Skip to content

Instantly share code, notes, and snippets.

@binoybcompany

binoybcompany/OpenConnect VPN on Mac OS X

Created October 16, 2014 07:04
Show Gist options
  • Save binoybcompany/2a7a2c98d72c8aeb0823 to your computer and use it in GitHub Desktop.
Save binoybcompany/2a7a2c98d72c8aeb0823 to your computer and use it in GitHub Desktop.
Download ZIP
Installing OpenConnect VPN on Mac OS X
Raw
OpenConnect VPN on Mac OS X
https://gist.github.com/moklett/3170636
http://zanshin.net/2013/08/27/setup-openconnect-for-mac-os-x-lion/
@binoybcompany
Copy link
Author

!/bin/sh

Originally part of vpnc source code:

© 2005-2012 Maurice Massar, Jörg Mayer, Antonio Borneo et al.

© 2009-2012 David Woodhouse [email protected]

This program is free software; you can redistribute it and/or modify

it under the terms of the GNU General Public License as published by

the Free Software Foundation; either version 2 of the License, or

(at your option) any later version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

GNU General Public License for more details.

You should have received a copy of the GNU General Public License

along with this program; if not, write to the Free Software

Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA

List of parameters passed through environment

* reason -- why this script was called, one of: pre-init connect disconnect reconnect

* VPNGATEWAY -- vpn gateway address (always present)

* TUNDEV -- tunnel device (always present)

* INTERNAL_IP4_ADDRESS -- address (always present)

* INTERNAL_IP4_MTU -- mtu (often unset)

* INTERNAL_IP4_NETMASK -- netmask (often unset)

* INTERNAL_IP4_NETMASKLEN -- netmask length (often unset)

* INTERNAL_IP4_NETADDR -- address of network (only present if netmask is set)

* INTERNAL_IP4_DNS -- list of dns servers

* INTERNAL_IP4_NBNS -- list of wins servers

* INTERNAL_IP6_ADDRESS -- IPv6 address

* INTERNAL_IP6_NETMASK -- IPv6 netmask

* INTERNAL_IP6_DNS -- IPv6 list of dns servers

* CISCO_DEF_DOMAIN -- default domain name

* CISCO_BANNER -- banner from server

* CISCO_SPLIT_INC -- number of networks in split-network-list

* CISCO_SPLIT_INC_%d_ADDR -- network address

* CISCO_SPLIT_INC_%d_MASK -- subnet mask (for example: 255.255.255.0)

* CISCO_SPLIT_INC_%d_MASKLEN -- subnet masklen (for example: 24)

* CISCO_SPLIT_INC_%d_PROTOCOL -- protocol (often just 0)

* CISCO_SPLIT_INC_%d_SPORT -- source port (often just 0)

* CISCO_SPLIT_INC_%d_DPORT -- destination port (often just 0)

* CISCO_IPV6_SPLIT_INC -- number of networks in IPv6 split-network-list

* CISCO_IPV6_SPLIT_INC_%d_ADDR -- IPv6 network address

* CISCO_IPV6_SPLIT_INC_$%d_MASKLEN -- IPv6 subnet masklen

FIXMEs:

Section A: route handling

#1) The 3 values CISCO_SPLIT_INC_%d_PROTOCOL/SPORT/DPORT are currently being ignored

In order to use them, we'll probably need os specific solutions

* Linux: iptables -t mangle -I PREROUTING -j ROUTE --oif $TUNDEV

This would be an alternative to changing the routes (and thus 2) and 3)

shouldn't be relevant at all)

#2) There are two different functions to set routes: generic routes and the

default route. Why isn't the defaultroute handled via the generic route case?

#3) In the split tunnel case, all routes but the default route might get replaced

without getting restored later. We should explicitely check and save them just

like the defaultroute

#4) Replies to a dhcp-server should never be sent into the tunnel

Section B: Split DNS handling

#1) Maybe dnsmasq can do something like that
#2) Parse dns packets going out via tunnel and redirect them to original dns-server

env | sort

set -x

=========== script (variable) setup ====================================

PATH=/sbin:/usr/sbin:$PATH

OS="uname -s"

HOOKS_DIR=/etc/vpnc
DEFAULT_ROUTE_FILE=/var/run/vpnc/defaultroute
RESOLV_CONF_BACKUP=/var/run/vpnc/resolv.conf-backup
SCRIPTNAME=basename $0

some systems, eg. Darwin & FreeBSD, prune /var/run on boot

if [ ! -d "/var/run/vpnc" ]; then
mkdir -p /var/run/vpnc
[ -x /sbin/restorecon ] && /sbin/restorecon /var/run/vpnc
fi

stupid SunOS: no blubber in /usr/local/bin ... (on stdout)

IPROUTE="which ip 2> /dev/null | grep '^/'"

if ifconfig --help 2>&1 | grep BusyBox > /dev/null; then
ifconfig_syntax_inet=""
else
ifconfig_syntax_inet="inet"
fi

if [ "$OS" = "Linux" ]; then
ifconfig_syntax_ptp="pointopoint"
route_syntax_gw="gw"
route_syntax_del="del"
route_syntax_netmask="netmask"
else
ifconfig_syntax_ptp=""
route_syntax_gw=""
route_syntax_del="delete"
route_syntax_netmask="-netmask"
fi
if [ "$OS" = "SunOS" ]; then
route_syntax_interface="-interface"
ifconfig_syntax_ptpv6="$INTERNAL_IP6_ADDRESS"
else
route_syntax_interface=""
ifconfig_syntax_ptpv6=""
fi

if [ -r /etc/openwrt_release ] && [ -n "$OPENWRT_INTERFACE" ]; then
. /etc/functions.sh
include /lib/network
MODIFYRESOLVCONF=modify_resolvconf_openwrt
RESTORERESOLVCONF=restore_resolvconf_openwrt
elif [ -x /sbin/resolvconf ] && [ "$OS" != "FreeBSD" ]; then # Optional tool on Debian, Ubuntu, Gentoo - but not FreeBSD, it seems to work different
MODIFYRESOLVCONF=modify_resolvconf_manager
RESTORERESOLVCONF=restore_resolvconf_manager
elif [ -x /sbin/netconfig ]; then # tool on Suse after 11.1
MODIFYRESOLVCONF=modify_resolvconf_suse_netconfig
RESTORERESOLVCONF=restore_resolvconf_suse_netconfig
elif [ -x /sbin/modify_resolvconf ]; then # Mandatory tool on Suse earlier than 11.1
MODIFYRESOLVCONF=modify_resolvconf_suse
RESTORERESOLVCONF=restore_resolvconf_suse
elif [ -x /usr/sbin/unbound-control ] && /usr/sbin/unbound-control status > /dev/null 2>&1; then
MODIFYRESOLVCONF=modify_resolvconf_unbound
RESTORERESOLVCONF=restore_resolvconf_unbound
else # Generic for any OS
MODIFYRESOLVCONF=modify_resolvconf_generic
RESTORERESOLVCONF=restore_resolvconf_generic
fi

=========== script hooks =================================================

run_hooks() {
HOOK="$1"

if [ -d ${HOOKS_DIR}/${HOOK}.d ]; then
    for script in ${HOOKS_DIR}/${HOOK}.d/* ; do
    [ -f $script ] && . $script
    done
fi

}

=========== tunnel interface handling ====================================

do_ifconfig() {
if [ -n "$INTERNAL_IP4_MTU" ]; then
MTU=$INTERNAL_IP4_MTU
elif [ -n "$IPROUTE" ]; then
MTUDEV=$IPROUTE route get "$VPNGATEWAY" | sed -ne 's/^.*dev \([a-z0-9]*\).*$/\1/p'
MTU=$IPROUTE link show "$MTUDEV" | sed -ne 's/^.*mtu \([[:digit:]]\+\).*$/\1/p'
if [ -n "$MTU" ]; then
MTU=expr $MTU - 88
fi
fi

if [ -z "$MTU" ]; then
    MTU=1412
fi

# Point to point interface require a netmask of 255.255.255.255 on some systems
if [ -n "$IPROUTE" ]; then
    $IPROUTE link set dev "$TUNDEV" up mtu "$MTU"
    $IPROUTE addr add "$INTERNAL_IP4_ADDRESS/32" peer "$INTERNAL_IP4_ADDRESS" dev "$TUNDEV"
else
    ifconfig "$TUNDEV" ${ifconfig_syntax_inet} "$INTERNAL_IP4_ADDRESS" $ifconfig_syntax_ptp "$INTERNAL_IP4_ADDRESS" netmask 255.255.255.255 mtu ${MTU} up
fi

if [ -n "$INTERNAL_IP4_NETMASK" ]; then
    set_network_route $INTERNAL_IP4_NETADDR $INTERNAL_IP4_NETMASK $INTERNAL_IP4_NETMASKLEN
fi

# If the netmask is provided, it contains the address _and_ netmask
if [ -n "$INTERNAL_IP6_ADDRESS" ] && [ -z "$INTERNAL_IP6_NETMASK" ]; then
    INTERNAL_IP6_NETMASK="$INTERNAL_IP6_ADDRESS/128"
fi
if [ -n "$INTERNAL_IP6_NETMASK" ]; then
    if [ -n "$IPROUTE" ]; then
    $IPROUTE -6 addr add $INTERNAL_IP6_NETMASK dev $TUNDEV
    else
    # Unlike for Legacy IP, we don't specify the dest_address
    # here on *BSD. OpenBSD for one will refuse to accept
    # incoming packets to that address if we do.
    # OpenVPN does the same (gives dest_address for Legacy IP
    # but not for IPv6).
    # Only Solaris needs it; hence $ifconfig_syntax_ptpv6
        ifconfig "$TUNDEV" inet6 $INTERNAL_IP6_NETMASK $ifconfig_syntax_ptpv6 mtu $MTU up
    fi
fi

}

destroy_tun_device() {
case "$OS" in
NetBSD|OpenBSD) # and probably others...
ifconfig "$TUNDEV" destroy
;;
FreeBSD)
ifconfig "$TUNDEV" destroy > /dev/null 2>&1 &
;;
esac
}

=========== route handling ====================================

if [ -n "$IPROUTE" ]; then
fix_ip_get_output () {
sed -e 's/ /\n/g' |
sed -ne '1p;/via/{N;p};/dev/{N;p};/src/{N;p};/mtu/{N;p}'
}

set_vpngateway_route() {
    $IPROUTE route add `$IPROUTE route get "$VPNGATEWAY" | fix_ip_get_output`
    $IPROUTE route flush cache
}

del_vpngateway_route() {
    $IPROUTE route $route_syntax_del "$VPNGATEWAY"
    $IPROUTE route flush cache
}

set_default_route() {
    $IPROUTE route | grep '^default' | fix_ip_get_output > "$DEFAULT_ROUTE_FILE"
    $IPROUTE route replace default dev "$TUNDEV"
    $IPROUTE route flush cache
}

set_network_route() {
    NETWORK="$1"
    NETMASK="$2"
    NETMASKLEN="$3"
    $IPROUTE route replace "$NETWORK/$NETMASKLEN" dev "$TUNDEV"
    $IPROUTE route flush cache
}

reset_default_route() {
    if [ -s "$DEFAULT_ROUTE_FILE" ]; then
        $IPROUTE route replace `cat "$DEFAULT_ROUTE_FILE"`
        $IPROUTE route flush cache
        rm -f -- "$DEFAULT_ROUTE_FILE"
    fi
}

del_network_route() {
    NETWORK="$1"
    NETMASK="$2"
    NETMASKLEN="$3"
    $IPROUTE route $route_syntax_del "$NETWORK/$NETMASKLEN" dev "$TUNDEV"
    $IPROUTE route flush cache
}

set_ipv6_default_route() {
    # We don't save/restore IPv6 default route; just add a higher-priority one.
    $IPROUTE -6 route add default dev "$TUNDEV" metric 1
    $IPROUTE -6 route flush cache
}

set_ipv6_network_route() {
    NETWORK="$1"
    NETMASKLEN="$2"
    $IPROUTE -6 route replace "$NETWORK/$NETMASKLEN" dev "$TUNDEV"
    $IPROUTE route flush cache
}

