TODO
SSH to your UDM
ssh root@<udm ip address>
<enter the password you set when prompted>
Configure the IPv6 Tunnel - You get the addresses from the Tunnel Details page on TunnelBroker
ip tunnel add he-ipv6 mode sit remote <server ipv4 address> local <client ipv4 address> ttl 255
ip link set he-ipv6 up
ip addr add <client ipv6 address> dev he-ipv6
ip route add ::/0 dev he-ipv6
ip -f inet6 addr
Test Connectivity from UDM
ping 2600::
Setup Address Allocation
TODO
...you can test ipv6 firewall blocking at ipv6scanner.com and entering your local machine's IPv6 address. All ports with the exception of the ones you've created ALLOW rules for should show as
CLOSED
orFILTERED