Benjamin Flesch bf

I've used this guide through 2024 despite archinstall and it's still more or less valid. After having used archinstall twice and having encountered obscure issues (luksOpen taking ages, or slow reboots in general) I switched back to a manual setup and it seems to be almost as straightforward.

Always refer to the official guide in case of doubt.

First things first

One important thing first: the environment you will encounter on the live image is very different from what you'll end up installing, some things are significantly easier there: e.g. wifi tools come

# stop active raid
mdadm --stop /dev/md[01]

# destroy partition table on hdds
dd if=/dev/zero of=/dev/sda bs=1M count=512
dd if=/dev/zero of=/dev/sdb bs=1M count=512
dd if=/dev/zero of=/dev/sdc bs=1M count=512
dd if=/dev/zero of=/dev/sdd bs=1M count=512

Docker compose as a systemd unit

Create file /etc/systemd/system/[email protected]. SystemD calling binaries using an absolute path. In my case is prefixed by /usr/local/bin, you should use paths specific for your environment.

[Unit]
Description=%i service with docker compose
PartOf=docker.service
After=docker.service

# stop active raid
mdadm --stop /dev/md[01]

# destroy partition table on hdds
dd if=/dev/zero of=/dev/sda bs=1M count=512
dd if=/dev/zero of=/dev/sdb bs=1M count=512

# create new partition table
sgdisk -og /dev/sda

Unlimited redistribution and modification of this document is allowed provided that the above copyright notice and this permission notice remains in tact.

If you are reading this, you probably asked for a (unaffiliated) cloak on freenode because you wanted to hide your IP or hostname.

This text is here to tell you that cloaks and vHosts don't hide your IP very well. Cloaks on freenode show your (lack of) affiliation with a project or a group being hosted on freenode.

	{ "processors": [
	{
	"dissect": {
	"field": "message",
	"pattern": "<Event><System><Provider Name=\"Linux-Sysmon\" Guid=\"{ff032593-a8d3-4f13-b0d6-01fc615a0f97}\"/><EventID>%{event.id}</EventID>",
	"description": "Extract Sysmon System Data"
	}
	},
	{
	"dissect": {

	//------------------------------------------------
	//--- 010 Editor v9.0.2 Binary Template
	//
	// File: ETL.bt
	// Authors: Zhentar
	// Version: 1.0
	// Purpose: Microsoft Event Tracing for Windows ETL file format
	// Category: Misc
	// File Mask: *.etl
	// History:

	var request = require('request');
	var unzip = require('unzip');
	var csv2 = require('csv2');

	request.get('http://s3.amazonaws.com/alexa-static/top-1m.csv.zip')
	.pipe(unzip.Parse())
	.on('entry', function (entry) {
	entry.pipe(csv2()).on('data', console.log);
	})
	;

	#!/usr/bin/env python

	'''
	Uses SURF to match two images.

	Based on the sample code from opencv:
	samples/python2/find_obj.py

	USAGE
	find_obj.py <image1> <image2>

	default['sshd']['sshd_config']['AuthenticationMethods'] = 'publickey,keyboard-interactive:pam'
	default['sshd']['sshd_config']['ChallengeResponseAuthentication'] = 'yes'
	default['sshd']['sshd_config']['PasswordAuthentication'] = 'no'