reset_ipv6_default_route() {
    $IPROUTE -6 route del default dev "$TUNDEV"
    $IPROUTE route flush cache
}

del_ipv6_network_route() {
    NETWORK="$1"
    NETMASKLEN="$2"
    $IPROUTE -6 route del "$NETWORK/$NETMASKLEN" dev "$TUNDEV"
    $IPROUTE -6 route flush cache
}

else # use route command
get_default_gw() {
# isn't -n supposed to give --numeric output?
# apperently not...
# Get rid of lines containing IPv6 addresses (':')
netstat -r -n | awk '/:/ { next; } /^(default|0.0.0.0)/ { print $2; }'
}

set_vpngateway_route() {
    route add -host "$VPNGATEWAY" $route_syntax_gw "`get_default_gw`"
}

del_vpngateway_route() {
    route $route_syntax_del -host "$VPNGATEWAY" $route_syntax_gw "`get_default_gw`"
}

set_default_route() {
    DEFAULTGW="`get_default_gw`"
    echo "$DEFAULTGW" > "$DEFAULT_ROUTE_FILE"
    route $route_syntax_del default $route_syntax_gw "$DEFAULTGW"
    route add default $route_syntax_gw "$INTERNAL_IP4_ADDRESS" $route_syntax_interface
}

set_network_route() {
    NETWORK="$1"
    NETMASK="$2"
    NETMASKLEN="$3"
    del_network_route "$NETWORK" "$NETMASK" "$NETMASKLEN"
    route add -net "$NETWORK" $route_syntax_netmask "$NETMASK" $route_syntax_gw "$INTERNAL_IP4_ADDRESS" $route_syntax_interface
}

reset_default_route() {
    if [ -s "$DEFAULT_ROUTE_FILE" ]; then
        route $route_syntax_del default $route_syntax_gw "`get_default_gw`" $route_syntax_interface
        route add default $route_syntax_gw `cat "$DEFAULT_ROUTE_FILE"`
        rm -f -- "$DEFAULT_ROUTE_FILE"
    fi
}

del_network_route() {
    case "$OS" in
    Linux|NetBSD|OpenBSD|Darwin|SunOS) # and probably others...
        # routes are deleted automatically on device shutdown
        return
        ;;
    esac
    NETWORK="$1"
    NETMASK="$2"
    NETMASKLEN="$3"
    route $route_syntax_del -net "$NETWORK" $route_syntax_netmask "$NETMASK" $route_syntax_gw "$INTERNAL_IP4_ADDRESS"
}

set_ipv6_default_route() {
    route add -inet6 default "$INTERNAL_IP6_ADDRESS" $route_syntax_interface
}

set_ipv6_network_route() {
    NETWORK="$1"
    NETMASK="$2"
    route add -inet6 -net "$NETWORK/$NETMASK" "$INTERNAL_IP6_ADDRESS" $route_syntax_interface
    :
}

reset_ipv6_default_route() {
    route $route_syntax_del -inet6 default "$INTERNAL_IP6_ADDRESS"
    :
}

del_ipv6_network_route() {
    NETWORK="$1"
    NETMASK="$2"
    route $route_syntax_del -inet6 "$NETWORK/$NETMASK" "$INTERNAL_IP6_ADDRESS"
    :
}

fi

=========== resolv.conf handling ====================================

=========== resolv.conf handling for any OS =========================

modify_resolvconf_generic() {
grep '^#@VPNC_GENERATED@' /etc/resolv.conf > /dev/null 2>&1 || cp -- /etc/resolv.conf "$RESOLV_CONF_BACKUP"
NEW_RESOLVCONF="#@VPNC_GENERATED@ -- this file is generated by vpnc

and will be overwritten by vpnc

as long as the above mark is intact"

# Remember the original value of CISCO_DEF_DOMAIN we need it later
CISCO_DEF_DOMAIN_ORIG="$CISCO_DEF_DOMAIN"
# Don't step on INTERNAL_IP4_DNS value, use a temporary variable
INTERNAL_IP4_DNS_TEMP="$INTERNAL_IP4_DNS"
exec 6< "$RESOLV_CONF_BACKUP"
while read LINE <&6 ; do
    case "$LINE" in
        nameserver*)
            if [ -n "$INTERNAL_IP4_DNS_TEMP" ]; then
                read ONE_NAMESERVER INTERNAL_IP4_DNS_TEMP <<-EOF
$INTERNAL_IP4_DNS_TEMP

EOF
LINE="nameserver $ONE_NAMESERVER"
else
LINE=""
fi
;;
search_)
if [ -n "$CISCO_DEF_DOMAIN" ]; then
LINE="$LINE $CISCO_DEF_DOMAIN"
CISCO_DEF_DOMAIN=""
fi
;;
domain_)
if [ -n "$CISCO_DEF_DOMAIN" ]; then
LINE="domain $CISCO_DEF_DOMAIN"
CISCO_DEF_DOMAIN=""
fi
;;
esac
NEW_RESOLVCONF="$NEW_RESOLVCONF
$LINE"
done
exec 6<&-

for i in $INTERNAL_IP4_DNS_TEMP ; do
    NEW_RESOLVCONF="$NEW_RESOLVCONF

nameserver $i"
done
if [ -n "$CISCO_DEF_DOMAIN" ]; then
NEW_RESOLVCONF="$NEW_RESOLVCONF
search $CISCO_DEF_DOMAIN"
fi
echo "$NEW_RESOLVCONF" > /etc/resolv.conf

if [ "$OS" = "Darwin" ]; then
    case "`uname -r`" in
        # Skip for pre-10.4 systems
        4.*|5.*|6.*|7.*)
            ;;
        #10.4 and later require use of scutil for DNS to work properly
        *)
            OVERRIDE_PRIMARY=""
            if [ -n "$CISCO_SPLIT_INC" ]; then
                if [ $CISCO_SPLIT_INC -lt 1 ]; then
                    # Must override for correct default route
                    # Cannot use multiple DNS matching in this case
                    OVERRIDE_PRIMARY='d.add OverridePrimary # 1'
                fi
            fi
            # Uncomment the following if/fi pair to use multiple
            # DNS matching when available.  When multiple DNS matching
            # is present, anything reading the /etc/resolv.conf file
            # directly will probably not work as intended.
            #if [ -z "$CISCO_DEF_DOMAIN_ORIG" ]; then
                # Cannot use multiple DNS matching without a domain
                OVERRIDE_PRIMARY='d.add OverridePrimary # 1'
            #fi
            scutil >/dev/null 2>&1 <<-EOF
                open
                d.init
                d.add ServerAddresses * $INTERNAL_IP4_DNS
                set State:/Network/Service/$TUNDEV/DNS
                d.init
                # next line overrides the default gateway and breaks split routing
                # d.add Router $INTERNAL_IP4_ADDRESS
                d.add Addresses * $INTERNAL_IP4_ADDRESS
                d.add SubnetMasks * 255.255.255.255
                d.add InterfaceName $TUNDEV
                $OVERRIDE_PRIMARY
                set State:/Network/Service/$TUNDEV/IPv4
                close
            EOF
            if [ -n "$CISCO_DEF_DOMAIN_ORIG" ]; then
                scutil >/dev/null 2>&1 <<-EOF
                    open
                    get State:/Network/Service/$TUNDEV/DNS
                    d.add DomainName $CISCO_DEF_DOMAIN_ORIG
                    d.add SearchDomains * $CISCO_DEF_DOMAIN_ORIG
                    d.add SupplementalMatchDomains * $CISCO_DEF_DOMAIN_ORIG
                    set State:/Network/Service/$TUNDEV/DNS
                    close
                EOF
            fi
            ;;
    esac
fi

}

restore_resolvconf_generic() {
if [ ! -f "$RESOLV_CONF_BACKUP" ]; then
return
fi
grep '^#@VPNC_GENERATED@' /etc/resolv.conf > /dev/null 2>&1 && cat "$RESOLV_CONF_BACKUP" > /etc/resolv.conf
rm -f -- "$RESOLV_CONF_BACKUP"

if [ "$OS" = "Darwin" ]; then
    case "`uname -r`" in
        # Skip for pre-10.4 systems
        4.*|5.*|6.*|7.*)
            ;;
        #10.4 and later require use of scutil for DNS to work properly
        *)
            scutil >/dev/null 2>&1 <<-EOF
                open
                remove State:/Network/Service/$TUNDEV/IPv4
                remove State:/Network/Service/$TUNDEV/DNS
                close
            EOF
            ;;
    esac
fi

}

=== resolv.conf handling via /sbin/netconfig (Suse 11.1) =====================

Suse provides a script that modifies resolv.conf. Use it because it will

restart/reload all other services that care about it (e.g. lwresd). [unclear if this is still true, but probably --mlk]

modify_resolvconf_suse_netconfig()
{
/sbin/netconfig modify -s vpnc -i "$TUNDEV" <<-EOF
INTERFACE='$TUNDEV'
DNSSERVERS='$INTERNAL_IP4_DNS'
DNSDOMAIN='$CISCO_DEF_DOMAIN'
EOF
}

Restore resolv.conf to old contents on Suse

restore_resolvconf_suse_netconfig()
{
/sbin/netconfig remove -s vpnc -i "$TUNDEV"
}

=== resolv.conf handling via /sbin/modify_resolvconf (Suse) =====================

Suse provides a script that modifies resolv.conf. Use it because it will

restart/reload all other services that care about it (e.g. lwresd).

modify_resolvconf_suse()
{
FULL_SCRIPTNAME=readlink -f $0
RESOLV_OPTS=''
test -n "$INTERNAL_IP4_DNS" && RESOLV_OPTS="-n "$INTERNAL_IP4_DNS""
test -n "$CISCO_DEF_DOMAIN" && RESOLV_OPTS="$RESOLV_OPTS -d $CISCO_DEF_DOMAIN"
test -n "$RESOLV_OPTS" && eval /sbin/modify_resolvconf modify -s vpnc -p $SCRIPTNAME -f $FULL_SCRIPTNAME -e $TUNDEV $RESOLV_OPTS -t "This file was created by $SCRIPTNAME"
}

Restore resolv.conf to old contents on Suse

restore_resolvconf_suse()
{
FULL_SCRIPTNAME=readlink -f $0
/sbin/modify_resolvconf restore -s vpnc -p $SCRIPTNAME -f $FULL_SCRIPTNAME -e $TUNDEV
}

=== resolv.conf handling via UCI (OpenWRT) =========

modify_resolvconf_openwrt() {
add_dns $OPENWRT_INTERFACE $INTERNAL_IP4_DNS
}

restore_resolvconf_openwrt() {
remove_dns $OPENWRT_INTERFACE
}

=== resolv.conf handling via /sbin/resolvconf (Debian, Ubuntu, Gentoo)) =========

modify_resolvconf_manager() {
NEW_RESOLVCONF=""
for i in $INTERNAL_IP4_DNS; do
NEW_RESOLVCONF="$NEW_RESOLVCONF
nameserver $i"
done
if [ -n "$CISCO_DEF_DOMAIN" ]; then
NEW_RESOLVCONF="$NEW_RESOLVCONF
domain $CISCO_DEF_DOMAIN"
fi
echo "$NEW_RESOLVCONF" | /sbin/resolvconf -a $TUNDEV
}

restore_resolvconf_manager() {
/sbin/resolvconf -d $TUNDEV
}

=== resolv.conf handling via unbound =========

modify_resolvconf_unbound() {
if [ -n "$CISCO_DEF_DOMAIN" ]; then
/usr/sbin/unbound-control forward_add +i ${CISCO_DEF_DOMAIN} ${INTERNAL_IP4_DNS}
/usr/sbin/unbound-control flush_requestlist
/usr/sbin/unbound-control flush_zone ${CISCO_DEF_DOMAIN}
fi
}

restore_resolvconf_unbound() {
if [ -n "$CISCO_DEF_DOMAIN" ]; then
/usr/sbin/unbound-control forward_remove +i ${CISCO_DEF_DOMAIN}
/usr/sbin/unbound-control flush_zone ${CISCO_DEF_DOMAIN}
/usr/sbin/unbound-control flush_requestlist
fi
}

========= Toplevel state handling =======================================

kernel_is_2_6_or_above() {
case uname -r in
1.|2.[012345])
return 1
;;
*)
return 0
;;
esac
}

do_pre_init() {
if [ "$OS" = "Linux" ]; then
if (exec 6<> /dev/net/tun) > /dev/null 2>&1 ; then
:
else # can't open /dev/net/tun
test -e /proc/sys/kernel/modprobe && cat /proc/sys/kernel/modprobe tun 2>/dev/null
# fix for broken devfs in kernel 2.6.x
if [ "readlink /dev/net/tun" = misc/net/tun
-a ! -e /dev/net/misc/net/tun -a -e /dev/misc/net/tun ] ; then
ln -sf /dev/misc/net/tun /dev/net/tun
fi
# make sure tun device exists
if [ ! -e /dev/net/tun ]; then
mkdir -p /dev/net
mknod -m 0640 /dev/net/tun c 10 200
[ -x /sbin/restorecon ] && /sbin/restorecon /dev/net/tun
fi
# workaround for a possible latency caused by udev, sleep max. 10s
if kernel_is_2_6_or_above ; then
for x in seq 100 ; do
(exec 6<> /dev/net/tun) > /dev/null 2>&1 && break;
sleep 0.1
done
fi
fi
elif [ "$OS" = "FreeBSD" ]; then
if ! kldstat -q -m if_tun > /dev/null; then
kldload if_tun
fi

    if ! ifconfig $TUNDEV > /dev/null; then
        ifconfig $TUNDEV create
    fi
elif [ "$OS" = "GNU/kFreeBSD" ]; then
    if [ ! -e /dev/tun ]; then
        kldload if_tun
    fi
elif [ "$OS" = "NetBSD" ]; then
    :
elif [ "$OS" = "OpenBSD" ]; then
    if ! ifconfig $TUNDEV > /dev/null; then
        ifconfig $TUNDEV create
    fi
    :
elif [ "$OS" = "SunOS" ]; then
    :
elif [ "$OS" = "Darwin" ]; then
    :
fi

}

do_connect() {
if [ -n "$CISCO_BANNER" ]; then
echo "Connect Banner:"
echo "$CISCO_BANNER" | while read LINE ; do echo "|" "$LINE" ; done
echo
fi

set_vpngateway_route
do_ifconfig
if [ -n "$CISCO_SPLIT_INC" ]; then
    i=0
    while [ $i -lt $CISCO_SPLIT_INC ] ; do
        eval NETWORK="\${CISCO_SPLIT_INC_${i}_ADDR}"
        eval NETMASK="\${CISCO_SPLIT_INC_${i}_MASK}"
        eval NETMASKLEN="\${CISCO_SPLIT_INC_${i}_MASKLEN}"
        if [ "$NETWORK" != "0.0.0.0" ]; then
            set_network_route "$NETWORK" "$NETMASK" "$NETMASKLEN"
        else
            set_default_route
        fi
        i=`expr $i + 1`
    done
    for i in $INTERNAL_IP4_DNS ; do
        echo "$i" | grep : >/dev/null || \
            set_network_route "$i" "255.255.255.255" "32"
    done
elif [ -n "$INTERNAL_IP4_ADDRESS" ]; then
    set_default_route
fi
if [ -n "$CISCO_IPV6_SPLIT_INC" ]; then
    i=0
    while [ $i -lt $CISCO_IPV6_SPLIT_INC ] ; do
        eval NETWORK="\${CISCO_IPV6_SPLIT_INC_${i}_ADDR}"
        eval NETMASKLEN="\${CISCO_IPV6_SPLIT_INC_${i}_MASKLEN}"
        if [ $NETMASKLEN -lt 128 ]; then
            set_ipv6_network_route "$NETWORK" "$NETMASKLEN"
        else
            set_ipv6_default_route
        fi
        i=`expr $i + 1`
    done
    for i in $INTERNAL_IP4_DNS ; do
        if echo "$i" | grep : >/dev/null; then
            set_ipv6_network_route "$i" "128"
        fi
    done
elif [ -n "$INTERNAL_IP6_NETMASK" -o -n "$INTERNAL_IP6_ADDRESS" ]; then
    set_ipv6_default_route
fi

if [ -n "$INTERNAL_IP4_DNS" ]; then
    $MODIFYRESOLVCONF
fi

}

do_disconnect() {
if [ -n "$CISCO_SPLIT_INC" ]; then
i=0
while [ $i -lt $CISCO_SPLIT_INC ] ; do
eval NETWORK="${CISCO_SPLIT_INC_${i}ADDR}"
eval NETMASK="${CISCO_SPLIT_INC${i}MASK}"
eval NETMASKLEN="${CISCO_SPLIT_INC${i}MASKLEN}"
if [ "$NETWORK" != "0.0.0.0" ]; then
# FIXME: This doesn't restore previously overwritten
# routes.
del_network_route "$NETWORK" "$NETMASK" "$NETMASKLEN"
else
reset_default_route
fi
i=expr $i + 1
done
for i in $INTERNAL_IP4_DNS ; do
del_network_route "$i" "255.255.255.255" "32"
done
else
reset_default_route
fi
if [ -n "$CISCO_IPV6_SPLIT_INC" ]; then
i=0
while [ $i -lt $CISCO_IPV6_SPLIT_INC ] ; do
eval NETWORK="${CISCO_IPV6_SPLIT_INC${i}ADDR}"
eval NETMASKLEN="${CISCO_IPV6_SPLIT_INC${i}_MASKLEN}"
if [ $NETMASKLEN -eq 0 ]; then
reset_ipv6_default_route
else
del_ipv6_network_route "$NETWORK" "$NETMASKLEN"
fi
i=expr $i + 1
done
for i in $INTERNAL_IP6_DNS ; do
del_ipv6_network_route "$i" "128"
done
elif [ -n "$INTERNAL_IP6_NETMASK" -o -n "$INTERNAL_IP6_ADDRESS" ]; then
reset_ipv6_default_route
fi

del_vpngateway_route

if [ -n "$INTERNAL_IP4_DNS" ]; then
    $RESTORERESOLVCONF
fi


if [ -n "$IPROUTE" ]; then
    if [ -n "$INTERNAL_IP4_ADDRESS" ]; then
        $IPROUTE addr del "$INTERNAL_IP4_ADDRESS/255.255.255.255" peer "$INTERNAL_IP4_ADDRESS" dev "$TUNDEV"
    fi
    # If the netmask is provided, it contains the address _and_ netmask
    if [ -n "$INTERNAL_IP6_ADDRESS" ] && [ -z "$INTERNAL_IP6_NETMASK" ]; then
        INTERNAL_IP6_NETMASK="$INTERNAL_IP6_ADDRESS/128"
    fi
    if [ -n "$INTERNAL_IP6_NETMASK" ]; then
        $IPROUTE -6 addr del $INTERNAL_IP6_NETMASK dev $TUNDEV
    fi
else
    if [ -n "$INTERNAL_IP4_ADDRESS" ]; then
        ifconfig "$TUNDEV" 0.0.0.0
    fi
    if [ -n "$INTERNAL_IP6_ADDRESS" ] && [ -z "$INTERNAL_IP6_NETMASK" ]; then
        INTERNAL_IP6_NETMASK="$INTERNAL_IP6_ADDRESS/128"
    fi
    if [ -n "$INTERNAL_IP6_NETMASK" ]; then
        ifconfig "$TUNDEV" inet6 del $INTERNAL_IP6_NETMASK
    fi
fi

destroy_tun_device

}

Main

if [ -z "$reason" ]; then
echo "this script must be called from vpnc" 1>&2
exit 1
fi

case "$reason" in
pre-init)
run_hooks pre-init
do_pre_init
;;
connect)
run_hooks connect
do_connect
run_hooks post-connect
;;
disconnect)
run_hooks disconnect
do_disconnect
run_hooks post-disconnect
;;
reconnect)
run_hooks reconnect
;;
*)
echo "unknown reason '$reason'. Maybe vpnc-script is out of date" 1>&2
exit 1
;;
esac

exit 0

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment