/
/*--- The DCC95 arithmetic coder. ---*/
/*---------------------------------------------------*/
/*--
This is a clean-room (ie, my own) implementation of the
coder described in ``Arithmetic Coding Revisited'',
by Alistair Moffat, Radford Neal and Ian Witten,
originally presented at the 1995 IEEE Data Compression
Conference, Snowbird, Utah, USA in March 1995.
The paper has evolved somewhat since then. This
implementation pertains to the June 1996 version of
the paper. In particular, we have an initial value
for R of 2^(b-1) rather than 2^(b-1) - 1, and termination
of coding (overly conservative here) is different.
I don't use the shift-add multiply/divide machinery;
I could, but it adds complexity & I'm not convinced about
the long-term architectural benefit of that approach.
I could be wrong.
--*/
#define TWO_TO_THE(n) (1 << (n))
#define MAX_BITS_OUTSTANDING 500000000
#define smallB 26
#define smallF 18
UInt32 bigL;
UInt32 bigR;
UInt32 bigD;
UInt32 bitsOutstanding;
/*---------------------------------------------*/
INLINE UInt32 minUInt32 ( UInt32 a, UInt32 b )
{
if (a < b) return a; else return b;
}
/*---------------------------------------------*/
INLINE void arithCodeBitPlusFollow ( BitStream *bs, UInt32 bit )
{
bsPutBit ( bs, bit );
while ( bitsOutstanding > 0 ) {
bsPutBit ( bs, 1 - bit );
bitsOutstanding --;
}
}
/*---------------------------------------------*/
void arithCodeStartEncoding ( BitStream *bs )
{
bigL = 0;
bigR = TWO_TO_THE ( smallB - 1 );
bitsOutstanding = 0;
}
/*---------------------------------------------*/
void arithCodeDoneEncoding ( BitStream *bs )
{
Int32 i;
for (i = smallB; i >= 1; i--)
arithCodeBitPlusFollow ( bs, (bigL >> (i-1)) & 0x1 );
}
/*---------------------------------------------*/
void arithCodeStartDecoding ( BitStream *bs )
{
Int32 i;
bigL = 0;
bigR = TWO_TO_THE ( smallB - 1 );
bigD = 0;
for (i = 1; i <= smallB; i++)
bigD = (bigD << 1) + bsGetBit ( bs );
}
/*---------------------------------------------*/
void arithCodeDoneDecoding ( BitStream *bs )
{
/*--- No action necessary. ---*/
}
/*---------------------------------------------*/
INLINE void arithCodeRenormalise_Encode ( BitStream* bs )
{
while (bigR <= TWO_TO_THE ( smallB-2 ) ) {
if ( (bigL + bigR) <= TWO_TO_THE ( smallB-1 ) ) {
arithCodeBitPlusFollow ( bs, 0 );
} else
if ( TWO_TO_THE ( smallB-1 ) <= bigL ) {
arithCodeBitPlusFollow ( bs, 1 );
bigL = bigL - TWO_TO_THE ( smallB-1 );
} else {
bitsOutstanding++;
bigL = bigL - TWO_TO_THE ( smallB-2 );
}
bigL = 2 * bigL;
bigR = 2 * bigR;
}
}
/*---------------------------------------------*/
void arithCodeSymbol ( BitStream *bs, Model *m, Int32 symbol )
{
UInt32 smallL, smallH, smallT, smallR, smallR_x_smallL;
Int32 i;
#if DEBUG
assert ( TWO_TO_THE ( smallB-2 ) < bigR );
assert ( bigR <= TWO_TO_THE ( smallB-1 ) );
assert ( 0 <= bigL );
assert ( bigL < TWO_TO_THE ( smallB ) - TWO_TO_THE ( smallB-2 ) );
assert ( (bigL + bigR) <= TWO_TO_THE ( smallB ) );
#endif
/*--- Set smallL and smallH to the cumfreq values
respectively prior to and including symbol.
---*/
smallT = m->totFreq;
smallL = 0;
for (i = 1; i < symbol; i++) smallL += m->freq[i];
smallH = smallL + m->freq[symbol];
smallR = bigR / smallT;
smallR_x_smallL = smallR * smallL;
bigL = bigL + smallR_x_smallL;
if (smallH < smallT)
bigR = smallR * (smallH - smallL); else
bigR = bigR - smallR_x_smallL;
arithCodeRenormalise_Encode ( bs );
if (bitsOutstanding > MAX_BITS_OUTSTANDING)
panic ( "arithCodeSymbol: too many bits outstanding" );
}
/*---------------------------------------------*/
Int32 arithDecodeSymbol ( BitStream *bs, Model *m )
{
UInt32 smallL, smallH, smallT, smallR;
UInt32 smallR_x_smallL, target, symbol;
smallT = m->totFreq;
/*--- Get target value. ---*/
smallR = bigR / smallT;
target = minUInt32 ( smallT-1, bigD / smallR );
symbol = 0;
smallH = 0;
while (smallH <= target) {
symbol++;
smallH += m->freq[symbol];
}
smallL = smallH - m->freq[symbol];
smallR_x_smallL = smallR * smallL;
bigD = bigD - smallR_x_smallL;
if (smallH < smallT)
bigR = smallR * (smallH - smallL); else
bigR = bigR - smallR_x_smallL;
while ( bigR <= TWO_TO_THE ( smallB-2 ) ) {
bigR = 2 * bigR;
bigD = 2 * bigD + bsGetBit ( bs );
}
return symbol;
}
/*---------------------------------------------------*/
/*--- Generic frequency-table stuff [fn defns] ---*/
/*---------------------------------------------------*/
/*---------------------------------------------*/
void initModel ( Model *m,
Char *initName,
Int32 initNumSymbols,
Int32 initIncValue,
Int32 initNoExceed
)
{
Int32 i;
if (initIncValue == 0) {
m->totFreq = initNumSymbols;
for (i = 1; i <= initNumSymbols; i++)
m->freq[i] = 1;
} else {
m->totFreq = initNumSymbols * initIncValue;
for (i = 1; i <= initNumSymbols; i++)
m->freq[i] = initIncValue;
};
m->numSymbols = initNumSymbols;
m->incValue = initIncValue;
m->noExceed = initNoExceed;
m->name = initName;
m->freq[0] = 0;
m->freq[initNumSymbols + 1] = 0;
m->numScalings = 0;
}
/*---------------------------------------------*/
void dumpModelStats ( Model *m )
{
fprintf (
stderr,
"model %s:\t scalings %d\n",
m->name,
m->numScalings
);
}
/*---------------------------------------------*/
INLINE void updateModel ( Model *m, Int32 symbol )
{
UInt32 i;
m->totFreq += m->incValue;
m->freq[symbol] += m->incValue;
if (m->totFreq > m->noExceed) {
m->totFreq = 0;
m->numScalings++;
for (i = 1; i <= m->numSymbols; i++) {
m->freq[i] = (m->freq[i] + 1) >> 1;
m->totFreq += m->freq[i];
}
}
}
/*---------------------------------------------*/
INLINE void putSymbol ( Model *m, Int32 symbol, BitStream *bs )
{
#if DEBUG
if (! (symbol >= 1 && symbol <= m->numSymbols) )
fprintf ( stderr,
"BAD, mod = %s, sym = %d, max = %d\n",
m->name, symbol, m->numSymbols );
#endif
arithCodeSymbol ( bs, m, symbol );
updateModel ( m, symbol );
}
/*---------------------------------------------*/
INLINE Int32 getSymbol ( Model *m, BitStream *bs )
{
Int32 symbol;
symbol = arithDecodeSymbol ( bs, m );
updateModel ( m, symbol );
#if DEBUG
assert (symbol >= 1 && symbol <= m->numSymbols);
#endif
return symbol;
}
/*---------------------------------------------------*/
/*--- For sending bytes/words thru arith coder ---*/
/*---------------------------------------------------*/
Model bogusModel;
/*---------------------------------------------*/
void initBogusModel ( void )
{
initModel ( &bogusModel, "bogus", 256, 0, 256 );
}
/*---------------------------------------------*/
void putUChar ( BitStream *bs, UChar c )
{
putSymbol ( &bogusModel, 1 + (UInt32)c, bs );
}
/*---------------------------------------------*/
void putInt32 ( BitStream *bs, Int32 i )
{
putUChar ( bs, (UChar) (((UInt32)i >> 24) & 0xFF) );
putUChar ( bs, (UChar) (((UInt32)i >> 16) & 0xFF) );
putUChar ( bs, (UChar) (((UInt32)i >> 8) & 0xFF) );
putUChar ( bs, (UChar) ( (UInt32)i & 0xFF) );
}
/*---------------------------------------------*/
void putUInt32 ( BitStream *bs, UInt32 i )
{
putUChar ( bs, (UChar) ((i >> 24) & 0xFF) );
putUChar ( bs, (UChar) ((i >> 16) & 0xFF) );
putUChar ( bs, (UChar) ((i >> 8) & 0xFF) );
putUChar ( bs, (UChar) ( i & 0xFF) );
}
/*---------------------------------------------*/
UChar getUChar ( BitStream *bs )
{
return (UChar) (getSymbol ( &bogusModel, bs ) - 1);
}
/*---------------------------------------------*/
Int32 getInt32 ( BitStream *bs )
{
UInt32 res = 0;
res |= (getUChar ( bs ) << 24);
res |= (getUChar ( bs ) << 16);
res |= (getUChar ( bs ) << 8);
res |= (getUChar ( bs ) );
return (Int32)res;
}
/*---------------------------------------------*/
UInt32 getUInt32 ( BitStream *bs )
{
UInt32 res = 0;
res |= (getUChar ( bs ) << 24);
res |= (getUChar ( bs ) << 16);
res |= (getUChar ( bs ) << 8);
res |= (getUChar ( bs ) );
return res;
}
/*---------------------------------------------------*/
/*--- The structured model proper ---*/
/*---------------------------------------------------*/
#define BASIS 0
#define MODEL_2_3 1
#define MODEL_4_7 2
#define MODEL_8_15 3
#define MODEL_16_31 4
#define MODEL_32_63 5
#define MODEL_64_127 6
#define MODEL_128_255 7
Model models[8];
/*---------------------------------------------*/
/*--
The parameters in these models and bogusModel
-- specifically, the value of 1000 for
max-total-frequency -- determine the lowest
acceptable values for smallF and indirectly smallB
in the arithmetic coder above.
--*/
void initModels ( void )
{
initModel ( &models[BASIS], "basis", 11, 12, 1000 );
initModel ( &models[MODEL_2_3], "2-3", 2, 4, 1000 );
initModel ( &models[MODEL_4_7], "4-7", 4, 3, 1000 );
initModel ( &models[MODEL_8_15], "8-15", 8, 3, 1000 );
initModel ( &models[MODEL_16_31], "16-31", 16, 3, 1000 );
initModel ( &models[MODEL_32_63], "32-63", 32, 3, 1000 );
initModel ( &models[MODEL_64_127], "64-127", 64, 2, 1000 );
initModel ( &models[MODEL_128_255], "128-255", 128, 1, 1000 );
}
/*---------------------------------------------*/
void dumpAllModelStats ( void )
{
dumpModelStats ( &bogusModel );
dumpModelStats ( &models[BASIS] );
dumpModelStats ( &models[MODEL_2_3] );
dumpModelStats ( &models[MODEL_4_7] );
dumpModelStats ( &models[MODEL_8_15] );
dumpModelStats ( &models[MODEL_16_31] );
dumpModelStats ( &models[MODEL_32_63] );
dumpModelStats ( &models[MODEL_64_127] );
dumpModelStats ( &models[MODEL_128_255] );
}
#define VAL_RUNA 1
#define VAL_RUNB 2
#define VAL_ONE 3
#define VAL_2_3 4
#define VAL_4_7 5
#define VAL_8_15 6
#define VAL_16_31 7
#define VAL_32_63 8
#define VAL_64_127 9
#define VAL_128_255 10
#define VAL_EOB 11
#define RUNA 257
#define RUNB 258
#define EOB 259
#define INVALID 260
/*---------------------------------------------*/
Int32 getMTFVal ( BitStream *bs )
{
Int32 retVal;
switch ( getSymbol ( &models[BASIS], bs ) ) {
case VAL_EOB:
retVal = EOB; break;
case VAL_RUNA:
retVal = RUNA; break;
case VAL_RUNB:
retVal = RUNB; break;
case VAL_ONE:
retVal = 1; break;
case VAL_2_3:
retVal = getSymbol ( &models[MODEL_2_3], bs ) + 2 - 1; break;
case VAL_4_7:
retVal = getSymbol ( &models[MODEL_4_7], bs ) + 4 - 1; break;
case VAL_8_15:
retVal = getSymbol ( &models[MODEL_8_15], bs ) + 8 - 1; break;
case VAL_16_31:
retVal = getSymbol ( &models[MODEL_16_31], bs ) + 16 - 1; break;
case VAL_32_63:
retVal = getSymbol ( &models[MODEL_32_63], bs ) + 32 - 1; break;
case VAL_64_127:
retVal = getSymbol ( &models[MODEL_64_127], bs ) + 64 - 1; break;
default:
retVal = getSymbol ( &models[MODEL_128_255], bs ) + 128 - 1; break;
}
return retVal;
}
/*---------------------------------------------*/
void sendMTFVal ( BitStream *bs, Int32 n )
{
if (n == RUNA) putSymbol ( &models[BASIS], VAL_RUNA, bs ); else
if (n == RUNB) putSymbol ( &models[BASIS], VAL_RUNB, bs ); else
if (n == EOB ) putSymbol ( &models[BASIS], VAL_EOB, bs ); else
if (n == 1) putSymbol ( &models[BASIS], VAL_ONE, bs ); else
if (n >= 2 && n <= 3) {
putSymbol ( &models[BASIS], VAL_2_3, bs );
putSymbol ( &models[MODEL_2_3], n - 2 + 1, bs );
} else
if (n >= 4 && n <= 7) {
putSymbol ( &models[BASIS], VAL_4_7, bs );
putSymbol ( &models[MODEL_4_7], n - 4 + 1, bs );
} else
if (n >= 8 && n <= 15) {
putSymbol ( &models[BASIS], VAL_8_15, bs );
putSymbol ( &models[MODEL_8_15], n - 8 + 1, bs );
} else
if (n >= 16 && n <= 31) {
putSymbol ( &models[BASIS], VAL_16_31, bs );
putSymbol ( &models[MODEL_16_31], n - 16 + 1, bs );
} else
if (n >= 32 && n <= 63) {
putSymbol ( &models[BASIS], VAL_32_63, bs );
putSymbol ( &models[MODEL_32_63], n - 32 + 1, bs );
} else
if (n >= 64 && n <= 127) {
putSymbol ( &models[BASIS], VAL_64_127, bs );
putSymbol ( &models[MODEL_64_127], n - 64 + 1, bs );
} else
if (n >= 128 && n <= 255) {
putSymbol ( &models[BASIS], VAL_128_255, bs );
putSymbol ( &models[MODEL_128_255], n - 128 + 1, bs );
} else {
panic ( "sendMTFVal: bad value!" );
}
}
/*---------------------------------------------------*/
/*--- Move-to-front encoding/decoding ---*/
/*---------------------------------------------------*/
/*--
These are the main data structures for
the Burrows-Wheeler transform.
--*/
/*--
For good performance, fullGt() allows pointers
to get partially denormalised. As a consequence,
we have to copy some small quantity of data
from the beginning of a block to the end of it
so things still work right. These constants control
that.
--*/
#define NUM_FULLGT_UNROLLINGS 4
#define MAX_DENORM_OFFSET (4 * NUM_FULLGT_UNROLLINGS)
/*--
Pointers to compression and decompression
structures. Set by
allocateCompressStructures and
setDecompressStructureSizes
The structures are always set to be suitable
for a block of size 100000 * blockSize100k.
--*/
UInt32 *words; /*-- compress --*/
Int32 *zptr; /*-- compress & uncompress --*/
Int32 *ftab; /*-- compress --*/
UChar *block; /*-- uncompress --*/
UChar *ll; /*-- uncompress --*/
/*--
always: lastPP == last+1.
See discussion in sortIt().
--*/
Int32 last;
Int32 lastPP;
/*--
index in ptr[] of original string after sorting.
--*/
Int32 origPtr;
/*--
always: in the range 0 .. 9.
The current block size is 100000 * this number.
--*/
Int32 blockSize100k;
/*---------------------------------------------*/
/*--
Manage memory for compression/decompression.
When compressing, a single block size applies to
all files processed, and that's set when the
program starts. But when decompressing, each file
processed could have been compressed with a
different block size, so we may have to free
and reallocate on a per-file basis.
A call with argument of zero means
`free up everything.' And a value of zero for
blockSize100k means no memory is currently allocated.
--*/
/*---------------------------------------------*/
void allocateCompressStructures ( void )
{
Int32 n = 100000 * blockSize100k;
words = malloc ( (n + MAX_DENORM_OFFSET) * sizeof(Int32) );
zptr = malloc ( n * sizeof(Int32) );
ftab = malloc ( 65537 * sizeof(Int32) );
if (words == NULL || zptr == NULL || ftab == NULL) {
Int32 totalDraw = (n + MAX_DENORM_OFFSET) * sizeof(Int32) +
n * sizeof(Int32) +
65537 * sizeof(Int32);
compressOutOfMemory ( totalDraw, n );
}
}
/*---------------------------------------------*/
void setDecompressStructureSizes ( Int32 newSize100k )
{
assert (0 <= newSize100k && newSize100k <= 9);
assert (0 <= blockSize100k && blockSize100k <= 9);
if (newSize100k == blockSize100k)
return;
blockSize100k = newSize100k;
if (block != NULL) free ( block );
if (ll != NULL) free ( ll );
if (zptr != NULL) free ( zptr );
if (newSize100k == 0) {
block = NULL;
ll = NULL;
zptr = NULL;
} else {
Int32 n = 100000 * newSize100k;
block = malloc ( n * sizeof(UChar) );
ll = malloc ( n * sizeof(UChar) );
zptr = malloc ( n * sizeof(Int32) );
if (block == NULL || ll == NULL || zptr == NULL) {
Int32 totalDraw = 6 * n * sizeof(UChar);
uncompressOutOfMemory ( totalDraw, n );
}
}
}
/*---------------------------------------------*/
#define IF_THEN_ELSE(c,t,e) ((c) ? (t) : (e))
#define GETFIRST(a) ((UChar)(words[a] >> 24))
#define GETREST(a) (words[a] & 0x00ffffff)
#define SETALL(a,w) words[a] = (w)
#define GETFIRST16(a) ((UInt32)(words[a] >> 16))
#define GETREST16(a) (words[a] & 0x0000ffff)
INLINE UInt32 GETALL ( Int32 a )
{
#if DEBUG
assert (a >= 0 && a < lastPP + 4 * NUM_FULLGT_UNROLLINGS);
if (a >= lastPP) assert (words[a] == words[a-lastPP]);
#endif
return words[a];
}
INLINE void SETREST16 ( Int32 a, UInt32 w )
{
words[a] = (words[a] & 0xffff0000) | (((UInt32)(w)) & 0x0000ffff);
}
INLINE void SETFIRST16 ( Int32 a, UInt32 w )
{
words[a] = (words[a] & 0x0000ffff) | (((UInt32)(w)) << 16);
}
INLINE void SETREST ( Int32 a, UInt32 w )
{
words[a] = (words[a] & 0xff000000) | (((UInt32)(w)) & 0x00ffffff);
}
INLINE void SETFIRST ( Int32 a, UChar c )
{
words[a] = (words[a] & 0x00ffffff) | (((UInt32)(c)) << 24);
}
INLINE void SETSECOND ( Int32 a, UChar c )
{
words[a] = (words[a] & 0xff00ffff) | (((UInt32)(c)) << 16);
}
INLINE void SETTHIRD ( Int32 a, UChar c )
{
words[a] = (words[a] & 0xffff00ff) | (((UInt32)(c)) << 8);
}
INLINE void SETFOURTH ( Int32 a, UChar c )
{
words[a] = (words[a] & 0xffffff00) | (((UInt32)(c)));
}
/*---------------------------------------------*/
INLINE Int32 NORMALISE ( Int32 p )
{
return
IF_THEN_ELSE ( ((p) < 0),
((p)+lastPP),
IF_THEN_ELSE ( ((p)>=lastPP),
((p)-lastPP),
(p)
)
);
}
/*---------------------------------------------*/
INLINE Int32 NORMALISEHI ( Int32 p )
{
return
IF_THEN_ELSE ( ((p)>=lastPP),
((p)-lastPP),
(p)
);
}
/*---------------------------------------------*/
INLINE Int32 NORMALISELO ( Int32 p )
{
return
IF_THEN_ELSE ( ((p) < 0),
((p)+lastPP),
(p)
);
}
/*---------------------------------------------*/
/* The above normalisers are quick but only work when
* p exceeds the block by less than lastPP, since
* they renormalise merely by adding or subtracting
* lastPP. This one always works, although slowly.
*/
INLINE Int32 STRONG_NORMALISE ( Int32 p )
{
/* -ve number MOD +ve number always
* was one of life's little mysteries ...
*/
while (p < 0) { p += lastPP; };
return
p % lastPP;
}
/*---------------------------------------------*/
void sendZeroes ( BitStream *outStream, Int32 zeroesPending )
{
UInt32 bitsToSend;
Int32 numBits;
if (zeroesPending == 0)
return;
bitsToSend = 0;
numBits = 0;
while (zeroesPending != 0) {
numBits++;
bitsToSend <<= 1;
zeroesPending--;
if ((zeroesPending & 0x1) == 1) bitsToSend |= 1;
zeroesPending >>= 1;
}
while (numBits > 0) {
if ((bitsToSend & 0x1) == 1)
sendMTFVal ( outStream, RUNA ); else
sendMTFVal ( outStream, RUNB );
bitsToSend >>= 1;
numBits--;
}
}
/*---------------------------------------------*/
void moveToFrontCodeAndSend ( BitStream *outStream,
Bool thisIsTheLastBlock
)
{
UChar yy[256];
Int32 i, j;
UChar tmp;
UChar tmp2;
Int32 zeroesPending;
zeroesPending = 0;
if (thisIsTheLastBlock)
putInt32 ( outStream, - ( origPtr+1 ) ); else
putInt32 ( outStream, ( origPtr+1 ) );
initModels ();
for (i = 0; i <= 255; i++)
yy[i] = (UChar) i;
for (i = 0; i <= last; i++) {
UChar ll_i;
ll_i = GETFIRST ( NORMALISELO ( zptr[i] - 1 ) );
j = 0;
tmp = yy[j];
while ( ll_i != tmp ) {
j++;
tmp2 = tmp;
tmp = yy[j];
yy[j] = tmp2;
};
yy[0] = tmp;
if (j == 0) {
zeroesPending++;
} else {
sendZeroes ( outStream, zeroesPending );
zeroesPending = 0;
sendMTFVal ( outStream, j );
}
}
sendZeroes ( outStream, zeroesPending );
sendMTFVal ( outStream, EOB );
}
/*---------------------------------------------*/
Bool getAndMoveToFrontDecode ( BitStream *inStream )
{
UChar yy[256];
Int32 i, j, tmpOrigPtr, nextSym, limit;
limit = 100000 * blockSize100k;
tmpOrigPtr = getInt32 ( inStream );
if (tmpOrigPtr < 0)
origPtr = ( -tmpOrigPtr ) - 1; else
origPtr = tmpOrigPtr - 1;
initModels ();
for (i = 0; i <= 255; i++)
yy[i] = (UChar) i;
last = -1;
nextSym = getMTFVal ( inStream );
LOOPSTART:
if (nextSym == EOB)
return (tmpOrigPtr < 0);
/*--- acquire run-length bits, most significant first ---*/
if (nextSym == RUNA || nextSym == RUNB) {
Int32 n = 0;
do {
n <<= 1;
if (nextSym == RUNA) n |= 1;
n++;
nextSym = getMTFVal ( inStream );
}
while (nextSym == RUNA || nextSym == RUNB);
while (n > 0) {
last++; if (last >= limit) blockOverrun();
ll[last] = yy[0];
n--;
}
goto LOOPSTART;
}
if (nextSym >= 1 && nextSym <= 255) {
last++; if (last >= limit) blockOverrun();
ll[last] = yy[nextSym];
/*--
This loop is hammered during decompression,
hence the unrolling.
for (j = nextSym; j > 0; j--) yy[j] = yy[j-1];
--*/
j = nextSym;
for (; j > 3; j -= 4) {
yy[j] = yy[j-1];
yy[j-1] = yy[j-2];
yy[j-2] = yy[j-3];
yy[j-3] = yy[j-4];
}
for (; j > 0; j--) yy[j] = yy[j-1];
yy[0] = ll[last];
nextSym = getMTFVal ( inStream );
goto LOOPSTART;
}
fprintf ( stderr, "bad MTF value %d\n", nextSym );
panic ( "getAndMoveToFrontDecode\n" );
/*--- panic never returns ---*/
return True;
}
/*---------------------------------------------------*/
/*--- The Reversible Transformation (tm) ---*/
/*---------------------------------------------------*/
/*---------------------------------------------*/
/*--- Use: ll[0 .. last] and origPtr
Def: block[0 .. last]
---*/
void undoReversibleTransformation ( void )
{
Int32 cc[256];
Int32 i, j, ch, sum;
for (i = 0; i <= 255; i++) cc[i] = 0;
for (i = 0; i <= last; i++) {
UChar ll_i = ll[i];
zptr[i] = cc[ll_i];
cc[ll_i] ++;
};
sum = 0;
for (ch = 0; ch <= 255; ch++) {
sum = sum + cc[ch];
cc[ch] = sum - cc[ch];
};
i = origPtr;
for (j = last; j >= 0; j--) {
UChar ll_i = ll[i];
block[j] = ll_i;
i = zptr[i] + cc[ll_i];
};
}
/*---------------------------------------------------*/
/*--- The block loader and RLEr ---*/
/*---------------------------------------------------*/
#define SPOT_BASIS_STEP 8000
/*---------------------------------------------*/
void spotBlock ( Bool weAreCompressing )
{
Int32 pos, delta, newdelta;
pos = SPOT_BASIS_STEP;
delta = 1;
while (pos < last) {
Int32 n;
if (weAreCompressing)
n = (Int32)GETFIRST(pos) + 1; else
n = (Int32)block[pos] - 1;
if (n == 256) n = 0; else if (n == -1) n = 255;
if (! (n >= 0 && n <= 255) ) panic ( "spotBlock" );
if (weAreCompressing)
SETFIRST(pos, (UChar)n); else
block[pos] = (UChar)n;
switch (delta) {
case 3: newdelta = 1; break;
case 1: newdelta = 4; break;
case 4: newdelta = 5; break;
case 5: newdelta = 9; break;
case 9: newdelta = 2; break;
case 2: newdelta = 6; break;
case 6: newdelta = 7; break;
case 8: newdelta = 8; break;
case 7: newdelta = 3; break;
default: newdelta = 1; break;
}
delta = newdelta;
pos = pos + SPOT_BASIS_STEP + 17 * (newdelta - 5);
}
}
/*---------------------------------------------*/
/* Top 16: run length, 1 to 255.
* Lower 16: the char, or MY_EOF for EOF.
*/
#define MY_EOF 257
INLINE Int32 getRLEpair ( FILE* src )
{
Int32 runLength;
IntNative ch, chLatest;
ch = getc ( src );
/*--- Because I have no idea what kind of a value EOF is. ---*/
if (ch == EOF) {
ERROR_IF_NOT_ZERO ( errno );
return (1 << 16) | MY_EOF;
}
runLength = 0;
do {
chLatest = getc ( src );
runLength++;
bytesIn++;
}
while (ch == chLatest && runLength < 255);
if ( chLatest != EOF ) {
if ( ungetc ( chLatest, src ) == EOF )
panic ( "getRLEpair: ungetc failed" );
} else {
ERROR_IF_NOT_ZERO ( errno );
}
/*--- Conditional is just a speedup hack. ---*/
if (runLength == 1) {
UPDATE_CRC ( globalCrc, (UChar)ch );
return (1 << 16) | ch;
} else {
Int32 i;
for (i = 1; i <= runLength; i++)
UPDATE_CRC ( globalCrc, (UChar)ch );
return (runLength << 16) | ch;
}
}
/*---------------------------------------------*/
Bool loadAndRLEsource ( FILE* src )
{
Int32 ch, allowableBlockSize;
last = -1;
ch = 0;
/*--- 20 is just a paranoia constant ---*/
allowableBlockSize = 100000 * blockSize100k - 20;
while (last < allowableBlockSize && ch != MY_EOF) {
Int32 rlePair, runLen;
rlePair = getRLEpair ( src );
ch = rlePair & 0xFFFF;
runLen = (UInt32)rlePair >> 16;
#if DEBUG
assert (runLen >= 1 && runLen <= 255);
#endif
if (ch == MY_EOF)
{ last++; SETFIRST(last, ((UChar)42)); }
else
switch (runLen) {
case 1:
last++; SETFIRST(last, ((UChar)ch)); break;
case 2:
last++; SETFIRST(last, ((UChar)ch));
last++; SETFIRST(last, ((UChar)ch)); break;
case 3:
last++; SETFIRST(last, ((UChar)ch));
last++; SETFIRST(last, ((UChar)ch));
last++; SETFIRST(last, ((UChar)ch)); break;
default:
last++; SETFIRST(last, ((UChar)ch));
last++; SETFIRST(last, ((UChar)ch));
last++; SETFIRST(last, ((UChar)ch));
last++; SETFIRST(last, ((UChar)ch));
last++; SETFIRST(last, ((UChar)(runLen-4))); break;
}
}
return (ch == MY_EOF);
}
/*---------------------------------------------*/
/*--
This new version is derived from some code
sent to me Christian von Roques.
--*/
void unRLEandDump ( FILE* dst, Bool thisIsTheLastBlock )
{
IntNative retVal;
Int32 lastCharToSpew, i, count, chPrev, ch;
UInt32 localCrc;
if (thisIsTheLastBlock)
lastCharToSpew = last - 1; else
lastCharToSpew = last;
count = 0;
i = 0;
ch = 256; /*-- not a char and not EOF --*/
localCrc = getGlobalCRC();
while ( i <= lastCharToSpew ) {
chPrev = ch;
ch = block[i];
i++;
retVal = putc ( ch, dst );
ERROR_IF_EOF ( retVal );
UPDATE_CRC ( localCrc, (UChar)ch );
if (ch != chPrev) {
count = 1;
} else {
count++;
if (count >= 4) {
Int32 j;
for (j = 0; j < (Int32)block[i]; j++) {
retVal = putc (ch, dst);
ERROR_IF_EOF ( retVal );
UPDATE_CRC ( localCrc, (UChar)ch );
}
i++;
count = 0;
}
}
}
setGlobalCRC ( localCrc );
if (thisIsTheLastBlock && block[last] != 42) unblockError ();
}
/*---------------------------------------------------*/
/*--- Processing of complete files and streams ---*/
/*---------------------------------------------------*/
/*---------------------------------------------*/
Bool uncompressStream ( FILE *zStream, FILE *stream )
{
Bool thisIsTheLastBlock;
BitStream *zbs;
Int32 magic1, magic2, magic3, magic4;
UInt32 crcStored, crcComputed;
Int32 currBlockNo;
IntNative retVal;
SET_BINARY_MODE(stream);
SET_BINARY_MODE(zStream);
zbs = ( bsOpenReadStream ( zStream ) );
/*--
A bad magic number is `recoverable from';
return with False so the caller skips the file.
--*/
magic1 = (Int32)bsGetUChar ( zbs );
magic2 = (Int32)bsGetUChar ( zbs );
magic3 = (Int32)bsGetUChar ( zbs );
magic4 = (Int32)bsGetUChar ( zbs );
if (magic1 != 'B' ||
magic2 != 'Z' ||
magic3 != '0' ||
magic4 < '1' ||
magic4 > '9') {
bsClose ( zbs );
retVal = fclose ( stream );
ERROR_IF_EOF ( retVal );
return False;
}
setDecompressStructureSizes ( magic4 - '0' );
initialiseCRC ();
initBogusModel ();
arithCodeStartDecoding ( zbs );
if (veryVerbose) fprintf ( stderr, "\n " );
currBlockNo = 0;
do {
currBlockNo++;
if (veryVerbose)
fprintf ( stderr, "[%d: ac+mtf ", currBlockNo );
thisIsTheLastBlock = getAndMoveToFrontDecode ( zbs );
if (veryVerbose) fprintf ( stderr, "rt " );
undoReversibleTransformation ();
spotBlock ( False );
if (veryVerbose) fprintf ( stderr, "rld" );
unRLEandDump ( stream, thisIsTheLastBlock );
if (veryVerbose) fprintf ( stderr, "] " );
}
while ( ! thisIsTheLastBlock );
if (veryVerbose) fprintf ( stderr, "\n " );
/*-- A bad CRC is considered a fatal error. --*/
crcStored = getUInt32 ( zbs );
crcComputed = getFinalCRC ();
if (veryVerbose)
fprintf ( stderr,
"CRCs: stored = 0x%x, computed = 0x%x\n ",
crcStored, crcComputed );
if (crcStored != crcComputed)
crcError ( crcStored, crcComputed );
arithCodeDoneDecoding ( zbs );
bsClose ( zbs );
ERROR_IF_NOT_ZERO ( ferror(stream) );
retVal = fclose ( stream );
ERROR_IF_EOF ( retVal );
return True;
}
/*---------------------------------------------------*/
/*--- Error [non-] handling grunge ---*/
/*---------------------------------------------------*/
/*---------------------------------------------*/
void showFileNames ( void )
{
fprintf (
stderr,
"\tInput file = %s, output file = %s\n",
(opMode == OM_STDIN_TO_STDOUT) ? "(stdin)" : inName,
(opMode != OM_FILES_TO_FILES) ? "(stdout)" : outName
);
}
/*---------------------------------------------*/
void cleanUpAndFail ( void )
{
IntNative retVal;
if ( opMode == OM_FILES_TO_FILES ) {
fprintf ( stderr, "%s: Deleting output file %s, if it exists.\n",
progName, outName );
if (outputHandleJustInCase != NULL)
fclose ( outputHandleJustInCase );
retVal = remove ( outName );
if (retVal != 0)
fprintf ( stderr,
"%s: WARNING: deletion of output file (apparently) failed.\n",
progName );
}
exit ( 1 );
}
/*---------------------------------------------*/
void panic ( Char* s )
{
fprintf ( stderr,
"\n%s: PANIC -- internal consistency error:\n"
"\t%s\n"
"\tThis is a BUG. Please report it to me at:\n"
"\[email protected].\n",
progName, s );
showFileNames();
cleanUpAndFail();
}
/*---------------------------------------------*/
void crcError ( UInt32 crcStored, UInt32 crcComputed )
{
fprintf ( stderr,
"\n%s: Data integrity error when decompressing.\n"
"\tStored CRC = 0x%x, computed CRC = 0x%x\n"
"\tThis could be a bug -- please report it to me at:\n"
"\[email protected].\n",
progName, crcStored, crcComputed );
showFileNames();
cleanUpAndFail();
}
/*---------------------------------------------*/
void compressedStreamEOF ( void )
{
fprintf ( stderr,
"\n%s: Compressed file ends unexpectedly;\n\t"
"perhaps it is corrupted? *Possible* reason follows.\n",
progName );
perror ( progName );
showFileNames();
cleanUpAndFail();
}
/*---------------------------------------------*/
void ioError ( )
{
fprintf ( stderr,
"\n%s: I/O or other error, bailing out. Possible reason follows.\n",
progName );
perror ( progName );
showFileNames();
cleanUpAndFail();
}
/*---------------------------------------------*/
void blockOverrun ()
{
fprintf ( stderr,
"\n%s: block overrun during decompression,\n"
"\twhich probably means the compressed file\n"
"\tis corrupted.\n",
progName );
showFileNames();
cleanUpAndFail();
}
/*---------------------------------------------*/
void unblockError ()
{
fprintf ( stderr,
"\n%s: compressed file didn't unblock correctly,\n"
"\twhich probably means it is corrupted.\n",
progName );
showFileNames();
cleanUpAndFail();
}
/*---------------------------------------------*/
void bitStreamEOF ()
{
fprintf ( stderr,
"\n%s: read past the end of compressed data,\n"
"\twhich probably means it is corrupted.\n",
progName );
showFileNames();
cleanUpAndFail();
}
/*---------------------------------------------*/
void mySignalCatcher ( IntNative n )
{
fprintf ( stderr,
"\n%s: Control-C (or similar) caught, quitting.\n",
progName );
cleanUpAndFail();
}
/*---------------------------------------------*/
void mySIGSEGVorSIGBUScatcher ( IntNative n )
{
if (compressing)
fprintf ( stderr,
"\n%s: Caught a SIGSEGV or SIGBUS whilst compressing,\n"
"\twhich probably indicates a bug in BZIP. Please\n"
"\treport it to me at: [email protected]\n",
progName );
else
fprintf ( stderr,
"\n%s: Caught a SIGSEGV or SIGBUS whilst decompressing,\n"
"\twhich probably indicates that the compressed data\n"
"\tis corrupted.\n",
progName );
showFileNames();
cleanUpAndFail();
}
/*---------------------------------------------*/
void uncompressOutOfMemory ( Int32 draw, Int32 blockSize )
{
fprintf ( stderr,
"\n%s: Can't allocate enough memory for decompression.\n"
"\tRequested %d bytes for a block size of %d.\n"
"\tFind a machine with more memory, perhaps?\n",
progName, draw, blockSize );
showFileNames();
cleanUpAndFail();
}
/*---------------------------------------------*/
void compressOutOfMemory ( Int32 draw, Int32 blockSize )
{
fprintf ( stderr,
"\n%s: Can't allocate enough memory for compression.\n"
"\tRequested %d bytes for a block size of %d.\n"
"\tReduce the block size, and/or use the -e flag.\n",
progName, draw, blockSize );
showFileNames();
cleanUpAndFail();
}
/*---------------------------------------------------*/
/*--- The main driver machinery ---*/
/*---------------------------------------------------*/
/*---------------------------------------------*/
void pad ( Char *s )
{
Int32 i;
if ( (Int32)strlen(s) >= longestFileName ) return;
for (i = 1; i <= longestFileName - (Int32)strlen(s); i++)
fprintf ( stderr, " " );
}
/*---------------------------------------------*/
Bool fileExists ( Char* name )
{
FILE *tmp = fopen ( name, "rb" );
Bool exists = (tmp != NULL);
if (tmp != NULL) fclose ( tmp );
return exists;
}
/*---------------------------------------------*/
/*--
if in doubt, return True
--*/
Bool notABogStandardFile ( Char* name )
{
IntNative i;
struct MY_STAT statBuf;
i = MY_LSTAT ( name, &statBuf );
if (i != 0) return True;
if (MY_S_IFREG(statBuf.st_mode)) return False;
return True;
}
/*---------------------------------------------*/
void copyDateAndPermissions ( Char *srcName, Char *dstName )
{
IntNative retVal;
struct MY_STAT statBuf;
struct utimbuf uTimBuf;
retVal = MY_LSTAT ( srcName, &statBuf );
ERROR_IF_NOT_ZERO ( retVal );
uTimBuf.actime = statBuf.st_atime;
uTimBuf.modtime = statBuf.st_mtime;
retVal = chmod ( dstName, statBuf.st_mode );
ERROR_IF_NOT_ZERO ( retVal );
retVal = utime ( dstName, &uTimBuf );
ERROR_IF_NOT_ZERO ( retVal );
}
/*---------------------------------------------*/
Bool endsInBz ( Char* name )
{
Int32 n = strlen ( name );
if (n <= 3) return False;
return
(name[n-3] == '.' &&
name[n-2] == 'b' &&
name[n-1] == 'z');
}
/*---------------------------------------------*/
Bool containsDubiousChars ( Char* name )
{
Bool cdc = False;
for (; *name != '\0'; name++)
if (*name == '?' || *name == '*') cdc = True;
return cdc;
}
/*---------------------------------------------*/
void uncompress ( Char *name )
{
FILE *inStr;
FILE *outStr;
Bool magicNumberOK;
strcpy ( inName, name );
strcpy ( outName, name );
if ( endsInBz ( inName ) )
outName [ strlen ( outName ) - 3 ] = '\0';
if ( opMode != OM_STDIN_TO_STDOUT && containsDubiousChars ( inName ) ) {
fprintf ( stderr, "%s: There are no files matching `%s'.\n",
progName, inName );
return;
}
if ( opMode != OM_STDIN_TO_STDOUT && !fileExists ( inName ) ) {
fprintf ( stderr, "%s: Input file %s doesn't exist, skipping.\n",
progName, inName );
return;
}
if ( opMode != OM_STDIN_TO_STDOUT && !endsInBz ( inName )) {
fprintf ( stderr,
"%s: Input file name %s doesn't end in `.bz', skipping.\n",
progName, inName );
return;
}
if ( opMode != OM_STDIN_TO_STDOUT && notABogStandardFile ( inName )) {
fprintf ( stderr, "%s: Input file %s is not a normal file, skipping.\n",
progName, inName );
return;
}
if ( opMode == OM_FILES_TO_FILES && fileExists ( outName ) ) {
fprintf ( stderr, "%s: Output file %s already exists, skipping.\n",
progName, outName );
return;
}
switch ( opMode ) {
case OM_STDIN_TO_STDOUT:
inStr = stdin;
outStr = stdout;
if ( isatty ( fileno ( stdin ) ) ) {
fprintf ( stderr,
"%s: I won't read compressed data from a terminal.\n",
progName );
fprintf ( stderr, "%s: For help, type: `%s --help'.\n",
progName, progName );
return;
};
break;
case OM_FILE_TO_STDOUT:
inStr = fopen ( inName, "rb" );
outStr = stdout;
if ( inStr == NULL ) {
fprintf ( stderr, "%s: Can't open input file %s, skipping.\n",
progName, inName );
return;
};
break;
case OM_FILES_TO_FILES:
inStr = fopen ( inName, "rb" );
outStr = fopen ( outName, "wb" );
if ( outStr == NULL) {
fprintf ( stderr, "%s: Can't create output file %s, skipping.\n",
progName, outName );
return;
}
if ( inStr == NULL ) {
fprintf ( stderr, "%s: Can't open input file %s, skipping.\n",
progName, inName );
return;
};
break;
default:
panic ( "uncompress: bad opMode" );
break;
}
if (verbose) {
fprintf ( stderr,
" %s: ",
opMode == OM_STDIN_TO_STDOUT ? "(stdin)" : inName );
pad ( opMode == OM_STDIN_TO_STDOUT ? "(stdin)" : inName );
fflush ( stderr );
}
/*--- Now the input and output handles are sane. Do the Biz. ---*/
errno = 0;
outputHandleJustInCase = outStr;
magicNumberOK = uncompressStream ( inStr, outStr );
outputHandleJustInCase = NULL;
/*--- If there was an I/O error, we won't get here. ---*/
if ( magicNumberOK ) {
if ( opMode == OM_FILES_TO_FILES ) {
copyDateAndPermissions ( inName, outName );
if ( !keepInputFiles ) {
IntNative retVal = remove ( inName );
ERROR_IF_NOT_ZERO ( retVal );
}
}
} else {
if ( opMode == OM_FILES_TO_FILES ) {
IntNative retVal = remove ( outName );
ERROR_IF_NOT_ZERO ( retVal );
}
}
if ( magicNumberOK ) {
if (verbose)
fprintf ( stderr, "done\n" );
} else {
if (verbose)
fprintf ( stderr, "not a BZIP file, skipping.\n" ); else
fprintf ( stderr,
"%s: %s is not a BZIP file, skipping.\n",
progName,
opMode == OM_STDIN_TO_STDOUT ? "(stdin)" : inName );
}
}
/*---------------------------------------------*/
void license ( void )
{
fprintf ( stderr,
" \n"
" Copyright (C) 1996 by Julian Seward.\n"
" \n"
" This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2 of the License, or\n"
" (at your option) any later version.\n"
" \n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
" GNU General Public License for more details.\n"
" \n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.\n"
" \n"
" The GNU General Public License is contained in the file LICENSE.\n"
" \n"
);
}
/*---------------------------------------------*/
void usage ( Char *fullProgName )
{
fprintf (
stderr,
"\nusage: %s [flags and input files in any order]\n"
"\n"
" Flags: -d force decompression\n"
" -f force compression\n"
" -c output to standard out\n"
" -v, -V be verbose, or very verbose\n"
" -k keep (don't delete) input files\n"
" -L display software license\n"
" -1 .. -9 set block size of 100k .. 900k\n"
"\n"
" If invoked as `bzip', the default action is to compress.\n"
" as `bunzip', the default action is to decompress.\n"
"\n"
" If no file names are given, bzip compresses or decompresses\n"
" from standard input to standard output. You can combine\n"
" flags, so `-v -e -4' means the same as -ve4 or -4ev, &c.\n"
"\n"
" The default block size is 900k, which soaks up a lot of\n"
" memory for compression (7700k) and decompression (4500k).\n"
" You may want to select a smaller block size; see the manual\n"
" for details. Smaller sizes give slightly less compression.\n"
" -e also saves memory during compression, at some speed cost.\n"
"\n",
fullProgName
);
}
/*---------------------------------------------*/
/*--
All the garbage from here to main() is purely to
implement a linked list of command-line arguments,
into which main() copies argv[1 .. argc-1].
The purpose of this ridiculous exercise is to
facilitate the expansion of wildcard characters
* and ? in filenames for halfwitted OSs like
MSDOS, Windows 95 and NT ... yawn.
The actual Dirty Work is done by the platform-specific
macro APPEND_FILESPEC.
--*/
typedef
struct zzzz {
Char *name;
struct zzzz *link;
}
Cell;
/*---------------------------------------------*/
void *myMalloc ( size_t n )
{
void* p;
p = malloc ( n );
if (p == NULL) {
fprintf (
stderr,
"%s: `malloc' failed during processing of command-line args.\n",
progName
);
exit ( 1 );
}
return p;
}
/*---------------------------------------------*/
Cell *mkCell ( void )
{
Cell *c;
c = (Cell*) myMalloc ( sizeof ( Cell ) );
c->name = NULL;
c->link = NULL;
return c;
}
/*---------------------------------------------*/
Cell *snocString ( Cell *root, Char *name )
{
if (root == NULL) {
Cell *tmp = mkCell();
tmp->name = (Char*) myMalloc ( 5 + strlen(name) );
strcpy ( tmp->name, name );
return tmp;
} else {
Cell *tmp = root;
while (tmp->link != NULL) tmp = tmp->link;
tmp->link = snocString ( tmp->link, name );
return root;
}
}
/*---------------------------------------------*/
IntNative main ( IntNative argc, Char *argv[] )
{
Int32 numFileNames;
Int32 i, j;
Char *tmp;
Cell *argList;
Cell *aa;
outputHandleJustInCase = NULL;
ftab = NULL;
block = NULL;
ll = NULL;
words = NULL;
zptr = NULL;
bsInUse = False;
errno = 0;
strcpy ( progNameReally, argv[0] );
progName = &progNameReally[0];
for (tmp = &progNameReally[0]; *tmp != '\0'; tmp++)
if (*tmp == PATH_SEP) progName = tmp + 1;
argList = NULL;
for (i = 1; i <= argc-1; i++)
APPEND_FILESPEC(argList, argv[i]);
strcpy ( inName, "-" );
strcpy ( outName, "-" );
signal (SIGINT, mySignalCatcher);
signal (SIGTERM, mySignalCatcher);
signal (SIGSEGV, mySIGSEGVorSIGBUScatcher);
#if BZ_UNIX
signal (SIGHUP, mySignalCatcher);
signal (SIGBUS, mySIGSEGVorSIGBUScatcher);
#endif
if ( ! (argc > 1 && strcmp ( "-Q", argv[1] ) == 0) )
fprintf ( stderr,
"BUNZIP-0.21, a block-sorting file decompressor. "
"14-Sept-97.\n" );
#if DEBUG
if ( ! (argc > 1 && strcmp ( "-Q", argv[1] ) == 0) )
fprintf ( stderr, "BZIP: *** compiled with debugging ON ***\n" );
#endif
if (sizeof(Int32) != 4 || sizeof(UInt32) != 4 ||
sizeof(Char) != 1 || sizeof(UChar) != 1) {
fprintf ( stderr,
"BZIP: I require sizeof(Int32) == 4 bytes and\n"
"\tsizeof(Char) == 1 byte to run properly, sorry!\n"
"\tProbably you can fix this by defining them correctly,\n"
"\tand recompiling.\n" );
exit(1);
}
longestFileName = 7;
numFileNames = 0;
for (aa = argList; aa != NULL; aa = aa->link)
if (aa->name[0] != '-') {
numFileNames++;
if (longestFileName < (Int32)strlen(aa->name) )
longestFileName = (Int32)strlen(aa->name);
}
keepInputFiles = False;
compressing = True;
verbose = False;
veryVerbose = False;
if (numFileNames == 0)
opMode = OM_STDIN_TO_STDOUT; else
opMode = OM_FILES_TO_FILES;
if ( (strcmp ( "bunzip", progName ) == 0) ||
(strcmp ( "BUNZIP", progName ) == 0) ||
(strcmp ( "bunzip.exe", progName ) == 0) ||
(strcmp ( "BUNZIP.EXE", progName ) == 0) )
compressing = False;
if (compressing) blockSize100k = 9;
for (aa = argList; aa != NULL; aa = aa->link)
if (aa->name[0] == '-')
for (j = 1; aa->name[j] != '\0'; j++)
switch (aa->name[j]) {
case 'Q': break;
case 'c': opMode = OM_FILE_TO_STDOUT; break;
case 'd': compressing = False; break;
case 'f': compressing = True; break;
case 'v': verbose = True; break;
case 'k': keepInputFiles = True; break;
case '1': blockSize100k = 1; break;
case '2': blockSize100k = 2; break;
case '3': blockSize100k = 3; break;
case '4': blockSize100k = 4; break;
case '5': blockSize100k = 5; break;
case '6': blockSize100k = 6; break;
case '7': blockSize100k = 7; break;
case '8': blockSize100k = 8; break;
case '9': blockSize100k = 9; break;
case 'L': license(); break;
case 'V': verbose = True;
veryVerbose = True; break;
default: fprintf ( stderr, "%s: Bad flag `%s'\n",
progName, aa->name );
usage ( progName );
exit ( 1 );
break;
}
if ( opMode == OM_FILE_TO_STDOUT && numFileNames != 1) {
fprintf ( stderr, "%s: Option -c requires you to supply exactly one filename.\n",
progName );
exit ( 1 );
}
compressing = False;
if ( !compressing ) blockSize100k = 0;
{
if (opMode == OM_STDIN_TO_STDOUT)
uncompress ( "-" );
else
for (aa = argList; aa != NULL; aa = aa->link)
if (aa->name[0] != '-') uncompress ( aa->name );
}
exit ( 0 );
return 0;
}
/*-----------------------------------------------------------*/
/*--- end bzip.c ---*/
/*-----------------------------------------------------------*/
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment